The success of any progressive failure analysis of composite structures is influenced by the failure criteria and the associated material property degradation models. The failure criteria are the conditions for the prediction of the occurrence of material damage. The degradation models are mathematical representations of the residual properties for each material damage state predicted by the failure criteria. A brief summary of the major classes of failure criteria pertaining to the degradation models is followed by a review of degradation models that have been developed for unidirectional polymer matrix composite laminates. The review is organized around the relationships of the various models to associated failure criteria as well as the various constitutive frameworks for finite element implementation. Models that invoke residual properties as a one-time sudden degradation of the original properties are described followed by models where the mathematical representation of at least one property invokes gradual property degradation as a function of some other evolving field variable.

1.
Sendeckyj
,
G. P.
, 1972, “
A Brief Survey of Empirical Multi-Axial Strength Criteria for Composites
,”
Composite Materials: Testing and Design (Second Conference)
,
American Society for Testing and Materials
,
Philadelphia
, ASTM STP 497, pp.
41
51
.
2.
Wu
,
E. M.
, “
Phenomenological Anisotropic Failure Criterion
,”
Mechanics of Composite Materials
(
Composite Materials Series
),
G. P.
Sendeckyj
, ed.,
Academic Press
,
New York and London
, Vol.
2
, pp.
353
431
.
3.
Soni
,
S. R.
, 1983, “
A New Look at Commonly Used Failure Theories in Composite Laminates
,”
Proceedings of the 24th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference
, Lake Tahoe, NV, May 2–4, pp.
171
175
.
4.
Soni
,
S. R.
, 1983, “
A Comparative Study of Failure Envelopes in Composite Laminates
,”
J. Reinf. Plast. Compos.
0731-6844,
2
(
1
), pp.
34
42
.
5.
Tsai
,
S. W.
, 1984, “
A Survey of Macroscopic Failure Criteria for Composite Materials
,”
J. Reinf. Plast. Compos.
0731-6844,
3
(
1
), pp.
40
62
.
6.
Rowlands
,
R. E.
, 1985, “
Strength (Failure) Theories and Their Experimental Correlation
,”
Handbook of Composites
,
G. C.
Sih
and
A. M.
Skudra
, eds.,
Elsevier Science
, pp.
71
125
.
7.
Nahas
,
M. N.
, 1986, “
Survey of Failure and Post-Failure Theories of Laminated Fiber-Reinforced Composites
,”
J. Compos. Technol. Res.
0884-6804,
8
(
4
), pp.
138
153
.
8.
Fan
,
W.
, 1987, “
On Phenomenological Anisotropic Failure Criteria
,”
Compos. Sci. Technol.
0266-3538,
28
(
4
), pp.
269
278
.
9.
Labossiere
,
P.
, and
Neale
,
K. W.
, 1987, “
Macroscopic Failure Criteria for Fibre-Reinforced Composite Materials
,”
SM Arch.
0376-7426,
12
(
2
), pp.
439
450
.
10.
Thom
,
H.
, 1998, “
A Review of the Biaxial Strength of Fibre-Reinforced Plastics
,”
Composites, Part A
1359-835X,
29
(
8
), pp.
869
886
.
11.
Federico
,
P.
, 2001, “
A Study of Failure Criteria of Fibrous Composite Materials
,” NASA/CR Report No. 2001-210661.
12.
Soden
,
P. D.
,
Hinton
,
M. J.
, and
Kaddour
,
A. S.
, 1998, “
A Comparison of Predictive Capabilities of Current Failure Theories for Composite Laminates
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1225
1254
.
13.
Hinton
,
M. J.
,
Kaddour
,
A. S.
, and
Soden
,
P. D.
, 2002, “
A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates, Judged Against Experimental Evidence
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1725
1797
.
14.
Kaddour
,
A. S.
,
Hinton
,
M. J.
, and
Soden
,
P. D.
, 2004, “
A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates: Additional Contributions
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
449
476
.
15.
Hinton
,
M. J.
,
Kaddour
,
A. S.
, and
Soden
,
P. D.
, 2004, “
A Further Assessment of the Predictive Capabilities of Current Failure Theories for Composite Laminates: Comparison With Experimental Evidence
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
549
588
.
16.
Icardi
,
U.
,
Locatto
,
S.
, and
Longo
,
A.
, 2007, “
Assessment of Recent Theories for Predicting Failures of Composite Laminates
,”
Appl. Mech. Rev.
0003-6900,
60
(
2
), pp.
76
86
.
17.
Hill
,
R.
, 1950,
Mathematical Theory of Plasticity
,
Clarendon
,
Oxford
, pp.
317
321
.
18.
Azzi
,
V. D.
, and
Tsai
,
S. W.
, 1965, “
Anisotropic Strength of Composites
,”
Exp. Mech.
0014-4851,
5
(
9
), pp.
283
288
.
19.
Hoffman
,
O.
, 1967, “
The Brittle Strength of Orthotropic Materials
,”
J. Compos. Mater.
0021-9983,
1
(
2
), pp.
200
206
.
20.
Chamis
,
C. C.
, 1969, “
Failure Criteria for Filamentary Composites
,”
Composite Materials: Testing and Design
,
American Society for Testing and Materials
,
Philadelphia
, ASTM STP 460, pp.
336
351
.
21.
Tsai
,
S. W.
, and
Wu
,
E. M.
, 1971, “
A General Theory of Strength for Anisotropic Materials
,”
J. Compos. Mater.
0021-9983,
5
(
1
), pp.
58
80
.
22.
Sandhu
,
R. S.
, 1976, “
Nonlinear Behavior of Unidirectional and Angle Ply Laminates
,”
J. Aircr.
0021-8669,
13
(
2
), pp.
104
111
.
23.
Hashin
,
Z.
, and
Rotem
,
A.
, 1973, “
A Fatigue Failure Criterion for Fiber Reinforced Materials
,”
J. Compos. Mater.
0021-9983,
7
(
4
), pp.
448
464
.
24.
Hashin
,
Z.
, 1980, “
Failure Criteria for Unidirectional Fiber Composites
,”
ASME J. Appl. Mech.
0021-8936,
47
(
2
), pp.
329
334
.
25.
Lee
,
J. D.
, 1982, “
Three-Dimensional Finite Element Analysis of Damage Accumulation in Composite Laminates
,”
Proceedings of the Second USA-USSR Symposium
, Bethlehem, PA, Mar. 9–12, pp.
291
306
.
26.
Christensen
,
R. M.
, 1997, “
Stress Based Yield/Failure Criteria for Fiber Composites
,”
Int. J. Solids Struct.
0020-7683,
34
(
5
), pp.
529
543
.
27.
Mayes
,
J. S.
, and
Hansen
,
A. C.
, 2001, “
A Multicontinuum Failure Analysis of Composite Structural Laminates
,”
Mech. Compos. Mater. Struct.
1075-9417,
8
(
4
), pp.
249
262
.
28.
Hahn
,
H. T.
, and
Williams
,
J. G.
, 1986, “
Compression Failure Mechanisms in Unidirectional Composites
,”
Composite Materials: Testing and Design
,
American Society for Testing and Materials
,
Philadelphia
, ASTM STP 893, pp.
115
139
.
29.
Eason
,
T. G.
, and
Ochoa
,
O. O.
, 1996, “
Modeling Progressive Damage in Composites: A Shear Deformable Element for ABAQUS
,”
Compos. Struct.
0263-8223,
34
(
2
), pp.
119
128
.
30.
Ye
,
L.
, 1988, “
Role of Matrix Resin in Delamination Onset and Growth in Composite Laminates
,”
Compos. Sci. Technol.
0266-3538,
33
(
4
), pp.
257
277
.
31.
Yamada
,
S. E.
, and
Sun
,
C. T.
, 1978, “
Analysis of Laminate Strength and Its Distribution
,”
J. Compos. Mater.
0021-9983,
12
(
3
), pp.
275
284
.
32.
Chang
,
F. K.
,
Scott
,
R. A.
, and
Springer
,
G. S.
, 1984, “
Failure Strength of Nonlinearly Elastic Composite Laminates Containing a Pin Loaded Hole
,”
J. Compos. Mater.
0021-9983,
18
(
5
), pp.
464
477
.
33.
Lessard
,
L. B.
, 1991, “
Bearing Failure of Composite Pinned Joints Using Progressive Damage Modeling
,”
Proceedings of the Eighth International Conference on Composite Materials
, Honolulu, HI, Jul. 15–19, pp.
9.E.1
9.E.10
.
34.
Griffin
,
O. H.
, Jr.
, 1982, “
Evaluation of Finite-Element Software Packages for Stress Analysis of Laminated Composites
,”
Compos. Technol. Rev.
,
4
(
4
), pp.
136
141
.
35.
Saarela
,
O.
, 1994, “
Computer Programs for Mechanical Analysis and Design of Polymer Matrix Components
,”
Prog. Polym. Sci.
0079-6700,
19
(
1
), pp.
171
301
.
36.
ABAQUS Inc.
, 2006, ABAQUS Version 6.6,
ABAQUS Inc.
, Providence, RI.
37.
Ochoa
,
O. O.
, and
Reddy
,
J. N.
, 1992,
Finite Element Analysis of Composite Laminates
,
Kluwer Academic
,
Boston
.
38.
Robbins
,
D. H.
, Jr.
, and
Reddy
,
J. N.
, 1993, “
Modelling of Thick Composites Using a Layer-Wise Laminate Theory
,”
Int. J. Numer. Methods Eng.
0029-5981,
36
(
4
), pp.
655
677
.
39.
Reddy
,
J. N.
, 1989, “
On Refined Computational Models of Composite Laminates
,”
Int. J. Numer. Methods Eng.
0029-5981,
27
(
2
), pp.
361
382
.
40.
Reddy
,
J. N.
, 1989, “
On the Generalization of Displacement-Based Laminate Theories
,”
Appl. Mech. Rev.
0003-6900,
42
(
11
), pp.
S213
S222
.
41.
Hyer
,
M. W.
, 1998,
Stress Analysis of Fiber-Reinforced Composite Materials
,
McGraw-Hill Science
,
New York
.
42.
Herakovich
,
C. T.
, 1998,
Mechanics of Fibrous Composites
,
Wiley
,
New York
.
43.
Jones
,
R. M.
, 1999,
Mechanics of Composite Materials
,
2nd ed.
