This paper presents a comprehensive review and comparison of different theories and models for water vapor pressure under rapid heating in moisture permeable materials, such as polymers or polymer composites. Numerous studies have been conducted, predominately in microelectronics packaging community, to obtain the understanding of vapor pressure evolution during soldering reflow for encapsulated moisture. Henry's law-based models are introduced first. We have shown that various models can be unified to a general form of solution. Two key parameters are identified for determining vapor pressure: the initial relative humidity and the net heat of solution. For materials with nonlinear sorption isotherm, the analytical solutions for maximum vapor pressure are presented. The predicted vapor pressure, using either linear sorption isotherm (Henry's law) or nonlinear sorption isotherm, can be greater than the saturated water vapor pressure. Such an “unphysical” pressure solution needs to be further studied. The predicted maximum vapor pressure is proportional to the initial relative humidity, implying the history dependence. Furthermore, a micromechanics-based vapor pressure model is introduced, in which the vapor pressure depends on the state of moisture in voids. It is found that the maximum vapor pressure stays at the saturated vapor pressure provided that the moisture is in the mixed liquid/vapor phase in voids. And, the vapor pressure depends only on the current state of moisture condition. These results are contradictory to the model predictions with sorption isotherm theories. The capillary effects are taken into consideration for the vapor pressure model using micromechanics approach.

References

References
1.
Zhang
,
G. Q.
,
Van Driel
,
W. D.
, and
Fan
,
X. J.
,
2006
,
Mechanics of Microelectronics
,
Springer
,
New York
.
2.
Fan
,
X. J.
, and
Suhir
,
E.
,
2010
,
Moisture Sensitivity of Plastic Packages of IC Devices
,
Springer
,
New York
.
3.
Antoon
,
M. K.
, and
Koenig
,
J. L.
,
1980
, “
The Structure and Moisture Stability of the Matrix Phase in Glass-Reinforced Epoxy Composites
,”
J. Macromol. Sci., Part C
,
19
(
1
), pp.
135
173
.
4.
Baschek
,
G.
,
Hartwig
,
G.
, and
Zahradnik
,
F.
,
1999
, “
Effect of Water Absorption in Polymers at Low and High Temperatures
,”
Polymer
,
40
(
12
), pp.
3433
3441
.
5.
Fan
,
X. J.
,
Lee
,
S. W. R.
, and
Han
,
Q.
,
2009
, “
Experimental Investigations and Model Study of Moisture Behaviors in Polymeric Materials
,”
Microelectron. Reliab.
,
49
(
8
), pp.
861
871
.
6.
Placette
,
M. D.
,
Fan
,
X. J.
,
Zhao
,
J.-H.
, and
Edwards
,
D.
,
2012
, “
Dual Stage Modeling of Moisture Absorption and Desorption in Epoxy Mold Compounds
,”
Microelectron. Reliab.
,
52
(
7
), pp.
1401
1408
.
7.
De'Nève
,
B.
, and
Shanahan
,
M. E. R.
,
1993
, “
Water Absorption by an Epoxy Resin and Its Effect on the Mechanical Properties and Infra-Red Spectra
,”
Polymer
,
34
(
24
), pp.
5099
5105
.
8.
Zhou
,
J.
, and
Law
,
J. S.
,
2008
, “
Effect of Non-Uniform Moisture Distribution on the Hygroscopic Swelling Coefficient
,”
IEEE Trans. Compon. Packag. Technol.
,
31
(
2
), pp.
269
276
.
9.
Stokes
,
E. H.
,
1993
, “
Anomalous Swelling Behavior of FM 5055 Carbon Phenolic Composite
,”
AIAA J.
,
31
(
3
), pp.
584
589
.
10.
Benkeddad
,
A.
,
Grédiac
,
M.
, and
Vautrin
,
A.
,
1995
, “
On the Transient Hygroscopic Stresses in Laminated Composite Plates
,”
Compos. Struct.
,
30
(
2
), pp.
201
215
.
11.
