Active joint torques are the primary source of power and control in dynamic walking motion. However the amplitude, rate, timing and phasic behavior of the joint torques necessary to achieve a natural and stable performance are difficult to establish. The goal of this study was to demonstrate the feasibility and stable behavior of an actively controlled bipedal walking simulation wherein the natural system dynamics were preserved by an active, nonlinear, state-feedback controller patterned after passive downhill walking. A two degree-of-freedom, forward-dynamic simulation was implemented with active joint torques applied at the hip joints and stance leg ankle. Kinematic trajectories produced by the active walker were similar to passive dynamic walking with active joint torques influenced by prescribed walking velocity. The control resulted in stable steady-state gait patterns, i.e. eigenvalue magnitudes of the stride function were less than one. The controller coefficient analogous to the virtual slope was modified to successfully control average walking velocity. Furture developments are necessary to expand the range of walking velocities.
Virtual Slope Control of a Forward Dynamic Bipedal Walker
Contributed by the Bioengineering Division for publication in the JOURNAL OF BIOMECHANICAL ENGINEERING. Manuscript received by the Bioengineering Division June 18, 2003; revision received July 28, 2004. Associate Editor: Kit Vaughan.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Russell , S., Granata, K. P., and Sheth, P. (March 8, 2005). "Virtual Slope Control of a Forward Dynamic Bipedal Walker ." ASME. J Biomech Eng. February 2005; 127(1): 114–122. https://doi.org/10.1115/1.1835358
Download citation file:
- Ris (Zotero)
- Reference Manager