The review presents an update of the work done in the micro heat pipe research and development, with an aim to give updated detailed knowledge to individuals new to the field, as well as to those already working in this area. Presented here is a summary of the recent advances in these devices occurring since the early 1990s. The following review describes the historical development of these devices, along with a review of the steady state and the transient models, sensitivity analyses, recent experimental investigations and fabrication techniques. The critical heat input, dryout length, fill charge, various heat pipe limitations and design have also been discussed in brief. Finally, future research and areas in which additional information is required are identified and delineated. This article has 204 references.

1.
King
,
C. R.
, 1931, “
Perkins Hermetic Tube Boilers
,”
The Engineer
,
152
, pp.
405
406
.
2.
Perkins
,
L. P.
, and
Buck
,
W. E.
, 1892, “
Improvements in Devices for the Diffusion or Transference of Heat
,” UK Patent No. 22,272, London, England.
3.
Gay
,
F. W.
, 1929, “
Heat Transfer Means
,” U.S. Patent No. 1,725,90.
4.
Gaugler
,
R.
, 1944, “
Heat Transfer Device
,” U.S. Patent No. 2350348.
5.
Trefethen
,
L.
, 1962, “
On the Surface Tension Pumping of Liquids or a Possible Role of the Candlewick in Space Exploration
,” Tech Info., G. E., Serial No. 615 D114.
6.
Grover
,
G.
, 1966, “
Evaporation—Condensation Heat Transfer Device
,” U.S. Patent No. 3229759.
7.
Grover
,
G. M.
,
Cotter
,
T. P.
, and
Erikson
,
G. F.
, 1964, “
Structures of Very High Thermal Conductivity
,”
J. Appl. Phys.
0021-8979,
35
, pp.
1190
1191
.
8.
Cotter
,
T. P.
, 1984, “
Principles and Prospects of Micro Heat Pipes
,”
Proceedings of the 5th Int. Heat Pipe Conference
,
Tsukuba, Japan
, pp.
328
332
.
9.
Chi
,
S. W.
, 1976,
Heat Pipe Theory and Practice
,
Hemisphere
,
Washington, D.C
.
10.
Dunn
,
P. D.
, and
Reay
,
D. A.
, 1982,
Heat Pipes
,
Pergamon
,
Oxford, UK
.
11.
Terpstra
,
M.
, and
Van Veen
,
J. G.
, 1981,
Heat Pipes: Construction and Application
,
Elsevier Applied Science
,
New York
.
12.
Peterson
,
G. P.
, 1994,
An Introduction to Heat Pipes: Modeling, Testing, and Applications
,
Wiely
,
New York
.
13.
Faghri
,
A.
, 1995,
Heat Pipe Science and Technology
,
Taylor & Francis
,
Washington, D.C
.
14.
Peterson
,
G. P.
, 2001,
The MEMS Handbook
,
CRC Press
,
Boca Raton, FL
, Chap. 31.
15.
Spalding
,
D. B.
, 1980, “
Mathematical Modeling of Fluid—Mechanics Heat Transfer and Chemical—Reaction Processes a Lecture Course
,” CFDU Report No. HTS/80/1,
Imperial College
, London, U.K.
16.
Ivanovskii
,
M. N.
,
Sorokin
,
V. P.
, and
Yagodkin
,
I. V.
, 1982,
The Physical Principles of Heat Pipes
,
Oxford University Press
,
Oxford, UK
.
17.
Yuan
,
S. W.
, and
Finkelstein
,
A. B.
, 1955, “
Laminar Flow With Injection and Suction Through a Porous Wall
,”
Proceedings Heat Transfer and Fluid Mechanics Institute
,
Los Angeles
.
18.
Nouri-Borujerdi
,
A.
, and
Layeghi
,
M.
, 2005, “
A Review of Concentric Annular Heat Pipes
,”
Heat Transfer Eng.
0145-7632,
26
, pp.
45
58
.
19.
Cao
,
Y.
,
Faghri
,
A.
, and
Mahefkey
,
E. T.
, 1993, “
Micro/Miniature Heat Pipes and Operating Limitations
,”
Proceedings ASME Annual Meeting
, HTD-Vol.
236
,
American Society of Mechanical Engineers
,
Fairfield, NJ
, pp.
55
62
.
20.
Mallik
,
A. K.
, and
Peterson
,
G. P.
, 1995, “
Transient Response Characteristics of Vapor Deposited Micro heat Pipe
,”
J. Electron. Packag.
1043-7398,
117
, pp.