,
Taylor & Francis
,
Philadelphia
.
44.
Chang
,
F. K.
, and
Chang
,
Y. K.
, 1987, “
A Progressive Damage Model for Laminated Composites Containing Stress Concentrations
,”
J. Compos. Mater.
0021-9983,
21
(
9
), pp.
834
855
.
45.
Chou
,
P. C.
,
Carleone
,
J.
, and
Hsu
,
C. M.
, 1972, “
Elastic Constants of Layered Media
,”
J. Compos. Mater.
0021-9983,
6
(
1
), pp.
80
93
.
46.
Sun
,
C. T.
, and
Li
,
S.
, 1988, “
Three-Dimensional Effective Elastic Constants for Thick Laminates
,”
J. Compos. Mater.
0021-9983,
22
(
7
), pp.
629
639
.
47.
Al-Khalil
,
M. F. S.
, and
Soden
,
P. D.
, 1994, “
Theoretical Through-Thickness Elastic Constants for Filament-Wound Tubes
,”
Int. J. Mech. Sci.
0020-7403,
36
(
1
), pp.
49
62
.
48.
Lempriere
,
B. M.
, 1968, “
Poisson’s Ratio in Orthotropic Materials
,”
AIAA J.
0001-1452,
6
(
11
), pp.
2226
2227
.
49.
Reddy
,
Y. S.
, and
Reddy
,
J. N.
, 1993, “
Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates Under Axial Extension
,”
J. Compos. Technol. Res.
0884-6804,
15
(
2
), pp.
73
87
.
50.
Vinson
,
J. R.
, and
Sierakowski
,
R. L.
, 1986,
The Behavior of Structures Composed of Composite Materials
(
Mechanics of Structural Systems
),
Kluwer Academic
,
Boston
, Vol
5
.
51.
Chen
,
W. H.
, and
Lee
,
S. S.
, 1995, “
Numerical and Experimental Failure Analysis of Composite Laminates With Bolted Joints Under Bending Loads
,”
J. Compos. Mater.
0021-9983,
29
(
1
), pp.
15
36
.
52.
Lee
,
J. D.
, 1982, “
Three Dimensional Finite Element Analysis of Damage Accumulation in Composite Laminate
,”
Comput. Struct.
0045-7949,
15
(
3
), pp.
335
350
.
53.
Lee
,
J. D.
, 1980, “
Three Dimensional Finite Element Analysis of Layered Fiber-Reinforced Composite Materials
,”
Comput. Struct.
0045-7949,
12
(
3
), pp.
319
339
.
54.
Labossiere
,
P.
,
Neale
,
K. W.
, and
Neglo
,
K.
, 1988, “
Damage Accumulation in Fibre-Reinforced Composite Laminates
,”
Trans. Can. Soc. Mech. Eng.
0315-8977,
12
(
3
), pp.
133
137
.
55.
Hwang
,
W. C.
, and
Sun
,
C. T.
, 1989, “
Failure Analysis of Laminated Composites by Using Iterative Three-Dimensional Finite Element Method
,”
Comput. Struct.
0045-7949,
33
(
1
), pp.
41
47
.
56.
Chang
,
F. K.
, and
Springer
,
G. S.
, 1986, “
The Strengths of Fiber Reinforced Composite Bends
,”
J. Compos. Mater.
0021-9983,
20
(
1
), pp.
30
45
.
57.
Nagesh
, 2003, “
Finite-Element Analysis of Pressure Vessels With Progressive Degradation
,”
Def. Sci. J.
0011-748X,
53
(
1
), pp.
75
86
.
58.
Tsau
,
L.-R.
, and
Plunkett
,
R.
, 1993, “
Finite Element Analysis of Progressive Failure for Laminated FRP Plates With Inplane Loading
,”
Eng. Fract. Mech.
0013-7944,
45
(
4
), pp.
529
546
.
59.
Tsau
,
L. R.
,
Chang
,
Y. H.
, and
Tsao
,
F. L.
, 1995, “
The Design of Optimal Stacking Sequence for Laminated FRP Plates With Inplane Loading
,”
Comput. Struct.
0045-7949,
55
(
4
), pp.
565
580
.
60.
Tsau
,
L. R.
, and
Liu
,
C. H.
, 1995, “
A Comparison Between Two Optimization Methods on the Stacking Sequence of Fiber-Reinforced Composite Laminate
,”
Comput. Struct.
0045-7949,
55
(
3
), pp.
515
525
.
61.
Tsai
,
S. W.
, 1986,
Composites Design
,
Think Composites
,
Dayton, OH
.
62.
Hu
,
F. Z.
,
Soutis
,
C.
, and
Edge
,
E. C.
, 1997, “
Interlaminar Stresses in Composite Laminates With a Circular Hole
,”
Compos. Struct.
0263-8223,
37
(
2
), pp.
223
232
.
63.
Pachajoa
,
M. E.
,
Frances
,
M. K.
, and
Lee
,
J. D.
, 1995, “
Stress and Failure Analysis of Composite Structures
,”
Eng. Fract. Mech.
0013-7944,
50
(
5–6
), pp.
883
902
.
64.
McCarthy
,
C. T.
,
McCarthy
,
M. A.
, and
Lawlor
,
V. P.
, 2005, “
Progressive Damage Analysis of Multi-Bolt Composite Joints With Variable Bolt-Hole Clearances,”
Composites, Part B
1359-8368,
36
(
4
), pp.
290
305
.
65.
Camanho
,
P. P.
, and
Matthews
,
F. L.
, 1999, “
A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates
,”
J. Compos. Mater.
0021-9983,
33
(
24
), pp.
2248
2280
.
66.
Nuismer
,
R. J.
, and
Tan
,
S. C.
, 1988, “
Constitutive Relations of a Cracked Composite Lamina
,”
J. Compos. Mater.
0021-9983,
22
(
4
), pp.
306
321
.
67.
Tan
,
S. C.
, and
Nuismer
,
R. J.
, 1989, “
A Theory for Progressive Matrix Cracking in Composite Laminates
,”
J. Compos. Mater.
0021-9983,
23
(
10
), pp.
1029
1047
.
68.
O’Higgins
,
R. M.
,
Padhi
,
G. S.
,
McCarthy
,
M. A.
, and
McCarthy
,
C. T.
, 2004, “
Experimental and Numerical Study of the Open-Hole Tensile Strength of Carbon/Epoxy Composites
,”
Mech. Compos. Mater.
0191-5665,
40
(
4
), pp.
269
278
.
69.
Gul Apalak
,
Z.
,
Kemal Apalak
,
M.
, and
Serdar Genc
,
M.
, 2007, “
Progressive Damage Modeling of an Adhesively Bonded Composite Single Lap Joint Under Flexural Loads at the Mesoscale Level
,”
J. Reinf. Plast. Compos.
0731-6844,
26
(
9
), pp.
903
953
.
70.
Kermanidis
,
Th.
,
Labeas
,
G.
,
Tserpes
,
K. I.
, and
Pantelakis
,
Sp.
, 2000, “
Finite Element Modeling of Damage Accumulation in Bolted Composite Joints Under Incremental Tensile Loading
,”
Proceedings of the Third ECCOMAS Congress
, Barcelona, Spain, Sept. 11–14.
71.
Tserpes
,
K. I.
,
Papanikos
,
P.
, and
Kermanidis
,
Th.
, 2001, “
A Three-Dimensional Progressive Damage Model for Bolted Joints in Composite Laminates Subjected to Tensile Loading
,”
Fatigue Fract. Eng. Mater. Struct.
8756-758X,
24
(
10
), pp.
663
675
.
72.
Shokrieh
,
M. M.
,
Lessard
,
L. B.
, and
Poon
,
C.
, 1996, “
Three-Dimensional Progressive Failure Analysis of Pin/Bolt Loaded Composite Laminates
,”
83rd Meeting of the AGARD SMP on Bolted Joints in Polymeric Composites
, Florence, Italy, Sept, 2–3, pp.
7.1
7.10
.
73.
Tserpes
,
K. I.
,
Labeas
,
G.
,
Papanikos
,
P.
, and
Kermanidis
,
Th.
, 2002, “
Strength Prediction of Bolted Joints in Graphite/Epoxy Composite Laminates
,”
Composites, Part B
1359-8368,
33
(
7
), pp.
521
529
.
74.
Ireman
,
T.
,
Ranvik
,
T.
, and
Eriksson
,
I.
, 2000, “
On Damage Development in Mechanically Fastened Composite Laminates
,”
Compos. Struct.
0263-8223,
49
(
2
), pp.
151
171
.
75.
Mayes
,
J. S.
, 1999, “
Multicontinuum Failure Analysis of Composite Structural Laminates
,” Ph.D. thesis, University of Wyoming, Laramie.
76.
Mayes
,
J. S.
, and
Hansen
,
A. C.
, 2004, “
Composite Laminate Failure Analysis Using Multicontinuum Theory
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
379
394
.
77.
Mayes
,
J. S.
, and
Hansen
,
A. C.
, 2004, “
A Comparison of Multicontinuum Theory Based Failure Simulation With Experimental Results
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
517
527
.
78.
Waszczak
,
J. P.
, and
Cruse
,
T. A.
, 1971, “
Failure Mode and Strength Predictions of Anisotropic Bolt Bearing Specimens
,”
J. Compos. Mater.
0021-9983,
5
(
3
), pp.
421
425
.
79.
Sciuva
,
M. D.
,
Icardi
,
U.
, and
Villani
,
M.
, 1998, “
Failure Analysis of Composite Laminates Under Large Deflection
,”
Compos. Struct.
0263-8223,
40
(
3–4
), pp.
239
255
.
80.
Pal
,
P.
, and
Ray
,
C.
, 2002, “
Progressive Failure Analysis of Laminated Composite Plates by Finite Element Method
,”
J. Reinf. Plast. Compos.
0731-6844,
21
(
16
), pp.
1505
1513
.
81.
Prusty
,
B. G.
, 2005, “
Progressive Failure Analysis of Laminated Unstiffened and Stiffened Composite Panels
,”
J. Reinf. Plast. Compos.
0731-6844,
24
(
6
), pp.
633
642
.
82.
Lee
,
Y. J.
, and
Chen
,
W. H.
, 1988, “
Failure Process and Bolted Joint Strength of Composite Laminates
,”
J. Chin. Soc. Mech. Eng.
0257-9731,
9
(
3
), pp.
