Skip Nav Destination
ASTM Selected Technical Papers
Thermomechanical Fatigue Behavior of Materials: 4th Volume
By
MA McGaw,
MA McGaw
1
McGaw Technology, Inc.
?Fairview Park, Ohio Symposium Co-Chairman and Editor
Search for other works by this author on:
S Kalluri,
S Kalluri
2
Ohio Aerospace Institute NASA Glenn Research Center
at Lewis Field Brook Park, Ohio Symposium Co-Chairman and Editor
Search for other works by this author on:
J Bressers,
J Bressers
3
Institute for Energy, JRC-EC
(Retired) Petten,
The Netherlands
Symposium Co-Chairman and Editor
Search for other works by this author on:
SD Peteves
SD Peteves
4
Institute for Energy, JRC-EC
?Petten,
The Netherlands
Symposium Co-Chairman and Editor
Search for other works by this author on:
ISBN-10:
0-8031-3467-3
ISBN:
978-0-8031-3467-6
No. of Pages:
336
Publisher:
ASTM International
Publication date:
2003
eBook Chapter
Thermo-mechanical Creep-Fatigue of Coated Systems
By
L Rémy
,
L Rémy
1
Director of Research
, CNRS. Centre des Matériaux, P. M. Fourt, UMR CNRS 7633, ENSMP (École Nationale Supérieure des Mines de Paris)
, P.O. Box 87, 91003 Évry Cédex
.France
Search for other works by this author on:
AM Alam
,
AM Alam
2
ALSTOM (Power)
, Brown Boveri Strasse 7
, CH-5401 Baden AG
.Switzerland
Search for other works by this author on:
A Bickard
A Bickard
3
CRYOSTAR
France ZI
-BP 48, 68220 Hesingue,
.France
Search for other works by this author on:
Page Count:
14
-
Published:2003
Citation
Rémy, L, Alam, A, & Bickard, A. "Thermo-mechanical Creep-Fatigue of Coated Systems." Thermomechanical Fatigue Behavior of Materials: 4th Volume. Ed. McGaw, M, Kalluri, S, Bressers, J, & Peteves, S. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2003.
Download citation file:
This paper presents an investigation of the damage mechanisms in protective coatings deposited on a single crystal superalloy, under TMF (thermo-mechanical fatigue) loading conditions. This includes an aluminide coating called C1A and a Thermal Barrier Coating (TBC). Different TMF cycles are used to assess the coating resistance in both cases and respective damage mechanisms are reported. TMF cycles derived from real service conditions prove to be better testing methods for coating resistance as compared to standard cyclic oxidation tests without mechanical loading. Implications for lifing procedures are tentatively discussed from the results of this investigation.
References
1.
Duret-Thual
, C.
, Morbioli
, R.
, and Steinmetz
, P.
, “A Guide to the Control of High Temperature Corrosion and Protection of Gas Turbine Materials
,” Report EUR 10682 EN CEC, Luxembourg, 1986
.2.
Guédou
, J-Y.
and Honnorat
, Y.
, “Thermomechanical Fatigue of Turbo-Engine Blade Superalloys
,” Thermomechanical Fatigue Behavior of Materials
, ASTM STP 1186, Sehitoglu
H.
, Ed., ASTM International
, West Conshohocken, PA
, 1993
, pp. 157–175.3.
Bickard
, A.
, Ph. D. Thesis, Ecole des Mines de Paris
, 1998
.4.
Bickard
, A.
and Rémy
, L.
, “High Temperature Fatigue Behavior of a Thermal Barrier Coating on a Single Crystal Superalloy
,” Conference at Edinburgh, 23–25 Sept. 1997, Proceedings of the 6th International Conference on High Temperature Surface Engineering
, Nicholls
J. R.
, Rickerby
D. S.
, and Allen
D.
, Eds., The Institute of Materials
, London
, 2000
, pp. 183–198.5.
Malpertu
, J. L.
and Rémy
, L.
, “Influence of Test Parameters on the Thermal-Mechanical Fatigue Behavior of a Superalloy
,” Metallurgical Transactions A
, Vol. 21A
, 1990
, pp. 389–399.6.
