There are many technical applications in the field of lightweight construction as, for example, in aerospace engineering, where stress concentration phenomena play an important role in the design of layered structural elements (so-called laminates) consisting of plies of fiber reinforced plastics or other materials. A well known stress concentration problem rich in research tradition is the so-called free-edge effect. Mainly explained by the mismatch of the elastic material properties between two adjacent dissimilar laminate layers, the free-edge effect is characterized by the concentrated occurrence of three-dimensional and singular stress fields at the free edges in the interfaces between two layers of composite laminates. In the present contribution, a survey on relevant literature from more than three decades of scientific research on free-edge effects is given. The cited references date back to 1967 and deal with approximate closed-form analyses, as well as numerical investigations by the finite element method, the finite difference method, and several other numerical techniques. The progress in research on the stress singularities which arise is also reviewed, and references on experimental investigations are cited. Related problems are also briefly addressed. The paper closes with concluding remarks and an outlook on future investigations. In all, 292 references are included.

1.
Ashton
,
J. E.
, and
Whitney
,
J. M.
, 1970,
Theory of Laminated Plates
,
Technomic
,
Stamford
.
2.
Jones
,
R. M.
, 1975,
Mechanics of Composite Materials
,
Scripta Book Co.
,
Washington
.
3.
Bert
,
C. W.
, 1975, “
Analysis of Plates
,”
Composite Materials
,
L. J.
Broutman
and
R. H.
Krock
, eds., Vol.
7
,
Structural Design and Analysis
,
C. C.
Chamis
, ed.,
Academic
,
New York
, Vol.
1
, Pt. I, pp.
150
206
.
4.
Tsai
,
S. W.
, and
Hahn
,
H. T.
, 1980,
Introduction to Composite Materials
,
Technomic
,
Lancaster
.
5.
Herakovich
,
C. T.
, 1998,
Mechanics of Fibrous Composites
,
Wiley
,
New York
.
6.
Reddy
,
J. N.
, 2004,
Mechanics of Laminated Composite Plates and Shells
, 2nd ed.,
CRC
,
Boca Raton, FL
.
7.
Bogdanovich
,
A. E.
, and
Sierakowski
,
R. L.
, 1999, “
Composite Materials and Structures: Science, Technology and Applications
,”
Appl. Mech. Rev.
0003-6900,
52
, pp.
351
366
.
8.
Noor
,
A. K.
, and
Burton
,
W. S.
, 1989, “
Assessment of Shear Deformation Theories for Multilayered Composite Plates
,”
Appl. Mech. Rev.
0003-6900,
42
, pp.
1
13
.
9.
Noor
,
A. K.
, and
Burton
,
W. S.
, 1990, “
Assessment of Computational Models for Multilayered Anisotropic Plates
,”
Compos. Struct.
0263-8223,
14
, pp.
233
265
.
10.
Pipes
,
R. B.
, and
Pagano
,
N. J.
, 1970, “
Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension
,”
J. Compos. Mater.
0021-9983,
4
, pp.
538
548
.
11.
Pipes
,
R. B.
, and
Daniel
,
I. M.
, 1971, “
Moire Analysis of the Interlaminar Shear Edge Effect in Laminated Composites
,”
J. Compos. Mater.
0021-9983,
5
, pp.
255
259
.
12.
Herakovich
,
C. T.
,
Post
,
D.
,
Buczek
,
M. B.
, and
Czarnek
,
R.
, 1985, “
Free Edge Strain Concentrations in Real Composite Laminates: Experimental-Theoretical Correlation
,”
ASME J. Appl. Mech.
0021-8936,
52
, pp.
787
793
.
13.
Herakovich
,
C. T.
, 1989, “
Free Edge Effects in Laminated Composites
,”
Handbook of Composites
,
Herakovich
,
C. T.
, and
Tarnopol’skii
,
Y. M.
, eds.,
Elsevier Science B. V.
,
Amsterdam
, Vol.
2
, pp.
187
230
.
14.
Kassapoglou
,
C.
, and
Lagace
,
P. A.
, 1986, “
An Efficient Method for the Calculation of Interlaminar Stresses in Composite Materials
,”
ASME J. Appl. Mech.
0021-8936,
53
, pp.
744
750
.
15.
Kassapoglou
,
C.
, and
Lagace
,
P. A.
, 1987, “
Closed Form Solutions for the Interlaminar Stress Field in Angle-Ply and Cross-Ply Laminates
,”
J. Compos. Mater.
0021-9983,
21
, pp.
292
308
.
16.
Hayashi
,
T.
, 1967, “
Analytical Study of Interlaminar Shear Stresses in a Laminated Composite Plate
,”
Trans. Jpn. Soc. Aeronaut. Space Sci.
0549-3811,
10
, pp.
43
48
.
17.
Puppo
,
A. H.
, and
Evensen
,
H. A.
, 1970, “
Interlaminar Shear in Laminated Composites Under Generalized Plane Stress
,”
J. Compos. Mater.
0021-9983,
4
, pp.
204
220
.
18.
Pagano
,
N. J.
, and
Pipes
,
R. B.
, 1971, “
The Influence of Stacking Sequence on Laminate Strength
,”
J. Compos. Mater.
0021-9983,
5
, pp.
50
57
.
19.
Pagano
,
N. J.
, and
Pipes
,
R. B.
, 1973, “
Some Observations on the Interlaminar Strength of Composite Laminates
,”
Int. J. Mech. Sci.
0020-7403,
15
, pp.
679
688
.
20.
Harris
,
A.
, and
Orringer
,
O.
, 1978, “
Investigation of Angle-Ply Delamination Specimen for Interlaminar Strength Test
,”
J. Compos. Mater.
0021-9983,
12
, pp.
285
299
.
21.
Conti
,
P.
, and
De Paulis
,
A.
, 1985, “
A Simple Model to Simulate the Interlaminar Stresses Generated Near the Free Edge of a Composite Laminate
,”
Delamination and Debonding of Materials, ASTM, STP 876
,
Johnson
,
W. S.
, ed.,
American Society for Testing and Materials
,
Philadelphia
, pp.
35
51
.
22.
Valisetty
,
R. R.
, and
Rehfield
,
L. W.
, 1985, “
A New Ply Model for Interlaminar Stress Analysis
,”
Delamination and Debonding of Materials, ASTM, STP 876
,
Johnson
,
W. S.
, ed.,
American Society for Testing and Materials
,
Philadelphia
, pp.
52
68
.
23.
Moore
,
T. D.
, and
Jarvis
,
J. L.
, 2004, “
Peeling in Bimaterial Beams: The Peeling Moment and Its Relation to the Differential Rigidity
,”
ASME J. Appl. Mech.
0021-8936,
71
, pp.
290
292
.
24.
Pagano
,
N. J.
, 1974, “
On the Calculation of Interlaminar Normal Stress in Composite Laminate
,”
J. Compos. Mater.
0021-9983,
8
, pp.
65
81
.
25.
Whitney
,
J. M.
, 1987,
Structural Analysis of Laminated Anisotropic Plates
,
Technomic
,
Lancaster
.
26.
Krishna Murty
,
A. V.
, and
Hari Kumar
,
H. K.
, 1989, “
Modelling of Symmetric Laminates Under Extension
,”
Compos. Struct.
0263-8223,
11
, pp.
15
32
.
27.
Becker
,
W.
, 1993,
Beiträge zur Analytischen Behandlung Ebener Laminate
,
VDI
,
Düsseldorf
.
28.
Becker
,
W.
, 1993, “
Closed-Form Solution for the Free-Edge Effect in Cross-Ply Laminates
,”
Compos. Struct.
0263-8223,
26
, pp.
39
45
.
29.
Becker
,
W.
, 1993, “
Geschlossen-Analytische Behandlung Des Laminat-Randeffekts Beim [±θ]S-Winkelverbund
,”
ZAMM
0044-2267,
73
, pp.
T429
T432
.
30.
Becker
,
W.
, 1994, “
Closed-Form Analysis of the Free Edge Effect in Angle-Ply Laminates
,”
ASME J. Appl. Mech.
0021-8936,
61
, pp.
209
211
.
31.
Becker
,
W.
, 1995, “
Free-Edge Stress Concentration in Angle-Ply Laminates
,”
Arch. Appl. Mech.
0939-1533,
65
, pp.
38
43
.
32.
Becker
,
W.
, and
Kress
,
G.
, 1994, “
Stiffness Reduction in Laminate Coupons Due to the Free-Edge Effect
,”
Compos. Sci. Technol.
0266-3538,
52
, pp.
109
115
.
33.
Becker
,
W.
, 1995, “
Zum Breiteneinfluss von Steifigkeitsmessungen bei Laminat-Zugproben
,”
ZAMM
0044-2267,
75
, pp.
S143
S144
.
34.
Becker
,
W.
, 1996, “
The Clamping Effect in [±α]S-Angle-Ply Laminates
,”
Arch. Appl. Mech.
0939-1533,
66
, pp.
419
426
.
35.
Becker
,
W.
, 1997, “
The Influence of Clamping on Uniaxial Laminate Tensile Tests
,”
ZAMM
0044-2267,
77
, pp.
S513
S514
.
36.
Pipes
,
R. B.
, and
Pagano
,
N. J.
, 1974, “
Interlaminar Stresses in Composite Laminates: An Approximate Elasticity Solution
,”
ASME J. Appl. Mech.
0021-8936,
41
, pp.
668
672
.
37.
