... sorbitan monooleate N-octylpyrrolidone amitraz carbodiimide Stabaxol I ® epoxidized vegetable oil sorbitol glycerol gel prevention dessicants calcium oxide twin pack cattle-dip soluble buffers sodium carbonate Journal of ASTM International, February 2006, Vol. 3, No. 2 Paper ID JAI12912...

... mass. This levitation of the fuel mixture provides for more efficient combustion and also enhances the reaction of the calcium oxide with the sulfur oxides that evolve from the coal. Analysis of both the fly ash and bed ash resulting from the combustion should provide a measure of the effectiveness...

... equipment and environmental concerns over the disposal of soluble sodium sulfite and sodium sulfate waste have precluded their use. The availability of a highly reactive calcium oxide for dry SO 2 absorption would offer substantial economic and environmental benefits. This paper discusses the development...

... A modified hot-filament microscope is used for direct observation of the solution of calcium oxide (CaO) in synthetic melts simulating slags of metallurgical interest. In the CaO-SiO 2 system the process is uncomplicated in acid slags. However, in basic slags, when the composition approaches...

... the results of one test to be translated into those of the other test. A scaled-down version of the titration test also was developed which duplicated the results of the full-scale test. characteristics testing burning slaking volumetric analysis reactivity evaluation tests calcium oxide water...

... oxide content. The specifications are realistic and can be met by commericial suppliers of lime. calcium oxide metallurgical furnaces reactivity tests roasting slags specifications reaction kinetics evaluation steelmaking R. W. Limes ~ and R. O. Russell ~ Crucible Test for Lime...

... against reburning and C 2 S-formation. The acceleration of lime dissolution and the resulting improvement of the metallurgical reactions lead to a reduction of the blowing time. steelmaking calcium oxide combustion reactivity magnesium oxide sulfur oxides slags metallurgical furnace...

.... curing environments weather laboratories carbonation moisture mortars (material) cements calcium oxide compressive strength assessments evaluation tests J. 1. D a v i s o n ~ Curing of Cement-Lime Mortars* REFERENCE: Davison, J. I., "Curing of Cement-Lime Mortars," The Reaction Parameters...

... above 1000 C the calcium oxide crystals sintered and grew in size as the pore size continued to increase and the surface area decreased. The larger initial crystallite size of the Iceland spar resulted in an unfavorable pore size distribution in its calcined products prepared below 1000 C...