Skip Nav Destination
ASTM Selected Technical Papers
Effects of Radiation on Materials: 19th International Symposium
ISBN-10:
0-8031-2852-5
ISBN:
978-0-8031-2852-1
No. of Pages:
1286
Publisher:
ASTM International
Publication date:
2000
eBook Chapter
Effect of Radiation on Material Used for 600MW Chinese Nuclear Power Plant Reactor Pressure Vessel
By
X Jia
,
X Jia
1
Senior Engineer, Professor, Professor, Assistant Engineer
, respectively, Institute of Atomic Energy
, P.O. Box 275(51), Beijing, 102413,
.China
Search for other works by this author on:
Y Xu
,
Y Xu
1
Senior Engineer, Professor, Professor, Assistant Engineer
, respectively, Institute of Atomic Energy
, P.O. Box 275(51), Beijing, 102413,
.China
Search for other works by this author on:
W Yang
,
W Yang
1
Senior Engineer, Professor, Professor, Assistant Engineer
, respectively, Institute of Atomic Energy
, P.O. Box 275(51), Beijing, 102413,
.China
Search for other works by this author on:
C Zhang
C Zhang
1
Senior Engineer, Professor, Professor, Assistant Engineer
, respectively, Institute of Atomic Energy
, P.O. Box 275(51), Beijing, 102413,
.China
Search for other works by this author on:
Page Count:
7
-
Published:2000
Citation
Jia, X, Xu, Y, Yang, W, & Zhang, C. "Effect of Radiation on Material Used for 600MW Chinese Nuclear Power Plant Reactor Pressure Vessel." Effects of Radiation on Materials: 19th International Symposium. Ed. Hamilton, M, Kumar, A, Rosinski, S, & Grossbeck, M. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2000.
Download citation file:
Irradiation experiments were conducted to determine the effect of radiation on the properties of 16MnD5 material from a simulate Chinese 600 MW nuclear power plant reactor pressure vessel ring forging. Irradiation experiments were conducted to compare the performance of the 16MnD5 samples to samples of American Society for Testing and Materials Specification A508-class 3 material. The results showed that the radiation effects on the 16MnD5 material were less than those exhibited by the A505-class 3 material.
References
1.
Xu
,Y.
, Jia
, X.
, Experimental Research on Radiation Embrittlement of Low-copper Nuclear Power Plant Reactor Pressure Vessel Steels
. Chinese Journal of Nuclear Science and Engineering
, Vol. 18
, No.2
. 1998
.2.
U. S. NRC. 1.99. Rev.2.
1998
3.
odetle
G.R.
and lucas
G.R.
., Irradiation Embrittlement of Reactor Pressure Vessel Steels
. ASTM STP909 (1986
) P206.4.
Benfu
Hu.
, Yang
Wendou.
, Research on the Microstructure of Reactor Pressure Vessel Steels Irradiated by Electron Beams
. CIAE
, Work Reports, 1992
.
This content is only available via PDF.
You do not currently have access to this chapter.
Email alerts
Related Chapters
Reconstitution of Sub Charpy-size V-notched and Pre-Cracked Specimens
Small Specimen Test Techniques
Master Curve Evaluation of Irradiated Russian VVER Type Reactor Pressure Vessel Steels
Effects of Radiation on Materials: 20th International Symposium
Master Curve Characterization of Irradiation Embrittlement Using Standard and 1/3-Sized Precracked Charpy Specimens
Effects of Radiation on Materials: 20th International Symposium
Comparative Irradiation Study of Reactor Pressure-Vessel Steel Weld Metals
Effects of Radiation on Materials
Related Articles
A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing
J. Tribol (September,2024)
Dynamic Flowgraph Methodology Assessment of an FPGA-Based Postaccident Monitoring System for Westinghouse AP1000 Nuclear Power Plants
ASME J of Nuclear Rad Sci (July,2015)
Electrical Power System Modeling of Atucha II Nuclear Power Plant Using etap
ASME J of Nuclear Rad Sci (April,2019)