Secrist
,
K. E.
, and
Nolte
,
A. J.
,
2011
, “
Humidity Swelling/Deswelling Hysteresis in a Polyelectrolyte Multilayer Film
,”
Macromolecules
,
44
(8), pp.
2859
2865
.
12.
Shirangi
,
M. H.
, and
Michel
,
B.
,
2010
, “
Mechanism of Moisture Diffusion, Hygroscopic Swelling, and Adhesion Degradation in Epoxy Molding Compounds
,”
Moisture Sensitivity of Plastic Packages of IC Devices
,
X. J.
Fan
and
E.
Suhir
, eds.,
Springer
,
Boston, MA
, pp.
29
69
.
13.
LaPlante
,
G.
, and
Lee-Sullivan
,
P.
,
2005
, “
Moisture Effects on FM300 Structural Film Adhesive: Stress Relaxation, Fracture Toughness, and Dynamic Mechanical Analysis
,”
J. Appl. Polym. Sci.
,
95
(
5
), pp.
1285
1294
.
14.
Dhakal
,
H. N.
,
Zhang
,
Z. Y.
, and
Richardson
,
M. O. W.
,
2007
, “
Effect of Water Absorption on the Mechanical Properties of Hemp Fibre Reinforced Unsaturated Polyester Composites
,”
Compos. Sci. Technol.
,
67
(
7–8
), pp.
1674
1683
.
15.
Toubal
,
L.
,
Cuillière
,
J.-C.
,
Bensalem
,
K.
,
Francois
,
V.
, and
Gning
,
P.-B.
,
2016
, “
Hygrothermal Effect on Moisture Kinetics and Mechanical Properties of Hemp/Polypropylene Composite: Experimental and Numerical Studies
,”
Polym. Compos.
,
37
(
8
), pp.
2342
2352
.
16.
Fan
,
X. J.
,
Zhang
,
G. Q.
,
van Driel
,
W. D.
, and
Ernst
,
L. J.
,
2008
, “
Interfacial Delamination Mechanisms During Soldering Reflow With Moisture Preconditioning
,”
IEEE Trans. Compon. Packag. Technol.
,
31
(2), pp.
252
259
.
17.
van Driel
,
W. D.
,
van Gils
,
M. A. J.
,
Fan
,
X. J.
,
Zhang
,
G. Q.
, and
Ernst
,
L. J.
,
2008
, “
Driving Mechanisms of Delamination Related Reliability Problems in Exposed Pad Packages
,”
IEEE Trans. Compon. Packag. Technol.
,
31
(
2
), pp.
260
268
.
18.
Shi
,
X. Q.
,
Zhang
,
Y. L.
,
Wei
,
Z.
, and
Fan
,
X. J.
,
2008
, “
Effect of Hygrothermal Aging on Interfacial Reliability of Silicon/Underfill/FR-4 Assembly
,”
IEEE Trans. Compon. Packag. Technol.
,
31
(
1
), pp.
94
103
.
19.
Chateauminois
,
A.
,
Vincent
,
L.
,
Chabert
,
B.
, and
Soulier
,
J. P.
,
1994
, “
Study of the Interfacial Degradation of a Glass-Epoxy Composite During Hygrothermal Ageing Using Water Diffusion Measurements and Dynamic Mechanical Thermal Analysis
,”
Polymer
,
35
(
22
), pp.
4766
4774
.
20.
Chunhua
,
G.
,
Li
,
M.
,
Kewei
,
C.
,
Haibin
,
C.
, and
Jingshen
,
W.
,
2012
, “
Effects of Moisture Absorption and Temperature on the Adhesion Strength Between Die Attach Film (DAF) and Silicon Die
,”
14th International Conference on Electronic Materials and Packaging
(
EMAP
), Lantau Island, China Dec. 13–16, pp. 1–4.
21.
Dai
,
T.
, and
Dai
,
H.-L.
,
2016
, “
Hygrothermal Behavior of a CFRR-Metal Adhesively Bonded Joint With Coupled Transfer of Heat and Moisture Through the Thickness
,”
Compos. Struct.
,
152
, pp.
947
958
.
22.
Yao
,
Y.
,
Long
,
X.
