Skip Nav Destination
ASTM Selected Technical Papers
Advances in Thermoplastic Matrix Composite MaterialsAvailable to Purchase
By
GM Newaz
GM Newaz
1
Battelle Memorial Institute
, Columbus, OH
; symposium chairman and editor
Search for other works by this author on:
ISBN-10:
0-8031-1272-6
ISBN:
978-0-8031-1272-8
No. of Pages:
315
Publisher:
ASTM International
Publication date:
1989
eBook Chapter
A Study of Graphite/PEEK Under High Temperatures Available to Purchase
By
J Ramey
,
J Ramey
1
Graduate student
, Air Force Institute of Technology
, Wright-Patterson Air Force Base, OH 45433
.
Search for other works by this author on:
A Palazotto
A Palazotto
2
Professor
, Aeronautics and Astronautics Department, Air Force Institute of Technology
, Wright-Patterson Air Force Base, OH 45433
.
Search for other works by this author on:
Page Count:
22
-
Published:1989
Citation
Ramey, J, & Palazotto, A. "A Study of Graphite/PEEK Under High Temperatures." Advances in Thermoplastic Matrix Composite Materials. Ed. Newaz, G. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 1989.
Download citation file:
An experimental evaluation of graphite/PEEK, APC-2, was carried out on specimens with various size holes acting under tension and compression loading. Quasiisotropic symmetrical laminates were tested at RT, 121, 135, and 149°C, and the Pipes three-parameter failure criterion was correlated with experimental results. Scanning electron microscopy photographs were used to determine specific notch effects on failure modes.
References
1.
Hartness
, J. T.
, “Polyether-ether-ketone Matrix Composite
,” SAMPE Quarterly
0036-0821, 08
01
1983
, pp. 33–37.2.
Cebe
, P.
, Hong
, S. D.
, Chung
, S.
, and Gupta
, A.
, “Mechanical Properties and Morphology of Poly (etheretherketone)
,” Toughened Composites
, ASTM STP 937, Johnston
Norman J.
, Ed., American Society for Testing and Materials
, 1987
, pp. 342–357.3.
Leach
, D. C.
, Curtis
, D. C.
, and Tamblen
, D. R.
, “Delamination Behavior of Carbon Fiber/Poly (etheretherketone) (PEEK) Composites
,” Toughened Composites
, ASTM STP 937, Johnston
Norman J.
, Ed., American Society for Testing and Materials
, 1987
, pp. 358–380.4.
Harness
, J. T.
, “An Evaluating of Poly-Ether-Ether-Ketone Matrix Composite Fabricated from Unidirectional Prepreg Tape
,” Proceedings of the 29th National SAMPE Symposium
, Vol. 29
, Society for the Advancement of Materials and Process Engineering
, Covina, CA
, 1984
, pp. 459–474.5.
Malik
, B.
, Palazotto
, A.
, and Whitney
, J.
, “Notch Strength of Gr/PEEK Composite Material at Elevated Temperatures
,” AIAA paper 85-0648, presented at the 1985 AIAA Structures, Structural Dynamics, and Materials Conference, Orlando, FL
, 04
1985
.6.
Whitney
, J. M.
and Nuismer
, R. J.
, “Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations
,” Journal of Composites
, Vol. 8
, July, 1974, pp. 253–275.7.
Awerbuck
, J.
and Madhukar
, M. S.
, “Notched Strength of Composite Laminate: Predictions and Experiments, A Review
,” Journal of Reinforced Plastics and Composites
. Vol. 4
, January, 1985, pp. 3–159.8.
Pipes
, R. B.
, Wetherhold
, R. C.
, and Gillispie
, J. W.
, “Notched Strength of Gr/PEEK Composite Materials
,” Journal of Composite Materials
, Vol. 13
, April, 1979, pp. 148–160.9.
Donaldson
, S. L.
, “Fractography of Mixed Mode I-II Failure in Graphite/Epoxy and Graphite/Thermoplastic Unidirectional Composites
,” AFWAL Technical Report 84-4186, Materials Laboratory
, Wright-Patterson Air Force Base, Ohio, 1984
.10.
Starnes
, J. H.
Jr., and Williams
, J. G.
, “Failure Characteristics of Graphite—Epoxy Structural Components Loaded in Compression
,” Mechanics of Composite Materials—Recent Advances, Proceedings of the IUTAM Symposium on Mechanics of Composite Materials
, Virginia Polytechnic Institute and State University
, Blacksburg Virginia
, 16–19 Aug. 1982, Hashin
Zui
and Herakovich
Carl T.
Eds., Pergamon Press
, Elmsford, NY
, pp. 283–321.11.
Hahn
, H. T.
, Sobi
, M.
, and Moon
, S.
, “Compression Failure Mechanisms of Composite Structures
,” NASA CR 3988, 06
1986
.
This content is only available via PDF.
You do not currently have access to this chapter.
Email alerts
Related Chapters
Basic Concepts
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Strength of Woven-Fabric Composites with Drilled and Molded Holes
Composite Materials: Testing and Design (Eighth Conference)
Long-Term Hydrostatic Strength and Design of Thermoplastic Piping Compounds
Plastic Pipe and Fittings: Past, Present, and Future
Crack(s) in a Rod or a Plate by Energy Rate Analysis
The Stress Analysis of Cracks Handbook, Third Edition
Related Articles
Spatial Variation in Young Ovine Cortical Bone Properties
J Biomech Eng (June,2023)
Process-Induced History Effects on the Mechanical Behavior of Additively Manufactured IN718 Alloys
J. Eng. Mater. Technol (January,2025)
Stress-State, Temperature, and Strain Rate Dependence of Vintage ASTM A7 Steel
J. Eng. Mater. Technol (April,2019)