Hsu
,
P. W.
, and
Herakovich
,
C. T.
, 1977, “
A Perturbation Solution for Interlaminar Stresses in Bidirectional Laminates
,”
Composite Materials: Testing and Design (Fourth Conference), ASTM, STP, 617
,
American Society for Testing and Materials
,
Philadelphia
, pp.
296
316
.
38.
Hsu
,
P. W.
, and
Herakovich
,
C. T.
, 1977, “
Edge Effects in Angle-Ply Composite Laminates
,”
J. Compos. Mater.
0021-9983,
11
, pp.
422
428
.
39.
Wang
,
J. T. S.
, and
Dickson
,
J. N.
, 1978, “
Interlaminar Stresses in Symmetric Composite Laminates
,”
J. Compos. Mater.
0021-9983,
12
, pp.
390
402
.
40.
Kress
,
G.
, and
Becker
,
W.
, 1995, “
Effective Tensile Stiffness of Finite-Width Quasi-Isotropic Laminates
,”
J. Reinf. Plast. Compos.
0731-6844,
14
, pp.
1043
1053
.
41.
Zhu
,
C.
, and
Lam
,
Y. C.
, 1998, “
A Rayleigh-Ritz Solution for Local Stresses in Composite Laminates
,”
Compos. Sci. Technol.
0266-3538,
58
, pp.
447
461
.
42.
Tahani
,
M.
, and
Nosier
,
A.
, 2003, “
Free Edge Stress Analysis of General Cross-Ply Composite Laminates Under Extension and Thermal Loading
,”
Compos. Struct.
0263-8223,
60
, pp.
91
103
.
43.
Nosier
,
A.
,
Kapania
,
R. K.
, and
Reddy
,
J. N.
, 1993, “
Free Vibration Analysis of Laminated Plates Using a Layerwise Theory
,”
AIAA J.
0001-1452,
31
, pp.
2335
2346
.
44.
Flanagan
,
G.
, 1994, “
An Efficient Stress Function Approximation for the Free-Edge Stresses in Laminates
,”
Int. J. Solids Struct.
0020-7683,
31
, pp.
941
952
.
45.
Lekhnitskii
,
S. G.
, 1963,
Theory of Elasticity of an Anisotropic Body
,
Holden-Day
,
San Francisco
.
46.
Kassapoglou
,
C.
, 1989, “
The Effect of Combined Loading and Stacking Sequence on the Interlaminar Stress Field at Free Edges of Composite Laminates
,”
30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference: A Collection of Technical Papers
, Pt. 4, pp.
2089
2097
.
47.
Webber
,
J. P. H.
, and
Morton
,
S. K.
, 1993, “
An Analytical Solution for the Thermal Stresses at the Free Edges of Laminated Plates
,”
Compos. Sci. Technol.
0266-3538,
46
, pp.
175
185
.
48.
Morton
,
S. K.
, and
Webber
,
J. P. H.
, 1993, “
Interlaminar Failure Due to Mechanical and Thermal Stresses at the Free Edges of Laminated Plates
,”
Compos. Sci. Technol.
0266-3538,
47
, pp.
1
13
.
49.
Rose
,
C. A.
, and
Herakovich
,
C. T.
, 1993, “
An Approximate Solution for Interlaminar Stresses in Composite Laminates
,”
Composites Eng.
0961-9526,
3
, pp.
271
285
.
50.
Lin
,
C. C.
,
Hsu
,
C. Y.
, and
Ko
,
C. C.
, 1995, “
Interlaminar Stresses in General Laminates With Straight Free Edges
,”
AIAA J.
0001-1452,
33
, pp.
1471
1476
.
51.
Stiftinger
,
M. A.
, 1996,
Semi-Analytical Finite Element Formulations for Layered Composite Shells With Consideration of Edge Effects
,
VDI
,
Düsseldorf
.
52.
Amrutharaj
,
G. S.
,
Lam
,
K. Y.
, and
Cotterell
,
B.
, 1996, “
Delaminations at the Free Edge of a Composite Laminate
,”
Composites, Part B
1359-8368,
27B
, pp.
475
483
.
53.
Whitney
,
J. M.
, 1973, “
Free-Edge Effects in the Characterization of Composite Materials
,”
ASTM, STP 521
,
American Society for Testing and Materials
,
Philadelphia
, pp.
167
180
.
54.
Tang
,
S.
, 1975, “
A Boundary Layer Theory—Part, I: Laminated Composites in Plane Stress
,”
J. Compos. Mater.
0021-9983,
9
, pp.
33
41
.
55.
Tang
,
S.
, and
Levy
,
A.
, 1975, “
A Boundary Layer Theory—Part II: Extension of Laminated Finite Strip
,”
J. Compos. Mater.
0021-9983,
9
, pp.
42
52
.
56.
Pagano
,
N. J.
, 1978, “
Stress Fields in Composite Laminates
,”
Int. J. Solids Struct.
0020-7683,
14
, pp.
385
400
.
57.
Pagano
,
N. J.
, 1978, “
Free Edge Stress Fields in Composite Laminates
,”
Int. J. Solids Struct.
0020-7683,
14
, pp.
401
406
.
58.
Reissner
,
E.
, 1950, “
On a Variational Theorem in Elasticity
,”
J. Math. Phys.
0022-2488,
29
, pp.
90
95
.
59.
Pagano
,
N. J.
, and
Soni
,
S. R.
, 1983, “
Global-Local Laminate Variational Model
,”
Int. J. Solids Struct.
0020-7683,
3
, pp.
207
228
.
60.
Soni
,
S. R.
, and
Pagano
,
N. J.
, 1983, “
Elastic Response of Composite Laminates
,”
Mechanics of Composite Materials: Recent Advances
,
Hashin
,
Z.
, and
Herakovich
,
C. T.
, eds.,
Pergamon
,
New York
, pp.
227
242
.
61.
Pagano
,
N. J.
, and
Soni
,
S. R.
, 1989, “
Models for Studying Free-Edge Effects
,”
Interlaminar Response of Composite Materials Composite Materials Series
Vol.
5
,
Pagano
,
N. J.
, ed.,
Elsevier
,
Amsterdam
, pp.
1
68
.
62.
Whitney
,
J. M.
, and
Sun
,
C. T.
, 1973, “
A Higher Order Theory for Extensional Motion of Laminated Composites
,”
J. Sound Vib.
0022-460X,
30
, pp.
85
97
.
63.
Soni
,
S. R.
, 1982, “
Stress and Strength Analysis of Composite Laminates at Delamination
,”
Proceedings of the International Conference on Composite Materials
,
Tokyo
, pp.
251
260
.
64.
Johnson
,
E. R.
, and
Kemp
,
B. L.
, 1985, “
Modeling the Stress Field in Laminated Composite Plates Near Discontinuities
,”
Compos. Struct.
0263-8223,
3
, pp.
145
166
.
65.
Diaz Diaz
,
A.
,
Caron
,
J. F.
, and
Carreira
,
R. P.
, 2002, “
Software Application for Evaluating Interfacial Stresses in Inelastic Symmetrical Laminates With Free Edges
,”
Compos. Struct.
0263-8223,
58
, pp.
195
208
.
66.
Harrison
,
P. N.
, and
Johnson
,
E. R.
, 1996, “
A Mixed Variational Formulation for Interlaminar Stresses in Thickness-Tapered Composite Laminates
,”
Int. J. Solids Struct.
0020-7683,
33
, pp.
2377
2399
.
67.
Pagano
,
N. J.
,
Schoeppner
,
G. A.
,
Kim
,
R.
, and
Abrams
,
F. L.
, 1998, “
Steady-State Cracking and Edge Effects in Thermo-Mechanical Transverse Cracking of Cross-Ply Laminates
,”
Compos. Sci. Technol.
0266-3538,
58
, pp.
1811
1825
.
68.
Bar-Yoseph
,
P.
, and
Pian
,
T. H. H.
, 1981, “
Calculation of Interlaminar Stress Concentration in Composite Laminates
,”
J. Compos. Mater.
0021-9983,
15
, pp.
225
239
.
69.
Bar-Yoseph
,
P.
, 1983, “
On the Accuracy of Interlaminar Stress Calculation in Laminated Plates
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
36
, pp.
309
329
.
70.
Kassapoglou
,
C.
, 1990, “
Determination of Interlaminar Stresses in Composite Laminates Under Combined Loads
,”
J. Reinf. Plast. Compos.
0731-6844,
9
, pp.
33
58
.
71.
Bhat
,
A. V.
, and
Lagace
,
P. A.
, 1994, “
An Analytical Method for the Evaluation of Interlaminar Stresses Due to Material Discontinuities
,”
J. Compos. Mater.
0021-9983,
28
, pp.
190
210
.
72.
Yin
,
W. L.
, 1994, “
Free-Edge Effects in Anisotropic Laminates Under Extension, Bending and Twisting, Part I: A Stress-Function-Based Variational Approach
,”
ASME J. Appl. Mech.
0021-8936,
61
, pp.
410
415
.
73.
Yin
,
W. L.
, 1994, “
Free-Edge Effects in Anisotropic Laminates Under Extension, Bending and Twisting, Part II: Eigenfunction Analysis and the Results for Symmetric Laminates
,”
ASME J. Appl. Mech.
0021-8936,
61
, pp.
416
421
.
74.
Yin
,
W. L.
, 1997, “
The Effect of Temperature Gradient on the Free-Edge Interlaminar Stresses in Multi-Layered Structures
,”
J. Compos. Mater.
0021-9983,
31
, pp.
2460
2477
.
75.