, and
Keer
,
L. M.
,
2017
, “
A Review of Recent Research on the Mechanical Behavior of Lead-Free Solders
,”
ASME Appl. Mech. Rev.
,
69
(
4
), p.
040802
.
23.
Fukuzawa
,
I.
,
Ishiguro
,
S.
, and
Nanbu
,
S.
,
1985
, “
Moisture Resistance Degradation of Plastic LSIs by Reflow Soldering
,”
23rd Annual International Reliability Physics Symposium
, Orlando, FL, Mar. 25–29, pp. 192–197.
24.
Kitano
,
M.
,
Nishimura
,
A.
,
Kawai
,
S.
, and
Nishi
,
K.
,
1988
, “
Analysis of Package Cracking During Reflow Soldering Process
,”
26th Annual Proceedings Reliability Physics Symposium
, Monterey, CA, Apr. 12–14, pp. 90–95.
25.
Liu
,
S.
, and
Mei
,
Y.
,
1995
, “
Behavior of Delaminated Plastic IC Packages Subjected to Encapsulation Cooling, Moisture Absorption, and Wave Soldering
,”
IEEE Trans. Compon. Packag. Manuf. Technol., Part A
,
18
(3), pp.
634
645
.
26.
Gallo
,
A. A.
, and
Munamarty
,
R.
,
1995
, “
Popcorning: A Failure Mechanism in Plastic-Encapsulated Microcircuits
,”
IEEE Trans. Reliab.
,
44
(
3
), pp.
362
367
.
27.
Seol
,
K.-W.
,
Choi
,
C.-H.
,
Kim
,
S.
,
Son
,
S. H.
, and
Lee
,
J. K.
,
2003
, “
On the Mechanism of Popcorn Blistering in Copper Clad Laminates
,”
J. Adhes. Sci. Technol.
,
17
(
10
), pp.
1331
1349
.
28.
Xie
,
B.
,
Fan
,
X. J.
,
Shi
,
X. Q.
, and
Ding
,
H.
,
2009
, “
Direct Concentration Approach of Moisture Diffusion and Whole Field Vapor Pressure Modeling for Reflow Process—Part II: Application to 3-D Ultra-Thin Stacked-Die Chip Scale Packages
,”
ASME J. Electron. Packag.
,
131
(
3
), p.
031011
.
29.
Czabaj
,
M. W.
,
Zehnder
,
A. T.
, and
Chuang
,
K. C.
,
2009
, “
Blistering of Moisture Saturated Graphite/Polyimide Composites Due to Rapid Heating
,”
J. Compos. Mater.
,
43
(
2
), pp.
153
174
.
30.
Zehnder
,
A. T.
, and
Czabaj
,
M. W.
,
2006
, “
Delamination and Blistering due to Rapid Heating of Moist Composites
,”
ASME
Paper No. IMECE2006-14669.
31.
Tee
,
T. Y.
, and
Zhong
,
Z.
,
2004
, “
Integrated Vapor Pressure, Hygroswelling, and Thermo-Mechanical Stress Modeling of QFN Package During Reflow With Interfacial Fracture Mechanics Analysis
,”
Microelectron. Reliab.
,
44
(
1
), pp.
105
114
.
32.
Zhu
,
L.
,
Jiang
,
Z.
, and
Fan
,
X. J.
,
2014
, “
Rupture and Instability of Soft Films Due to Moisture Vaporization in Microelectronic Devices
,”
Comput. Mater. Continua
,
39
(2), pp.
113
134
.http://www.techscience.com/doi/10.3970/cmc.2014.039.113.pdf
33.
Sullivan
,
R. M.
,
1996
, “
The Effect of Water on Thermal Stresses in Polymer Composites
,”
ASME J. Appl. Mech.
,
63
(
1
), pp.
173
179
.
34.
Wong
,
E. H.
,
Koh
,
S. W.
,
Lee
,
K. H.
,
Kian-Meng
,
L.
,
Lim
,
T. B.
, and
Mai
,
Y.-W.
,
2006
, “
Advances in Vapor Pressure Modeling for Electronic Packaging
,”
IEEE Trans. Adv. Packag.