169
182
.
83.
Chen
,
W. H.
, and
Lee
,
Y. J.
, 1990, “
The Effects of Clearance and Pin Elasticity on the Bearing Strength of Composite Laminates
,”
J. Chin. Soc. Mech. Eng.
0257-9731,
11
(
2
), pp.
147
157
.
84.
Kim
,
Z. G.
,
Hong
,
C. S.
, and
Kim
,
C. G.
, 1995, “
Postbuckling Analysis of Stringer Stiffened Composite Laminated Cylindrical Panels
,”
J. Reinf. Plast. Compos.
0731-6844,
14
(
8
), pp.
827
846
.
85.
Kong
,
C. W.
,
Lee
,
I. C.
,
Kim
,
C. G.
, and
Hong
,
C. S.
, 1998, “
Postbuckling and Failure of Stiffened Composite Panels Under Axial Compression
,”
Compos. Struct.
0263-8223,
42
(
1
), pp.
13
21
.
86.
Kong
,
C. W.
,
Hong
,
C. S.
, and
Kim
,
C. G.
, 2001, “
Postbuckling Strength of Composite Plate With a Hole
,”
J. Reinf. Plast. Compos.
0731-6844,
20
(
6
), pp.
466
481
.
87.
Hyer
,
M. W.
,
Wolford
,
G. F.
, and
Knight
,
N. F.
, Jr.
, 2003, “
Damage Initiation and Progression in Internally Pressurized Noncircular Composite Cylinders
,”
Proceedings of the 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference
, Norfolk, VA, Apr. l7–10, pp.
1702
1712
.
88.
Chen
,
J. K.
,
Sun
,
C. T.
, and
Chang
,
C. I.
, 1985, “
Failure Analysis of a Graphite/Epoxy Laminate Subjected to Combined Thermal and Mechanical Loading
,”
J. Compos. Mater.
0021-9983,
19
(
5
), pp.
408
423
.
89.
Gummadi
,
L. N. B.
, and
Palazotto
,
A. N.
, 1998, “
Progressive Failure Analysis of Composite Cylindrical Shells Considering Large Rotations
,”
Composites, Part B
1359-8368,
29
(
5
), pp.
547
563
.
90.
Kweon
,
J. H.
,
Hong
,
C. S.
, and
Lee
,
I. C.
, 1995, “
Postbuckling Compressive Strength of Graphite/Epoxy Laminated Cylindrical Panels Loaded in Compression
,”
AIAA J.
0001-1452,
33
(
2
), pp.
217
222
.
91.
Kweon
,
J. H.
, 1998, “
Post-Failure Analysis of Composite Cylindrical Panels Under Compression
,”
J. Reinf. Plast. Compos.
0731-6844,
17
(
18
), pp.
1665
1681
.
92.
Kweon
,
J. H.
, 2002, “
Crippling Analysis of Composite Stringers Based on Complete Unloading Method
,”
Comput. Struct.
0045-7949,
80
(
27–30
), pp.
2167
2175
.
93.
Lee
,
I. C.
,
Kim
,
C. G.
, and
Hong
,
C. S.
, 1997, “
Buckling and Postbuckling Behavior of Stiffened Composite Panels Loaded in Compression
,”
AIAA J.
0001-1452,
35
(
1
), pp.
202
204
.
94.
Sun
,
X. K.
,
Du
,
S. Y.
, and
Wang
,
G. D.
, 1999, “
Bursting Problem of Filament Wound Composite Pressure Vessels
,”
Int. J. Pressure Vessels Piping
0308-0161,
76
(
1
), pp.
55
59
.
95.
Wang
,
J.
,
Callus
,
P. J.
, and
Bannister
,
M. K.
, 2004, “
Experimental and Numerical Investigation of the Tension and Compression Strength of Un-Notched and Notched Quasi-Isotropic Laminates
,”
Compos. Struct.
0263-8223,
64
(
3–4
), pp.
297
306
.
96.
Kam
,
T. Y.
,
Sher
,
H. F.
,
Chao
,
T. N.
, and
Chang
,
R. R.
, 1996, “
Predictions of Deflection and First-Ply Failure Load of Thin Laminated Composite Plates Via the Finite Element Approach
,”
Int. J. Solids Struct.
0020-7683,
33
(
3
), pp.
375
398
.
97.
Sandhu
,
R. S.
,
Sendeckyj
,
G. P.
, and
Gallo
,
R. L.
, 1983, “
Modeling of the Failure Process in Notched Laminates
,”
Proceedings of IUTAM Symposium
, Blacksburg, VA, pp.
179
189
.
98.
Griffis
,
C. A.
,
Nemes
,
J. A.
,
Stonesifer
,
F. R.
, and
Chang
,
C. I.
, 1986, “
Degradation in Strength of Laminated Composites Subjected to Intense Heating and Mechanical Loading
,”
J. Compos. Mater.
0021-9983,
20
(
3
), pp.
216
235
.
99.
Engelstad
,
S. P.
,
Reddy
,
J. N.
, and
Knight
,
N. F.
, Jr.
, 1992, “
Postbuckling Response and Failure Prediction of Graphite-Epoxy Plates Loaded in Compression
,”
AIAA J.
0001-1452,
30
(
8
), pp.
2106
2113
.
100.
Singh
,
S. B.
, and
Kumar
,
A.
, 1998, “
Postbuckling Response and Failure of Symmetric Laminates Under In-Plane Shear
,”
Compos. Sci. Technol.
0266-3538,
58
(
12
), pp.
1949
1960
.
101.
Singh
,
S. B.
, and
Kumar
,
A.
, 1999, “
Postbuckling Response and Strength of Laminates Under Combined In-Plane Loads
,”
Compos. Sci. Technol.
0266-3538,
59
(
5
), pp.
727
736
.
102.
Ganesan
,
R.
, and
Zhang
,
D.
, 2004, “
Progressive Failure Analysis of Composite Laminates Subjected to In-Plane Compressive and Shear Loadings
,”
Sci. Eng. Compos. Mater.
,
11
(
2–3
), pp.
79
102
.
103.
Pandey
,
A. K.
, and
Reddy
,
J. N.
, 1987, “
A Post First-Ply Failure Analysis of Composite Laminates
,”
Proceedings of the 28th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference
, Monterey, CA, Apr. 6–8, pp.
788
797
.
104.
Gotsis
,
P. K.
,
Chamis
,
C. C.
, and
Minnetyan
,
L.
, 1998, “
Prediction of Composite Laminate Fracture, Micromechanics and Progressive Fracture
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1137
1149
.
105.
Gotsis
,
P. K.
,
Chamis
,
C. C.
, and
Minnetyan
,
L.
, 2002, “
Application of Progressive Fracture Analysis for Predicting Failure Envelopes and Stress-Strain Behaviors of Composite Laminates: A Comparison With Experimental Results
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1545
1559
.
106.
Minnetyan
,
L.
,
Chamis
,
C. C.
, and
Murthy
,
P. L. N.
, 1992, “
Structural Durability of a Composite Pressure Vessel
,”
J. Reinf. Plast. Compos.
0731-6844,
11
(
11
), pp.
1251
1269
.
107.
Gotsis
,
P. K.
,
Chamis
,
C. C.
, and
Minnetyan
,
L.
, 1996, “
Computational Simulation of Damage Progression of Composite Thin Shells Subjected to Mechanical Loads
,”
Theor. Appl. Fract. Mech.
0167-8442,
25
(
3
), pp.
211
224
.
108.
Gotsis
,
P. K.
,
Chamis
,
C. C.
, and
Minnetyan
,
L.
, 1997, “
Progressive Fracture of Fiber Composite Build-Up Structures
,”
J. Reinf. Plast. Compos.
0731-6844,
16
(
2
), pp.
182
198
.
109.
Minnetyan
,
L.
, and
Chamis
,
C. C.
, 1997, “
Progressive Fracture of Composite Cylindrical Shells Subjected to External Pressure
,”
J. Compos. Technol. Res.
0884-6804,
19
(
2
), pp.
65
71
.
110.
Minnetyan
,
L.
,
Rivers
,
J. M.
,
Chamis
,
C. C.
, and
Murthy
,
P. L. N.
, 1995, “
Discontinuously Stiffened Composite Panel Under Compressive Loading
,”
J. Reinf. Plast. Compos.
0731-6844,
14
(
1
), pp.
85
98
.
111.
Chamis
,
C. C.
,
Gotsis
,
P. K.
, and
Minnetyan
,
L.
, 1996, “
Damage Tolerance of Composite Pressurized Shells
,”
Proceedings of the 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibit
, Salt Lake City, UT, Apr. 15–17, pp.
2112
2121
.
112.
Chamis
,
C. C.
,
Gotsis
,
P. K.
, and
Minnetyan
,
L.
, 1998, “
Progressive Fracture and Damage Tolerance of Composite Pressure Vessels
,”
J. Adv. Mater.
1070-9789,
30
(
1
), pp.
22
26
.
113.
Huang
,
D.
, and
Minnetyan
,
L.
, 1998, “
Damage Progression in Carbon-Fiber Reinforced Plastic I-Beams
,”
J. Compos. Constr.
1090-0268,
2
(
1
), pp.
38
45
.
114.
Huang
,
D.
, and
Minnetyan
,
L.
, 2001, “
Progressive Fracture of Stitched Stiffened Composite Shear Panels in the Postbuckling Range
,”
J. Reinf. Plast. Compos.
0731-6844,
20
(
18
), pp.
1617
1632
.
115.
Averill
,
R. C.
, 1992, “
A Micromechanics-Based Progressive Failure Model for Laminated Composite Structures
,”
Proceedings of the 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibit
, Dallas, TX, Apr. 13–15, pp.
2898
2904
.
116.
Kim
,
Y.
,
Davalos
,
J. F.
, and
Barbero
,
E. J.
, 1996, “
Progressive Failure Analysis of Laminated Composite Beams
,”
J. Compos. Mater.
0021-9983,
30
(
5
), pp.
536
560
.
117.
Davalos
,
J. F.
, and
Kim
,
Y.
, 1996, “
A Layer-Wise Formulation for Progressive Failure Analysis of Laminated Composite Beams
,”
Proceedings of the Fourth Materials Engineering Conference
, Washington, DC, Nov. 10–14, pp.
