... failure analysis coatings chemical analysis ancillary tests case studies microscopy 172 ADVANCES IN CEMENT ANALYSIS AND CONCRETE PETROGRAPHY STP 1613, 2019 / available online at www.astm.org / doi: 10.1520/STP161320180002 Ronald D. Sturm1 and Jamison T. Langdon1 Thinking Outside the Petrographic...

... There are about 50 chemical analysis test method used for the characterization of biofuels. They are summarized in this chapter, including significance of the tests, principles underlying the analysis, and test method precision. chemical analysis biofuels ...

... diagram). Zr-2.5Nb pressure tubes zirconium alloys nuclear reactor materials neutron irradiation deformation creep growth flux temperature X-ray diffraction microstructure texture grain size oxygen chemical analysis statistical analysis predictive models rate theory M. Griffiths...

... BNFL Magnox Generation Group is sampling irradiated submerged-arc weld metal from the reactor pressure vessel at Trawsfynydd Power Station, which is currently being decommissioned. Chemical analysis has shown that the sampled weld is typical of previously sampled submerged-arc weld...

... of suitable provisions during normal operation before thermal annealing is also discussed. annealing radiation embrittlement recovery chemical analysis hardness transition temperature [mdovit Kup&t I and Stefan Cep(ek 2 Thermal Annealing of the Reactor Pressure Vessel NPP Unit 2 in Jaslovske...

... or contaminated, it can further be identified and dealt with before a serious problem develops. This eliminates much wasted manufacturing time and material. spectroscopy infrared—Fourier transform chemical analysis coatings cure measurement durability measurement quality assurance Jack H. Hartshorn...

... mixture chemical analysis laser desoprtion GC/FTMS David A. Laude, Jr. and Jeremiah D. Hogan FOURIER TRANSFORM MASS SPECTROMETRY FOR ANALYSIS OF ORGANIC MIXTURES REFERENCE: Laude, D. A., Jr. and Hogan, J. D., "Fourier Transform Mass Spectrometry for Analysis of Organic Mixtures, " Monitoring Water...

... Inspection of a new liquid oxygen (LOX) component revealed that it was not visibly clean. A sampling procedure was developed to sample the contaminant for chemical analysis, the composition of the contaminant was determined, and the component was cleaned. Finally, an assessment is made...

... and magnesium salts can be demonstrated. A number of concrete and experienced examples are presented. limestone dolomite carbon dioxide calcium carbonate magnesium carbonate aggregates soils determination chemical analysis Freddy Choquet, 1 Emmanuel Ista, 1 and Andrd F. Verhasselt t...

... equipment. oxygen bearing steels inclusions chemical analysis W. B. Green, Jr B. I. Diamondstone,^ and Joseph J. C. Hoo^ Current Status of Round-Robin Testing of Oxygen Content in Bearing Steels REFERENCE: Green, W. B., Jr., Diamondstone, B. I., and Hoo, J. J. C, "Current Status of Round-Robin...

...). The efficiency of hydrogen recovery by a bubble is affected by the bubble size, the hydrogen concentration, and the ascending distance. The bubble size is determined by the flow rate and the nozzle size. hydrogen measurement iron steel molten metal chemical analysis in-situ measurement Takashi...

... analysis programs. suspended sediment dewatering chemical analysis trace metals river water Arthur J. Horowitz^ An Examination of IVIethods for the Concentration of Suspended Sediment for Direct Metal Analysis REFERENCE: Horowitz, A. "An Examination of Metliods for the Concentration...

... of the level of analytical accuracy required, and prior to establishing a standard number of volumes to be removed for purging prior to sampling for any well. ground water sampling water quality purging chemical analysis observation wells well completion water removal Andrew W. Panko^ and Peter...

... to calibration is presented. calibration chemical analysis intercalibration linear relationships measurements quality assurance standardization air quality sampling atmospheric measurements John K. Taylor^ Principles of Calibration REFERENCE: Taylor, J. K., "Principles of Calibration," Sampling...

... of Future Trends in tfie Area of Connputer-Controlled Autonnation of Analytical Chennistry Methods REFERENCE: Fricioni, R. B., "Microprocessor-Based Determinator Design and the Impact of Future Trends in tlie Area of Computer-Controlled Automation of Analytical Chemisti? Methods," Chemical Analysis...

... years, examples of the applicability of the “interdependence” theme to base metal analysis are also provided. chemical analysis instrumental methods interdependence Silve Kallmann^ Interdependence of Chemical and Instrumental Methods of Analysis REFERENCE: Kallmann, S., "Interdependence...

... the same specimens. hazardous wastes chemical analysis toxicity data comparison landfill disposal International Iron and Steel Institute leaching-test procedures Jiirgen A. Philipp,' Ralf Endell, ^ Jean Raguin,^ and Oliver Dechelette^ Leaching Test Characterization of Iron and Steel Industry...

... protective clothing decontamination chemical analysis S. Kay Obendorf I and Camille M. Solbrig I Distribution of Malathion and Methyl Parathion on Cotton/Polyester Unfinished and Durable-Press Fabrics Before and After Laundering as Detr by Electron Microscopy REFERENCE: Obendorf, S. K. and Solbrig, C. M...

... of metal in excess of the capacity of organic ligands for complexation and in not allowing reactions to attain equilibrium. bioavailability metals natural waters sediment review bioassays water quality criteria chemical analysis speciation John R. O 'Donnel,l Brian M. Kaplan,' and Herbert...

... weight is lost after 120 ± 15 months of implantation in humans. implant materials biological degradation fatigue (materials) biodeterioration bursting strength carboxylic acids chemical analysis depolymerization dimensional stability implantation infrared spectroscopy molecular weight...