,
29
(
4
), pp.
751
759
.
35.
Shirley
,
C. G.
,
2014
, “
Popcorn Cavity Pressure
,”
IEEE Trans. Device Mater. Reliab.
,
14
(
1
), pp.
426
431
.
36.
Hui
,
C.-Y.
,
Muralidharan
,
V.
, and
Thompson
,
M. O.
,
2005
, “
Steam Pressure Induced in Crack-Like Cavities in Moisture Saturated Polymer Matrix Composites During Rapid Heating
,”
Int. J. Solids Struct.
,
42
(
3–4
), pp.
1055
1072
.
37.
Muralidharan
,
V.
,
Hui
,
C.-Y.
,
Krishnan
,
V. R.
, and
Papoulia
,
K. D.
,
2006
, “
A Flow Through Porous Media Model for Pore Pressure During Heating of Polymer–Matrix Composites
,”
Compos. Sci. Technol.
,
66
(
10
), pp.
1409
1417
.
38.
Fan
,
X. J.
, and
Lim
,
T. B.
,
1999
, “
Mechanism Analysis for Moisture-Induced Failures in IC Packages
,” ASME International Mechanical Engineering Congress and Exposition, Nashville, TN, Nov. 14–19, Paper No. IMECE/EPE-14.
39.
Fan
,
X. J.
,
Zhou
,
J.
,
Zhang
,
G. Q.
, and
Ernst
,
L. J.
,
2005
, “
A Micromechanics Based Vapor Pressure Model in Electronic Packages
,”
ASME J. Electron. Packag.
,
127
(
3
), pp.
262
267
.
40.
Xie
,
B.
,
Fan
,
X. J.
,
Shi
,
X. Q.
, and
Ding
,
H.
,
2009
, “
Direct Concentration Approach of Moisture Diffusion and Whole Field Vapor Pressure Modeling for Reflow Process—Part I: Theory and Numerical Implementation
,”
ASME J. Electron. Packag.
,
131
(
3
), p.
031010
.
41.
Fan
,
X. J.
,
Chen
,
L.
,
Wong
,
C. P.
, and
Zhang
,
G. Q.
,
2015
, “
Effects of Vapor Pressure and Super-Hydrophobic Nanocomposite Coating on Microelectronics Reliability
,”
Engineering
,
1
(
3
), pp.
384
390
.
42.
Chen
,
L.
,
Zhou
,
J.
,
Chu
,
H.-W.
,
Zhang
,
G. Q.
, and
Fan
,
X. J.
,
2017
, “A Unified and Versatile Model Study for Moisture Diffusion,” 67th Electronic Components and Technology Conference (
ECTC
), Orlando, FL, May 30–June 2, pp. 2377–5726.
43.
Bhattacharyya
,
B. K.
,
Huffman
,
W. A.
,
Jahsman
,
W. E.
, and
Natarajan
,
B.
,
1988
, “
Moisture Absorption and Mechanical Performance of Surface Mountable Plastic Packages
,”
38th Electronics Components Conference
, Los Angeles, CA, May 9–11, pp. 49–58.
44.
Chen
,
L.
,
Chu
,
H. W.
, and
Fan
,
X. J.
,
2015
, “
A Convection–Diffusion Porous Media Model for Moisture Transport in Polymer Composites: Model Development and Validation
,”
J. Polym. Sci. B
,
53
(
20
), pp.
1440
1449
.
45.
Chen
,
L.
,
Adams
,
J.
,
Chu
,
H.-W.
, and
Fan
,
X. J.
,
2016
, “
Modeling of Moisture Over-Saturation and Vapor Pressure in Die-Attach Film for Stacked-Die Chip Scale Packages
,”
J. Mater. Sci. Mater. Electron.
,
27
(
1
), pp.
481
488
.
46.
Alpern
,
P.
,
Lee
,
K. C.
,
Dudek
,
R.
, and
Tilgner
,
R.
,
2000
, “
A Simple Model for the Mode I Popcorn Effect for IC Packages
,”
Microelectron. Reliab.
,
40
(
8–10
), pp.
1503
1508
.
