Skip Nav Destination
100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2002.
ASTM Selected Technical Papers
Small Specimen Test Techniques: Fourth Volume
By
MA Sokolov,
MA Sokolov
editor
1
Oak Ridge National Laboratory
?Oak Ridge, TN,
USA
Search for other works by this author on:
JD Landes,
JD Landes
editor
2
University of Tennessee
?Knoxville, TN,
USA
Search for other works by this author on:
GE Lucas
GE Lucas
editor
3
University of California
?Santa Barbara, CA,
USA
Search for other works by this author on:
ISBN-10:
0-8031-2897-5
ISBN:
978-0-8031-2897-2
No. of Pages:
504
Publisher:
ASTM International
Publication date:
2002
Description
STP 1418 features a global review of the latest research in small volume specimen testing. 31 peer-reviewed papers from an international collection of experts cover:
Fracture Toughness explores the effects of specimen size and geometry on constraint, which affects the ability to extract meaningful fracture toughness from small specimens.
Small Size Charpy V-Notch Specimens endeavors to develop correlations between full size specimens and a wide variety of subsized specimen geometries, down to some with cross sections of 1.5 mm x 1.5 mm.
Mechanical Properties describes techniques for extracting mechanical properties from a wide range of materials, including metals and composites.
Small Punch Test describes techniques to obtain mechanical and microstructural data. Two general categories of small punch tests are presented: 1) disk bend tests, where a spherical penetrator deforms a circumferentially-supported disc specimen, and 2) shear punch tests, where a flat-ended cylindrical punch blanks a hole in a clamped coupon specimen
Reconstitution Techniques describes various reconstitution techniques on subsized Charpy V-notch (CVN) specimens, including a large multi-lab European effort (RESQUE--Reconstitution Techniques Qualification and Evaluation Study).
STP 1418 is an important resource for nuclear engineers, materials testing engineers, fracture mechanics professionals, and researchers in engineering of structural components.
Sokolov, M, Landes, J, & Lucas, G.
Small Specimen Test Techniques: Fourth Volume. ISBN-10: 0-8031-2897-5
ISBN: 978-0-8031-2897-2
No. of Pages: 504
ISBN (electronic): 978-0-8031-5465-0
Publisher: ASTM International
Published: 2002
Download citation file:
Table of Contents
-
Fracture Toughness Measurements in the Transition Region Using Sub-Size Precracked Charpy and Cylindrical Bar SpecimensByE Lucon,E Lucon1SCK•CEN,Boeretang 200, B-2400 MOL()BelgiumSearch for other works by this author on:M Scibetta,M Scibetta1SCK•CEN,Boeretang 200, B-2400 MOL()BelgiumSearch for other works by this author on:R Chaouadi,R Chaouadi1SCK•CEN,Boeretang 200, B-2400 MOL()BelgiumSearch for other works by this author on:E van WalleE van Walle1SCK•CEN,Boeretang 200, B-2400 MOL()BelgiumSearch for other works by this author on:
-
Validation of Miniature Fracture Toughness Specimens for Material SurveillanceByM Valo,M Valo1Research scientists, and research professors,VTT Manufacturing Technology, P.O. Box 1704,FIN-02044VTT,.FinlandSearch for other works by this author on:T Planman,T Planman1Research scientists, and research professors,VTT Manufacturing Technology, P.O. Box 1704,FIN-02044VTT,.FinlandSearch for other works by this author on:K Wallin,K Wallin1Research scientists, and research professors,VTT Manufacturing Technology, P.O. Box 1704,FIN-02044VTT,.FinlandSearch for other works by this author on:R Rintamaa,R Rintamaa1Research scientists, and research professors,VTT Manufacturing Technology, P.O. Box 1704,FIN-02044VTT,.FinlandSearch for other works by this author on:R Ahlstrand,R Ahlstrand2Manager and assistant manager,FORTUM Engineering Ltd., P.O. Box 10,FIN-00048 FORTUM,.FinlandSearch for other works by this author on:J KohopääJ Kohopää2Manager and assistant manager,FORTUM Engineering Ltd., P.O. Box 10,FIN-00048 FORTUM,.FinlandSearch for other works by this author on:
-
Examination on Fracture Resistance of F82H Steel and Performance of Small Specimens in Transition and Ductile RegimesByK Wallin,K Wallin1Research professor, and research scientists,VTT Manufacturing Technology, P.O. Box 1704,FIN-02044VTT,.FinlandSearch for other works by this author on:A Laukkanen,A Laukkanen1Research professor, and research scientists,VTT Manufacturing Technology, P.O. Box 1704,FIN-02044VTT,.FinlandSearch for other works by this author on:S TähtinenS Tähtinen1Research professor, and research scientists,VTT Manufacturing Technology, P.O. Box 1704,FIN-02044VTT,.FinlandSearch for other works by this author on:
-
A Study of Specimen Size Effects on the Initiation Toughness and Tearing Resistance of an A533B-1 SteelByG WardleG Wardle1Consultant Technologist—Serco Assurance,Warrington, Cheshire, WA3 6AT,.UKSearch for other works by this author on:
-
Preferable Initial Crack Length for Fracture Toughness Evaluation Using sub-sized Bend SpecimensByH-J SchindlerH-J Schindler1Manager,Mat-Tec SA.,Winterthur,.SwitzerlandSearch for other works by this author on:
-
The Determination of Initiation Toughness of an A533B-1 Steel using Circumferentially-Cracked Bar (CCB) SpecimensByA Sherry,A Sherry1Consultant Engineer, Consultant Technologist, Principal Engineer and Senior Engineerrespectively.Serco Assurance,Birchwood Park, Warrington, Cheshire, WA3 6AT,.UKSearch for other works by this author on:G Wardle,G Wardle1Consultant Engineer, Consultant Technologist, Principal Engineer and Senior Engineerrespectively.Serco Assurance,Birchwood Park, Warrington, Cheshire, WA3 6AT,.UKSearch for other works by this author on:P Birkett,P Birkett1Consultant Engineer, Consultant Technologist, Principal Engineer and Senior Engineerrespectively.Serco Assurance,Birchwood Park, Warrington, Cheshire, WA3 6AT,.UKSearch for other works by this author on:M Wilkes,M Wilkes1Consultant Engineer, Consultant Technologist, Principal Engineer and Senior Engineerrespectively.Serco Assurance,Birchwood Park, Warrington, Cheshire, WA3 6AT,.UKSearch for other works by this author on:P BuddenP Budden2Section Head,British Energy Generation Ltd,Barnwood, Gloucester, GL4 3RS,.UKSearch for other works by this author on:
-
Evaluation of Standard Charpy Impact Properties with Subsized SpecimensByT Yamamoto,T Yamamoto1Assist, professor, the Oarai Branch,Inst. Material Research, Tohoku University,Oarai, Ibaraki, 311-1313, Dept. Chemical Engineering,JAPANEngineering SpecialistUniversity of California,Santa Barbara, CA 93106-5070.Search for other works by this author on:K Yabuki,K Yabuki2Graduate student and professor, respectively,Inst. Material Research, Tohoku University,Sendai, 980-8577.JapanSearch for other works by this author on:H Matsui,H Matsui2Graduate student and professor, respectively,Inst. Material Research, Tohoku University,Sendai, 980-8577.JapanSearch for other works by this author on:GR Odette,GR Odette3Professors, Dept. Mechanical and Environmental Engineering,University of California,Santa Barbara, CA 93106-5070.Search for other works by this author on:GE LucasGE Lucas3Professors, Dept. Mechanical and Environmental Engineering,University of California,Santa Barbara, CA 93106-5070.Search for other works by this author on:
-