1150
1159
.
118.
Greif
,
R.
, and
Chapon
,
E.
, 1993, “
Investigation of Successive Failure Modes in Graphite/Epoxy Laminated Composite Beams
,”
J. Reinf. Plast. Compos.
0731-6844,
12
(
5
), pp.
602
621
.
119.
Yang
,
L.
, 1988, “
Reliability of Composite Laminates
,”
Mech. Struct. Mach.
0890-5452,
16
(
4
), pp.
523
536
.
120.
Zhao
,
H.
, and
Zhanjun
,
G.
, 1995, “
Reliability Analysis of Composite Laminates by Enumerating Significant Failure Modes
,”
J. Compos. Mater.
0021-9983,
14
(
5
), pp.
427
444
.
121.
Thomas
,
D. J.
, and
Wetherhold
,
R. C.
, 1991, “
Reliability Analysis of Composite Laminates With Load Sharing
,”
J. Compos. Mater.
0021-9983,
25
(
11
), pp.
1459
1475
.
122.
Max Yen
,
S. C.
,
Chu
,
T. C.
,
Teh
,
K. T.
,
Wright
,
M. A.
, and
Stumpff
,
P.
, 1994, “
Diagnosis of the Subsequent Failure Mechanisms of Composite Laminates
,”
Int. J. Offshore Polar Eng.
1053-5381,
4
(
3
), pp.
248
256
.
123.
Kang
,
T. J.
,
Cho
,
Y. J.
,
Youn
,
J. R.
,
Chung
,
K.
, and
Lee
,
K. W.
, 2001, “
Prediction of the Ultimate Strength of Composite Laminates Under In-Plane Loading Using a Probabilistic Approach
,”
Polym. Polym. Compos.
0967-3911,
9
(
5
), pp.
339
343
.
124.
Tsai
,
S. W.
, and
Azzi
,
V. D.
, 1966, “
Strength of Laminated Composite Materials
,”
AIAA J.
0001-1452,
4
(
2
), pp.
296
301
.
125.
Chiu
,
K. D.
, 1969, “
Ultimate Strengths of Laminated Composites
,”
J. Compos. Mater.
0021-9983,
3
(
3
), pp.
578
582
.
126.
Chou
,
S. C.
,
Orringer
,
O.
, and
Rainey
,
J. H.
, 1976, “
Post-Failure Behavior of Laminates —I. No Stress Concentrations
,”
J. Compos. Mater.
0021-9983,
10
(
4
), pp.
371
381
.
127.
Eckold
,
G. C.
,
Leadbetter
,
D.
,
Soden
,
P. D.
, and
Griggs
,
P. R.
, 1978, “
Lamination Theory in Prediction of Failure Envelopes for Filament Wound Materials Subjected to Biaxial Loading
,”
Composites
0010-4361,
9
(
4
), pp.
243
246
.
128.
Kaddour
,
A. S.
,
Soden
,
P. D.
, and
Hinton
,
M. J.
, 1998, “
Failure of ±55 Degree Filament Wound Glass/Epoxy Composite Tubes Under Biaxial Compression
,”
J. Compos. Mater.
0021-9983,
32
(
18
), pp.
1618
1645
.
129.
Hinton
,
M. J.
,
Soden
,
P. D.
, and
Kaddour
,
A. S.
, 1996, “
Strength of Composite Laminates Under Biaxial Loads
,”
Appl. Compos. Mater.
0929-189X,
3
(
3
), pp.
151
162
.
130.
Schneider
,
W.
, and
Bardenheier
,
R.
, 1975, “
Versagenskriterien fur Kunstsoffe, Teil II: Experimentelle Ergebnisse
,”
J. Mater. Technol.
,
6
, pp.
339
348
.
131.
Huang
,
Z. M.
, 2004, “
A Bridging Model Prediction of the Ultimate Strength of Composite Laminates Subjected to Biaxial Loads
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
395
448
.
132.
Huang
,
Z. M.
, 2004, “
Correlation of the Bridging Model Predictions of the Biaxial Failure Strengths of Fibrous Laminates With Experiments
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
529
548
.
133.
Huang
,
Z. M.
, 2000, “
A Unified Micromechanical Model for the Mechanical Properties of Two Constituent Composite Materials. Part V: Laminate Strength
,”
J. Thermoplast. Compos.
,
13
(
3
), pp.
190
206
.
134.
Huang
,
Z. M.
, 2004, “
Ultimate Strength of a Composite Cylinder Subjected to Three-Point Bending: Correlation of Beam Theory With Experiment
,”
Compos. Struct.
0263-8223,
63
(
3–4
), pp.
439
445
.
135.
Huang
,
Z. M.
, 2004, “
Flexural Strength of a Composite Cylinder Incorporated With Thermal Residual Stresses
,”
Mater. Sci. Eng., A
0921-5093,
366
(
2
), pp.
367
380
.
136.
Hinton
,
M. J.
, 1998, “
Predicting Failure in Composite Laminates: The Background to the Exercise
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1001
1010
.
137.
Soden
,
P. D.
,
Hinton
,
M. J.
, and
Kaddour
,
A. S.
, 1998, “
Lamina Properties, Lay-Up Configurations and Loading Conditions for a Range of Fibre-Reinforced Composite Laminates
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1011
1022
.
138.
Hinton
,
M. J.
,
Kaddour
,
A. S.
, and
Soden
,
P. D.
, 2002, “
Evaluation of Failure Prediction in Composite Laminates: Background to ‘Part B’ of the Exercise
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1481
1488
.
139.
Soden
,
P. D.
,
Hinton
,
M. J.
, and
Kaddour
,
A. S.
, 2002, “
Biaxial Test Results for Strength and Deformation for a Range of E-Glass and Fibre Reinforced Composite Laminates: Failure Exercise Benchmark Data
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1489
1514
.
140.
Hinton
,
M. J.
,
Kaddour
,
A. S.
, and
Soden
,
P. D.
, 2004, “
Evaluation of Failure Prediction in Composite Laminates: Background to ‘Part C’ of the Exercise
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
321
327
.
141.
Soden
,
P. D.
,
Kaddour
,
A. S.
, and
Hinton
,
M. J.
, 2004, “
Recommendations for Designers and Researchers Resulting From the World-Wide Failure Exercise
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
589
604
.
142.
Harik
,
V. M.
, 2001, “
Optimization of Structural Designs for a Safe Failure Pattern: Layered Material Systems
,”
Mater. Des.
0264-1275,
22
(
4
), pp.
317
324
.
143.
Bogetti
,
T. A.
,
Hoppel
,
C. P. R.
,
Harik
,
V. M.
,
Newill
,
J. F.
, and
Burns
,
B. P.
, 2004, “
Predicting the Nonlinear Response and Progressive Failure of Composite Laminates
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
329
342
.
144.
Bogetti
,
T. A.
,
Christopher
,
P. R. H.
,
Harik
,
V. M.
,
Newill
,
J. F.
, and
Burns
,
P. B.
, 2004, “
Predicting the Nonlinear Response and Failure of Composite Laminates: Correlation With Experimental Evidence
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
477
485
.
145.
Liu
,
K.
, and
Tsai
,
S. W.
, 1998, “
A Progressive Quadratic Failure Criterion for a Laminate
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1023
1032
.
146.
Kuraishi
,
A.
,
Tsai
,
S. W.
, and
Liu
,
K. S.
, 2002, “
A Progressive Quadratic Failure Criterion, Part B
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1683
1695
.
147.
Wolfe
,
W. E.
, and
Butalia
,
T. S.
, 1998, “
A Strain-Energy Based Failure Criterion for Non-Linear Analysis of Composite Laminates Subjected to Biaxial Loading
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1107
1124
.
148.
Liu
,
X.
, and
Mahadevan
,
S.
, 2000, “
Ultimate Strength Failure Probability Estimation of Composite Structures
,”
J. Reinf. Plast. Compos.
0731-6844,
19
(
5
), pp.
403
426
.
149.
Mahadevan
,
S.
, and
Liu
,
X.
, 2002, “
Probabilistic Analysis of Composite Structure Ultimate Strength
,”
AIAA J.
0001-1452,
40
(
7
), pp.
1408
1414
.
150.
Sluimer
,
G. M.
, 1998, “
Ultimate Performance of GRP-Laminates Under In-Plane Biaxial Loading
,”
Heron
0046-7316,
43
(
4
), pp.
199
225
.
151.
Puck
,
A.
, 1965, “
Zum Deformationsverhalten und Bruchmechanismus von Glasfaser/Kunstoff
,”
Kunststoffe
0023-5563,
55
, p.
913
.
152.
Tan
,
S. C.
, 1991, “
A Progressive Failure Model for Composite Laminates Containing Openings
,”
J. Compos. Mater.
0021-9983,
25
(
5
), pp.
556
577
.
153.
Tan
,
S. C.
, and
Perez
,
J.
, 1993, “
Progressive Failure of Laminated Composites With a Hole Under Compressive Loading
,”
J. Reinf. Plast. Compos.
0731-6844,
12
(
10
), pp.
1043
1057
.
154.
Kwon
,
Y. W.
, and
Berner
,
J. M.
, 1995, “
Micromechanics Model for Damage and Failure Analysis of Laminated Fibrous Composites
,”
Eng. Fract. Mech.
0013-7944,
52
(
2
), pp.
231
242
.
155.
Davila
,
C. G.
,
Ambur
,
D. R.
, and
McGowan
,
D. M.
, 2000, “
Analytical Prediction of Damage Growth in Notched Composite Panels Loaded in Compression
,”
J. Aircr.
0021-8669,
37
(
5
), pp.
898
905
.
156.
Ambur
,
D. R.
,
Jaunky
,
N.
, and
Hilburger
,
M. W.
, 2004, “
Progressive Failure Studies of Stiffened Panels Subjected to Shear Loading
,”
Compos. Struct.
0263-8223,
65
(
2
), pp.
129
142
.
157.
Ambur
,
D. R.
,
Jaunky
,
N.
,
Hillburger
,
M. W.
, and
Davila
,
C. G.
, 2004, “
Progressive Failure Analyses of Compression-Loaded Composite Curved Panels With and Without Cutouts
,”
Compos. Struct.
0263-8223,
65
(
2
), pp.
143
155
.
158.
Xiao
,
Y.
, and
Ishikawa
,
T.