47.
Tay
,
A. A. O.
, and
Lin
,
T. Y.
,
1996
, “
Moisture Diffusion and Heat Transfer in Plastic IC Packages
,”
IEEE Trans. Compon. Packag. Technol., Part A
,
19
(
2
), pp. 186–193.
48.
Wang
,
Z.
,
2011
, “
Vapour Pressure Modelling for Plastic Encapsulated Microelectronics Subjected to Lead-Free Solder Reflow Profile
,”
Strain
,
47
(s1), pp.
e148
e155
.
49.
Bao
,
L.-R.
, and
Yee
,
A. F.
,
2002
, “
Effect of Temperature on Moisture Absorption in a Bismaleimide Resin and Its Carbon Fiber Composites
,”
Polymer
,
43
(
14
), pp.
3987
3997
.
50.
VanSant
,
J. H.
,
1983
, Conduction Heat Transfer Solutions, Lawrence Livermore National Laboratory, Livermore, CA.
51.
Shirley
,
C. G.
,
1994
, “
THB Reliability Models and Life Prediction for Intermittently-Powered Nonhermetic Components
,”
32nd Annual International Reliability Physics Symposium
, San Jose, CA, Apr. 11–14, pp. 72–77.
52.
Haynes
,
W. M.
,
2013
,
CRC Handbook of Chemistry and Physics
,
94th ed.
,
Taylor & Francis
,
Boston, MA
.
53.
Hollenbeck
,
R. G.
,
Peck
,
G. E.
, and
Kildsig
,
D. O.
,
1978
, “
Application of Immersional Calorimetry to Investigation of Solid-Liquid Interactions: Microcrystalline Cellulose-Water System
,”
J. Pharm. Sci.
,
67
(
11
), pp.
1599
1606
.
54.
Tcharkhtchi
,
A.
,
Bronnec
,
P. Y.
, and
Verdu
,
J.
,
2000
, “
Water Absorption Characteristics of Diglycidyl ether of Butane Diol–3,5-Diethyl-2,4-Diaminotoluene Networks
,”
Polymer
,
41
(
15
), pp.
5777
5785
.
55.
Yasuda
,
H.
, and
Stannett
,
V.
,
1962
, “
Permeation, Solution, and Diffusion of Water in Some High Polymers
,”
J. Polym. Sci.
,
57
(
165
), pp.
907
923
.
56.
Rouse
,
P. E.
,
1947
, “
Diffusion of Vapors in Films
,”
J. Am. Chem. Soc.
,
69
(
5
), pp.
1068
1073
.
57.
Chern
,
R. T.
,
Koros
,
W. J.
,
Sanders
,
E. S.
, and
Yui
,
R.
,
1983
, “
Second Component” Effects in Sorption and Permeation of Gases in Glassy Polymers
,”
J. Membr. Sci.
,
15
(
2
), pp.
157
169
.
58.
Koros
,
W. J.
,
Chan
,
A. H.
, and
Paul
,
D. R.
,
1977
, “
Sorption and Transport of Various Gases in Polycarbonate
,”
J. Membr. Sci.
,
2
, pp.
165
190
.
59.
Roussis
,
P. P.
,
1981
, “
Diffusion of Water Vapour in Cellulose Acetate—1: Differential Transient Sorption Kinetics and Equilibria
,”
Polymer
,
22
(
6
), pp.
768
773
.
60.
Ghosh
,
M.
,
1996
,
Polyimides: Fundamentals and Applications
,
CRC Press
,
Boca Raton, FL
.
61.
Basu
,
S.
,
Shivhare
,
U. S.
, and
Mujumdar
,
A. S.
,
2006
, “
Models for Sorption Isotherms for Foods: A Review
,”
Drying Technol.
,
24
(
8
), pp.
917
930
.
62.
Vieth
,
W. R.
,
Howell
,
J. M.
, and
Hsieh
,
J. H.
,
1976
, “
Dual Sorption Theory
,”
J. Membr. Sci.
,
1
, pp.
177
220
.
63.
Kanapitsas
,
A.
,
Tsonos
,
C.