82
87
.
21.
Mallik
,
A. K.
,
Peterson
,
G. P.
, and
Weichold
,
M. H.
, 1992, “
On the Use of Micro heat Pipes as an Integral Part of Semiconductor Devices
,”
J. Electron. Packag.
1043-7398,
114
, pp.
436
442
.
22.
Peterson
,
G. P.
,
Duncan
,
A. B.
, and
Weichold
,
M. H.
, 1993, “
Experimental Investigation of Micro heat Pipes Fabricated in Silicon Wafers
,”
J. Heat Transfer
0022-1481,
115
, pp.
750
756
.
23.
Babin
,
B. R.
,
Peterson
,
G. P.
,
Wu
,
D.
, 1990, “
Steady State Modeling and Testing of a Micro Heat Pipe
,”
J. Heat Transfer
0022-1481,
112
, pp.
595
601
.
24.
Longtin
,
J. P.
,
Badran
,
B.
, and
Gerner
,
F. M.
, 1994, “
A One-Dimensional Model of a Micro heat Pipe During Steady State Operation
,”
J. Heat Transfer
0022-1481,
116
, pp.
709
715
.
25.
Wu
,
D.
, and
Peterson
,
G. P.
, 1991, “
Investigation of the Transient Characteristics of a Micro heat Pipe
,”
J. Thermophys. Heat Transfer
0887-8722,
5
(
2
), pp.
129
134
.
26.
Peterson
,
G. P.
, and
Ma
,
H. B.
, 1996, “
Theoretical Analysis of the Maximum Heat Transport in Triangular Grooves: A Study of Idealized Micro heat Pipe
,”
J. Heat Transfer
0022-1481,
118
, pp.
731
739
.
27.
Khrustalev
,
D.
, and
Faghri
,
A.
, 1994, “
Thermal Analysis of a Micro heat Pipe
,”
J. Heat Transfer
0022-1481,
116
(
1
), pp.
189
198
.
28.
Xu
,
X.
, and
Carey
,
V. P.
, 1990, “
Film Evaporation From a Micro-Grooved Surface—An Approximate Heat Transfer Model and its Comparison With Experimental Data
,”
J. Thermophys. Heat Transfer
0887-8722,
4
, pp.
512
520
.
29.
Ravikumar
,
M.
, and
DasGupta
,
S.
, 1997, “
Modeling of Evaporation From V-Shaped Microgrooves
,”
Chem. Eng. Commun.
0098-6445,
160
, pp.
225
248
.
30.
Ma
,
H. B.
, and
Peterson
,
G. P.
, 1996, “
Experimental Investigation of the Maximum Heat Transport in Triangular Grooves
,”
J. Heat Transfer
0022-1481,
118
, pp.
740
746
.
31.
Khan
,
A. Md.
,
Mishro
,
S.
,
De
,
S.
, and
DasGupta
,
S.
, 1999, “
An Experimental and Theoretical Investigation of Evaporating Cooling From V-Shaped Microgrooves
,”
Int. J. Transp. Phenom.
1028-6578,
1
, pp.
277
289
.
32.
Ha
,
J. M.
, and
Peterson
,
G. P.
, 1998, “
Analytical Prediction of Axial Dry-Out Point for Evaporating Liquids in Axial Microgrooves
,”
J. Heat Transfer
0022-1481,
120
, pp.
452
457
.
33.
Anand
,
S.
,
De
,
S.
,
DasGupta
,
S.
, 2002, “
Experimental and Theoretical Study of Axial Dry-Out Point for Evaporative From V-Shaped Microgrooves
,”
Int. J. Heat Mass Transfer
0017-9310,
45
, pp.
1535
1543
.
34.
Catton
,
I.
, and
Stroes
,
G. R.
, 2002, “
A Semi-Analytical Model to Predict the Capillary Limit of Heated Inclined Triangular Capillary Grooves
,”
ASME J. Heat Transfer
0022-1481,
124
, pp.
162
168
.
35.
Suman
,
B.
,
De
,
S.
, and
DasGupta
,
S.
, 2005, “
A Model of the Capillary Limit of a Micro Grooved Heat Pipe and the Prediction of Dry-Out Length
,”
Int. J. Heat Fluid Flow
0142-727X,
26
(
3
), pp.
495
505
.
36.
Suman
,
B.
,
De
,
S.
, and
DasGupta
,
S.
