Skip Nav Destination
100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 1975.
ASTM Selected Technical Papers
Composite ReliabilityAvailable to Purchase
By
EM Wu
EM Wu
1
Washington University
, St. Louis, Mo. 63130
; symposium chairman
.
Search for other works by this author on:
ISBN-10:
0-8031-0309-3
ISBN:
978-0-8031-0309-2
No. of Pages:
646
Publisher:
ASTM International
Publication date:
1975
Description
The symposium on Composite Reliability was presented in Las Vegas, Nev., 15-16 April 1974. The symposium was sponsored by Committee D30 on High Modulus Fibers and Their Composites, American Society for Testing and Materials, in cooperation with the American Institute of Aeronautics and Astronautics, American Society of Mechanical Engineers, and the American Institute of Mining, Metallurgical, and Petroleum Engineers. E. M. Wu, Washington University, presided as symposium chairman.
Wu, E.
Composite Reliability. ISBN-10: 0-8031-0309-3
ISBN: 978-0-8031-0309-2
No. of Pages: 646
ISBN (electronic): 978-0-8031-4660-0
Publisher: ASTM International
Published: 1975
Download citation file:
Table of Contents
-
IntroductionByEM WuEM Wu1Washington University,St. Louis, Mo. 63130;symposium chairman.Search for other works by this author on:
-
Some Approaches to Assessing Failure Probabilities of Redundant StructuresByJF McCarthy, Jr,JF McCarthy, Jr1Professor and lecturer, respectively, inAeronautics and Astronautics, Massachusetts Institute of Technology,Cambridge, Mass. 02139.Search for other works by this author on:O OrringerO Orringer1Professor and lecturer, respectively, inAeronautics and Astronautics, Massachusetts Institute of Technology,Cambridge, Mass. 02139.Search for other works by this author on:
-
Probabilistic Design of Composite StructuresByRE Maxwell,RE Maxwell1Group supervisor of reliability engineering and lead engineer, respectively,Hercules Incorporated,Magna, Utah 84044.Search for other works by this author on:RH Toland,RH Toland2Assistant professor of mechanics,Drexel University,Philadelphia,Pa.19104.Search for other works by this author on:CW JohnsonCW Johnson1Group supervisor of reliability engineering and lead engineer, respectively,Hercules Incorporated,Magna, Utah 84044.Search for other works by this author on:
-
Structural Integrity Assessment of Filament-Wound ComponentsByEM Lenoe,EM Lenoe1Chief, Mechanics of Materials, and research mathematician, respectively,Army Materials and Mechanics Research Center,Watertown, Mass. 02172.Search for other works by this author on:D NealD Neal1Chief, Mechanics of Materials, and research mathematician, respectively,Army Materials and Mechanics Research Center,Watertown, Mass. 02172.Search for other works by this author on:
-
Statistical Analysis of Flaw Strength Spectra of High-Modulus FibersBySL PhoenixSL Phoenix1Senior research associate,Frabric Research Labs, An Albany International Co.,Dedham, Mass. 02026.Search for other works by this author on:
-
Evaluation of an Accelerated Characterization Technique for Reliability Assessment of Adhesive Joints
-
Reliability Aspects of a Composite Bolted Scarf JointByDL Reed,DL Reed1Senior structures engineer,General Dynamics, Fort Worth Division,Fort Worth, Tex. 76101.Search for other works by this author on:JR EisenmannJR Eisenmann1Senior structures engineer,General Dynamics, Fort Worth Division,Fort Worth, Tex. 76101.Search for other works by this author on:
-
Shear Property Measurements of Adhesives in Composite Material Bonded JointsByWJ Renton,WJ Renton1Research associate and chairman, respectively, Department of Mechanical and Aerospace Engineering,University of Delaware,Newark, Del. 19711.Search for other works by this author on:JR VinsonJR Vinson1Research associate and chairman, respectively, Department of Mechanical and Aerospace Engineering,University of Delaware,Newark, Del. 19711.Search for other works by this author on:
-
Measurement of Thermal and Mechanical Properties of Graphiteepoxy Composites for Precision ApplicationsByNP FreundNP Freund1Engineer, Metrology Department, Electro-Optical Manufacturing Division,The Perkin-Elmer Corp.,Norwalk, Conn. 06856.Search for other works by this author on:
-
Evaluation of Adhesive-Bonded Joints in Housing Components of Glass Fiber-Reinforced Polyester LaminateByLW Masters,LW Masters1Research chemist and research physicist, respectively, Structures, Materials and Safety Division,Center for Building Technology, Institute for Applied Technology, National Bureau of Standards,Washington, D.C. 20234.Search for other works by this author on:TW ReichardTW Reichard1Research chemist and research physicist, respectively, Structures, Materials and Safety Division,Center for Building Technology, Institute for Applied Technology, National Bureau of Standards,Washington, D.C. 20234.Search for other works by this author on:
-
Vibration Testing as a Nondestructive Test Tool for Composite MaterialsByRD Adams,RD Adams1Reader and research assistants, respectively, Department of Mechanical Engineering,University of Bristol,Bristol,U.K.Search for other works by this author on:D Walton,D Walton1Reader and research assistants, respectively, Department of Mechanical Engineering,University of Bristol,Bristol,U.K.Search for other works by this author on:JE Flitcroft,JE Flitcroft1Reader and research assistants, respectively, Department of Mechanical Engineering,University of Bristol,Bristol,U.K.Search for other works by this author on:D ShortD Short2Senior lecturer,School of Engineering Science, Plymouth Polytechnic,Plymouth,U.K.Search for other works by this author on:
-
Application of a Special X-Ray Nondestructive Testing Technique for Monitoring Damage Zone Growth in Composite LaminatesByFH Chang,FH Chang1Senior research scientist, project research scientist, senior structures engineer, and group design engineer, respectively,General Dynamics,Fort Worth, Tex. 76101.Search for other works by this author on:JC Couchman,JC Couchman1Senior research scientist, project research scientist, senior structures engineer, and group design engineer, respectively,General Dynamics,Fort Worth, Tex. 76101.Search for other works by this author on:JR Eisenmann,JR Eisenmann1Senior research scientist, project research scientist, senior structures engineer, and group design engineer, respectively,General Dynamics,Fort Worth, Tex. 76101.Search for other works by this author on:BGW YeeBGW Yee1Senior research scientist, project research scientist, senior structures engineer, and group design engineer, respectively,General Dynamics,Fort Worth, Tex. 76101.Search for other works by this author on:
-
Acoustic Emission from Stress Rupture and Fatigue of an Organic Fiber CompositeByMA Hamstad,MA Hamstad1Mechanical engineer and chemist, respectively,Lawrence Livermore Laboratory, University of California,Livermore, Calif. 94550.Search for other works by this author on:TT ChiaoTT Chiao1Mechanical engineer and chemist, respectively,Lawrence Livermore Laboratory, University of California,Livermore, Calif. 94550.Search for other works by this author on:
-
Spectrum Analysis of Acoustic Emissions from Boron-Aluminum CompositesByEG Henneke, II,EG Henneke, II1Associate professor of engineering science and mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:HW HerringHW Herring1Associate professor of engineering science and mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:
-
Damage Analysis in Composite Materials
-
Optimization of the Thermal Shock Resistance of Carbon-Carbon CompositesByTR Guess,TR Guess1Staff member, Composite Research and Development Department,Sandia Laboratories,Albuquerque, N. Mex. 87115.Search for other works by this author on:BL ButlerBL Butler1Staff member, Composite Research and Development Department,Sandia Laboratories,Albuquerque, N. Mex. 87115.Search for other works by this author on:
-
Kinetics of Environmental Degradation in Graphite-Epoxy LaminatesByDH Kaelble,DH Kaelble1Science Center, Rockwell International,Thousand Oaks, Calif. 91360.Search for other works by this author on:PJ Dynes,PJ Dynes1Science Center, Rockwell International,Thousand Oaks, Calif. 91360.Search for other works by this author on:LW Crane,LW Crane1Science Center, Rockwell International,Thousand Oaks, Calif. 91360.Search for other works by this author on:L MausL Maus2Tulsa Division,Rockwell International,Tulsa, Okla.Search for other works by this author on:
-
Stress Rupture of Glass-Epoxy Composites: Environmental and Stress EffectsByEM Wu,EM Wu1Associate professor, Department of Mechanical Engineering,Washington University,St. Louis, Mo. 63130.Search for other works by this author on:DC RuhmannDC Ruhmann2Senior engineer,McDonnell Douglas Astronautics Company-East,St. Louis, Mo. 63166.Search for other works by this author on:
-
Reliability of Composite Zero-Expansion Structures for Use in Orbital EnvironmentByLD BermanLD Berman1Assistant manager,Materials Engineering, TRW Systems,Redondo Beach, Calif. 90278.Search for other works by this author on:
-
Temperature Dependence of the Complex Modulus for Fiber-Reinforced MaterialsByRA Heller,RA Heller1Professor and graduate research assistants, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:AB Thakker,AB Thakker1Professor and graduate research assistants, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:CE ArthurCE Arthur1Professor and graduate research assistants, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:
-
Prediction of Transverse Strength and Scatter in Test Data for Unidirectional CompositesByLB GreszczukLB Greszczuk1Advance Structures and Mechanical Department,McDonnell Douglas Astronautics Company,Huntington Beach, Calif. 92647.Search for other works by this author on:
-
A Computational Procedure to Analyze Metal Matrix Laminates with Nonlinear Lamination Residual StrainsByCC Chamis,CC Chamis1Aerospace research engineer,NASA-Lewis Research Center,Cleveland, Ohio.Search for other works by this author on:TL SullivanTL Sullivan1Aerospace research engineer,NASA-Lewis Research Center,Cleveland, Ohio.Search for other works by this author on:
-
Measurement of Residual Strains in Boron-Epoxy and Glass-Epoxy LaminatesByIM Daniel,IM Daniel1Manager and senior research engineer, respectively,IIT Research Institute,Chicago, Ill. 60616.Search for other works by this author on:T Liber,T Liber1Manager and senior research engineer, respectively,IIT Research Institute,Chicago, Ill. 60616.Search for other works by this author on:CC ChamisCC Chamis2Aerospace engineer,NASA-Lewis Research Center,Cleveland, Ohio 44135.Search for other works by this author on:
-
Reducing Variability in Composite Tensile-Strength PropertiesByGJ Mills,GJ Mills1Assistant for technical planning, senior engineer, and research associaterespectively,Northrop Research & Technology Center, Northrop Corp.,Hawthorne, Calif. 90250.Search for other works by this author on:GG Brown,GG Brown1Assistant for technical planning, senior engineer, and research associaterespectively,Northrop Research & Technology Center, Northrop Corp.,Hawthorne, Calif. 90250.Search for other works by this author on:DR WatermanDR Waterman1Assistant for technical planning, senior engineer, and research associaterespectively,Northrop Research & Technology Center, Northrop Corp.,Hawthorne, Calif. 90250.Search for other works by this author on:
-
Compressive Strength of Fiber-Reinforced Composite MaterialsByJG Davis, JrJG Davis, Jr1Structural materials engineer,NASA-Langley Research Center,Hampton, Va. 23665.Search for other works by this author on:
-
Creep Analysis of LaminatesByRL FoyeRL Foye1Foye, R. L.,Aerospace technologist,U.S. Army Air Mobility Research & Development Laboratory, Langley Research Center,Hampton, Va. 23665.Search for other works by this author on:
-
Composite Matrix Fatigue Crazing—Detection and MeasurementByJE SchwabeJE Schwabe1Senior research engineer,Babcock & Wilcox Co., Alliance Research Center,Alliance, Ohio 44601.Search for other works by this author on:
-
Stress-Rupture Strength and Microstructural Stability of W-Hf-C Wire-Reinforced Superalloy CompositesByDW Petrasek,DW Petrasek1Lewis Research Center,Cleveland, Ohio 44135.Search for other works by this author on:RA SignorelliRA Signorelli1Lewis Research Center,Cleveland, Ohio 44135.Search for other works by this author on:
-
Frequency Effects on Flawed-Composite Fatigue ReliabilityByKL Reifsnider,KL Reifsnider1Associate professor, assistant professor, and graduate students, respectively, Engineering Science and Mechanics Department,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:WW Stinchomb,WW Stinchomb1Associate professor, assistant professor, and graduate students, respectively, Engineering Science and Mechanics Department,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:RS Williams,RS Williams1Associate professor, assistant professor, and graduate students, respectively, Engineering Science and Mechanics Department,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:HM TurgayHM Turgay1Associate professor, assistant professor, and graduate students, respectively, Engineering Science and Mechanics Department,Virginia Polytechnic Institute and State University,Blacksburg, Va. 24061.Search for other works by this author on:
-
Some Observations on the Dynamic Fracture Behavior of Carbon Fiber-strengthened Epoxy ResinByPWR Beaumont,PWR Beaumont1Lecturer in the Department of Engineering,University of Cambridge,Cambridge,.EnglandSearch for other works by this author on:WL ServerWL Server2Research Manager,Effects Technology Inc.,Santa Barbara, Calif.Search for other works by this author on:
-
Impact Damage Effects on Boron-Aluminum CompositesByJC Carlisle,JC Carlisle1Graduate student, materials engineer, graduate student, and assistant professor, respectively,U. S. Air Force Institute of Technology,Dayton, Ohio 45433.Search for other works by this author on:RL Crane,RL Crane1Graduate student, materials engineer, graduate student, and assistant professor, respectively,U. S. Air Force Institute of Technology,Dayton, Ohio 45433.Search for other works by this author on:WJ Jaques,WJ Jaques1Graduate student, materials engineer, graduate student, and assistant professor, respectively,U. S. Air Force Institute of Technology,Dayton, Ohio 45433.Search for other works by this author on:LT MontulliLT Montulli1Graduate student, materials engineer, graduate student, and assistant professor, respectively,U. S. Air Force Institute of Technology,Dayton, Ohio 45433.Search for other works by this author on:
-
Molecular Correlations with Fracture in Fibers and Granular-Filled CompositesByKL DeVries,KL DeVries1Professor of mechanical engineering, post-doctoral fellow, and research assistant, respectively, Mechanical Engineering Department,University of Utah,Salt Lake City, Utah.Search for other works by this author on:BA Lloyd,BA Lloyd1Professor of mechanical engineering, post-doctoral fellow, and research assistant, respectively, Mechanical Engineering Department,University of Utah,Salt Lake City, Utah.Search for other works by this author on:TB WildeTB Wilde1Professor of mechanical engineering, post-doctoral fellow, and research assistant, respectively, Mechanical Engineering Department,University of Utah,Salt Lake City, Utah.Search for other works by this author on:
-
Determination of Fracture Strength in Orthotropic Graphite-Epoxy LaminatesByHJ Konish, Jr,HJ Konish, Jr1National Research Council research associate,Air Force Materials Laboratory, Wright-Patterson Air Force Base,Ohio 45433. Presently Advanced Reactor Division,Westinghouse Electric Corp.,Madison, Pa. 15663.Search for other works by this author on:TA CruseTA Cruse2Senior assistant project engineer, Pratt and Whitney Aircraft Division,United Aircraft Corp.,East Hartford, Conn. 06108.Search for other works by this author on:
-
Fracture Behavior of Unidirectionally Solidified Ti-Ti5Ge3 Eutectic CompositesByAS Yue,AS Yue1Professor of engineering and applied science and graduate student, respectively, Materials Department,University of California,Los Angeles, Calif. 90024.Search for other works by this author on:BT KabaBT Kaba1Professor of engineering and applied science and graduate student, respectively, Materials Department,University of California,Los Angeles, Calif. 90024.Search for other works by this author on:
-
Fatigue Crack Propagation Rates in Woven and Nonwoven Fiber Glass LaminatesByJF MandellJF Mandell1Research associate, Department of Materials Science and Engineering,Massachusetts Institute of Technology,Cambridge, Mass. 02139.Search for other works by this author on:
-
Fracture Behavior of Thornel 300/5208 Graphite-Epoxy Laminates—Part 1: Unnotched LaminatesByGP Sendeckyj,GP Sendeckyj1Aerospace engineer, project engineer, and instrumentation engineer, respectively, Structures Division,Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base,Dayton, Ohio 45433.Search for other works by this author on:MD Richardson,MD Richardson1Aerospace engineer, project engineer, and instrumentation engineer, respectively, Structures Division,Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base,Dayton, Ohio 45433.Search for other works by this author on:JE PappasJE Pappas1Aerospace engineer, project engineer, and instrumentation engineer, respectively, Structures Division,Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base,Dayton, Ohio 45433.Search for other works by this author on:
-
Fatigue, Creep, and Impact Resistance of Aramid Fiber Reinforced CompositesByLH Miner,LH Miner1Technical marketing representative, technical marketing specialist, and senior research engineer, respectively,E. I. du Pont de Nemours & Co., Inc., Industrial Fibers Division, Textile Fibers Department,Wilmington, Del. 19898.Search for other works by this author on:RA Wolffe,RA Wolffe1Technical marketing representative, technical marketing specialist, and senior research engineer, respectively,E. I. du Pont de Nemours & Co., Inc., Industrial Fibers Division, Textile Fibers Department,Wilmington, Del. 19898.Search for other works by this author on:CH ZwebenCH Zweben1Technical marketing representative, technical marketing specialist, and senior research engineer, respectively,E. I. du Pont de Nemours & Co., Inc., Industrial Fibers Division, Textile Fibers Department,Wilmington, Del. 19898.Search for other works by this author on:
-
Thermal Conductivity of High-Modulus Carbon FibersByIL KalninIL Kalnin1Research associate,Celanese Research Co.,Summit, N.J. 07901.Search for other works by this author on:
-
Thermoelastic Expansion of Graphite-Epoxy Unidirectional and Angle-Ply CompositesByASD Wang,ASD Wang1Visiting professor,National Taiwan University and Chung-Shan Research Institute of Science and Technology,.Taiwan, ChinaSearch for other works by this author on:RB Pipes,RB Pipes2Associate professor of mechanical and aerospace engineering,University of Delaware,Newark, Del. 19711.Search for other works by this author on:A AhmadiA Ahmadi3Visiting assistant professor of civil engineering,Drexel University,Philadelphia, Pa. 19104.Search for other works by this author on:
-
Properties of Filamentary-Reinforced Composites at Cryogenic TemperaturesByMB KasenMB Kasen1Staff scientist,Cryogenic, NBS-Institute for Basic Standards,Boulder, Colo. 80302.Search for other works by this author on:
-
Tensile Properties of an Ultrahigh-Strength Graphite Fiber in an Epoxy MatrixByTT Chiao,TT Chiao1Chemist, mechanical engineer, and technical associate, respectively,University of California, Lawrence Livermore Laboratory,Livermore, Calif. 94550.Search for other works by this author on:MA Hamstad,MA Hamstad1Chemist, mechanical engineer, and technical associate, respectively,University of California, Lawrence Livermore Laboratory,Livermore, Calif. 94550.Search for other works by this author on:ES JessopES Jessop1Chemist, mechanical engineer, and technical associate, respectively,University of California, Lawrence Livermore Laboratory,Livermore, Calif. 94550.Search for other works by this author on:
-
Heat-Treatable Cladding for New Aluminum Alloy 7050-T76 SheetByJT StaleyJT Staley1Section head,Alcoa Laboratories, Alcoa Technical Center, Alcoa Center,Pa. 15069.Search for other works by this author on:
Email alerts
Copyright
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of the publisher.
© 1975
ASTM International