Finite Element Simulations and Empirical Correlation for Charpy-V and Subsize Charpy Tests on an Unirradiated Low-Alloy RPV Ferritic SteelByCS Catherine,CS Catherine1CEA Saclay, DEN-DMN,F-91191 Gif-Sur-Yvette,.FranceSearch for other works by this author on:C Poussard,C Poussard1CEA Saclay, DEN-DMN,F-91191 Gif-Sur-Yvette,.FranceSearch for other works by this author on:J Vodinh,J Vodinh1CEA Saclay, DEN-DMN,F-91191 Gif-Sur-Yvette,.FranceSearch for other works by this author on:R Schill,R Schill1CEA Saclay, DEN-DMN,F-91191 Gif-Sur-Yvette,.FranceSearch for other works by this author on:N Hourdequin,N Hourdequin1CEA Saclay, DEN-DMN,F-91191 Gif-Sur-Yvette,.FranceSearch for other works by this author on:P Forget,P Forget1CEA Saclay, DEN-DMN,F-91191 Gif-Sur-Yvette,.FranceSearch for other works by this author on:P GalonP Galon2CEA Saclay, DEN-DM2S,F-91191 Gif-Sur-Yvette,FranceSearch for other works by this author on:
-
Correlation Between Subsize and Full-size Charpy Impact Properties of Neutron-Irradiated Reactor Pressure Vessel SteelsByK Dohi,K Dohi1Research scientist, research fellow and senior research fellow, respectively,Komae Research Laboratory, Central Research Institute of Electric Power Industry (CRIEPI),2-11-1, Iwado Kita, Komae-shi, Tokyo 201-8511,.JapanSearch for other works by this author on:N Soneda,N Soneda1Research scientist, research fellow and senior research fellow, respectively,Komae Research Laboratory, Central Research Institute of Electric Power Industry (CRIEPI),2-11-1, Iwado Kita, Komae-shi, Tokyo 201-8511,.JapanSearch for other works by this author on:T Onchi,T Onchi1Research scientist, research fellow and senior research fellow, respectively,Komae Research Laboratory, Central Research Institute of Electric Power Industry (CRIEPI),2-11-1, Iwado Kita, Komae-shi, Tokyo 201-8511,.JapanSearch for other works by this author on:H MatsuiH Matsui2Professor, the Oarai Branch,Institute for Materials Research, Tohoku University,Narita-cho, Oarai-machi, Ibaraki-ken 311-1313,.JapanSearch for other works by this author on:
-
Application of the Reconstituted Subsize Specimens for Assessment of Irradiation Embrittlement of RPV SteelsByYN Korolev,YN Korolev1Head of mechanical test Group, Deputy Director, Leading research scientists, Head of Lab., and Director, respectively,Russian Research Center “Kurchatov Institute”, Reactor Materials Division,Kurchatov Sq. 1, 123182 Moscow,.RussiaSearch for other works by this author on:YI Shtrombakh,YI Shtrombakh1Head of mechanical test Group, Deputy Director, Leading research scientists, Head of Lab., and Director, respectively,Russian Research Center “Kurchatov Institute”, Reactor Materials Division,Kurchatov Sq. 1, 123182 Moscow,.RussiaSearch for other works by this author on:YA Nikolaev,YA Nikolaev1Head of mechanical test Group, Deputy Director, Leading research scientists, Head of Lab., and Director, respectively,Russian Research Center “Kurchatov Institute”, Reactor Materials Division,Kurchatov Sq. 1, 123182 Moscow,.RussiaSearch for other works by this author on:PA PlatonovPA Platonov1Head of mechanical test Group, Deputy Director, Leading research scientists, Head of Lab., and Director, respectively,Russian Research Center “Kurchatov Institute”, Reactor Materials Division,Kurchatov Sq. 1, 123182 Moscow,.RussiaSearch for other works by this author on:
-
Evaluation of Fatigue Properties with Miniature Hourglass SpecimenByT Hirose,T Hirose1Graduate student,Graduate School of Energy Science, Kyoto University,Yoshida Honmachi, Sakyo, Kyoto 606-8501,.JapanSearch for other works by this author on:T Suzuki,T Suzuki1Graduate student,Graduate School of Energy Science, Kyoto University,Yoshida Honmachi, Sakyo, Kyoto 606-8501,.JapanSearch for other works by this author on:H Tanigawa,H Tanigawa2Post doctoral researcher,Japan Atomic Energy Research Institute,2-4 Shirakata, Tokai, Naka, Ibaraki 319-1195,.JapanSearch for other works by this author on:M Ando,M Ando2Post doctoral researcher,Japan Atomic Energy Research Institute,2-4 Shirakata, Tokai, Naka, Ibaraki 319-1195,.JapanSearch