... strength split tensile strength flexural bond frost damage unidirectional freeze-thaw test frost resistance cooling rate Young's modulus modulus of elasticity air content Vicat cone Lyne Fontaine,1 Margaret L. Thomson, 2 and Gary T. Suter 3 Practice and Research: The Need for Standards...

... with plots of percentages of single and nested yellow and amber crystals, plus crystals with abundant dotlike impurities. Both single and nested crystals exhibit these relationships with 28-day strength. alite belite belite color cement clinker cooling rate microscopy mortar strength Ono Method...

... results if water is used for temperature conditioning. acetone air charpy V-notch cooling rate evaporation methanol nitrogen gas oil thermal conditioning water Randy K. Nanstad, Ronald L. Swain, and Reynold G. Berggren INFLUENCE OF THERMAL CONDITIONING MEDIA ON CHARPY SPECIMEN TEST...

... will be discussed, along with the effects of certain processing parameters such as supercooling, supersaturation, or cooling rate. The key requirements for suitable organic models of aluminum solidifcation are that they possess cubic centrosymmetry (face-centered cubic or body-centered cubic), relatively low...

.... Fracture surfaces of these fabricated materials are described, as well as the effect of microvoids on fracture. aluminum alloys powder metallurgy rapid solidification dispersion hardening transition elements intermetallic phases melt-spun ribbon cooling rate undercooling Zone A Zone B...

... cooling rate eutectics ferrites ferroalloys graphite granular material hypereutectic hypoeutectic inoculation iron carbide magnesium containing alloy microstructure pearlite precipitation rare-earth metal solidification M. J. Lalich' and W. D. Glover' Properties and Uses of Alloy...

... of specimens after heat treatment produced carrier lifetimes that were unstable with the time elapsed after quenching. carrier lifetime silicon heavy metal impurities oxidation annealing cooling rate vacancy reactions K. Graff and H. Pieper^ Carrier Lifetime Measurements for Process Monitoring...

... in the data analysis. Controlled cooling was used to approximate gage effects, and the makeup of microstructure was studied by lineal analysis. Equations were generated from the experimental data to predict the microstructure as a function of carbon equivalent and cooling rate. These predictions are verified...

... with improved conductor adhesion. thick films adhesion soldering manufacturing variability temperature cycling cooling rate conductivity S. Schroter 1 Adherence Measurements and Evaluation of Thick-Film Platinum-Gold REFERENCE: Schroter, S., "Adherence Meuurements and Evaluation of ThickFilm...