The anulus fibrosus (AF) of the intervertebral disc exhibits spatial variations in structure and composition that give rise to both anisotropy and inhomogeneity in its material behaviors in tension. In this study, the tensile moduli and Poisson’s ratios were measured in samples of human AF along circumferential, axial, and radial directions at inner and outer sites. There was evidence of significant inhomogeneity in the linear-region circumferential tensile modulus (17.4±14.3 MPa versus 5.6±4.7 MPa, outer versus inner sites) and the Poisson’s ratio (0.67±0.22 versus 1.6±0.7, outer versus inner), but not in the axial modulus (0.8±0.9 MPa) or the Poisson’s ratios (1.8±1.4) or (0.6±0.7). These properties were implemented in a linear anisotropic material model of the AF to determine a complete set of model properties and to predict material behaviors for the AF under idealized kinematic states. These predictions demonstrate that interactions between fiber populations in the multilamellae AF significantly contribute to the material behavior, suggesting that a model for the AF as concentric and physically isolated lamellae may not be appropriate.
Anisotropic and Inhomogeneous Tensile Behavior of the Human Anulus Fibrosus: Experimental Measurement and Material Model Predictions
Contributed by the Bioengineering Division for publication in the JOURNAL OF BIOMECHANICAL ENGINEERING. Manuscript received by the Bioengineering Division December 27, 1999; revised manuscript received December 21, 2000. Associate Editor: G. A. Ateshian.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Elliott, D. M., and Setton, L. A. (December 21, 2000). "Anisotropic and Inhomogeneous Tensile Behavior of the Human Anulus Fibrosus: Experimental Measurement and Material Model Predictions ." ASME. J Biomech Eng. June 2001; 123(3): 256–263. https://doi.org/10.1115/1.1374202
Download citation file:
- Ris (Zotero)
- Reference Manager