for other works by this author on:A Kohyama,A Kohyama3Professor and associate professor,Institute of Advanced Energy, Kyoto University,Gokasho, Uji, Kyoto 611-0011,.JapanSearch for other works by this author on:Y Katoh,Y Katoh3Professor and associate professor,Institute of Advanced Energy, Kyoto University,Gokasho, Uji, Kyoto 611-0011,.JapanSearch for other works by this author on:M NaruiM Narui4Research assistant,Institute for Materials Research, Tohoku University,Naritamachi Oarai, Higashi-Ibaraki, Ibaraki 311-1313,.JapanSearch for other works by this author on:
-
Mechanical Property Testing of Irradiated Zircaloy Cladding Under Reactor Transient ConditionsByRS Daum,RS Daum1Engineer, Energy Technology Division,Argonne National Laboratory,Argonne, IL 60439Search for other works by this author on:S Majumda,S Majumda2Senior Engineer, Energy Technology Division,Argonne National Laboratory,Argonne, IL 60439Search for other works by this author on:H Tsai,H Tsai1Engineer, Energy Technology Division,Argonne National Laboratory,Argonne, IL 60439Search for other works by this author on:TS Bray,TS Bray1Engineer, Energy Technology Division,Argonne National Laboratory,Argonne, IL 60439Search for other works by this author on:DA Koss,DA Koss3Professor, Department of Materials Science and Engineering,The Pennsylvania State University,University Park, PA 16802Search for other works by this author on:AT Motta,AT Motta4Associate Professor, Department of Mechanical and Nuclear Engineering,The Pennsylvania State University,University Park, PA 16802Search for other works by this author on:MC BilloneMC Billone5Program Manager and Engineer, Energy Technology Division,Argonne National Laboratory,Argonne, IL 60439Search for other works by this author on:
-
In-Beam Fatigue Response of a Low Activation Ferritic Steel at 60°CByY Murase,Y Murase1Researcher of 2nd subgroup, 2nd subgroup leader and 3rd subgroup leader, respectively, 2nd group,National Research Institute for Metals,1-2-1 Sengen, Tsukuba, Ibaraki 305-0047,.JapanSearch for other works by this author on:J Nagakawa,J Nagakawa1Researcher of 2nd subgroup, 2nd subgroup leader and 3rd subgroup leader, respectively, 2nd group,National Research Institute for Metals,1-2-1 Sengen, Tsukuba, Ibaraki 305-0047,.Japan2Professor,Interdisciplinary Graduate School of Engineering Sciences, Kyushu University,6-1 Kasuga Koen, Kasuga, Fukuoka 816-8580,.JapanSearch for other works by this author on:N YamamotoN Yamamoto1Researcher of 2nd subgroup, 2nd subgroup leader and 3rd subgroup leader, respectively, 2nd group,National Research Institute for Metals,1-2-1 Sengen, Tsukuba, Ibaraki 305-0047,.JapanSearch for other works by this author on:
-
On the Relation Between Engineering Load-Displacement Curves and True Stress Strain Behavior in Tests of Flat Tensile SpecimensByGR Odette,GR Odette1The authors are associated with the Departments of Mechanical and Environmental Engineering and Materials at theUniversity of California,Santa Barbara, CASearch for other works by this author on:MY He,MY He1The authors are associated with the Departments of Mechanical and Environmental Engineering and Materials at theUniversity of California,Santa Barbara, CASearch for other works by this author on:EG Donahue,EG Donahue1The authors are associated with the Departments of Mechanical and Environmental Engineering and Materials at theUniversity of California,Santa Barbara, CASearch for other works by this author on:GE LucasGE Lucas1The authors are associated with the Departments of Mechanical and Environmental Engineering and Materials at theUniversity of California,Santa Barbara, CASearch for other works by this author on:
-
