... effect was observed in the FEA models to occur at the joint interface corners, and therefore the theoretical model over-predicted failure load by up to 22% for 2.08 mm bondline carbon/epoxy adherends. adhesively bonded joint plasticity failure prediction in-plane shear Hyonny Kim i...

..., obtained from the U.S. Federal Aviation Administration, under uniform pressure. They used a nonlinear finite element analysis technique for thin plates coupled with failure prediction techniques that underlay ASTM Practice for Determining the Load Resistance of Glass in Buildings (E 1300-00) to develop...

... hygrothermal conditions free-edge stresses delamination analytical global-local model failure prediction fatigue (materials) fracture (materials) composite materials Allan S. C r a s t o 1 and Ran Y g i m I Hygrothermal Influence on the Free-Edge Delamination of Composites Under Compressive Loading...

... below the lower stress limit. failure prediction design stresses medical plastics creep upper stress limit lower stress limit creep rupture modeling S. H. Teoh ~ Predicting the Life and Design Stresses of Medical Plastics Under Creep Conditions REFERENCE: Teoh, S. H., "Predicting the Life...

... materials bolted joints nonlinear finite-element analysis failure prediction Robert A. Jurf 1and Jack R. Vinson 2 Failure Analysis of Bolted Joints in Composite Laminates REFERENCE: Jurf, R. A. and Vinson, J. R., "Failure Analysisof Bolted Joints in Composite Laminates," Composite Materials: Testing...

... methods biaxial testing of composites fracture of composites graphite/epoxy composite laminates with cracks failure modes birefringent coatings moiré grids effect of crack length failure prediction crack-opening displacement crack-shearing displacement composite materials /. M. Daniel...

..., materials with an average variability ( m < 40) will yield Split-D test results above 90 percent of the true strength. composite materials rings tension tests stress analysis unidirectional strength failure prediction C. E. Knight, Jr.' Failure Analysis of the Split-D Test Method REFERENCE...