,
Psarras
,
G. C.
, and
Kripotou
,
S.
,
2016
, “
Barium Ferrite/Epoxy Resin Nanocomposite System: Fabrication, Dielectric, Magnetic and Hydration Studies
,”
Express Polym. Lett.
,
10
(
3
), pp.
227
236
.
64.
Brunauer
,
S.
,
1945
,
The Adsorption of Gases and Vapors, Physical Adsorption
, Vol.
I
,
Princeton University Press
,
Princeton, NJ
.
65.
McLaughlin
,
C. P.
, and
Magee
,
T. R. A.
,
1998
, “
The Determination of Sorption Isotherm and the Isosteric Heats of Sorption for Potatoes
,”
J. Food Eng.
,
35
(
3
), pp.
267
280
.https://doi.org/10.1016/S0260-8774(98)00025-9
66.
Kapsalis
,
J. G.
,
1987
, “
Influence of Hysteresis and Temperature on Moisture Sorption Isotherms in Water Activity
,”
Theory and Applications to Foods
,
L. B.
Rokcland
and
L. R.
Beuchat
, eds.,
Marcel Dekker
,
New York
, pp.
173
213
.
67.
Poyet
,
S.
, and
Charles
,
S.
,
2009
, “
Temperature Dependence of the Sorption Isotherms of Cement-Based Materials: Heat of Sorption and Clausius–Clapeyron Formula
,”
Cem. Concr. Res.
,
39
(
11
), pp.
1060
1067
.
68.
Glicksman
,
M. E.
,
1999
,
Diffusion in Solids: Field Theory, Solid-State Principles, and Applications
,
Wiley
, Hoboken, NJ.
69.
Zhang
,
M.
,
Ye
,
G.
, and
van Breugel
,
K.
,
2014
, “
Multiscale Lattice Boltzmann-Finite Element Modelling of Chloride Diffusivity in Cementitious Materials—Part I: Algorithms and Implementation
,”
Mech. Res. Commun.
,
58
, pp.
53
63
.
70.
Chen
,
L.
,
Zhou
,
J.
,
Chu
,
H.-W.
,
Zhang
,
G.
, and
Fan
,
X.
,
2017
, “
Modeling Nonlinear Moisture Diffusion in Inhomogeneous Media
,”
Microelectron. Reliab.
,
75
, pp.
162
170
.
71.
Bond
,
D. A.
, and
Smith
,
P. A.
,
2006
, “
Modeling the Transport of Low-Molecular-Weight Penetrants Within Polymer Matrix Composites
,”
ASME Appl. Mech. Rev.
,
59
(
5
), pp.
249
268
.
72.
Sawada
,
K.
,
Nakazawa
,
T.
,
Kawamura
,
N.
,
Matsumoto
,
K.
,
Hiruta
,
Y.
, and
Sudo
,
T.
,
1994
, “
Simplified and Practical Estimation of Package Cracking During Reflow Soldering Process
,”
IEEE
International Reliability Physics Symposium
, San Jose, CA, Apr. 11–14, pp.
114
119
.
73.
Yi
,
S.
,
Goh
,
J. S.
, and
Yang
,
J. C.
,
1997
, “
Residual Stresses in Plastic IC Packages During Surface Mounting Process Preceded by Moisture Soaking Test
,”
IEEE Trans. Compon. Packag. Manuf. Technol., Part B
,
20
(3), pp.
247
255
.
74.
Liu
,
P.
,
Cheng
,
L.
, and
Zhang
,
Y. W.
,
2003
, “
Interface Delamination in Plastic IC Packages Induced by Thermal Loading and Vapor Pressure—A Micromechanics Model
,”
IEEE Trans. Adv. Packag.
,
26
(
1
), pp.
1
9
.
75.
Adamson
,
A. W.
,
1990
,
Physical Chemistry of Surfaces
,
5th ed.
,
Wiley
,
New York
.
76.
Tuller
,
M.
,
Or
,
D.
, and
Dudley
,
L. M.
,
1999
, “
Adsorption and Capillary Condensation in Porous Media: Liquid Retention and Interfacial Configurations in Angular Pores
,”
Water Resour. Res.
