The Orientation of trabecular bone specimens for mechanical testing must be carefully controlled. A method for accurately preparing on-axis cylindrical specimens using high-resolution micro-CT imaging was developed. Sixteen cylindrical specimens were prepared from eight bovine tibiae. High-resolution finite element models were generated from micro-CT images of parallelepipeds and used to determine the principal material coordinate system of each parallelepiped. A cylindrical specimen was then machined with a diamond coring bit. The resulting specimens were scanned again to evaluate the orientation. The average deviation between the principal fabric orientation and the longitudinal axis of the cylindrical specimen was only 4.70±3.11°.
Preparation of On-Axis Cylindrical Trabecular Bone Specimens Using Micro-CT Imaging
Contributed by the Bioengineering Division for publication in the JOURNAL OF BIOMECHANICAL ENGINEERING. Manuscript received by the Bioengineering Division June 23, 2003; revision received August 14, 2003. Associate Editor: P.V. Bayly.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Wang,, X., Liu, and , X., and Niebur , G. L. (March 9, 2004). "Preparation of On-Axis Cylindrical Trabecular Bone Specimens Using Micro-CT Imaging ." ASME. J Biomech Eng. February 2004; 126(1): 122–125. https://doi.org/10.1115/1.1645866
Download citation file:
- Ris (Zotero)
- Reference Manager