, 2002, “
Bearing Failure in Bolted Composite Joints: Analytical Tools Development
,”
Adv. Compos. Mater.
,
11
(
4
), pp.
375
391
.
159.
Xiao
,
Y.
, and
Ishikawa
,
T.
, 2005, “
Bearing Strength and Failure Behavior of Bolted Composite Joints, Part II: Modeling and Simulation
,”
Compos. Sci. Technol.
0266-3538,
65
(
7–8
), pp.
1032
1043
.
160.
Kim
,
S. J.
,
Hwang
,
J. S.
, and
Kim
,
J. H.
, 1998, “
Progressive Failure Analysis of Pin-Loaded Laminated Composites Using Penalty Finite Element Method
,”
AIAA J.
0001-1452,
36
(
1
), pp.
75
80
.
161.
Feih
,
S.
, and
Shercliff
,
H. R.
, 2005, “
Composite Failure Prediction of Single-L Joint Under Bending
,”
Composites, Part A
1359-835X,
36
(
3
), pp.
381
395
.
162.
Feih
,
S.
, and
Shercliff
,
H. R.
, 2005, “
Quality Assessment of Curved Composite Components in Peel Joint Structures
,”
Composites, Part A
1359-835X,
36
(
3
), pp.
397
408
.
163.
Chang
,
F. K.
,
Lessard
,
L. B.
, and
Tang
,
J. M.
, 1988, “
Compression Response of Laminated Composites Containing an Open Hole
,”
SAMPE Q.
0036-0821,
19
(
4
), pp.
46
51
.
164.
Chang
,
F. K.
, and
Lessard
,
L. B.
, 1991, “
Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Compressive Loadings: Part I — Analysis
,”
J. Compos. Mater.
0021-9983,
25
(
1
), pp.
2
43
.
165.
Xie
,
D.
, and
Biggers
,
S. B.
, Jr.
, 2003, “
Postbuckling Analysis With Progressive Damage Modeling in Tailored Laminated Plates and Shells With a Cutout
,”
Compos. Struct.
0263-8223,
59
(
2
), pp.
199
216
.
166.
Lessard
,
L. B.
, and
Shokrieh
,
M. M.
, 1995, “
Two-Dimensional Modeling of Composite Pinned-Joint Failure
,”
J. Compos. Mater.
0021-9983,
29
(
5
), pp.
671
697
.
167.
Zarco-Gonzalez
,
J. C.
,
Fellows
,
N. A.
, and
Durodola
,
J. F.
, 2004, “
A Step-Size Independent Method for Finite Element Modeling of Damage in Composites
,”
Compos. Sci. Technol.
0266-3538,
64
(
10–11
), pp.
1679
1689
.
168.
Okutan
,
B.
, 2002, “
The Effects of Geometric Parameters on the Failure Strength for Pin-Loaded Multi-Directional Fiber-Glass Reinforced Epoxy Laminate
,”
Composites, Part B
1359-8368,
33
(
8
), pp.
567
578
.
169.
Okutan
,
B.
, and
Karakuzu
,
R.
, 2002, “
The Failure Strength for Pin-Loaded Multi-Directional Fiber-Glass Reinforced Epoxy Laminate
,”
J. Compos. Mater.
0021-9983,
36
(
24
), pp.
2695
2712
.
170.
Okutan
,
B.
, and
Karakuzu
,
R.
, 2003, “
The Strength of Pinned Joints in Laminated Composites
,”
Compos. Sci. Technol.
0266-3538,
63
(
6
), pp.
893
905
.
171.
Kang
,
T. J.
, and
Lee
,
K. W.
, 1997, “
Strength Prediction for Mechanical Joints in Laminated Composite Plate Using Progressive Failure Analysis
,”
Polym. Polym. Compos.
0967-3911,
5
(
5
), pp.
343
351
.
172.
Lee
,
K. W.
, and
Kang
,
T. J.
, 2000, “
Strength Prediction of Mechanical Joints in Laminated Composite Plates
,”
Key Eng. Mater.
1013-9826,
183–187
, pp.
1165
1170
.
173.
Dano
,
M. L.
,
Gendron
,
G.
, and
Picard
,
A.
, 2000, “
Stress and Failure Analysis of Mechanically Fastened Joints in Composite Laminates
,”
Compos. Struct.
0263-8223,
50
(
3
), pp.
287
296
.
174.
Padhi
,
G. S.
,
Shenoi
,
R. A.
,
Moy
,
S. S. J.
, and
Hawkins
,
G. L.
, 1998, “
Progressive Failure and Ultimate Collapse of Laminated Composite Plates in Bending
,”
Compos. Struct.
0263-8223,
40
(
3/4
), pp.
277
291
.
175.
Kress
,
G.
,
Siau
,
M.
, and
Ermanni
,
P.
, 2005, “
Iterative Solution Methods for Damage Progression Analysis
,”
Compos. Struct.
0263-8223,
69
(
1
), pp.
21
33
.
176.
Tolson
,
S.
, and
Zabaras
,
N.
, 1991, “
Finite Element Analysis of Progressive Failure in Laminated Composite Plates
,”
Comput. Struct.
0045-7949,
38
(
3
), pp.
361
376
.
177.
Spottswood
,
S. M.
, and
Palazotto
,
A. N.
, 2001, “
Progressive Failure Analysis of a Composite Shell
,”
Compos. Struct.
0263-8223,
53
(
1
), pp.
117
131
.
178.
Ochoa
,
O. O.
, and
Engblom
,
J. J.
, 1987, “
Analysis of Progressive Failure in Composites
,”
Compos. Sci. Technol.
0266-3538,
28
(
2
), pp.
87
102
.
179.
Engblom
,
J. J.
, and
Ochoa
,
O. O.
, 1986, “
Finite Element Formulation Including Interlaminar Stress Calculations
,”
Comput. Struct.
0045-7949,
23
(
2
), pp.
241
249
.
180.
Greszczuk
,
L. B.
, 1975, “
Microbuckling Failure of Circular Fiber-Reinforced Composites
,”
AIAA J.
0001-1452,
13
(
10
), pp.
1311
1318
.
181.
Singh
,
S. B.
,
Kumar
,
A.
, and
Iyengar
,
N. G. R.
, 1997, “
Progressive Failure of Symmetrically Laminated Plates Under Uni-Axial Compression
,”
Struct. Eng. Mech.
1225-4568,
5
(
4
), pp.
433
450
.
182.
Singh
,
S. B.
,
Kumar
,
A.
, and
Iyengar
,
N. G. R.
, 1998, “
Progressive Failure of Symmetric Laminates Under In-Plane Shear: I—Positive Shear
,”
Struct. Eng. Mech.
1225-4568,
6
(
2
), pp.
143
159
.
183.
Singh
,
S. B.
,
Kumar
,
A.
, and
Iyengar
,
N. G. R.
, 1998, “
Progressive Failure of Symmetric Laminates Under In-Plane Shear: II—Negative Shear
,”
Struct. Eng. Mech.
1225-4568,
6
(
7
), pp.
757
772
.
184.
Sleight
,
D. W.
, 1999, “
Progressive Failure Analysis Methodology for Laminated Composite Structures
,” NASA/TP Report No. 1999-209107.
185.
Sleight
,
D. W.
,
Knight
,
N. F.
, Jr.
, and
Wang
,
J. T.
, 1997, “
Evaluation of a Progressive Damage Methodology for Laminated Composite Structures
,”
Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
, Kissimmee, FL, Apr. 7–10, pp.
2257
2272
.
186.
Sleight
,
D. W.
, and
Lotts
,
C. G.
, 2002, “
Application of Interface Technology in Progressive Failure Analysis of Composite Panels
,”
Proceedings of the 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
, Denver, CO, Apr. 22–25, pp.
1915
1924
.
187.
Wang
,
J. T.
,
Lotts
,
C. G.
, and
Sleight
,
D. W.
, 1999, “
Analysis of Discrete-Source Damage Progression in a Tensile Stiffened Composite Panel
,”
Proceedings of the 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
, St. Louis, MO, Apr. 12–15, pp.
1174
1187
.
188.
Hyer
,
M. W.
, and
Wolford
,
G. F.
, 2002, “
Microcrack Progression in Internally Pressurized Elliptical Cylinders
,”
Proceedings of the 17th Annual Technical Conference of the American Society for Composites
, Boca Raton, FL.
189.
Hyer
,
M. W.
, and
Wolford
,
G. F.
, 2002, “
Progressive Failure Analysis of Internally Pressurized Noncircular Composite Cylinders
,”
Proceedings of the 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
, Denver, CO, Apr. 22–25, pp.
1522
1532
.
190.
Knight
,
N. F.
, Jr.
,
Rankin
,
C. C.
, and
Brogan
,
F. A.
, 2002, “
STAGS Computational Procedure for Progressive Failure Analysis of Laminated Composite Structures
,”
Int. J. Non-Linear Mech.
0020-7462,
37
(
4–5
), pp.
833
849
.
191.
Mahadevan
,
S.
,
Liu
,
X.
, and
Xiao
,
Q.
, 1997, “
A Probabilistic Progressive Failure Model of Composite Laminates
,”
J. Reinf. Plast. Compos.
0731-6844,
16
(
11
), pp.
1020
1038
.
192.
Liu
,
X.
, and
Mahadevan
,
S.
, 1997, “
System Reliability of Composite Laminates
,”
Proceedings of the 38th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference
, Kissimmee, FL, Apr. 7–10, pp.
2877
2884
.
193.
Chen
,
J.
,
Wang
,
X.
, and
Luo
,
C.
, 2002, “
Reliability Analysis of FRP Laminates Plates With Consideration of Both Initial Imperfection and Failure Sequence
,”
Acta. Mech. Solida. Sin.
,
15
(
3
), pp.
227
235
.
194.
Mazzeranghi
,
A.
, and
Vanghi
,
D.
, 1994, “
A Post-Failure Model for Composite Laminates Based on Phenomenologic Aspects of Damage
,”
Compos. Struct.
0263-8223,
28
, pp.
323
332
.
195.
Reddy
,
Y. S. N.
,
Moorthy
,
C. M. D.
, and
Reddy
,
J. N.
, 1995, “
Non-Linear Progressive Failure Analysis of Laminated Composite Plates
,”
Int. J. Non-Linear Mech.
0020-7462,
30
(
5
), pp.