Yin
,
W. L.
, 1994, “
Simple Solutions of the Free-Edge Stresses in Composite Laminates Under Thermal and Mechanical Loads
,”
J. Compos. Mater.
0021-9983,
28
, pp.
573
586
.
76.
Kim
,
T.
, and
Atluri
,
S. N.
, 1994, “
Interlaminar Stresses in Composite Laminates Under Out-Of-Plane Shear/Bending
,”
AIAA J.
0001-1452,
32
, pp.
1700
1708
.
77.
Kim
,
T.
, and
Atluri
,
S. N.
, 1995, “
Analysis of Edge Stresses in Composite Laminates Under Combined Thermo-Mechanical Loading, Using a Complementary Energy Approach
,”
Comput. Mech.
0178-7675,
16
, pp.
83
97
.
78.
Zhang
,
C.
, and
Yeh
,
H. Y.
, 1998, “
A Variational Approach for Straight Edge Effect Stresses in Laminated Composites
,”
Compos. Struct.
0263-8223,
43
, pp.
243
254
.
79.
Cho
,
M.
, and
Kim
,
H. S.
, 1998, “
Iterative Free Edge Stress Analysis of Composite Laminates Under Extension, Bending, Twisting and Thermal Loadings
,”
Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
,
Long Beach
, pp.
1545
1555
.
80.
Cho
,
M.
, and
Kim
,
H. S.
, 2000, “
Iterative Free-Edge Stress Analysis of Composite Laminates Under Extension, Bending, Twisting and Thermal Loadings
,”
Int. J. Solids Struct.
0020-7683,
37
, pp.
435
459
.
81.
Kim
,
H. S.
,
Cho
,
M.
, and
Kim
,
G. I.
, 2000, “
Free-Edge Strength Analysis in Composite Laminates by the Extended Kantorovich Method
,”
Compos. Struct.
0263-8223,
49
, pp.
229
235
.
82.
Whitney
,
J. M.
, and
Nuismer
,
R. J.
, 1974, “
Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations
,”
J. Compos. Mater.
0021-9983,
8
, pp.
253
265
.
83.
Hein
,
V. L.
, and
Erdogan
,
F.
, 1971, “
Stress Singularities in a Two-Material Wedge
,”
Int. J. Fract. Mech.
0020-7268,
7
, pp.
317
330
.
84.
Bogy
,
D. B.
, 1972, “
The Plane Solution for Anisotropic Elastic Wedges Under Normal and Shear Loading
,”
ASME J. Appl. Mech.
0021-8936,
39
, pp.
1103
1109
.
85.
Kuo
,
M. C.
, and
Bogy
,
D. B.
, 1974, “
Plane Solutions for the Displacement and Traction-Displacement Problems for Anisotropic Elastic Wedges
,”
ASME J. Appl. Mech.
0021-8936,
41
, pp.
197
202
.
86.
Wang
,
S. S.
, and
Choi
,
I.
, 1980, “
Boundary-Layer Hygroscopic Stresses in Angle-Ply Composite Laminates
,”
Proceedings of the 21st AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference
,
Seattle
, pp.
307
317
.
87.
Wang
,
S. S.
, and
Choi
,
I.
, 1982, “
Boundary-Layer Effects in Composite Laminates, Part 1: Free-Edge Stress Singularities
,”
ASME J. Appl. Mech.
0021-8936,
49
, pp.
541
548
.
88.
Wang
,
S. S.
, and
Choi
,
I.
, 1982, “
Boundary-Layer Effects in Composite Laminates, Part 2: Free-Edge Stress Solutions and Basic Characteristics
,”
ASME J. Appl. Mech.
0021-8936,
49
, pp.
549
560
.
89.
Wang
,
S. S.
, and
Choi
,
I.
, 1982, “
Influence of Fiber Orientation and Ply Thickness on Hygroscopic Boundary-Layer Stresses in Angle-Ply Composite Laminates
,”
J. Compos. Mater.
0021-9983,
16
, pp.
244
258
.
90.
Wang
,
S. S.
, 1981, “
Edge Delaminations in Angle-Ply Composite Laminates
,”
Proceedings of the 22nd AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference
,
Atlanta
, pp.
473
484
.
91.
Wang
,
S. S.
, 1983, “
Elasticity Solutions for a Class of Composite Laminate Problems With Stress Singularities
,”
Mechanics of Composite Materials: Recent Advances
,
Hashin
,
Z.
, and
Herakovich
,
C. T.
, eds.,
Pergamon
,
New York
, pp.
259
281
.
92.
Stroh
,
A. N.
, 1962, “
Steady State Problems in Anisotropic Elasticity
,”
J. Math. Phys.
0022-2488,
41
, pp.
77
103
.
93.
Ting
,
T. C. T.
, and
Chou
,
S. C.
, 1981, “
Edge Singularities in Anisotropic Composites
,”
Int. J. Solids Struct.
0020-7683,
17
, pp.
1057
1068
.
94.
Zwiers
,
R. I.
,
Ting
,
T. C. T.
, and
Spilker
,
R. L.
, 1982, “
On the Logarithmic Singularity of Free-Edge Stress in Laminated Composites Under Uniform Extension
,”
ASME J. Appl. Mech.
0021-8936,
49
, pp.
561
569
.
95.
Dempsey
,
J. P.
, and
Sinclair
,
G. B.
, 1981, “
On the Singular Behavior at the Vertex of a Bi-Material Wedge
,”
J. Elast.
0374-3535,
11
, pp.
317
327
.
96.
Delale
,
F.
, 1984, “
Stress Singularities in Bonded Anisotropic Materials
,”
Int. J. Solids Struct.
0020-7683,
20
, pp.
31
40
.
97.
Stolarski
,
H. K.
, and
Chiang
,
M. Y. M.
, 1989, “
On the Significance of the Logarithmic Term in the Free Edge Stress Singularity of Composite Laminates
,”
Int. J. Solids Struct.
0020-7683,
25
, pp.
75
93
.
98.
Yang
,
Y. Y.
, 1992,
Spannungssingularitäten in Zweistoffverbunden bei Mechanischer und Thermischer Belastung
,
VDI
,
Düsseldorf
.
99.
Ding
,
S.
, and
Kumosa
,
M.
, 1994, “
Singular Stress Behaviour at an Adhesive Interface Corner
,”
Eng. Fract. Mech.
0013-7944,
47
, pp.
503
519
.
100.
Williams
,
M. L.
, 1952, “
Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension
,”
ASME J. Appl. Mech.
0021-8936,
19
, pp.
526
528
.
101.
Kim
,
T. W.
, and
Im
,
S.
, 1995, “
Boundary Layers in Wedges of Laminated Composite Strips Under Generalized Plane Deformation-Part I: Asymptotic Solutions
,”
Int. J. Solids Struct.
0020-7683,
32
, pp.
609
628
.
102.
Kim
,
T. W.
, and
Im
,
S.
, 1995, “
Boundary Layers in Wedges of Laminated Composite Strips Under Generalized Plane Deformation-Part II: Complete Numerical Solutions
,”
Int. J. Solids Struct.
0020-7683,
32
, pp.
629
645
.
103.
Chaudhuri
,
R. A.
, and
Xie
,
M.
, 2000, “
A. Novel Eigenfunction Expansion Solution for Three-Dimensional Crack Problems
,”
Compos. Sci. Technol.
0266-3538,
60
, pp.
2565
2580
.
104.
Chaudhuri
,
R. A.
, and
Xie
,
M.
, 1998, “
Free-Edge Stress Singularity in a Bimaterial Laminate
,”
Compos. Struct.
0263-8223,
40
, pp.
129
136
.
105.
Xie
,
M.
, and
Chaudhuri
,
R. A.
, 1998, “
Three-Dimensional Stress Singularity at a Bimaterial Interface Crack Front
,”
Compos. Struct.
0263-8223,
40
, pp.
137
147
.
106.
Xie
,
M.
, and
Chaudhuri
,
R. A.
, 2001, “
Three-Dimensional Asymptotic Stress Field at the Front of a Bimaterial Wedge of Symmetric Geometry Under Antiplane Shear Loading
,”
Compos. Struct.
0263-8223,
54
, pp.
509
514
.
107.
Chiu
,
J. S. H.
, and
Chaudhuri
,
R. A.
, 2002, “
Three-Dimensional Asymptotic Stress Field at the Front of an Unsymmetric Bimaterial Pie-Shaped Wedge Under Antiplane Shear Loading
,”
Compos. Struct.
0263-8223,
58
, pp.
129
137
.
108.
Müller
,
A.
,
Hohe
,
J.
, and
Becker
,
W.
, 2002, “
A Closed-Form Analysis of Material and Geometry Effects on Stress Singularities at Unsymmetric Bimaterial Notches
,”
Proceedings of the 73rd Annual Meeting of the GAMM—Gesellschaft für Angewandte Mathematik und Mechanik e. V.
, Augsburg,
Germany
,
210
211
.
109.
Müller
,
A.
,
Hohe
,
J.
, and
Becker
,
W.
, 2002, “
Material-Und Geometrieabhängigkeit der Spannungssingularitäten an Bimaterialkerben
,”
DVM-Bericht 234 Fortschritte der Bruch- und Schädigungsmechanik
, Deutscher Verband Für Materialforschung und—Prüfung, e. V., Berlin, pp.
109
118
.
110.
Müller
,
A.
,
Hohe
,
J.
,
Goswami
,
S.
, and
Becker
,
W.
, 2003, “
Thermal Effects on Fracture Initiation at Bimaterial Notches
,”
Proceedings of the TS2003-Fifth International Congress on Thermal Stresses and Related Topics
,
Blacksburg
, pp.