,
35
(
7
), pp.
1949
1964
.
77.
Hunter
,
R. J.
,
2001
,
Foundations of Colloid Science
,
Oxford University Press
,
Oxford, UK
.
78.
Soles
,
C. L.
,
Chang
,
F. T.
,
Gidley
,
D. W.
, and
Yee
,
A. F.
,
2000
, “
Contributions of the Nanovoid Structure to the Kinetics of Moisture Transport in Epoxy Resins
,”
J. Polym. Sci., Part B
,
38
(
5
), pp.
776
791
.
79.
Chen
,
L.
,
Chen
,
C. F.
, and
Lee
,
J. H.
,
2012
, “
On the Modeling of Surface Tension and Its Applications by the Generalized Interpolation Material Point Method
,”
CMES
,
86
(
3
), pp.
199
224
.
80.
Yu
,
Y.
,
Sun
,
D.
,
Wu
,
K.
,
Xu
,
Y.
,
Chen
,
H.
,
Zhang
,
X.
, and
Qiu
,
L.
,
2011
, “
CFD Study on Mean Flow Engine for Wind Power Exploitation
,”
Energy Convers. Manage.
,
52
(
6
), pp.
2355
2359
.
81.
Sun
,
D.
,
Xu
,
Y.
,
Chen
,
H.
,
Wu
,
K.
,
Liu
,
K.
, and
Yu
,
Y.
,
2012
, “
A Mean Flow Acoustic Engine Capable of Wind Energy Harvesting
,”
Energy Convers. Manage.
,
63
, pp.
101
105
.
82.
Sakamaki
,
R.
,
Sum
,
A. K.
,
Narumi
,
T.
, and
Yasuoka
,
K.
,
2011
, “
Molecular Dynamics Simulations of Vapor/Liquid Coexistence Using the Nonpolarizable Water Models
,”
J. Chem. Phys.
,
134
(
12
), p.
124708
.
83.
Guo
,
T. F.
, and
Cheng
,
L.
,
2002
, “
Modeling Vapor Pressure Effects on Void Rupture and Crack Growth Resistance
,”
Acta Mater.
,
50
(
13
), pp.
3487
3500
.
84.
Chew
,
H. B.
,
Guo
,
T. F.
, and
Cheng
,
L.
,
2004
, “
Vapor Pressure and Residual Stress Effects on the Toughness of Polymeric Adhesive Joints
,”
Eng. Fract. Mech.
,
71
(
16–17
), pp.
2435
2448
.
85.
Chong
,
C. W.
,
Guo
,
T. F.
, and
Cheng
,
L.
,
2004
, “
Vapor Pressure Assisted Crack Growth at Interfaces Under Mixed Mode Loading
,”
Comput. Mater. Sci.
,
30
(
3–4
), pp.
425
432
.
86.
Chew
,
H. B.
,
Guo
,
T. F.
, and
Cheng
,
L.
,
2005
, “
Vapor Pressure and Residual Stress Effects on Failure of an Adhesive Film
,”
Int. J. Solids Struct.
,
42
(
16–17
), pp.
4795
4810
.
87.
Guo
,
F. L.
,
He
,
B. B.
, and
Niu
,
X.
,
2015
, “
Analysis of Vapor Pressure and Void Volume Fraction Evolution in Porous Polymers: A Micromechanics Approach
,”
Int. J. Solids Struct.
,
66
, pp.
133
139
.
88.
Guo
,
F. L.
,
Niu
,
X.
, and
He
,
B. B.
,
2015
, “
An Analytical Study on Steam-Driven Delamination and Stability of Delamination Growth in Electronic Packages
,”
Eng. Fract. Mech.
,
144
, pp.
89
100
.
89.
Suhir
,
E.
,
1997
, “
Failure Criterion for Moisture-Sensitive Plastic Packages of Integrated Circuit (IC) Devices: Application of Von Kármán's Equations With Consideration of Thermoelastic Strains
,”
Int. J. Solids Struct.
,
34
(
23
), pp.
2991
3019
.
You do not currently have access to this content.