Component-Based Test Specimen DesignBySA Wimmer,SA Wimmer1Senior Staff Scientist,Nova Research, Inc.,1900 Elkin Street, Suite 230, Alexandria, VA 22308.Search for other works by this author on:VG DeGiorgiVG DeGiorgi2Section Head,Multifunctional Materials Branch, Naval Research Laboratory,4555 Overlook Avenue SW, Washington, DC 20375.Search for other works by this author on:
-
A Method to Study Deformation Mechanisms in Ion-irradiated Steels Using a Disk Bend Test TechniqueByTS Byun,TS Byun1Research Assistant Professor of the University of Tennessee, Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151Search for other works by this author on:EH Lee,EH Lee2Research Staff Member, respectively, Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151Search for other works by this author on:JD Hunn,JD Hunn2Research Staff Member, respectively, Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151Search for other works by this author on:K Farrell,K Farrell2Research Staff Member, respectively, Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151Search for other works by this author on:LK MansurLK Mansur2Research Staff Member, respectively, Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151Search for other works by this author on:
-
Small Specimen Procedures for Determination of Deformation MapsByK Farrell,K Farrell1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:TS Byun,TS Byun1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:JW Jones,JW Jones1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:LT Gibson,LT Gibson1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:RG Sitterson,RG Sitterson1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:N Hashimoto,N Hashimoto1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:JL Bailey,JL Bailey1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:MJ GardnerMJ Gardner1Metals and Ceramics Division,Oak Ridge National Laboratory, P.O. Box 2008,Oak Ridge, TN 37831-6151.Search for other works by this author on:
-
Specimen Size Effects on Tensile Properties of 2D/3D SiC/SiC CompositesByT Nozawa,T Nozawa1Graduate student,Graduate School of Energy Science, Kyoto University,Gokasho, Uji, Kyoto, 611-0011.JapanSearch for other works by this author on:T Hinoki,T Hinoki1Graduate student,Graduate School of Energy Science, Kyoto University,Gokasho, Uji, Kyoto, 611-0011.JapanSearch for other works by this author on:Y Katoh,Y Katoh2Professor,Institute of Advanced Energy, Kyoto University,Gokasho, Uji, Kyoto, 611-0011.Japan3Reserch scientist,CREST-ACE, Japan Science and Technology Corporation,Kawaguchi, Saitama, 332-0012.JapanSearch for other works by this author on:A Kohyama,A Kohyama2Professor,Institute of Advanced Energy, Kyoto University,Gokasho, Uji, Kyoto, 611-0011.Japan3Reserch scientist,CREST-ACE, Japan Science and Technology Corporation,Kawaguchi, Saitama, 332-0012.JapanSearch for other works by this author on:E Lara-CurzioE Lara-Curzio4Group Leader/Senior Research Staff Member,Oak Ridge National Laboratory,Oak Ridge, TN 37830.Search for other works by this author on:
-
A Finite Element Study Relating Load-Penetration Curves and Indentation Topography to Yield and Post-Yield Constitutive BehaviorByMY He,MY He1Department of Mechanical and Environmental Engineering,University of California,Santa Barbara, CA.Search for other works by this author on:GR Odette,GR Odette1Department of Mechanical and Environmental Engineering,University of California,Santa Barbara, CA.Search for other works by this author on:GE Lucas,GE Lucas1Department of Mechanical and Environmental Engineering,University of California,Santa Barbara, CA.Search for other works by this author on:B SchroeterB Schroeter2Georgia Institute of Technology.Search for other works by this author on:
-