629
649
.
196.
Chang
,
F. K.
, and
Kutlu
,
Z.
, 1989, “
Strength and Response of Cylindrical Composite Shells Subjected to Out-of-Plane Loadings
,”
J. Compos. Mater.
0021-9983,
23
(
1
), pp.
11
31
.
197.
Chang
,
F. K.
, and
Kutlu
,
Z.
, 1990, “
Study on the Crushing Response of Cylindrical Composite Shells Subjected to Transverse Loading
,”
J. Compos. Technol. Res.
0884-6804,
12
(
4
), pp.
239
244
.
198.
Tsai
,
S. W.
, and
Hahn
,
H. T.
, 1980,
Introduction to Composite Materials
,
Technomic
,
Westport, CT
.
199.
Chang
,
F. K.
, and
Chang
,
K. Y.
, 1987, “
Post-Failure Analysis of Bolted Composite Joints in Tension or Shear-Out Mode Failure
,”
J. Compos. Mater.
0021-9983,
21
(
9
), pp.
809
833
.
200.
Joo
,
S. G.
,
Hong
,
C. S.
, and
Kim
,
C. G.
, 2001, “
Free Edge Effect on the Post Failure Behavior of Composite Laminates Under Tensile Loading
,”
J. Reinf. Plast. Compos.
0731-6844,
20
(
3
), pp.
191
221
.
201.
Joo
,
S. G.
, and
Hong
,
C. S.
, 2000, “
Progressive Failure Analysis of Composite Laminates Using 3-D Finite Element Method
,”
Key Eng. Mater.
1013-9826,
183–187
, pp.
535
540
.
202.
Sun
,
H. T.
,
Chang
,
F. K.
, and
Qing
,
X.
, 2002, “
The Response of Composite Joints With Bolt-Clamping Loads, Part I: Model Development
,”
J. Compos. Mater.
0021-9983,
36
(
1
), pp.
47
67
.
203.
Sun
,
H. T.
,
Chang
,
F. K.
, and
Qing
,
X.
, 2002, “
The Response of Composite Joints With Bolt-Clamping Loads, Part II: Model Verification
,”
J. Compos. Mater.
0021-9983,
36
(
1
), pp.
69
92
.
204.
Qing
,
X.
,
Sun
,
H. T.
,
Dagba
,
L.
, and
Chang
,
F. K.
, 2000, “
Damage-Tolerance-Based Design of Bolted Composite Joints
,”
Composite Structures: Theory and Practice
,
P.
Grant
and
C. Q.
Rousseau
, eds.,
American Society for Testing and Materials
,
West Conshocken, PA
, pp.
243
272
.
205.
Shahid
,
I.
, and
Chang
,
F. K.
, 1995, “
An Accumulative Damage Model for Tensile and Shear Failures of Laminated Composite Plates
,”
J. Compos. Mater.
0021-9983,
29
(
7
), pp.
926
981
.
206.
Qing
,
X.
,
Chang
,
F. K.
, and
Starnes
,
J.
, 2003, “
Damage Tolerance of Notched Composite Laminates With Reinforcing Strips
,”
J. Compos. Mater.
0021-9983,
37
(
2
), pp.
111
128
.
207.
Idelsohn
,
S.
,
Laschet
,
G.
, and
Nyssen
,
C.
, 1982, “
Pre- and Post-Degradation Analysis of Composite Materials With Different Moduli in Tension and Compression
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
30
(
2
), pp.
133
149
.
208.
Sandhu
,
R. S.
,
Gallo
,
R. L.
, and
Sendeckyj
,
G. P.
, 1982, “
Initiation and Accumulation of Damage in Composite Laminates
,”
Composite Materials: Testing and Design
,
I. M.
Daniel
, ed.,
American Society for Testing and Materials
,
Philadelphia
, ASTM STP 787, pp.
163
182
.
209.
Lin
,
W. P.
, and
Hu
,
H. T.
, 2002, “
Nonlinear Analysis of Fiber-Reinforced Composite Laminates Subjected to Uniaxial Tensile Load
,”
J. Compos. Mater.
0021-9983,
36
(
12
), pp.
1429
1450
.
210.
Lin
,
W. P.
, and
Hu
,
H. T.
, 2002, “
Parametric Study on the Failure of Fiber-Reinforced Composite Laminates Under Biaxial Tensile Load
,”
J. Compos. Mater.
0021-9983,
36
(
12
), pp.
1481
1503
.
211.
Moas
,
E.
, and
Griffin
,
O. H.
, Jr.
, 1997, “
Progressive Failure Analysis of Laminated Composites Structures
,”
Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
, Kissimmee, FL, Apr. 7–10, pp.
2246
2256
.
212.
Petit
,
P. H.
, and
Waddoups
,
M. E.
, 1969, “
A Method of Predicting the Nonlinear Behavior of Laminated Composites
,”
J. Compos. Mater.
0021-9983,
3
(
1
), pp.
2
19
.
213.
Grimes
,
G. C.
, and
Whitney
,
J. M.
, 1974, “
Degradation of Graphite/Epoxy Composite Materials Because of Load Induced Micromechanical Damage
,”
SAMPE Q.
0036-0821,
5
(
4
), pp.
1
13
.
214.
Craddock
,
J. N.
, 1985, “
Behavior of Composite Laminates After First-Ply-Failure
,”
Compos. Struct.
0263-8223,
3
(
2
), pp.
187
200
.
215.
Nahas
,
M. N.
, 1986, “
Yield and Ultimate Strengths of Fibre Composite Laminates
,”
Compos. Struct.
0263-8223,
6
(
4
), pp.
283
294
.
216.
Hahn
,
H. T.
,
Kiusalaas
,
J.
,
Burns
,
B. P.
, and
Bogetti
,
T. A.
, 1992, “
Constitutive Modeling of Composite Laminates With Progressive Ply Cracking
,”
Proceedings of ASME International Computers in Engineering Conference and Exposition
, San Francisco, CA, Aug. 2–6, pp.
185
193
.
217.
Lee
,
J. W.
, and
Daniel
,
I. M.
, 1990, “
Progressive Transverse Cracking of Crossply Composite Laminates
,”
J. Compos. Mater.
0021-9983,
24
(
11
), pp.
1225
1243
.
218.
Zinoviev
,
P. A.
,
Grigoriev
,
S. V.
,
Lebedeva
,
O. V.
, and
Tairova
,
L. P.
, 1998, “
The Strength of Multilayered Composites Under a Plane-Stress State
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1209
1223
.
219.
Zinoviev
,
P. A.
,
Lebedeva
,
O. V.
, and
Tairova
,
L. P.
, 2002, “
A Coupled Analysis of Experimental and Theoretical Results on the Deformation and Failure of Laminated Composites Under a State of Plane Stress
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1711
1723
.
220.
Kim
,
Y. W.
, and
Hong
,
C. S.
, 1992, “
Progressive Failure Model for the Analysis of Laminated Composites Based on Finite Element Approach
,”
J. Reinf. Plast. Compos.
0731-6844,
11
(
10
), pp.
1078
1092
.
221.
Lim
,
S. G.
, and
Hong
,
C. S.
, 1989, “
Prediction of Transverse Cracking and Stiffness Reduction in Cross-Ply Laminated Composites
,”
J. Compos. Mater.
0021-9983,
23
(
7
), pp.
695
713
.
222.
Chang
,
K. Y.
,
Liu
,
S.
, and
Chang
,
F. K.
, 1991, “
Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Tensile Loadings
,”
J. Compos. Mater.
0021-9983,
25
(
3
), pp.
274
301
.
223.
Shahid
,
I.
, and
Chang
,
F. K.
, 1992, “
Modeling of Failure and Response to Laminated Composites Subjected to In-plane Loads
,”
Workshop on Computational Methods for Failure Analysis and Life Prediction
, Hampton, VA, Oct. 14–15, pp.
83
120
.
224.
Shahid
,
I.
,
Sun
,
H. T.
, and
Chang
,
F. K.
, 1995, “
Predicting Scaling Effect on the Notched Strength of Prepreg and Fiber Tow-Placed Laminated Composites
,”
J. Compos. Mater.
0021-9983,
29
(
8
), pp.
1063
1095
.
225.
Hung
,
C. L.
, and
Chang
,
F. K.
, 1996, “
Bearing Failure of Bolted Composite Joints. Part II: Model and Verification
,”
J. Compos. Mater.
0021-9983,
30
(
12
), pp.
1359
1400
.
226.
Hung
,
C. L.
, and
Chang
,
F. K.
, 1996, “
Strength Envelope of Bolted Composite Joints Under Bypass Loads
,”
J. Compos. Mater.
0021-9983,
30
(
13
), pp.
1402
1435
.
227.
Kwon
,
Y. W.
, and
Berner
,
J. M.
, 1997, “
Matrix Damage of Fibrous Composites: Effects of Thermal Residual Stresses and Layer Sequences
,”
Comput. Struct.
0045-7949,
64
(
1–4
), pp.
375
382
.
228.
Kwon
,
Y. W.
, and
Berner
,
J. M.
, 1994, “
Analysis of Matrix Damage Evolution in Laminated Composite Plates
,”
Eng. Fract. Mech.
0013-7944,
48
(
6
), pp.
811
817
.
229.
Swanson
,
S. R.
, and
Christoforou
,
A. P.
, 1986, “
Response of Quasi-Isotropic Carbon/Epoxy Laminates to Biaxial Stress
,”
J. Compos. Mater.
0021-9983,
20
(
5
), pp.
457
471
.
230.
Swanson
,
S. R.
, and
Christoforou
,
A. P.
, 1987, “
Progressive Failure in Carbon/Epoxy Laminates Under Biaxial Stress
,”
ASME J. Eng. Mater. Technol.
0094-4289,
109
(
1
), pp.
12
16
.
231.
Hwang
,
T. K.
,
Hong
,
C. S.
, and
Kim
,
C. G.
, 2003, “
Probabilistic Deformation and Strength Prediction for a Filament Wound Pressure Vessel
,”
Composites, Part B
1359-8368,
34
(
5
), pp.
481
497
.
232.
Edge
,
E. C.
, 1998, “
Stress-Based Grant–Sanders Method for Predicting Failure of Composite Laminates
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1033
1041
.
233.
Edge
,
E. C.
, 2002, “
A Comparison of Theory and Experiment for Stress-Based Grant–Sanders Method
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1571
1589
.