MA
-7-4-1–MA-7-4-
4
.
111.
Muskhelishwili
,
N. I.
, 1975,
Some Basic Problems of the Mathematical Theory of Elasticity
,
Noordhoff
,
Leyden
.
112.
Barsoum
,
R. S.
, 1988, “
Theoretical Basis of the Finite Element Iterative Method for the Eigenvalue Problem in Stationary Cracks
,”
Int. J. Numer. Methods Eng.
0029-5981,
26
, pp.
531
539
.
113.
Barsoum
,
R. S.
, 1990, “
Asymptotic Fields at Interfaces Using the Finite Element Iterative Method
,”
Comput. Struct.
0045-7949,
35
, pp.
285
292
.
114.
Gu
,
L.
, and
Belytschko
,
T.
, 1994, “
A. Numerical Study of Stress Singularities in a Two-Material Wedge
,”
Int. J. Solids Struct.
0020-7683,
31
, pp.
865
889
.
115.
Pageau
,
S. S.
,
Joseph
,
P. F.
, and
Biggers
,
S. B.
, 1995, “
Finite Element Analysis of Anisotropic Materials with Singular Inplane Stress Fields
,”
Int. J. Solids Struct.
0020-7683,
32
, pp.
571
591
.
116.
Pageau
,
S. S.
, and
Biggers
,
S. B.
, 1996, “
A. Finite Element Approach to Three-Dimensional Singular Stress States in Anisotropic Multi-Material Wedges and Junctions
,”
Int. J. Solids Struct.
0020-7683,
33
, pp.
33
47
.
117.
Zhang
,
N.
, and
Joseph
,
P. F.
, 1998, “
A. Nonlinear Finite Element Eigenanalysis of Singular Plane Stress Fields in Bimaterial Wedges Including Complex Eigenvalues
,”
Int. J. Fract.
0376-9429,
90
, pp.
175
207
.
118.
Zhang
,
N.
, and
Joseph
,
P. F.
, 1998, “
A. Nonlinear Finite Element Eigenanalysis of Singular Stress Fields in Bimaterial Wedges for Plane Strain
,”
Int. J. Fract.
0376-9429,
94
, pp.
299
319
.
119.
Yosibash
,
Z.
, and
Szabo
,
B.
, 1995, “
Numerical Analysis of Singularities in Two-Dimensions Part 1: Computation of Eigenpairs
,”
Int. J. Numer. Methods Eng.
0029-5981,
38
, pp.
2055
2082
.
120.
Szabo
,
B.
, and
Yosibash
,
Z.
, 1996, “
Numerical Analysis of Singularities in Two-Dimensions Part 2: Computation of Generalized Flux/Stress Intensity Factors
,”
Int. J. Numer. Methods Eng.
0029-5981,
39
, pp.
409
434
.
121.
Yosibash
,
Z.
, 1997, “
Computing Edge Singularities in Elastic Anisotropic Three-Dimensional Domains
,”
Int. J. Fract.
0376-9429,
86
, pp.
221
245
.
122.
Yosibash
,
Z.
, 1997, “
Numerical Analysis of Edge Singularities in Three-Dimensional Elasticity
,”
Int. J. Numer. Methods Eng.
0029-5981,
40
, pp.
4611
4632
.
123.
Yosibash
,
Z.
, 1997, “
On Solutions of Two-Dimensional Linear Elastostatic and Heat-Transfer Problems in the Vicinity of Singular Points
,”
Int. J. Solids Struct.
0020-7683,
34
, pp.
243
274
.
124.
Bazant
,
Z. P.
, and
Estenssoro
,
L. F.
, 1979, “
Surface Singularity and Crack Propagation
,”
Int. J. Solids Struct.
0020-7683,
15
, pp.
405
426
.
125.
Yamada
,
Y.
, and
Okumara
,
H.
, 1981, “
Analysis of Local Stress in Composite Materials by the 3D Finite Element
,”
Composite Materials: Proceedings of the Japan-U. S. Conference
,
Tokyo
, pp.
55
64
.
126.
Yeh
,
J. R.
, and
Tadjbakhsh
,
I. G.
, 1986, “
Stress Singularity in Composite Laminates by Finite Element Method
,”
J. Compos. Mater.
0021-9983,
20
, pp.
347
364
.
127.
Somaratna
,
N.
, and
Ting
,
T. C. T.
, 1986, “
Three-Dimensional Stress Singularities in Anisotropic Materials and Composites
,”
Int. J. Eng. Sci.
0020-7225,
24
, pp.
1115
1134
.
128.
Wolf
,
J. P.
, and
Song
,
C.
, 1996,
Finite-Element Modelling of Unbounded Media
,
Wiley
,
Chichester
.
129.
Wolf
,
J. P.
, and
Song
,
C.
, 1998, “
The Scaled Boundary Finite-Element Method—A Fundamental-Solution-Less Boundary Element Method
,”
Proceedings of the Fourth World Congress on Computational Mechanics
, Buenos Aires,
Argentina
, pp.
1
20
.
130.
Song
,
C.
, and
Wolf
,
J. P.
, 2002, “
Semi-Analytical Representation of Stress Singularities as Occurring in Cracks in Anisotropic Multi-Materials With the Scaled Boundary Finite-Element Method
,”
Comput. Struct.
0045-7949,
80
, pp.
183
197
.
131.
Raju
,
I. S.
, and
Crews
,
J. H.
, 1981, “
Interlaminar Stress Singularities at a Straight Free Edge in Composite Laminates
,”
Comput. Struct.
0045-7949,
14
, pp.
21
28
.
132.
Anquez
,
L.
, 1986, “
A. Numerical Analysis of Singular Stress Fields at the Free Edge of Layered Composites
,”
Brittle Matrix Composite
,
Brandt
,
A. M.
, and
Marshall
,
I. H.
, eds.,
Elsevier Applied Science
,
London
, Vol.
1
, pp.
287
303
.
133.
Dempsey
,
J. P.
, and
Sinclair
,
G. B.
, (1979), “
On the Stress Singularities in the Plane Elasticity of the Composite Wedge
,”
J. Elast.
0374-3535,
9
, pp.
373
391
.
134.
Davet
,
J. L.
, and
Destuynder
,
P.
, 1986, “
Free-Edge Stress Concentration in Composite Laminates: A Boundary Layer Approach
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
59
, pp.
129
140
.
135.
Rösel
,
R.
, 1987, “
On the Wedge/Notch Eigenvalues
,”
Int. J. Fract.
0376-9429,
33
, pp.
61
71
.
136.
Bar-Yoseph
,
P.
, and
Avrashi
,
J.
, 1988, “
On the Nature of the Free Edge Stress Singularity in Composite Laminated Plates
,”
Int. J. Numer. Methods Eng.
0029-5981,
26
, pp.
1507
1523
.
137.
Reedy
,
E. D.
, 1989, “
On Free-Edge Interlaminar Stress Distributions
,”
Compos. Sci. Technol.
0266-3538,
34
, pp.
259
266
.
138.
Christensen
,
R. M.
, and
DeTeresa
,
S. J.
, 1992, “
Elimination/Minimization of Edge-Induced Stress Singularities in Fiber Composite Laminates
,”
Int. J. Solids Struct.
0020-7683,
29
, pp.
1221
1231
.
139.
Akisanya
,
A. R.
, and
Fleck
,
N. A.
, 1997, “
Interfacial Cracking From the Free-Edge of a Long Bi-Material Strip
,”
Int. J. Solids Struct.
0020-7683,
34
, pp.
1645
1665
.
140.
Tan
,
M. A.
, and
Meguid
,
S. A.
, 1997, “
Analysis of Bimaterial Wedges Using a New Singular Finite Element
,”
Int. J. Fract.
0376-9429,
88
, pp.
373
391
.
141.
Berger
,
J. R.
,
Martin
,
P. A.
, and
Lien
,
J. P.
, 1998, “
Reduction of Free-Edge Stress Intensities in Anisotropic Bimaterials
,”
Int. J. Fract.
0376-9429,
91
, pp.
165
177
.
142.
Chimani
,
C. M.
,
Böhm
,
H. J.
, and
Rammerstorfer
,
F. G.
, 1998, “
On Interface Edge Singularities in Layered Composites
,”
ZAMM
0044-2267,
78
, pp.
49
52
.
143.
Rahman
,
A.
, and
Lau
,
A. C. W.
, 1998, “
Singular Stress Fields in Interfacial Notches of Hybrid Metal Matrix Composites
,”
Composites, Part B
1359-8368,
29B
, pp.
763
768
.
144.
Joseph
,
P. F.
, and
Zhang
,
N.
, 1998, “
Multiple Root Solutions, Wedge Paradoxes and Singular Stress States That are not Variable-Separable
,”
Compos. Sci. Technol.
0266-3538,
58
, pp.
1839
1859
.
145.
Lee
,
S. S.
, 1998, “
Boundary Element Analysis of the Stress Singularity at the Interface Corner of Viscoelastic Adhesive Layers
,”
Int. J. Solids Struct.
0020-7683,
35
, pp.
1385
1394
.
146.
Yang
,
Y. Y.
, 1998, “
Asymptotic Description of the Logarithmic Singular Stress Field and Its Application
,”
Int. J. Solids Struct.
0020-7683,
35
, pp.
3917
3933
.
147.
Chaudhuri
,
R. A.
, and
Xie
,
M.
