Skip to Main Content
Skip Nav Destination
ASTM Selected Technical Papers
MiCon 90: Advances in Video Technology for Microstructural Control
By
GF Vander Voort
GF Vander Voort
1
Carpenter Technology Corporation
?
Symposium chairman and editor
Search for other works by this author on:
ISBN-10:
0-8031-1399-4
ISBN:
978-0-8031-1399-2
No. of Pages:
397
Publisher:
ASTM International
Publication date:
1991

High speed tool steels contain substantial amounts of carbon and carbide formers. The resulting carbides provide high hot hardness, but they also make the high speed steels difficult to form by hot working or by grinding. The benefits and difficulties of the high speed steels are both extreme in T-15, since it is one of the most highly alloyed of the high speed steels. T-15 is therefore a prime candidate for powder metallurgy techniques, because the fine, uniformly distributed carbides provided by the process greatly improve workability and grindability with no sacrifice in hot hardness. One commercial method for consolidating powder is the Consolidation by Atmospheric Pressure (CAP) process. The CAP process requires high sintering temperatures which produce a variety of carbide sizes in the finished product. A useful rating of carbide sizes was obtained from semi-automatic image analysis of T-15. Carbide ratings can be roughly correlated to grindability. Use of this rating system facilitated the determination and adjustment of necessary processing parameters to consistently produce a superior material.

This content is only available via PDF.
You do not currently have access to this chapter.
Close Modal

or Create an Account

Close Modal
Close Modal