... and cross-sectional areas of the final thermoplastic parts. ABS thermoplastic nylon electrophotography additive manufacturing STEP SEM density thermal 180 PROGRESS IN ADDITIVE MANUFACTURING 2020 STP 1637, 2022 / available online at www.astm.org / doi: 10.1520/STP163720200117 Brian D...

... compensation model in terms of Nb redistribution and its compensation effect on oxide space charges. The effect of irradiation on corrosion kinetics of Zr-Nb alloys is discussed in the light of experimental and modeling results. irradiation effect TEM SEM Zr-Nb alloys corrosion ZIRCONIUM...

... A method to confirm FEA strain level predictions was developed for small nitinol-compressive specimens by taking micron magnitude measurements from SEM images. The technique was used to confirm predictions of an earlier report of fatigue resistance. fatigue nitinol compressive SEM...

.... Constituent particles competed with corrosion pits as critical crack nucleation sites. Post-fracture analysis confirmed the presence of noncritical cracks within the corroded region, related to pitting and constituent particles. aluminum corrosion fatigue pitting corrosion SEM Kimberli Jones1...

... ANOVA XPS FTIR SEM optical microscopy Journal of ASTM International, July/August 2005, Vol. 2, No. 7 Paper ID JAI12812 Available online at www.astm.org E.A. Yamokoski,1 B.W. Buczynski,1 N. Stojilovic,2 J.W. Seabolt,3 L.M. Bloe,4 R. Foster,4 N. Zito,4 M.M. Kory,5 R.P. Steiner,6 and R.D. Ramsier7...

..., the formation of sulfate surface species could be monitored quantitatively with monolayer sensitivity and a significant increase in reaction kinetics could be discerned. iron IRAS QCM O 3 SO 2 corrosion in-situ AFM SEM Jonas Weissenrieder 1and Christofer Leygraf2 ln-situ Studies...

... additional information was obtained by SEM and EDAX analysis. It seems that there is a difference in the way each solution simulates the behavior of steel, because the passive films formed show dissimilar topography, composition and anticorrosion protectiveness. The presence of chloride ions allows one...

... in a general survey of maintenance workers. passive sampler asbestos fibres measurement comparability membrane filter PCM SEM TEM Garry J. Burdett and Graham Revell STRATEGY, DEVELOPMENT AND LABORATORY CALIBRATION OF A PERSONAL PASSIVE SAMPLER FOR MONITORING THE ASBESTOS EXPOSURE...

..., thermal pitting, and edge chipping. cutting insert tool life wear mechanism milling SEM Jie Gu, ~ Simon C. Tung, 2 and Gary C. Barber 3 WEAR MECHANISMS OF MILLING INSERTS: DRY AND WET CUTI'ING Reference: Gu, J., Tung, S. C., Barber, G. C., "Wear Mechanisms of Milling Inserts: Dry and Wet...

... microscopy (SEM), X-ray diffraction (XRD), and electrochemical impedance (EIS). The SEM and some of the XRD investigations of the oxide were performed on the metal-oxide interface after dissolution of the metal. The oxide growth developed through three different stages with an altered oxide morphology...

... the house were not identical. It was suggested that further analysis be conducted to continue characterization of the foam. characterization density foam insulation magnesium oxychloride cement moisture content SEM shrinkage thermal analysis thermal conductivity X-ray diffraction Walter J...

... spectroscopy fracture mode SEM effect of impurities microstructure minor elements pressure vessel 461 12 1 0. C. deHodgins ' and B. L. Shriver ANALYSIS OF FRACTURE SURFACES OF REACTOR PRESSURE-VESSEL STEELS REFERENCE: deHodgins, 0. C. and Shriver, B. L., "Analysis of Fracture Surfaces of Reactor...