, 2000, “
A. Tale of Two Saints: St. Venant and ‘St. Nick’—Does St. Venant’s Principle Apply to Bi-Material Straight-Edge and Wedge-Singularity Problems?
,”
Compos. Sci. Technol.
0266-3538,
60
, pp.
2503
2515
.
148.
Glushkov
,
E. V.
,
Glushkova
,
N. V.
,
Munz
,
D.
, and
Yang
,
Y. Y.
, 2000, “
Analytical Solution for Bonded Wedges Under Thermal Stresses
,”
Int. J. Fract.
0376-9429,
106
, pp.
321
339
.
149.
Chue
,
C. H.
,
Tseng
,
C. H.
, and
Liu
,
C. I.
, 2001, “
On Stress Singularities in an Anisotropic Wedge for Various Boundary Conditions
,”
Compos. Struct.
0263-8223,
54
, pp.
87
102
.
150.
Chue
,
C. H.
,
Chen
,
T. H.
, and
Lee
,
H. T.
, 2002, “
A. General Solution on Stress Singularities in the Junction of Two Anisotropic Materials
,”
Compos. Struct.
0263-8223,
55
, pp.
81
93
.
151.
Chue
,
C. H.
, and
Liu
,
C. I.
, 2002, “
Disappearance of Free-Edge Stress Singularity in Composite Laminates
,”
Compos. Struct.
0263-8223,
56
, pp.
111
129
.
152.
Chue
,
C. H.
, and
Liu
,
C. I.
, 2002, “
Stress Singularities in a Bimaterial Anisotropic Wedge With Arbitrary Fiber Orientation
,”
Compos. Struct.
0263-8223,
58
, pp.
49
56
.
153.
Chue
,
C. H.
, and
Weng
,
S. M.
, 2002, “
Stress Singularities in Anisotropic Three-Material Wedges and Junctions With Applications
,”
Compos. Struct.
0263-8223,
58
, pp.
443
456
.
154.
Pipes
,
R. B.
, 1972,
Solution of Certain Problems in the Theory of Elasticity for Laminated Anisotropic Systems
,
University of Texas
,
Arlington
.
155.
Pipes
,
R. B.
, 1980, “
Boundary Layer Effects in Composite Laminates
,”
Fibre Sci. Technol.
0015-0568,
13
, pp.
49
71
.
156.
Altus
,
E.
,
Rotem
,
A.
, and
Shmueli
,
M.
, 1980, “
Free Edge Effect in Angle Ply Laminates: A New Three Dimensional Finite Difference Solution
,”
J. Compos. Mater.
0021-9983,
14
, pp.
21
30
.
157.
Hong
,
C. S.
, and
Kim
,
K. S.
, 1982, “
An Analysis of Free-Edge Delamination in Laminated Composite Under Uniform Axial Strain
,”
Progress in Science and Engineering of Composites, Proceedings of the International Conference on Composite Materials
,
Tokyo
, pp.
261
268
.
158.
Bauld
,
N. R.
,
Goree
,
J. G.
, and
Tzeng
,
L. S.
, 1985, “
A. Comparison of Finite-Difference and Finite-Element Methods for Calculating Free Edge Stresses in Composites
,”
Comput. Struct.
0045-7949,
20
, pp.
897
914
.
159.
Isakson
,
G.
, and
Levy
,
A.
, 1971, “
Finite-Element Analysis of Interlaminar Shear in Fibrous Composites
,”
J. Compos. Mater.
0021-9983,
5
, pp.
273
276
.
160.
Wang
,
A. S. D.
, and
Crossman
,
F. W.
, 1976, “
Calculation of Edge Stresses in Multi-Layer Laminates by Sub-Structuring
,”
J. Compos. Mater.
0021-9983,
12
, pp.
76
83
.
161.
Wang
,
A. S. D.
, and
Crossman
,
F. W.
, 1977, “
Some New Results on Edge Effect in Symmetric Composite Laminates
,”
J. Compos. Mater.
0021-9983,
11
, pp.
92
106
.
162.
Wang
,
A. S. D.
, and
Crossman
,
F. W.
, 1977, “
Edge Effects on Thermally Induced Stresses in Composite Laminates
,”
J. Compos. Mater.
0021-9983,
11
, pp.
300
312
.
163.
Crossman
,
F. W.
, and
Wang
,
A. S. D.
, 1978, “
Stress Field Induced by Transient Moisture Sorption in Finite-Width Composite Laminates
,”
J. Compos. Mater.
0021-9983,
12
, pp.
2
18
.
164.
Whitcomb
,
J. D.
,
Raju
,
I. S.
, and
Goree
,
J. G.
, 1982, “
Reliability of the Finite Element Method for Calculating Free Edge Stresses in Composite Laminates
,”
Comput. Struct.
0045-7949,
15
, pp.
23
37
.
165.
Rohwer
,
K.
, 1982, “
On the Determination of Edge Stresses in Layered Composites
,”
Nucl. Eng. Des.
0029-5493,
70
, pp.
57
65
.
166.
Rohwer
,
K.
, 1982,
Stresses and Deformations in Laminated Test Specimens of Carbon Fiber Reinforced Composites
, DFVLR, Institut für Strukturmechanik, Braunschweig.
167.
Rohwer
,
K.
, 1985, “
Einsatz Von Finiten Elementen zur Berechnung von Faserverbundstrukturen
,”
Leichtbau mit Kohlenstofffaserverstärkten Kunststoffen
,
G.
Niederstadt
,
J.
Block
,
B.
Geier
,
K.
Rohwer
, and
R.
Weiß
, eds.,
Expert
,
Sindelfingen
,
160
210
.
168.
Whitcomb
,
J. D.
, and
Raju
,
I. S.
, (1983), “
Superposition Method for Analysis of Free-Edge Stresses
,”
J. Compos. Mater.
0021-9983,
17
, pp.
492
507
.
169.
Wu
,
C. M. L.
, 1987, “
Nonlinear Analysis of Edge Effects in Angle-Ply Laminates
,”
Comput. Struct.
0045-7949,
25
, pp.
787
798
.
170.
Wu
,
C. M. L.
, 1990, “
Nonlinear Thermal and Mechanical Analysis of Edge Effects in Angle-Ply Laminates
,”
Comput. Struct.
0045-7949,
35
, pp.
705
717
.
171.
Wu
,
C. M. L.
, 1992, “
Elasto-Plastic Analysis of Edge Effects in Metal Matrix Angle-Ply Laminates
,”
Comput. Struct.
0045-7949,
45
, pp.
273
280
.
172.
Ye
,
L.
, 1990, “
Some Characteristics of Distributions of Free-Edge Interlaminar Stresses in Composite Laminates
,”
Int. J. Solids Struct.
0020-7683,
26
, pp.
331
351
.
173.
Frick
,
A.
, and
Klamser
,
H.
, 1990,
Untersuchung der Verschiebungs- und Spannungsverteilungen an Unbelasteten Rändern Multidirektionaler Laminate
,
VDI
,
Düsseldorf
.
174.
Hwang
,
S. J.
, and
Gibson
,
R. F.
, 1991, “
The Effects of Three-Dimensional States of Stress on Damping of Laminated Composites
,”
Compos. Sci. Technol.
0266-3538,
41
, pp.
379
393
.
175.
Yi
,
S.
, 1993, “
Thermoviscoelastic Analysis of Delamination Onset and Free Edge Response in Laminated Composites
,”
AIAA J.
0001-1452,
31
, pp.
2320
2328
.
176.
Lessard
,
L. B.
,
Schmidt
,
A. S.
, and
Shokrieh
,
M. M.
, 1996, “
Three-Dimensional Stress Analysis of Free-Edge Effects in a Simple Composite Cross-Ply Plate
,”
Int. J. Solids Struct.
0020-7683,
33
, pp.
2243
2259
.
177.
Lindemann
,
J.
, and
Becker
,
W.
, 2000,
Optimierung von Verbundwerkstoffen unter Berücksichtigung des Laminatrandeffekts
,
Universität Siegen
,
Siegen
.
178.
Lindemann
,
J.
, and
Becker
,
W.
, 2001, “
Optimization of Composite Laminates Under Uniaxial Tension With Respect to the Free-Edge Effect
,”
ZAMM
0044-2267,
81
, pp.
S683
-
S684
.
179.
Lindemann
,
J.
, and
Becker
,
W.
, 2002, “
The Tendency for Free-Edge Delamination in Laminates and Its Minimization
,”
Compos. Sci. Technol.
0266-3538,
62
, pp.
233
242
.
180.
Weikl
,
S.
, 2002,
Quantitative Delaminationsbestimmung an Geschichteten Verbundwerkstoffen
, Karlsruhe University, Institute of Solid Mechanics, Karlsruhe.
181.
Artel
,
J.
, and
Becker
,
W.
, 2005, “
Coupled and Uncoupled Analysis of Piezoelectric Free-Edge Effect in Laminated Plates
,”
Compos. Struct.
0263-8223,
69
(
3
), pp.
329
335
.
182.
Hirai
,
T.
,
Semba
,
T.
, and
Tarui
,
M.
, 1982, “
Three-Dimensional Interlaminar Stress Distribution in Symmetric Composite Laminate
,”
Progress in Science and Engineering of Composites, Proceedings of the International Conference on Composite Materials
,
Tokyo
, pp.
243
250
.
183.
Whitcomb
,
J. D.
, and
Raju
,
I. S.
, 1985, “
Analysis of Interlaminar Stresses in Thick Composite Laminates With and Without Edge Delamination
,”
Delamination and Debonding of Materials, ASTM STP 876
,
Johnson
,
W. S.
, ed., American Society for Testing and Materials, Philadelphia,
69
94
.