Subsize Specimens for Fatigue Crack Growth Rate Testing of Metallic MaterialsByM Li,M Li1Ph.D Graduate Student, Department of Nuclear, Plasma and Radiological Engineering,University of Illinois at Urbana-Champaign, 214 Nuclear Engineering Laboratory,103 South Goodwin Avenue, Urbana, IL 61801Search for other works by this author on:JF StubbinsJF Stubbins2Professor and Head, Department of Nuclear, Plasma and Radiological Engineering,University of Illinois at Urbana-Champaign, 214 Nuclear Engineering Laboratory,103 South Goodwin Avenue, Urbana, IL 61801Search for other works by this author on:
-
The Effect of Test Machine Compliance on the Measured Shear Punch Yield Stress as Predicted Using Finite Element AnalysisByMB Toloczko,MB Toloczko1Research Associate and Professor, respectively, Department of Quantum Science and Energy Engineering,Tohoku University,980-8579,.JapanSearch for other works by this author on:K Abe,K Abe1Research Associate and Professor, respectively, Department of Quantum Science and Energy Engineering,Tohoku University,980-8579,.JapanSearch for other works by this author on:ML Hamilton,ML Hamilton2Staff Scientist,Pacific Northwest National Laboratory,Richland, WA, 99352,.USASearch for other works by this author on:FA Garner,FA Garner2Staff Scientist,Pacific Northwest National Laboratory,Richland, WA, 99352,.USASearch for other works by this author on:RJ KurtzRJ Kurtz2Staff Scientist,Pacific Northwest National Laboratory,Richland, WA, 99352,.USASearch for other works by this author on:
-
Small Punch Test : EPRI-CEA Finite Element Simulation Benchmark and Inverse Method for the Estimation of Elastic Plastic BehaviorByCS Catherine,CS Catherine1CEA Saclay, DEN-DMN,F-91191 GIF-SUR-YVETTE,.FRANCESearch for other works by this author on:J Messier,J Messier1CEA Saclay, DEN-DMN,F-91191 GIF-SUR-YVETTE,.FRANCESearch for other works by this author on:C Poussard,C Poussard1CEA Saclay, DEN-DMN,F-91191 GIF-SUR-YVETTE,.FRANCESearch for other works by this author on:S Rosinski,S Rosinski2EPRI,1300 Harris Blvd., Charlotte, NC 28262,.USASearch for other works by this author on:J FouldsJ Foulds3Exponent Failure Analysis Associates,Menlo Park, CA 94025,.USASearch for other works by this author on:
-
The Effect of Specimen Thickness and Grainsize on Mechanical Properties Obtained from the Shear Punch TestByMB Toloczko,MB Toloczko1Research Associate, Graduate Student, and Professor, respectively, Department of Quantum Science and Energy Engineering,Tohoku University,980-8579,.JapanSearch for other works by this author on:Y Yokokura,Y Yokokura1Research Associate, Graduate Student, and Professor, respectively, Department of Quantum Science and Energy Engineering,Tohoku University,980-8579,.JapanSearch for other works by this author on:K Abe,K Abe1Research Associate, Graduate Student, and Professor, respectively, Department of Quantum Science and Energy Engineering,Tohoku University,980-8579,.JapanSearch for other works by this author on:ML Hamilton,ML Hamilton2Staff Scientist,Pacific Northwest National Laboratory,Richland, WA, 99352,.USASearch for other works by this author on:FA Garner,FA Garner2Staff Scientist,Pacific Northwest National Laboratory,Richland, WA, 99352,.USASearch for other works by this author on:RJ KurtzRJ Kurtz2Staff Scientist,Pacific Northwest National Laboratory,Richland, WA, 99352,.USASearch for other works by this author on:
-
Determination of Mechanical Property Gradients in Heat-Affected Zones of Ferritic Steel Weldments by Shear-Punch TestsByV Karthik,V Karthik1Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research,Kalpakkam—603102,.IndiaSearch for other works by this author on:K Laha,K Laha1Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research,Kalpakkam—603102,.IndiaSearch for other works by this author on:KV Kasiviswanathan,KV Kasiviswanathan1Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research,Kalpakkam—603102,.IndiaSearch for other works by this author on:B RajB Raj1Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research,Kalpakkam—603102,.IndiaSearch for other works by this author on:
-
RESQUE: Reconstitution Techniques Qualification & Evaluation to Study Ageing Phenomena of Nuclear Pressure Vessel MaterialsByE van Walle,E van Walle1Head of Department, Section Head Mechanical Testing Group, Reactor Materials Research Unit,SCK-CEN,Boeretang 200, B-2400 Mol,.BelgiumSearch for other works by this author on:M Scibetta,M Scibetta1Head of Department, Section Head Mechanical Testing Group, Reactor Materials Research Unit,SCK-CEN,Boeretang 200, B-2400 Mol,.BelgiumSearch for other works by this author on:MJ Valo,MJ Valo2Group Leader,VTT Manufacturing Technology, P.O. Box 17042,FIN-02044VTT,.FinlandSearch for other works by this author on:H-W Viehrig,H-W Viehrig3Senior Scientist, Research Scientist,Forschungszentrum Rossendorf e.V., P.O. Box 510119,D-01314 Dresden,.GermanySearch for other works by this author on:H Richter,H Richter3Senior Scientist, Research Scientist,Forschungszentrum Rossendorf e.V., P.O. Box 510119,D-01314 Dresden,.GermanySearch for other works by this author on:T Atkins,T Atkins4Project Leader,AEA Technology, Nuclear Research,GB-0XXII Ora,UKSearch for other works by this author on:MR Wootton,MR Wootton5Research Officer,RSO BNFL Magnox Generation, Berkeley Centre,Berkeley, Gloucestershire, GL13 9PB,.UKSearch for other works by this author on:E Keim,E Keim6Manager,Siemens Nuclear Power GmbH (SNP), Postfach 3220,D-91050 Erlangen,.GermanySearch for other works by this author on:L Debarberis,L Debarberis7Project Manager,Joint Research Center — IAM Petten, P.O. Box 2,Westerduinweg 3, 1755ZG Petten,.The NetherlandsSearch for other works by this author on:M HorstenM Horsten8Product Group Manager Materials,Monitoring and Inspection, NRG,Westerduinweg 3, P.O. Box 1,1755ZG Petten,.The NetherlandsSearch for other works by this author on:
-
RESQUE: Determination of the Lowest Acceptable Insert Length for Reconstituted Cv-impact and Precracked Cv SpecimenByMJ Valo,MJ Valo3VTT Manufacturing Technology,Espoo,.FinlandSearch for other works by this author on:H-W Viehrig,H-W Viehrig4Research Center Rossendorf Inc.,Dresden,.GermanySearch for other works by this author on:H Richter,H Richter4Research Center Rossendorf Inc.,Dresden,.GermanySearch for other works by this author on:MR Wootton,MR Wootton6BNFL Magnox Generation,Berkeley,.UKSearch for other works by this author on:L Debarberis,L Debarberis7JRC/IAM,Petten,.The NetherlandsSearch for other works by this author on:M HorstenM Horsten8NRG,Petten,.The NetherlandsSearch for other works by this author on:
-
RESQUE: Validation of Specimen Reconstitution with Temperature Measurements and Comparative Testing with Irradiated MaterialsByM Valo,M Valo1Group Leader,VTT Manufacturing Technology, P.O.Box 17042,FIN-02044VTT,.FinlandSearch for other works by this author on:E Keim,E Keim2Manager,Siemens Nuclear Power GmbH (SNP), Postfach 3220,D-91050 Erlangen,.GermanySearch for other works by this author on:E van Walle,E van Walle3Head of Department,Reactor Materials Reseach Unit, SCK CEN,Boeretang 200, B-2400 Mol,.BelgiumSearch for other works by this author on:M Scibetta,M Scibetta4Section Head Mechanical Testing Group,Reactor Materials Reseach Unit, SCK CEN,Boeretang 200, B-2400 Mol,.BelgiumSearch for other works by this author on:T Atkins,T Atkins5Project Leader,AEA Technology, Nuclear Research,GB-0XXII Ora,.UKSearch for other works by this author on:M Wootton,M Wootton6Research Officer,RSO BNFL Magnox Generation, Berkeley Centre,Berkeley, Gloucestershire, GL13 9PB,.UKSearch for other works by this author