Skip Nav Destination
100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2000.
ASTM Select Technical Papers
Multiaxial Fatigue and Deformation: Testing and Prediction
By
S Kalluri,
S Kalluri
1
Ohio Aerospace Institute NASA Glenn Research Center
at Lewis Field Cleveland, Ohio Symposium Co-Chairman and Editor
Search for other works by this author on:
PJ Bonacuse
PJ Bonacuse
2
Vehicle Technology Directorate US. Army Research Laboratory NASA Glenn Research Center
at Lewis Field Cleveland, Ohio Symposium Co-Chairman and Editor
Search for other works by this author on:
ISBN-10:
0-8031-2865-7
ISBN:
978-0-8031-2865-1
No. of Pages:
452
Publisher:
ASTM International
Publication date:
2000
Description
This comprehensive new ASTM publication examines state-of-the-art multiaxial testing techniques and methods for characterizing the fatigue and deformation behaviors of engineering materials. 25 analytical, peer-reviewed papers, written by experts from academia, industry, and government, are divided into the following sections:
Multiaxial Strength of Materials--addresses multiaxial strength, stress, and failure modes of materials.
Multiaxial Deformation of Materials--investigates constitutive relationships and deformation behavior of materials under multiaxial loading conditions.
Fatigue Life Prediction under Generic Multiaxial Loads--examines the challenging task of estimating fatigue life under general multiaxial loads.
Fatigue Life Prediction under Specific Multiaxial Loads--describes biaxial and multiaxial fatigue and life estimation under combinations of cyclic loading conditions, such as axial tension/compression, bending, and torsion.
Multiaxial Fatigue Life and Crack Growth Estimation--covers crack growth monitoring under cyclic mulitaxial loading conditions and determination of fatigue life.
Multiaxial Experimental Techniques--explores state-of-the-art experimental methods to generate mulitaxial deformation and fatigue data to develop and verify both constitutive models used to describe the flow behavior of materials and fatigue life estimation models.
Kalluri, S, & Bonacuse, P.
Multiaxial Fatigue and Deformation: Testing and Prediction. ISBN-10: 0-8031-2865-7
ISBN: 978-0-8031-2865-1
No. of Pages: 452
ISBN (electronic): 978-0-8031-5435-3
Publisher: ASTM International
Published: 2000
Download citation file:
Table of Contents
-
Strength of a G-10 Composite Laminate Tube Under Multiaxial Loading
-
Biaxial Strength Testing of Isotropic and Anisotropic MonolithsByJA Salem,JA Salem1NASA Glenn Research Center,MS 49-7, 21000 Brookpark Rd., Cleveland, OH 44135.Search for other works by this author on:MG JenkinsMG Jenkins2University of Washington, Box 352600,Seattle, WA 98195.Search for other works by this author on:
-
In-Plane Biaxial Failure Surface of Cold-Rolled 304 Stainless Steel SheetsBySJ Covey,SJ Covey1St. Cloud State University,St. Cloud, MN.Search for other works by this author on:PA BartolottaPA Bartolotta2NASA Glenn Research Center,Cleveland, OH.Search for other works by this author on:
-
Analysis of Characterization Methods for Inelastic Composite Material Deformation Under Multiaxial StressesByJ Ahmad,J Ahmad1Research Applications, Inc.,11772 Sorrento Valley Road, Suite 145,San Diego, CA 92121-1085.Search for other works by this author on:GM Newaz,GM Newaz2Wayne State University, Mechanical Engineering Department,5050 Anthony Wayne Drive, Detroit, MI 48202.Search for other works by this author on:T NicholasT Nicholas3Air Force Research Laboratory, Materials and Manufacturing Directorate,Wright-Patterson AFB, OH 45433-7817.Search for other works by this author on:
-