184.
Sun
,
C. T.
, and
Liao
,
W. C.
, (1990), “
Analysis of Thick Section Composite Laminates Using Effective Moduli
,”
J. Compos. Mater.
0021-9983,
24
, pp.
977
993
.
185.
Joo
,
J. W.
, and
Sun
,
C. T.
, 1992, “
A. Failure Criterion for Laminates Governed by Free Edge Interlaminar Shear Stress
,”
J. Compos. Mater.
0021-9983,
26
, pp.
1510
1522
.
186.
Kress
,
G. R.
, 1993,
Analytische und Experimentelle Untersuchung zu Versagensvorgängen in Faserverbundwerkstoffen mit Besonderer Berücksichtigung der Randeffekte
,
VDI
,
Düsseldorf
.
187.
Yang
,
H. T. Y.
, and
He
,
C. C.
, 1994, “
Three-Dimensional Finite Element Analysis of Free Edge Stresses and Delamination of Composite Laminates
,”
J. Compos. Mater.
0021-9983,
28
, pp.
1394
1412
.
188.
Schipperen
,
J. H. A.
, and
Lingen
,
F. J.
, 1999, “
Validation of Two-Dimensional Calculations of Free Edge Delamination in Laminated Composites
,”
Compos. Struct.
0263-8223,
45
, pp.
233
240
.
189.
Tong
,
P.
, and
Pian
,
T. H. H.
, 1973, “
On the Convergence of the Finite Element Method for Problems With Singularity
,”
Int. J. Solids Struct.
0020-7683,
9
, pp.
313
321
.
190.
Rybicki
,
E. F.
, 1971, “
Approximate Three-Dimensional Solutions for Symmetric Laminates Under Inplane Loading
,”
J. Compos. Mater.
0021-9983,
5
, pp.
354
360
.
191.
Spilker
,
R. L.
, 1980, “
A Traction-Free-Edge Hybrid-Stress Element for the Analysis of Edge Effects in Cross-Ply Laminates
,”
Comput. Struct.
0045-7949,
12
, pp.
167
179
.
192.
Spilker
,
R. L.
, and
Chou
,
S. C.
, 1980, “
Edge Effects in Symmetric Composite Laminates: Importance of Satisfying the Traction Free Edge Condition
,”
J. Compos. Mater.
0021-9983,
14
, pp.
2
20
.
193.
Wang
,
S. S.
, and
Yuan
,
F. G.
, 1983, “
A Singular Hybrid Finite Element Analysis of Boundary-Layer Stresses in Composite Laminates
,”
Int. J. Solids Struct.
0020-7683,
19
, pp.
825
837
.
194.
Wang
,
S. S.
, and
Yuan
,
F. G.
, 1983, “
A Hybrid Finite Element Approach to Composite Laminate Elasticity Problems With Singularities
,”
ASME J. Appl. Mech.
0021-8936,
50
, pp.
835
844
.
195.
Bar-Yoseph
,
P.
, and
Avrashi
,
J.
, 1986, “
New Variational-Asymptotic Formulations for Interlaminar Stress Analysis in Laminated Plates
,”
ZAMP
0044-2275,
37
, pp.
305
321
.
196.
Bar-Yoseph
,
P.
, and
Ben-David
,
D.
, 1995, “
Free-Edge Effects in Unsymmetrically Laminated Composite Plates
,”
Compos. Struct.
0263-8223,
30
, pp.
13
23
.
197.
Chang
,
C. C.
,
Sandhu
,
R. S.
,
Sierakowski
,
R. L.
, and
Wolfe
,
W. E.
, 1988, “
Continuous Stress Finite Element Analysis of a Free-Edge Delamination Specimen
,”
Comput. Struct.
0045-7949,
29
, pp.
783
793
.
198.
Wörtler
,
M.
, 1989,
Interlaminare Spannungskonzentrationen in Faserverbundwerkstoffen
, VDI, Düsseldorf.
199.
Gruttmann
,
F.
, and
Wagner
,
W.
, 1994, “
On the Numerical Analysis of Local Effects in Composite Structures
,”
Compos. Struct.
0263-8223,
29
, pp.
1
12
.
200.
Icardi
,
U.
, and
Bertetto
,
A. M.
, 1995, “
An Evaluation of the Influence of Geometry and of Material Properties at Free Edges and at Corners of Composite Laminates
,”
Comput. Struct.
0045-7949,
57
, pp.
555
571
.
201.
Robbins
,
D. H.
, and
Reddy
,
J. N.
, 1996, “
Variable Kinematic Modelling of Laminated Composite Plates
,”
Int. J. Numer. Methods Eng.
0029-5981,
39
, pp.
2283
2317
.
202.
Gaudenzi
,
P.
,
Mannini
,
A.
, and
Carbonaro
,
R.
, 1998, “
Multi-Layer Higher-Order Finite Elements for the Analysis of Free-Edge Stresses in Composite Laminates
,”
Int. J. Numer. Methods Eng.
0029-5981,
41
, pp.
851
873
.
203.
Yi
,
S.
,
Ahmad
,
M. F.
, and
Hilton
,
H. H.
, 1998, “
Nonlinear Viscoelastic Stress Singularities Near Free Edges of Unsymmetrically Laminated Composites
,”
Int. J. Solids Struct.
0020-7683,
35
, pp.
3221
3237
.
204.
Phillips
,
E. A.
,
Herakovich
,
C. T.
, and
Graham
,
L. L.
, 2001, “
Damage Development in Composites With Large Stress Gradients
,”
Compos. Sci. Technol.
0266-3538,
61
, pp.
2169
2182
.
205.
Mannini
,
A.
, and
Gaudenzi
,
P.
, 2003, “
Multi-Layer Higher-Order Finite Elements for the Analysis of Free-Edge Stresses in Piezoelectric Actuated Laminates
,”
Compos. Struct.
0263-8223,
61
, pp.
271
278
.
206.
Wolf
,
J. P.
, and
Song
,
C.
, 2000, “
The Scaled Boundary Finite-Element Method-A Primer: Derivations
,”
Comput. Struct.
0045-7949,
78
, pp.
191
210
.
207.
Song
,
C.
, and
Wolf
,
J. P.
, 2000, “
The Scaled Boundary Finite-Element Method-A Primer: Solution Procedures
,”
Comput. Struct.
0045-7949,
78
, pp.
211
225
.
208.
Wolf
,
J. P.
, 2003,
The Scaled Boundary Finite Element Method
,
Wiley
,
Chichester
.
209.
Lindemann
,
J.
, and
Becker
,
W.
, 2000, “
Analysis of the Free-Edge Effect in Composite Laminates by the Boundary Finite Element Method
,”
Mech. Compos. Mater.
0191-5665,
36
, pp.
355
366
.
210.
Lindemann
,
J.
, and
Becker
,
W.
, 2001, “
The Boundary Finite Element Method for Stress Concentration Problems in Composite Laminates
,”
Proceedings of the 72nd Annual Meeting of the GAMM-Gesellschaft für Angewandte Mathematik und Mechanik e.V.
, Zürich, pp.
1
2
.
211.
Lindemann
,
J.
, and
Becker
,
W.
, 2001, “
Investigation of Stress-Concentration Problems in Composite Laminates by the Boundary Finite Element Method
,”
Proceedings of the Third International Conference Tools for Mathematical Modelling
Saint-Petersburg, pp.
49
58
.
212.
Lindemann
,
J.
, and
Becker
,
W.
, 2002, “
Free-Edge Stresses Around Holes in Laminates by the Boundary Finite-Element Method
,”
Mech. Compos. Mater.
0191-5665,
38
, pp.
407
416
.
213.
Müller
,
A.
,
Wenck
,
J.
,
Goswami
,
S.
,
Lindemann
,
J.
,
Hohe
,
J.
, and
Becker
,
W.
, 2005, “
The Boundary Finite Element Method for Predicting Directions of Cracks Emerging From Notches at Bimaterial Junctions
,”
Eng. Fract. Mech.
0013-7944,
72
(
3
), pp.
373
386
.
214.
Öry
,
H.
,
Reimerdes
,
H. G.
, and
Dieker
,
S.
, 1984, “
Berechnung von Interlaminaren Spannungen in Mehrschichtigen Faserverbundwerkstoffen mit Hilfe von Übertragungsmatrizen
,”
Z. Flugwiss. Weltraumforsch.
0342-068X,
8
, pp.
392
404
.
215.
Davi
,
G.
, 1996, “
Stress Fields in General Composite Laminates
,”
AIAA J.
0001-1452,
34
, pp.
2604
2608
.
216.
Vanderplaats
,
G. N.
, 1984,
Numerical Optimization Techniques for Engineering Design
, 3rd ed.,
McGraw-Hill
,
New York
.
217.
Kim
,
D. M.
, and
Hong
,
C. S.
, 1992, “
A Simple Sublaminate Approach to the Design of Thick Composite Laminates for Suppression of Free-Edge Delamination
,”
Compos. Sci. Technol.
0266-3538,
43
, pp.
147
158
.
218.
Kim
,
T.
, and
Atluri
,
S. N.
, 1995, “
Optimal Through-Thickness Temperature Gradients for Control of Interlaminar Stresses in Composites
,”
AIAA J.
0001-1452,
33
, pp.
730
738
.
219.
Cho
,
M.
, and
Rhee
,
S. Y.
, 2003, “
Layup Optimization Considering Free-Edge Strength and Bounded Uncertainty of Material Properties
,”
AIAA J.