234.
Rotem
,
A.
, 1998, “
Prediction of Laminate Failure With Rotem Failure Criterion
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1083
1094
.
235.
Rotem
,
A.
, 2002, “
The Rotem Failure Criterion: Theory and Practice
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1663
1671
.
236.
Sun
,
C. T.
, and
Tao
,
J.
, 1998, “
Prediction of Failure Envelopes and Stress/Strain Behavior of Composite Laminates
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1125
1136
.
237.
Sun
,
C. T.
,
Tao
,
J.
, and
Kaddour
,
A. S.
, 2002, “
Prediction of Failure Envelopes and Stress-Strain Behavior of Composite Laminates: Comparison With Experimental Results
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1673
1682
.
238.
Tao
,
X. J.
, and
Sun
,
C. T.
, 1996, “
Effect of Matrix Cracking on Stiffness of Composite Laminates
,”
Mech. Compos. Mater. Struct.
1075-9417,
3
(
3
), pp.
225
239
.
239.
Puck
,
A.
, and
Schürmann
,
H.
, 1998, “
Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models
,”
Compos. Sci. Technol.
0266-3538,
58
(
7
), pp.
1045
1067
.
240.
Puck
,
A.
, and
Schürmann
,
H.
, 2002, “
Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models—Part B
,”
Compos. Sci. Technol.
0266-3538,
62
(
12–13
), pp.
1633
1662
.
241.
Cuntze
,
R. G.
, and
Freund
,
A.
, 2004, “
The Predictive Capability of Failure Mode Concept-Based Strength Criteria for Multidirectional Laminates
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
343
377
.
242.
Cuntze
,
R. G.
, 2004, “
The Predictive Capability of Failure Mode Concept-based Strength Criteria for Multi-Directional Laminates: Part B
,”
Compos. Sci. Technol.
0266-3538,
64
(
3–4
), pp.
487
516
.
243.
Knops
,
M.
, and
Bogle
,
C.
, 2006, “
Gradual Failure in Fibre/Polymer Laminates
,”
Compos. Sci. Technol.
0266-3538,
66
(
5
), pp.
616
625
.
244.
Puck
,
A.
, 1969, “
Festigkeitsberechnung and Glasfaser/Kunststoff-Laminaten bei Zusannengesetzter Beanspruchung: Bruchhypothesen und Schichtweise Bruchanalyse
,”
Kunststoffe
0023-5563,
55
, pp.
18
19
.
245.
Hult
,
J.
, 1987, “
Introduction and General Overview
,”
Continuum Damage Mechanics: Theory and Applications
,
D.
Krajcinovic
and
J.
Lemaitre
, eds.,,
Springer-Verlag
,
New York
, pp.
1
36
.
246.
Lemaitre
,
J.
, 1996,
A Course on Damage Mechanics
,
2nd ed.
,
Springer-Verlag
,
Germany
.
247.
Voyiadjis
,
G. Z.
, and
Kattan
,
P. I.
, 2005,
Damage Mechanics
,
Taylor & Francis
,
New York
.
248.
Murakami
,
S.
, and
Kamiya
,
K.
, 1997, “
Constitutive and Damage Evolution Equations of Elastic-Brittle Materials Based on Irreversible Thermodynamics
,”
Int. J. Mech. Sci.
0020-7403,
39
(
4
), pp.
473
486
.
249.
Germain
,
P.
,
Nguyen
,
Q. S.
, and
Suquet
,
P.
, 1983, “
Continuum Thermodynamics
,”
ASME J. Appl. Mech.
0021-8936,
50
, pp.
1010
1020
.
250.
Lemaitre
,
J.
, and
Chaboche
,
J. L.
, 1990,
Mechanics of Solid Materials
,
Cambridge University Press
,
Cambridge
.
251.
Lawrence
,
M. E.
, 1969,
Introduction to the Mechanics of a Continuous Medium
,
Prentice-Hall
,
Englewood Cliffs, NJ
.
252.
Renard
,
J.
,
Favre
,
J. P.
, and
Jeggy
,
Th.
, 1993, “
Influence of Transverse Cracking on Ply Behavior: Introduction of a Characteristic Damage Variable
,”
Compos. Sci. Technol.
0266-3538,
46
(
1
), pp.
29
37
.
253.
Thionnet
,
A.
,
Lesne
,
P. -M.
, and
Renard
,
J.
, 1991, “
Using Characteristic Damage Variables to Simulate Degradations and Their Evolutions in Composite Materials—Comparison Between Experimental and Numerical Simulations
,”
14th Annual Energy-Sources Technology Conference and Exhibition
, Houston, TX, Jan. 20–23, pp.
105
111
.
254.
Renard
,
J.
, and
Thionnet
,
A.
, 1992, “
Meso-Macro Approach to Predict the Damage Evolution of Transverse Cracking in Laminated Composite
,”
Winter Annual Meeting of the American Society of Mechanical Engineers
, Anaheim, CA, Nov. 8–13, pp.
31
39
.
255.
Renard
,
J.
, and
Thionnet
,
A.
, 2006, “
Damage in Composites: From Physical Mechanisms to Modelling
,”
Compos. Sci. Technol.
0266-3538,
66
(
5
), pp.
642
646
.
256.
Thionnet
,
A.
, and
Renard
,
J.
, 1993, “
Meso-Macro Approach to Transverse Cracking in Laminated Composites Using Talreja’s Model
,”
Composites Eng.
0961-9526,
3
(
9
), pp.
851
871
.
257.
Nguyen
,
B. N.
, 1997, “
Three-Dimensional Modeling of Damage in Laminated Composites Containing a Central Hole
,”
J. Compos. Mater.
0021-9983,
31
(
17
), pp.
1672
1693
.
258.
Nguyen
,
B. N.
, 1997, “
A Three-Dimensional Modeling of Transverse Matrix Cracking in Laminated Composites
,”
Key Eng. Mater.
1013-9826,
127–131
(
2
), pp.
1117
1126
.
259.
Nguyen
,
B. N.
, 1998, “
Damage Modeling of Laminated Composites by the Use of Multilayer Volume Elements
,”
Compos. Sci. Technol.
0266-3538,
58
(
6
), pp.
891
905
.
260.
Laws
,
N.
,
Dvorak
,
G. J.
, and
Hejazi
,
M.
, 1983, “
Stiffness Changes in Unidirectional Composites Caused by Crack Systems
,”
Mech. Mater.
0167-6636,
2
(
2
), pp.
123
137
.
261.
Dvorak
,
G. J.
,
Laws
,
N.
, and
Hejazi
,
M.
, 1985, “
Analysis of Progressive Matrix Cracking in Composite Laminates I. Thermoelastic Properties of a Ply With Cracks
,”
J. Compos. Mater.
0021-9983,
19
(
3
), pp.
216
234
.
262.
Phillips
,
E. A.
,
Herakovich
,
C. T.
, and
Graham
,
L. L.
, 2001, “
Damage Development in Composites With Large Stress Gradients
,”
Compos. Sci. Technol.
0266-3538,
61
(
15
), pp.
2169
2182
.
263.
Allix
,
O.
,
Ladaveze
,
P.
,
Gilletta
,
D.
, and
Ohayon
,
R.
, 1989, “
A Damage Prediction Method for Composite Structures
,”
Int. J. Numer. Methods Eng.
0029-5981,
27
(
2
), pp.
271
283
.
264.
Herakovich
,
C. T.
, 1998,
Mechanics of Fibrous Composites
,
Wiley
,
New York
.
265.
Flesher
,
N. D.
, and
Herakovich
,
C. T.
, 2006, “
Predicting Delamination in Composite Structures
,”
Compos. Sci. Technol.
0266-3538,
66
(
6
), pp.
745
754
.
266.
Coats
,
T. W.
, and
Harris
,
C. E.
, 1999, “
A Progressive Damage Methodology for Residual Strength Predictions of Notched Composite Panels
,”
J. Compos. Mater.
0021-9983,
33
(
23
), pp.
2193
2224
.
267.
Coats
,
T. W.
, and
Harris
,
C. E.
, 1998, “
A Damage-Dependent Finite Element Analysis for Fiber-Reinforced Composite Laminates
,”
1998 International Conference on Computational Engineering Sciences
, Atlanta, GA, Oct. 6–9.
268.
Allen
,
D. H.
,
Harris
,
C. E.
, and
Groves
,
S. E.
, 1987, “
A Thermomechanical Constitutive Theory for Elastic Composites With Distributed Damage—I. Theoretical Development
,”
Int. J. Solids Struct.
0020-7683,
23
(
9
), pp.
1301
1318
.
269.
Allen
,
D. H.
,
Harris
,
C. E.
, and
Groves
,
S. E.
, 1987, “
Thermo-Mechanical Constitutive Theory for Elastic Composites With Distributed Damage—II. Application to Matrix Cracking in Laminated Composites
,”
Int. J. Solids Struct.
0020-7683,
23
(
9
), pp.
1319
1338
.
270.
Allen
,
D. H.
,
Harris
,
C. E.
, and
Groves
,
S. E.
, 1987, “
Damage Modelling in Laminated Composites
,”
Proceedings of IUTAM/ICM Symposium on Yielding, Damage, and Failure of Anisotropic Solids
, Villard-de-Lans, France, Aug. 24–28, p.
535
.
271.
Tay
,
T. E.
,
Lam
,
K. Y.
, and
Cen
,
Z.
, 1997, “
Analysis of Composite Structures With Distributed and Localized Damage by the Finite-Element Method
,”
Compos. Struct.
0263-8223,
37
(
2
), pp.
135
143
.
272.
Tay
,
T. E.
, and
Lim
,
E. H.
, 1996, “
Analysis of Composite Laminates With Transverse Cracks
,”
Compos. Struct.
0263-8223,
34
(
4
), pp.
419
426
.
273.
Tay
,
T. E.
,
Lim
,
E. H.
, and
Tay
,
A. A. O.
, 1994, “
Analysis of Stresses in Cross-Ply Laminates Containing Distributed Transverse Cracks
,”
Finite Elem. Anal. Des.
,
18
(
1–3
), pp.
301
308
. 0168-874X
274.
Lim
,
E. H.
, and
Tay
,
T. E.
, 1996, “
Stiffness Loss of Composite Laminates With Transverse Cracks Under Mode I and Mode III Loading
,”
Int. J. Damage Mech.
