1-18 of 18
Keywords: Charpy test
Close
Sort by
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 2018
ISBN: 978-0-8031-7653-9
... adhesive bonding elastic bonding impact damping repetitive impact testing Charpy test thick-film adhesive boosted polyurethane 122 DURABILITY OF BUILDING AND CONSTRUCTION SEALANTS AND ADHESIVES: 6TH VOLUME STP 1604, 2018 / available online at www.astm.org / doi: 10.1520/STP160420170125 Gregor...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 2006
ISBN-10: 0-8031-3402-9
ISBN: 978-0-8031-3402-7
... force deflection absorbed energy Charpy test Journal of ASTM International, February 2006, Vol. 3, No. 2 Paper ID JAI12867 Available online at www.astm.org Michael P. Manahan, Sr., Sc.D.1 and Thomas A. Siewert, Ph.D.2 The History of Instrumented Impact Testing ABSTRACT: Pendulum impact testing...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 2000
ISBN-10: 0-8031-2864-9
ISBN: 978-0-8031-2864-4
... loss during bath transfer and to compare with the uniform temperature field produced by the in-situ system. Measurements are also presented which show a factor-of-two improvement in specimen alignment can be easily achieved with the in-situ system centering tool. impact testing Charpy test...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 2000
ISBN-10: 0-8031-2864-9
ISBN: 978-0-8031-2864-4
.... Charpy test impact instrumented impact testing fracture toughness crack resistance curve single-specimen method key-curve method dynamic material behavior Wolfgang B6hme Iand Hans-Jakob Schindler2 Application of Single-Specimen Methods on Instrumented Charpy Tests: Results of DVM Round-Robin...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 2000
ISBN-10: 0-8031-2850-9
ISBN: 978-0-8031-2850-7
... these limitations have been proposed. In addition, an important potential limitation of the Izod test, specimen clamping pressure, has been studied. instrumented impact test Charpy test Izod test fracture resistance striker strain gages dynamic testing Michael P. Manahan, Sr.) Carlos A. Cruz, Jr., 2...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 2000
ISBN-10: 0-8031-2852-5
ISBN: 978-0-8031-2852-1
... and lowest hardness, respectively. Charpy test sub-sized specimen heat affected zone irradiation embrittlement ductile-brittle transition temperature pressure vessel steel Tetsuya Suzuki, ~Keisuke Itoh,2Yoshinobu Naruse,2Hideki Matsui, 3and Akihiko Kimura1 Effect of Location of V-Notch...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1999
ISBN-10: 0-8031-2614-X
ISBN: 978-0-8031-2614-5
... be monitored by positron annihilation lineshape analysis but detectability is dependent on the materials. neutron embrittlement pressure vessel steel positron annihilation Doppler broadening lattice defect tensile test Charpy test Noriko NakamuraI,Yoshio OhtaI,Kazuo Yoshida2,and NoriyoshiMaeda3...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1998
ISBN-10: 0-8031-2476-7
ISBN: 978-0-8031-2476-9
... Current activities to standardize the instrumented Charpy test (proposed procedure recently accepted by ISO) and to propose a standardized procedure for instrumented subsized Charpy tests are the background of several round robin exercises of ASTM, ESIS and DVM. The IWM-results are presented...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1998
ISBN-10: 0-8031-2476-7
ISBN: 978-0-8031-2476-9
..., impact properties are the worst at a HAZ location 4mm away from the boundary (M4). Normalization of the USE is successfully done by a curve fitting method. There observed linear relationships between DBTTs obtained using standard and sub-sized specimens of base metal, deposit and HAZ. Charpy test...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1993
ISBN-10: 0-8031-1869-4
ISBN: 978-0-8031-1869-0
... developed to produce both conventional and miniaturized Charpy specimens. This paper reports on early laser welding development efforts and summarizes previous proof-of-principle experiments on a 1/16 scale miniaturized Charpy test. In order to benchmark the laser welding procedure, the laser-reconstituted...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1993
ISBN-10: 0-8031-1869-4
ISBN: 978-0-8031-1869-0
... and numerical steps are presented towards the evaluation of dynamic J-R curves from the results of instrumented Charpy tests. micromechanical material models fracture toughness J -resistance curves steel weld material irradiation surveillance program primary circuit CT specimens WOL-X-specimens...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1993
ISBN-10: 0-8031-1867-8
ISBN: 978-0-8031-1867-6
..., but more efficiently characterize the worst case of a highly constrained crack in a thick pipe. rapid crack propagation polyethylene pipelines crack arrest brittle fracture Charpy test dynamic crack resistance fracture mechanics fatigue (materials) Patrick S. Leevers, I pa#a Yayla, t...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1993
ISBN-10: 0-8031-1478-8
ISBN: 978-0-8031-1478-4
... This paper presents preliminary results of an ongoing research program that the Italian Committee for Research and Development of Nuclear Energy and Alternative Energies (ENEA) started in the framework of the previous Nuclear Energy Plan. A total of 25 tension tests, 162 Charpy tests, 56 K Id...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1990
ISBN-10: 0-8031-5112-8
ISBN: 978-0-8031-5112-3
... For fast breeder reactor core materials, the main limitations are usually swelling and irradiation embrittlement. Tension tests and Charpy tests performed on CW Titanium modified 316 (CW 316 Ti) wrappers irradiated in Phenix at up to 100 dpa nrt provide strong evidence of a correlation between...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1990
ISBN-10: 0-8031-1277-7
ISBN: 978-0-8031-1277-3
...)] in the HAZ of the ferritic welds and 400 HV in the HAZ of the austenitic welds, no hydrogen cracking or brittle fracture behavior was observed. Generally, the Charpy tests indicated upper-shelf fracture behavior at -2°C (28°F), and the HAZ was found to be tougher than the weld metal. Crack-tip opening...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1990
ISBN-10: 0-8031-1295-5
ISBN: 978-0-8031-1295-7
... temperatures for the pre-cracked specimens. AAR M128 steel ASTM A212 steel Charpy test fatigue pre-crack instrumented impact test transition temperature B. Anne Fields, Samuel R. Low, III, and James G. Early THE EFFECT OF FATIGUE PRE-CRACKING VERSUS V-NOTCHING ON IMPACT TESTING OF CHARPY...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1986
ISBN-10: 0-8031-0937-7
ISBN: 978-0-8031-0937-7
... in single-blow impacts, indicate that different energy absorption processes occur in single- and multiple-impact testing. impact testing fatigue nylon acrylonitrile-butadiene-styrene (ABS) high-impact polystyrene (HIPS) Charpy test fracture energy George C. Adams^ Impact Fatigue of Polymers...
eBook Chapter
Series: ASTM Selected Technical Papers
Publisher: ASTM International
Published: 1986
ISBN-10: 0-8031-0487-1
ISBN: 978-0-8031-0487-7
... toughness data are in excellent agreement with measured values. nil-ductility transition temperature fracture Charpy test test method interrelationships drop-weight test ASTM standard E 208 William Oldfield^ and William L. Server^ NDTT, RTNDT, and Fracture Toughness: A Study...