0001-1452,
41
, pp.
2274
2282
.
220.
Whitney
,
J. M.
, and
Browning
,
C. E.
, 1972, “
Free-Edge Delamination of Tensile Coupons
,”
J. Compos. Mater.
0021-9983,
6
, pp.
300
303
.
221.
Pipes
,
R. B.
,
Kaminski
,
B. E.
, and
Pagano
,
N. J.
, 1973, “
Influence of the Free Edge Upon the Strength of Angle-Ply Laminates
,”
Analysis of the Test Methods for High Modulus Fibers and Composites, ASTM STP 521
,
American Society for Testing and Materials
,
Philadelphia
, pp.
218
228
.
222.
Herakovich
,
C. T.
, 1989, “
Failure Modes and Damage Accumulation in Laminated Composites With Free Edges
,”
Compos. Sci. Technol.
0266-3538,
36
, pp.
105
119
.
223.
Wang
,
A. S. D.
, 1989, “
Fracture Analysis of Interlaminar Cracking
,”
Interlaminar Response of Composite Materials
,
Composite Materials Series
Vol.
5
,
Pagano
,
N. J.
,
, ed.,
Elsevier
,
Amsterdam
, pp.
69
109
.
224.
Kim
,
R. Y.
, 1989, “
Experimental Observations of Free-Edge Delamination
,”
Interlaminar Response of Composite Materials
,
Composite Materials Series
Vol.
5
Pagano
,
N. J.
, ed.,
Elsevier
,
Amsterdam
pp.
111
160
.
225.
Whitney
,
J. M.
, 1989, “
Experimental Characterization of Delamination Fracture
,”
Interlaminar Response of Composite Materials
,
Composite Materials Series
Vol.
5
,
Pagano
,
N. J.
, ed.,
Elsevier
,
Amsterdam
pp.
161
250
.
226.
Lee
,
S. M.
, 1990, “
Failure Mechanisms of Edge Delamination of Composites
,”
J. Compos. Mater.
0021-9983,
24
, pp.
1200
1212
.
227.
Sun
,
C. T.
, and
Chu
,
G. D.
, 1991, “
Reducing Free Edge Effect on Laminate Strength by Edge Modification
,”
J. Compos. Mater.
0021-9983,
25
, pp.
142
161
.
228.
Lee
,
S.
,
Pan
,
H. M.
, and
Wolfenstine
,
J.
, 1992, “
Thermal Effective Stress Concentration Problems in Metal Composites
,”
Compos. Sci. Technol.
0266-3538,
44
, pp.
71
76
.
229.
Leguillon
,
D.
, 1999, “
A Method Based on Singularity Theory to Predict Edge Delamination of Laminates
,”
Int. J. Fract.
0376-9429,
100
, pp.
105
120
.
230.
Leguillon
,
D.
,
Marion
,
G.
,
Harry
,
R.
, and
Lecuyer
,
F.
, 2001, “
The Onset of Delamination at Stress-Free Edges in Angle-Ply Laminates-Analysis of Two Criteria
,”
Compos. Sci. Technol.
0266-3538,
61
, pp.
377
382
.
231.
Whitney
,
J. M.
, 1986, “
Stress Analysis of a Mode I Edge Delamination Specimen for Composite Materials
,”
AIAA J.
0001-1452,
24
, pp.
1163
1168
.
232.
Armanios
,
E. A.
,
Badir
,
A.
, and
Sriram
,
P.
, 1989, “
Sublaminate Analysis of Mode I Edge Delamination in Laminated Composites
,”
30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference: A Collection of Technical Papers
, Pt. 4, pp.
2109
2116
.
233.
Armanios
,
E. A.
, and
Badir
,
A. M.
, 1990, “
Hygrothermal Influence on Mode I Edge Delamination in Composites
,”
Compos. Struct.
0263-8223,
15
, pp.
323
342
.
234.
Harikumar
,
H. K.
, and
Krishna Murty
,
A. V.
, 1991, “
On Modelling of Laminates Containing Free-Edge Delaminations
,”
Compos. Sci. Technol.
0266-3538,
42
, pp.
393
411
.
235.
Daniewicz
,
D.
, and
Frantziskonis
,
G.
, 1992, “
Edge Delamination in Laminated Composites
,”
Compos. Struct.
0263-8223,
21
, pp.
141
153
.
236.
Davidson
,
B. D.
, 1994, “
Energy Release Rate Determination for Edge Delamination Under Combined In-Plane, Bending and Hygrothermal Loading. Part I-Delamination at a Single Interface
,”
J. Compos. Mater.
0021-9983,
28
, pp.
1009
1031
.
237.
Miravete
,
A.
, and
Jimenez
,
M. A.
, 2002, “
Application of the Finite Element Method to Prediction of Onset of Delamination Growth
,”
Appl. Mech. Rev.
0003-6900,
55
, pp.
89
106
.
238.
Tay
,
T.
, 2003, “
Characterization and Analysis of Delamination Fracture in Composites: An Overview of Developments From 1990 to 2001
,”
Appl. Mech. Rev.
0003-6900,
56
, pp.
1
32
.
239.
Berthelot
,
J. M.
, 2003, “
Transverse Cracking and Delamination in Cross-Ply Glass-Fiber and Carbon-Fiber Reinforced Plastic Laminates: Static and Fatigue Loading
,”
Appl. Mech. Rev.
0003-6900,
56
, pp.
111
147
.
240.
Savin
,
G. N.
, 1961,
Stress Concentrations Around Holes
,
Pergamon
,
New York
.
241.
Barker
,
R. M.
,
Dana
,
J. R.
, and
Pryor
,
C. W.
, 1974, “
Stress Concentrations Near Holes in Laminates
,”
J. Engrg. Mech. Div.
0044-7951,
100
, pp.
477
488
.
242.
Rybicki
,
E. F.
, and
Schmueser
,
D. W.
, 1978, “
The Comparison of LPT and Three-Dimensional Stress Distributions for a Laminated Plate Containing a Hole
,”
Proceedings of the Second International Conference on Composite Materials
, Toronto, pp.
376
384
.
243.
Rybicki
,
E. F.
, and
Schmueser
,
D. W.
, 1978, “
Effect of Stacking Sequence and Lay-Up Angle on Free Edge Stresses Around a Hole in a Laminated Plate Under Tension
,”
J. Compos. Mater.
0021-9983,
12
, pp.
300
313
.
244.
Nishioka
,
T.
, and
Atluri
,
S. N.
, 1982, “
Stress Analysis of Holes in Angle-Ply Laminates: An Efficient Assumed Stress ‘Special-Hole-Element’ Approach and a Simple Estimation Method
,”
Comput. Struct.
0045-7949,
15
, pp.
135
147
.
245.
Lee
,
J. D.
, 1982, “
Three Dimensional Finite Element Analysis of Damage Accumulation in Composite Laminate
,”
Comput. Struct.
0045-7949,
15
, pp.
335
350
.
246.
Carlsson
,
L.
, 1983, “
Interlaminar Stresses at a Hole in a Composite Member Subjected to In-Plane Loading
,”
J. Compos. Mater.
0021-9983,
17
, pp.
238
249
.
247.
Lucking
,
W. M.
,
Hoa
,
S. V.
, and
Sankar
,
T. S.
, 1984, “
The Effect of Geometry on Interlaminar Stresses of [0∕90]S Composite Laminates With Circular Holes
,”
J. Compos. Mater.
0021-9983,
17
, pp.
188
198
.
248.
Ericson
,
K.
,
Persson
,
M.
,
Carlsson
,
L.
, and
Gustavsson
,
A.
, 1984, “
On the Prediction of the Initiation of Delamination in a [0∕90]S Laminate With a Circular Hole
,”
J. Compos. Mater.
0021-9983,
18
, pp.
495
506
.
249.
Reimerdes
,
H. G.
, 1984,
Zur Berechnung Interlaminarer Spannungen am Rand Kreisrunder Löcher in Mehrschichtigen Laminaten
,
Aachen University
,
Aachen
.
250.
Bar-Yoseph
,
P.
, and
Avrashi
,
J.
, 1985, “
Interlaminar Stress Analysis for Laminated Plates Containing a Curvilinear Hole
,”
Comput. Struct.
0045-7949,
21
, pp.
917
932
.
251.
Hwang
,
W. C.
, and
Sun
,
C. T.
, 1988, “
Analysis of Interlaminar Stresses Near Curved Free-Edges of Laminated Composites Using Iterative Finite Element Method
,”
Comput. Struct.
0045-7949,
28
, pp.
461
467
.
252.
Gaudenzi
,
P.
,
Barboni
,
R.
, and
Mannini
,
A.
, 1995, “
A Finite Element Evaluation of Single-Layer and Multi-Layer Theories for the Analysis of Laminated Plates
,”
Compos. Struct.
0263-8223,
30
, pp.
427
440
.
253.
Barboni
,
R.
,
Carbonaro
,
R.
, and
Gaudenzi
,
P.
, 1995, “
On the Use of a Multilayer Higher-Order Theory for the Stress Analysis Around a Circular Hole of Laminates Under Tension
,”
Compos. Struct.
0263-8223,
32
, pp.
649
658
.
254.
Hu
,
F. Z.
,
Soutis
,
C.
, and
Edge
,
E. C.
, 1997, “
Interlaminar Stresses in Composite Laminates With a Circular Hole
,”
Compos. Struct.
0263-8223,
37
, pp.
223
232
.
255.
Yang
,
B.