1056-7895,
5
(
2
), pp.
190
215
.
275.
Tay
,
T. E.
, and
Lim
,
E. H.
, 1993, “
Analysis of Stiffness Loss in Cross-Ply Composite Laminates
,”
Compos. Struct.
0263-8223,
25
(
1–4
), pp.
419
423
.
276.
Kennedy
,
T. C.
, and
Nahan
,
M. F.
, 1996, “
A Simple Nonlocal Damage Model for Predicting Failure of Notched Laminates
,”
Compos. Struct.
0263-8223,
35
(
2
), pp.
229
236
.
277.
Kennedy
,
T. C.
, and
Nahan
,
M. F.
, 1997, “
A Simple Nonlocal Damage Model for Predicting Failure in a Composite Shell Containing a Crack
,”
Compos. Struct.
0263-8223,
39
(
1–2
), pp.
85
91
.
278.
Nahan
,
M. F.
, and
Kennedy
,
T. C.
, 2000, “
A Nonlocal Damage Theory for Laminated Plate With Application to Aircraft Damage Tolerance
,”
J. Reinf. Plast. Compos.
0731-6844,
19
(
5
), pp.
354
363
.
279.
Engblom
,
J. J.
,
Yang
,
Q.
,
Abdul-samad
,
N.
, and
Havelka
,
J.
, 1993, “
Residual Property Predictions for Laminated Composite Structures: FE Based Internal State Variable Approach
,”
Proceedings of the 33rd Structures, Dynamics and Materials Conference
, Dallas, TX, Apr. l 13–15, pp.
21
28
.
280.
Yang
,
Q.
, and
Engblom
,
J. J.
, 1995, “
Finite Element Based Sub-Laminate Damage Model for Intraply Cracking
,”
J. Reinf. Plast. Compos.
0731-6844,
14
(
3
), pp.
233
254
.
281.
Engblom
,
J. J.
, 1987, “
Modelling the Effects of Intraply Cracking in Composite Laminates at the Sublaminate Level
,”
Proceedings of the ASME Pressure Vessels and Piping Conference
,
American Society of Mechanical Engineers, Pressure Vessels and Piping Division
,
New York
, Vol.
121
, pp.
105
110
.
282.
Talreja
,
R.
, 1985, “
A Continuum Mechanics Characterization of Damage in Composite Materials
,”
Proc. R. Soc. London, Ser. A
0950-1207,
399
, pp.
195
216
.
283.
Talreja
,
R.
, 1985, “
Transverse Cracking and Stiffness Reduction in Composite Laminates
,”
J. Compos. Mater.
0021-9983,
19
(
4
), pp.
355
375
.
284.
Talreja
,
R.
, 1987, “
Modeling of Damage Development in Composites Using Internal Variables Concepts
,”
Winter Annual Meeting of the American Society of Mechanical Engineers
, Boston, MA, Dec. 13–18, pp.
11
16
.
285.
Talreja
,
R.
, 1994, “
Damage Characterization by Internal Variables
,”
Damage Mechanics of Composite Materials
(
Composite Materials Series
),
R.
Talreja
, ed.,
Elsevier Science
,
Amsterdam
, Vol.
9
, pp.
53
78
.
286.
Talreja
,
R.
, 1987, “
Internal Variable Damage Mechanics of Composite Materials
,”
Proceedings of IUTAM/ICM Symposium on Yielding, Damage, and Failure of Anisotropic Solids
, Villard-de-Lans, France, Aug. 24–28, pp.
509
533
.
287.
Talreja
,
R.
,
Yalvac
,
S.
,
Yats
,
L. D.
, and
Wetters
,
D. G.
, 1992, “
Transverse Cracking and Stiffness Reduction in Cross Ply Laminates of Different Matrix Toughness
,”
J. Compos. Mater.
0021-9983,
26
(
11
), pp.
1644
1663
.
288.
Goyal
,
V. K.
,
Jaunky
,
N. R.
,
Johnson
,
E. R.
, and
Ambur
,
D. R.
, 2004, “
Intralaminar and Interlaminar Progressive Failure Analyses of Composite Panels With Circular Cutouts
,”
Compos. Struct.
0263-8223,
64
(
1
), pp.
91
105
.
289.
Schipperen
,
J. H. A.
, 2001, “
An Anisotropic Damage Model for the Description of Transverse Matrix Cracking in a Graphite-Epoxy Laminate
,”
Compos. Struct.
0263-8223,
53
(
3
), pp.
295
299
.
290.
Isometsa
,
J.
, and
Sjoling
,
S. G.
, 1999, “
A Continuum Damage Mechanics Model for Fiber Reinforced Composites
,”
Int. J. Damage Mech.
1056-7895,
8
(
1
), pp.
2
17
.
291.
Yang
,
F.
, and
Chow
,
C. L.
, 1998, “
Progressive Damage of Unidirectional Graphite/Epoxy Composites Containing a Circular Hole
,”
J. Compos. Mater.
0021-9983,
32
(
6
), pp.
504
525
.
292.
Chow
,
C. L.
, and
Yang
,
F.
, 1994, “
Inelastic Finite Element Analysis of Fiber Reinforced Laminates Damage
,
International Mechanical Engineering Congress and Exposition
, Chicago IL, Nov. 6–11, pp.
111
135
.
293.
Chow
,
C. L.
, and
Yang
,
F.
, 1992, “
A Simple Model for Brittle Composite Lamina With Damage
,”
J. Reinf. Plast. Compos.
0731-6844,
11
(
3
), pp.
222
242
.
294.
Chow
,
C. L.
, and
Yang
,
F.
, 1991, “
On One-Parameter Description of Damage State for Brittle Material
,”
Eng. Fract. Mech.
0013-7944,
40
(
2
), pp.
335
343
.
295.
Chow
,
C. L.
, and
Yang
,
F.
, 1997, “
Three-Dimensional Inelastic Stress Analysis of Center Notched Composite Laminates With Damage
,”
Int. J. Damage Mech.
1056-7895,
6
(
1
), pp.
23
50
.
296.
Chow
,
C. L.
,
Yang
,
F.
, and
Asundi
,
A.
, 1993, “
A Three-Dimensional Analysis of Symmetric Composite Laminates With Damage
,”
Int. J. Damage Mech.
1056-7895,
2
(
3
), pp.
229
245
.
297.
Chow
,
C. L.
,
Yang
,
F.
, and
Asundi
,
A.
, 1992, “
A Method for Nonlinear Damage Analysis for Anisotropic Materials and Its Application to Thin Composite Materials
,”
Int. J. Damage Mech.
1056-7895,
1
(
3
), pp.
347
366
.
298.
Chatterjee
,
S. N.
, 2000, “
Damage, Stiffness Loss, and Failure in Composite Structures
,”
Composite Structures: Theory and Practice
,
P.
Grant
and
C. Q.
Rousseau
, eds.,
American Society for Testing and Materials
,
West Conshohocken, PA
, ASTM STP 1383, pp.
452
469
.
299.
Turon
,
A.
,
Costa
,
J.
,
Maimi
,
P.
,
Trias
,
D.
, and
Mayugo
,
J. A.
, 2005, “
A Progressive Damage Model for Unidirectional Fibre-Reinforced Composites Based on Fibre Fragmentation. Part I: Formulation
,”
Compos. Sci. Technol.
0266-3538,
65
(
13
), pp.
2039
2048
.
300.
Barbero
,
E. J.
, and
Lonetti
,
P.
, 2001, “
Damage Model for Composites Defined in Terms of Available Data
,”
Mech. Compos. Mater. Struct.
1075-9417,
8
(
4
), pp.
299
315
.
301.
Barbero
,
E. J.
, and
Lonetti
,
P.
, 2002, “
An Inelastic Damage Model for Fiber Reinforced Laminates
,”
J. Compos. Mater.
0021-9983,
36
(
8
), pp.
941
962
.
302.
Barbero
,
E. J.
, and
Vivo
,
L. D.
, 2001, “
A Constitutive Model for Elastic Damage in Fiber-Reinforced PMC Laminae
,”
Int. J. Damage Mech.
1056-7895,
10
(
1
), pp.
73
93
.
303.
Barbero
,
E. J.
,
Abdelal
,
G. F.
, and
Caceres
,
A.
, 2005, “
A Micromechanics Approach for Damage Modeling of Polymer Matrix Composites
,”
Compos. Struct.
0263-8223,
67
(
4
), pp.
427
436
.
304.
Ladeveze
,
P.
, and
La Dantec
,
E.
, 1992, “
Damage Modelling of the Elementary Ply for Laminated Composites
,”
Compos. Sci. Technol.
0266-3538,
43
(
3
), pp.
257
267
.
305.
Ladeveze
,
P.
, 1992, “
A Damage Computational Method for Composite Structures
,”
Comput. Struct.
0045-7949,
44
(
1–2
), pp.
79
87
.
306.
Allix
,
O.
,
Bahlouli
,
N.
,
Cluzel
,
C.
, and
Perret
,
L.
, 1996, “
Modelling and Identification of Temperature Dependent Mechanical Behavior of the Elementary Ply in Carbon/Epoxy Laminates
,”
Compos. Sci. Technol.
0266-3538,
56
(
7
), pp.
883
888
.
307.
Reid
,
S. R.
, and
Soden
,
P. D.
, “1998, “
A Continuum Damage Model for Transverse Matrix Cracking in Laminated Fibre-Reinforced Composites
,”
Philos. Trans. R. Soc. London, Ser. A
0962-8428,
356
, pp.
2379
2412
.
308.
Matzenmiller
,
A.
,
Lubliner
,
J.
, and
Taylor
,
R. L.
, 1995, “
A Constitutive Model for Anisotropic Damage in Fiber-Composites
,”
Mech. Mater.
0167-6636,
20
(
2
), pp.
125
152
.
309.
Hammer
,
V. B.
, 2000, “
Optimization of Fibrous Laminates Undergoing Progressive Damage
,”
Int. J. Numer. Methods Eng.
0029-5981,
48
(
9
), pp.
1265
1284
.
310.
Hammer
,
V. B.
, and
Pedersen
,
P.
, 1999, “
On an Orthotropic Model for Progressive Degradation
,”
Compos. Struct.
0263-8223,
46
(
3
), pp.
217
228
.
You do not currently have access to this content.