Koster
, A.
, Fleury
, E.
, Vasseur
, E.
, and Rémy
, L.
, “Thermal-Mechanical Fatigue Testing
,” Automation in Fatigue and Fracture: Testing and Analysis
, ASTM STP 1231, Amzallag
C.
, Ed., ASTM International
, West Conshohocken, PA
, 1994
, pp. 563–580.7.
Bernard
, H.
and Rémy
, L.
, “Advanced Materials and Process
,” EUROMAT 89
, Exner
H. E.
and Schumacher
V.
, Eds., DGM
, Oberursel
, Vol. 1
, 1990
, pp. 529–534.8.
Chataigner
, E.
and Rémy
, L.
, “Thermomechanical Fatigue Behavior of Coated and Bare Nickel-Based Superalloy Single Crystals
,” Thermo-mechanical Fatigue behavior of Materials: 2nd Volume
, ASTM STP 1263, Verrilli
M. J.
and Castelli
M. G.
, Eds., ASTM International
, West Conshohocken, PA
, 1996
, pp. 3–23.9.
Wright
, P. K.
, Materials Science and Engineering
. Vol. 16
, 1975
, pp. 5–43.10.
Evans
, A. G.
and Hutchinson
, J. W.
, International Journal of Solids and Structures
0020-7683, Vol. 20
, 1984
, pp. 455–466.11.
Bernard
H.
, Rémy
L.
, “Ductile-Brittle Transition of an Aluminide Coating on IN100 Superalloy
,” High Temperature Materials for Power Engineering 1990 Conference, Liege, 24–27 September 1990, Proceedings
, Bachelet
E.
, Brunetaud
R.
, Coutsouradis
D.
, et al, Eds., Kluwer Academic Publishers
, Dordrecht, The Netherlands
, Part II, pp. 1185–1194.12.
Bressers
, J.
, Timm
, J.
, Williams
, S.
, Bennett
, A.
, and Affeldt
, E.
, “Effects of Cycle Type and Coating on the TMF Lives of a Single Crystal Nickel Based Gas Turbine Blade Alloy
,” Thermo-mechanical Fatigue Behavior of Materials: 2nd Volume
, ASTM STP 1263, Verrilli
M. J.
and Castelli
M. G.
, Eds., ASTM International
, West Conshohocken, PA
, 1996
, pp. 56–67.13.
Rémy
, L.
, Koster
, A.
, Chataigner
, E.
, and Bickard
, A.
, “Thermal-Mechanical Fatigue and the Modelling of Materials Behaviour Under Thermal Transients
,” Thermo-mechanical Fatigue Behavior of Materials: Third Volume
, ASTM STP 1371, Sehitoglu
H.
and Maier
H. J.
Eds., ASTM International
, West Conshohocken, PA
, 1999
, pp. 223–238.
This content is only available via PDF.
You do not currently have access to this chapter.
Email alerts
Related Chapters
A European Round Robin in Thermo-mechanical Fatigue Behavior of a 9% Cr Low Activation Ferrite-Martensite Steel
Thermo-mechanical Fatigue Behavior of Materials: Third Volume
Effects of Cycle Type and Coating on the TMF Lives of a Single Crystal Nickel Based Gas Turbine Blade Alloy
Thermomechanical Fatigue Behavior of Materials: Second Volume
Techniques for Mechanical and Thermal Testing of Ti 3 Al/SCS-6 Metal Matrix Composites
Metal Matrix Composites: Testing, Analysis, and Failure Modes
Influence of the Mechanical Strain Amplitude on the In-Phase and Out-of-Phase Thermo-mechanical Fatigue Behaviour of NiCr22Co12Mo9
Thermo-mechanical Fatigue Behavior of Materials: Third Volume
Related Articles
Manufacturing Optimization for Bondcoat/Thermal Barrier Coating Systems
J. Eng. Gas Turbines Power (February,2010)
Preliminary Testing of Metal-Based Thermal Barrier Coating in a Spark-Ignition Engine
J. Eng. Gas Turbines Power (July,2010)