, 2002, “
Examination of Free-Edge Crack Nucleation Around an Open Hole in Composite Laminates
,”
Int. J. Fract.
0376-9429,
115
, pp.
173
191
.
256.
Tang
,
S.
, 1977, “
Interlaminar Stresses Around Circular Cutouts in Composite Plates Under Tension
,”
AIAA J.
0001-1452,
15
, pp.
1631
1637
.
257.
Delale
,
F.
, 1984, “
Stress Analysis of Multilayered Plates Around Circular Holes
,”
Int. J. Eng. Sci.
0020-7225,
22
, pp.
57
75
.
258.
Shalev
,
D.
, and
Reifsnider
,
K. L.
, 1989, “
Influence of Relative Ply Orientations on the Nature of the Edge Effect Singularities for a Circular Hole in a Composite Laminate
,”
Int. J. Solids Struct.
0020-7683,
25
, pp.
1115
1132
.
259.
Ko
,
C. C.
, and
Lin
,
C. C.
, 1992, “
Method for Calculating the Interlaminar Stresses in Symmetric Laminates Containing a Circular Hole
,”
AIAA J.
0001-1452,
30
, pp.
197
204
.
260.
Iarve
,
E. V.
, 1996, “
Spline Variational Three Dimensional Stress Analysis of Laminated Composite Plates With Open Holes
,”
Int. J. Solids Struct.
0020-7683,
33
, pp.
2095
2118
.
261.
Herrmann
,
K. P.
, and
Linnenbrock
,
K.
, 2002, “
Three-dimensional Thermal Crack Growth in Self-stressed Bimaterial Joints: Analysis and Experiment
,”
Int. J. Fract.
0376-9429,
114
, pp.
133
151
.
262.
Becker
,
W.
,
Jin
,
P. P.
, and
Neuser
,
P.
, 1999, “
Interlaminar Stresses at the Free Corners of a Laminate
,”
Compos. Struct.
0263-8223,
45
, pp.
155
162
.
263.
Becker
,
W.
,
Jin
,
P. P.
, and
Lindemann
,
J.
, 2000, “
Thermally Induced Interlaminar Stress Concentrations at Laminate Corners
,”
ZAMM
0044-2267,
80
, pp.
S375
S376
.
264.
Becker
,
W.
,
Jin
,
P. P.
, and
Lindemann
,
J.
, 2001, “
The ‘Free-Corner Effect’ in Thermally Loaded Laminates
,”
Compos. Struct.
0263-8223,
52
, pp.
97
102
.
265.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2003, “
Three-Dimensional Closed-Form Analysis of the Stress Field at Rectangular Corners of Layered Plates
,”
Arch. Appl. Mech.
0939-1533,
73
, pp.
63
74
.
266.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2004, “
Interlaminar Stress Concentrations in Layered Structures-Part II: Closed-Form Analysis of Stresses at Laminated Rectangular Wedges With Arbitrary Non-Orthotropic Layup
,”
J. Compos. Mater.
0021-9983,
38
, pp.
1063
1090
.
267.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2003, “
Free-Corner Effects in Cross-Ply Laminates: An Approximate Higher-Order Theory Solution
,”
J. Compos. Mater.
0021-9983,
37
, pp.
2043
2068
.
268.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2004, “
A Variational Finite Layer Technique for the Analytical Investigation of Free-Corner Effects in Composite Structures
,”
J. Therm. Stresses
0149-5739,
27
, pp.
953
981
.
269.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2004, “
Thermoelastic Fields in Boundary Layers of Isotropic Laminates
,”
J. Appl. Mech.
0021-8936,
72
, pp.
86
101
.
270.
Reddy
,
J. N.
, 1987, “
A Generalization of Two-Dimensional Theories of Laminated Composite Plates
,”
Commun. Appl. Numer. Methods
0748-8025,
3
, pp.
173
180
.
271.
Griffin
,
O. H.
, 1988, “
Three-Dimensional Thermal Stresses in Angle-Ply Composite Laminates
,”
J. Compos. Mater.
0021-9983,
22
, pp.
53
70
.
272.
Koguchi
,
H.
, 1997, “
Stress Singularity Analysis in Three-Dimensional Bonded Structure
,”
Int. J. Solids Struct.
0020-7683,
34
, pp.
461
480
.
273.
Labossiere
,
P. E. W.
, and
Dunn
,
M. L.
, 2001, “
Fracture Initiation at Three-Dimensional Bimaterial Interface Corners
,”
J. Mech. Phys. Solids
0022-5096,
49
, pp.
609
634
.
274.
Nied
,
H. F.
, and
Ayhan
,
A. O.
, 2001, “
Analysis of Three-Dimensional Interface Cracking in Electronic Packages
,”
Proceedings Advances in Fracture Research/ICF 10
,
K. K.
Ravi-Chander
,
B. L.
Kariloo
,
T.
Kishi
,
R. O.
Ritchie
,
A. T.
Yokobori
, Jr.
, and
T.
Yokobori
, eds., Elsevier Science, CD ROM, Paper No. ICF100832OR.
275.
Dimitrov
,
A.
,
Andrae
,
H.
, and
Schnack
,
E.
, 2001, “
Efficient Computation of Order and Mode of Corner Singularities in 3D-Elasticity
,”
Int. J. Numer. Methods Eng.
0029-5981,
51
, pp.
1
24
.
276.
Dimitrov
,
A.
,
Andrae
,
H.
, and
Schnack
,
E.
, 2002, “
Singularities Near Three-Dimensional Corners in Composite Laminates
,”
Int. J. Fract.
0376-9429,
115
, pp.
361
375
.
277.
Dimitrov
,
A.
, and
Schnack
,
E.
, 2002, “
Asymptotical Expansion In Non-Lipschitzian Domains-A Numerical Approach
,”
Numer. Linear Algebra Appl.
1070-5325,
9
,
467
492
.
278.
Dimitrov
,
A.
,
Buchholz
,
F. G.
, and
Schnack
,
E.
, 2002,
Free-Surface Effects in Crack Propagation: A Theoretical-Numerical-Experimental Correlation
, Karlsruhe University, Institute of Solid Mechanics, Karlsruhe.
279.
Dimitrov
,
A.
,
Buchholz
,
F. G.
, and
Schnack
,
E.
, 2002, “
3D-Corner Effects in Crack Propagation
,”
Proceedings of the WCCMV-Fifth World Congress on Computational Mechanics
,
H. A.
Mang
,
F. G.
Rammerstorfer
, and
J.
Eberhardsteiner
, eds., Vienna, pp.
1
10
.
280.
Dimitrov
,
A.
, 2002,
Eckensingularitäten bei Räumlichen Problemen der Elastizitätstheorie: Numerische Berechnung und Anwendungen
,
Karlsruhe University
,
Institute of Solid Mechanics, Karlsruhe
.
281.
Mittelstedt
,
C.
,
Lindemann
,
J.
, and
Becker
,
W.
, 2004, “
A Boundary Finite Element Method Formulation for Stress Concentration Problems in Composite Laminates
,”
Proceedings of the WCCM VI-Sixth World Congress on Computational Mechanics
,
Beijing
.
282.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2004, “
Semi-Analytical Computation of 3D Stress Singularities in Linear Elasticity
,”
Commun. Numer. Methods Eng.
1069-8299,
21
, pp.
247
257
.
283.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2004, “
Asymptotic Analysis of Stress Singularities in Composite Laminates by the Boundary Finite Element Method
,”
Int. J. Solids Struct.
0020-7683,
43
, pp.
2868
2903
.
284.
Salamon
,
N. J.
, 1980, “
An Assessment of the Interlaminar Stress Problem in Laminated Composites
,”
J. Compos. Mater.
0021-9983,
14
, pp.
177
194
.
285.
Reddy
,
J. N.
, 1985, “
Finite-Element Modeling of Layered, Anisotropic Composite Plates and Shells: A Review of Recent Research
,”
Shock Vib. Dig.
0583-1024,
17
, pp.
3
12
.
286.
Pagano
,
N. J.
, 1989,
Interlaminar Response of Composite Materials
,
Composite Materials Series
Vol.
5
,
Elsevier
,
Amsterdam
.
287.
Reddy
,
J. N.
, and
Robbins
,
D. H.
, 1994, “
Theories and Computational Models for Composite Laminates
,”
Appl. Mech. Rev.
0003-6900,
47
, pp.
147
169
.
288.
Rohwer
,
K.
, 1996,
Modelle und Methoden zur Berechnung von Laminaten aus Unidirektionalen Faserverbunden
,
VDI
,
Düsseldorf
.
289.
Kant
,
T.
, and
Swaminathan
,
K.
, 2000, “
Estimation of Transverse/Interlaminar Stresses in Laminated Composites: A Selective Review and Survey of Current Developments
,”
Compos. Struct.
0263-8223,
49
, pp.
65
75
.
290.
Yang
,
Y. Y.
, 2003,
Solutions of Dissimilar Material Singularity and Contact Problems
,
Forschungszentrum Karlsruhe
,
Karlsruhe
.
291.
Altenbach
,
H.
, and
Becker
,
W.
, 2003,
Modern Trends in Composite Laminates Mechanics
,
Springer
,
Wien
.
292.
Mittelstedt
,
C.
, and
Becker
,
W.
, 2004, “
Interlaminar Stress Concentrations in Layered Structures-Part, 1: A Selective Literature Survey on the Free-Edge Effect Since 1967
,”
J. Compos. Mater.
0021-9983,
38
, pp.
1037
1062
.
You do not currently have access to this content.