Deformation and Fracture of a Particulate MMC Under Nonradial Combined LoadingsByDWA Rees,DWA Rees1Senior lecturer and lecturer, respectively, Department of Systems Engineering,Brunel University,Uxbridge, Middlesex, UB8 3 PH,.UKSearch for other works by this author on:YHJ AuYHJ Au1Senior lecturer and lecturer, respectively, Department of Systems Engineering,Brunel University,Uxbridge, Middlesex, UB8 3 PH,.UKSearch for other works by this author on:
-
Multiaxial Stress-Strain Notch AnalysisByA Buczynski,A Buczynski1Institute of Heavy Machinery Engineering, Warsaw University of Technology,ul. Narbutta 85, 02-524 Warsaw,.PolandSearch for other works by this author on:G GlinkaG Glinka2Department of Mechanical Engineering,University of Waterloo,Ontario N2L 3G1,.CanadaSearch for other works by this author on:
-
Axial-Torsional Load Effects of Haynes 188 at 650°CByCJ Lissenden,CJ Lissenden1Assistant professor, Department of Engineering Science and Mechanics,Penn State University,University Park, PA.Search for other works by this author on:MA Walker,MA Walker2Undergraduate student, Department of Engineering Science and Mechanics,Penn State University,University Park, PA 16802.Search for other works by this author on:BA LerchBA Lerch3Research engineer, Life Prediction Branch,NASA Glenn Research Center,Cleveland OH, 44135.Search for other works by this author on:
-
A Newton Algorithm for Solving Non-Linear Problems in Mechanics of Structures Under Complex Loading HistoriesByM Arzt,M Arzt1GKSS Forschungszentrum Geesthacht GmbH, Institut für Werkstofforschung,Max-Planck-Straβe, 21502 Geesthacth,.GermanySearch for other works by this author on:W Brocks,W Brocks1GKSS Forschungszentrum Geesthacht GmbH, Institut für Werkstofforschung,Max-Planck-Straβe, 21502 Geesthacth,.GermanySearch for other works by this author on:T MohrT Mohr1GKSS Forschungszentrum Geesthacht GmbH, Institut für Werkstofforschung,Max-Planck-Straβe, 21502 Geesthacth,.GermanySearch for other works by this author on:
-
A Numerical Approach for High-Cycle Fatigue Life Prediction with Multiaxial LoadingByM de Freitas,M de Freitas1Professor, research assistant, and associate professor, respectively. Department of Mechanical Engineering,Instituto Superior Técnico, Technical University of Lisbon,Av. Rovisco Pais 1, 1049-001 Lisbon,.PortugalSearch for other works by this author on:B Li,B Li1Professor, research assistant, and associate professor, respectively. Department of Mechanical Engineering,Instituto Superior Técnico, Technical University of Lisbon,Av. Rovisco Pais 1, 1049-001 Lisbon,.PortugalSearch for other works by this author on:JLT SantosJLT Santos1Professor, research assistant, and associate professor, respectively. Department of Mechanical Engineering,Instituto Superior Técnico, Technical University of Lisbon,Av. Rovisco Pais 1, 1049-001 Lisbon,.PortugalSearch for other works by this author on:
-
Experiences with Lifetime Prediction Under Multiaxial Random LoadingByK Pötter,K Pötter1Institute for Plant Engineering and Fatigue Analysis (IMAB), Technical University of Clausthal,Leibnizstraße 32, 38678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:F Yousefi,F Yousefi1Institute for Plant Engineering and Fatigue Analysis (IMAB), Technical University of Clausthal,Leibnizstraße 32, 38678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:H ZennerH Zenner1Institute for Plant Engineering and Fatigue Analysis (IMAB), Technical University of Clausthal,Leibnizstraße 32, 38678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:
-
Generalization of Energy-Based Multiaxial Fatigue Criteria to Random LoadingByT Łagoda,T Łagoda1Assistant professor and professor, respectively, Department of Mechanics and Machine Design,Technical University of Opole,ul.Mikolajczyka 5, 45–271 Opole,.PolandSearch for other works by this author on:E MachaE Macha1Assistant professor and professor, respectively, Department of Mechanics and Machine Design,Technical University of Opole,ul.Mikolajczyka 5, 45–271 Opole,.PolandSearch for other works by this author on:
-
Fatigue Strength of Welded Joints Under Multiaxial Loading: Comparison Between Experiments and CalculationsByM Witt,M Witt1Technical University of Clausthal, Institute for Plant Engineering and Fatigue Analysis,Leibnizstr, 32, D368678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:F Yousefi,F Yousefi1Technical University of Clausthal, Institute for Plant Engineering and Fatigue Analysis,Leibnizstr, 32, D368678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:H ZennerH Zenner1Technical University of Clausthal, Institute for Plant Engineering and Fatigue Analysis,Leibnizstr, 32, D368678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:
-
The Effect of Periodic Overloads on Biaxial Fatigue of Normalized SAE 1045 SteelByJJF Bonnen,JJF Bonnen1Research staff, Manufacturing Systems Dept.,Ford Motor Co.,3135 MD3135 SRL, P. O. Box 2053,Dearborn MI 48121-2053.Search for other works by this author on:TH TopperTH Topper2Professor, Civil Engineering Department,University of Waterloo,Ontario,.Canada, N2L3G1Search for other works by this author on:
-
Fatigue of the Quenched and Tempered Steel 42CrMo4 (SAE 4140) under Combined In- and Out-of-Phase Tension and TorsionByG Löwisch,G Löwisch1Research engineer, senior research engineer, and managing director, respectively,Stiftung Institut fuer Werkstofflechnik,Badgasteiner Straβe 3, D-29359 Bremen,.GermanySearch for other works by this author on:H Bomas,H Bomas1Research engineer, senior research engineer, and managing director, respectively,Stiftung Institut fuer Werkstofflechnik,Badgasteiner Straβe 3, D-29359 Bremen,.GermanySearch for other works by this author on:P MayrP Mayr1Research engineer, senior research engineer, and managing director, respectively,Stiftung Institut fuer Werkstofflechnik,Badgasteiner Straβe 3, D-29359 Bremen,.GermanySearch for other works by this author on:
-
In-Phase and Out-of-Phase Combined Bending-Torsion Fatigue of a Notched SpecimenByJ Park,J Park1Senior researcher,Hyundai Heavy Industries Co., Ltd.,1 Cheonha-Dong, Dong-Gu, Ulsan,.Korea682-792Search for other works by this author on:DV NelsonDV Nelson2Professor, Mechanical Engineering Department,Stanford University,Stanford, CA 94305-4021.Search for other works by this author on:
-
The Application of a Biaxial Isothermal Fatigue Model to Thermomechanical Loading for Austenitic Stainless SteelBySY Zamrik,SY Zamrik1Professor emeritus, Department of Engineering Science and Mechanics,Pennsylvania State University,University Park, PA 16802.Search for other works by this author on:ML RenauldML Renauld2Research engineer,United Technology Research Center, (Pratt & Whitney), Materials Structures Technology Department,East Hartford, CT 06108.Search for other works by this author on:
-
Cumulative Axial and Torsional Fatigue: An Investigation of Load-Type Sequencing EffectsByS Kalluri,S Kalluri1Senior research engineer,Ohio Aerospace Institute, NASA Glenn Research Center,Cleveland, OH.Search for other works by this author on:PJ BonacusePJ Bonacuse2Materials research engineer, Vehicle Technology Directorate,U.S. Army Research Laboratory, NASA Glenn Research Center,Cleveland, OH.Search for other works by this author on:
-
A New Multiaxial Fatigue Life and Crack Growth Rate Model for Various In-Phase and Out-of-Phase Strain PathsByA Varvani-Farahani,A Varvani-Farahani1Assistant professor,Department of Mechanical Engineering-Ryerson Polytechnic University,Toronto, Ontario, M5B 2K3,.CanadaSearch for other works by this author on:TH TopperTH Topper2Full professor, Civil Engineering Department,University of Waterloo,Waterloo, Ontario, N2L 3G1,.CanadaSearch for other works by this author on:
-
Modeling of Short Crack Growth Under Biaxial Fatigue: Comparison Between Simulation and ExperimentByHA Suhartono,HA Suhartono1Institut für Maschinelle Anlagentechnik und Betriebsfestigkeit, TU Clausthal,Leibnizstr. 32, 38678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:K Pötter,K Pötter1Institut für Maschinelle Anlagentechnik und Betriebsfestigkeit, TU Clausthal,Leibnizstr. 32, 38678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:A Schram,A Schram2Institut für Schweisstechnik und Trennende Fertigungsverfahren, TU Clausthal,Agricolastr. 2, 38678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:H ZennerH Zenner1Institut für Maschinelle Anlagentechnik und Betriebsfestigkeit, TU Clausthal,Leibnizstr. 32, 38678 Clausthal-Zellerfeld,.GermanySearch for other works by this author on:
-
Micro-Crack Growth Modes and Their Propagation Rate under Multiaxial Low-Cycle Fatigue at High TemperatureByN Isobe,N Isobe1Researcher,Hitachi, Ltd., Mechanical Engineering Research Laboratory,3-1-1, Saiwai, Hitachi Ibaraki, 317-8511.JapanSearch for other works by this author on:S SakuraiS Sakurai2Senior researcher,Hitachi, Ltd., Mechanical Engineering Research Laboratory,3-1-1, Saiwai, Hitachi Ibaraki, 317-8511.JapanSearch for other works by this author on:
-
System Design for Multiaxial High-Strain Fatigue TestingByRD LohrRD Lohr1Corporate research director,Instron Corporation,High Wycombe, HP12 3SY,.UKSearch for other works by this author on:
-
An In-Plane Biaxial Contact ExtensometerByDL Krause,DL Krause1Materials research engineer,NASA Glenn Research Center, Mail Stop 51-1,21000 Brookpark Road, Cleveland, OH 44135-3191.Search for other works by this author on:PA BartolottaPA Bartolotta1Materials research engineer,NASA Glenn Research Center, Mail Stop 51-1,21000 Brookpark Road, Cleveland, OH 44135-3191.Search for other works by this author on:
-
Design of Specimens and Reusable Fixturing for Testing Advanced Aeropropulsion Materials Under In-Plane Biaxial LoadingByJR Ellis,JR Ellis1Senior research engineer,NASA Glenn Research Center,Cleveland, OH 44135.Search for other works by this author on:GS Sandlass,GS Sandlass2Structural analyst,MTS Systems Corp.,Eden Prairie, MN 55344.Search for other works by this author on:M BayyariM Bayyari3Principal research engineer,Research Applications, Inc.,San Diego, CA 92121.Search for other works by this author on:
-
Cruciform Specimens for In-Plane Biaxial Fracture, Deformation, and Fatigue TestingByC Dalle Donne,C Dalle Donne1Research engineer and senior engineer, respectively,Institute of Materials Research, German Aerospace Center DLR,Linder Höhe, D-51147 Cologne,.GermanySearch for other works by this author on:K-H Trautmann,K-H Trautmann1Research engineer and senior engineer, respectively,Institute of Materials Research, German Aerospace Center DLR,Linder Höhe, D-51147 Cologne,.GermanySearch for other works by this author on:H AmstutzH Amstutz2Senior research engineer, Department of Mechanics of Materials,University of Darmstadt,Petersenstr, 13, D-64287 Darmstadt,.GermanySearch for other works by this author on:
-
Development of a True Triaxial Testing Facility for Composite MaterialsByJS Welsh,JS Welsh1Assistant professor, Mechanical Engineering Department,South Dakota State University,Brookings, SD 57007.Search for other works by this author on:DF AdamsDF Adams2Director, Composite Materials Research Group and professor, Department of Mechanical Engineering,University of Wyoming,Laramie, WY 82071-3295.Search for other works by this author on:
Email alerts
Copyright
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of the publisher.
© 2000
ASTM International