on:H Viehrig,H Viehrig7Senior Scientist,Forschungszentrum Rossendorf e.V., P.O.Box 510119,D-01314 Dresden,.GermanySearch for other works by this author on:H Richter,H Richter8Research Scientist,Forschungszentrum Rossendorf e.V., P.O.Box 510119,D-01314 Dresden,.GermanySearch for other works by this author on:L Debarberis,L Debarberis9Project Manager,Joint Research Centre-IAM Petten, P.O.Box 2Westerduinweg, 1755ZG Petten,.The NetherlandsSearch for other works by this author on:M HorstenM Horsten10Product Group Manager Materials,Monitoring and Inspection, NRG, P.O.Box 25,1755 ZG Petten,.The NetherlandsSearch for other works by this author on:
-
Selection of the Optimum Irradiation Fluence to Assess Annealing during Reconstitution of Charpy Impact SpecimensByE Otsuka,E Otsuka1Director, PLIM Project,JAPEIC, Tokyo Engineering Center,Urayasu-shi, Chiba, 279-0011JapanSearch for other works by this author on:S Hatano,S Hatano2Manager, PLIM Project,JAPEIC, Tokyo Engineering Center,Urayasu-shi, Chiba, 79-0011,JapanSearch for other works by this author on:Y AtagoY Atago2Manager, PLIM Project,JAPEIC, Tokyo Engineering Center,Urayasu-shi, Chiba, 79-0011,JapanSearch for other works by this author on:
-
Reconstitution of Charpy-V Specimens with CO2 Laser WeldingByPI Petrov,PI Petrov1Visiting ScientistatSCK•CEN from Institute of Electronics,72 Tzarigradko chausse, 1784 Sofia,.BulgariaSearch for other works by this author on:M Scibetta,M Scibetta2Lead scientist, Senior engineer, Lead scientist and Head of RMR DepartmentatSCK•CEN,Boeretang 200, B-2400 Mol,.BelgiumSearch for other works by this author on:J-L Puzzolante,J-L Puzzolante2Lead scientist, Senior engineer, Lead scientist and Head of RMR DepartmentatSCK•CEN,Boeretang 200, B-2400 Mol,.BelgiumSearch for other works by this author on:E van WalleE van Walle2Lead scientist, Senior engineer, Lead scientist and Head of RMR DepartmentatSCK•CEN,Boeretang 200, B-2400 Mol,.BelgiumSearch for other works by this author on:
-
RESQUE: Dependence of Test Results on Reconstituted Specimens with Tolerance Deviations and Variation of End Block MaterialsByH-W Viehrig,H-W Viehrig1Senior Scientist,Forschungszentrum Rossendorf e.V., P.O. Box 510119,D-01314 Dresden,.GermanySearch for other works by this author on:H Richter,H Richter2Research Scientist,Forschungszentrum Rossendorf e.V., P.O. Box 510119,D-01314 Dresden,.GermanySearch for other works by this author on:T Atkins,T Atkins3Project Leader,AEA Technology, Nuclear Research,GB-OXXII Ora,.UKSearch for other works by this author on:E van Walle,E van Walle4Head of Department,Reactor Materials Research Unit, SCK•CEN,Boeretang 200, B-2400 Mol.BelgiumSearch for other works by this author on:M Scibetta,M Scibetta5Section Head Mechanical Testing Group,Reactor Materials Research Unit, SCK•CEN,Boeretang 200, B-2400 Mol.BelgiumSearch for other works by this author on:MJ Valo,MJ Valo6Group Leader,VTT Manufacturing Technology, P.O.Box 17042,FIN-02044VTT,.FinlandSearch for other works by this author on:MR Wootton,MR Wootton7Research Officer,RSO BNFL Magnox Generation, Berkeley Centre,Berkeley, Gloucestershire, GL13 9PB,.UKSearch for other works by this author on:E Keim,E Keim8Manager,Siemens Nuclear Power GmbH (SNP), Postfach 3220,D 91050 Erlangen,.GermanySearch for other works by this author on:L Debaberis,L Debaberis9Project Manager,Joint Research Center - IAM Petten, P.O.Box 2Westerduinweg, 1755ZG Petten,.The NetherlandsSearch for other works by this author on:M HorstenM Horsten10Product Group Manager Materials, Monitoring and Inspection,NRG, P.O. Box 25,1755 ZG Petten,.The NetherlandsSearch for other works by this author on:
Email alerts
Copyright
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of the publisher.
© 2002
ASTM International
