... to demonstrate process capability and consistency. Titanium Alloys Vacuum Arc Melting Plasma Arc Melting Forging Hot Rolling Cold Forming Ultrasonic Inspection Thermomechanical Processing Mechanical Properties Microstructure Robert M. Davis I and Robin M. Forbes Jones 2 MANUFACTURING PROCESSES...

... Distribution Pressurized Thermal Shock Ultrasonic Inspection Fracture Mechanics Stan T. Rosinski, I Eugenia L. Kennedy, 2 and Jude R. Foulds 2 DEVELOPMENT AND APPLICATION OF AN LWR REACTOR PRESSURE VESSEL-SPECIFIC FLAW DISTRIBUTION REFERENCE: Rosinski, S. T., Kennedy, E. L. Foulds, J. R., "Development...

... tubes were inspected with a specially designed ultrasonic head, and responses were correlated with metallographic information. The ultrasonic inspection system was capable of detecting cracks as small as 0.15 mm deep in small blisters. This gives some expectation that inspection will be able to identify...

... This work describes the ultrasonic inspection of silicon carbide whisker and particulate reinforced aluminum metal matrix composite billets, extrusions, forgings, and rolled plate and sheet. Inspection techniques will be described and results discussed including metallographic analysis of flaws...

... with the vacuum arc remelting capability and its associated, high-integrity ultrasonic inspection unit. Improvements in steel cleanliness achievable with these manufacturing facilities have been assessed in terms of lower oxygen levels, better microcleanliness, and higher fatigue lives. bearing steels...

... ultrasonic waveforms reflected from the corroded area and determines the thickness. The system was tested and successfully operated in a harbor environment. corrosion nondestructive testing ultrasonics underwater ultrasonic inspection Anmol Birring I Corrosion Monitoring of Underwater Steel...

... was examined for the case of bearing deformations at temperatures of 21 and 177°C. Ultrasonic inspection techniques were used to assure material integrity and to verify post test damage and failure mode. graphite/polyimide composite material bolted joint ultrasonic inspection creep strain rate...

... not prove effective in the application where cohesive failure was an insignificant failure-mode fraction. Furthermore, liquid couplant required for ultrasonic inspection was considered undesirable because of its possible adverse effect on subsequent product processibility. This restriction, along...