, 2005, “
Transient Modeling of Micro-Grooved Heat Pipe
,”
Int. J. Heat Mass Transfer
0017-9310,
48
(
8
), pp.
1633
1646
.
37.
Suman
,
B.
, and
Hoda
,
N.
, 2005, “
Effect of Variations in Thermophysical Properties and Design Parameters on the Performance of a V-Shaped Micro Grooved Heat Pipe
,”
Int. J. Heat Mass Transfer
0017-9310,
48
, pp.
2090
2101
.
38.
Suman
,
B.
, and
Kumar
,
P.
, 2005, “
An Analytical Model for Fluid Flow and Heat Transfer in a Micro Heat Pipe of Polygonal Shape
,”
Int. J. Heat Mass Transfer
0017-9310,
48
, pp.
4498
4509
.
39.
Suman
,
B.
, 2006, “
On the Fill Charge and the Sensitivity Analysis of a V-Shaped Micro Heat Pipe
,”
AIChE J.
0001-1541,
52
(
9
), pp.
3041
3054
40.
Suman
,
B.
, and
Hoda
,
N.
, 2006, “
On the Transient Analysis of a V-Shaped Micro-Grooved Heat Pipe
,”
ASME J. Heat Transfer
0022-1481, in press.
41.
Peterson
,
G. P.
, 1993, “
Investigation of Micro Heat Pipes Fabricated as an Integral Part of Silicon Wafers
,”
Tongze
Ma
, eds.,
Advances in Heat Pipe Science and Technology, Proceedings of the 8th International Heat Pipe Conference
, Beijing, Sept. 14–18, 1992,
International Academic Publishers
,
Beijing, P.R. China
, pp.
385
395
.
42.
Itoh
,
A.
,
Polasek
,
F.
,
Itoh
R.
, and
Lab
,
D.
, 1993, “
Development and Application of Micro Heat Pipes
,”
L. L
Vasiliev
, ed.,
Heat Pipe Technology, Proceedings of the 7th International Heat Pipe Conference
, Minsk, May 21–25, 1990,
Begell House
,
New York
, pp.
295
310
.
43.
Cao
,
Y.
, and
Faghri
,
A.
, 1994, “
Micro/miniature Heat Pipes and Operating Limitations
,”
J. Enhanced Heat Transfer
1065-5131,
1
(
3
), pp.
265
274
.
44.
Shyu
,
R. J.
, 1997, “
Heat Pipe Eesearch and Applications in Taiwan
,”
J.
Andrews
,
A.
Akbarzadeh
, and
I.
Sauciuc
, eds.,
Heat Pipe Technology: Theory Applications and Prospects, Proceedings of the 5th International Heat Pipe Symposium
, Melbourne, Nov. 17–20, 1996,
Elsevier
,
Oxford, UK
, pp.
55
65
.
45.
Peterson
,
G. P.
, 1992, “
Overview of Micro Heat Pipe Research and Development
,”
Appl. Mech. Rev.
0003-6900,
45
, pp.
175
189
.
46.
Peterson
,
G. P.
, 1996, “
Modeling, Fabrication and Testing of Micro Heat Pipes: An Update
,”
Appl. Mech. Rev.
0003-6900,
49
(
10
), pp.
175
183
.
47.
Peterson
,
G. P.
,
Swanson
,
L. W.
, and
Gerner
,
F. M.
, 1998, “
Micro Heat Pipes
,”
C.-L.
Tien
,
A.
Majumbar
, and
F. M.
Gerner
,
Proceedings Microscale Energy Transport
,
Taylor & Francis
,
Washington, D.C.
, pp.
295
337
.
48.
Tuckerman
,
D. B.
, and
Pease
,
R. F. W.
, 1981, “
High-Performance Heat Sinking for VLSI
,”
IEEE Electron Device Lett.
0741-3106,
2
(
5
), pp.
126
129
.
49.
Take
,
K.
, and
Webb
,
R.
, 2001, “
Thermal Performance of Integrated Plate Heat Pipe With a Heat Spreader
,”
J. Electron. Packag.
1043-7398,
123
, pp.
189
195
.
50.
Ortega
,
A.
,
Lall
,
B. S.
,
Chicci
,
J.
,
Aghazadeh
,
M.
, and
Kiang
,
B.
, 1963, “
Heat Transfer in Low Aspect Ratio Horizontal Enclosure for Laptop Computer Application
,”
Semiconductor Thermal Measurement and Management Symposium—SEMI-THERM
, Feb. 2–4, pp.
201
210
.
51.
Xie
,
H.
,
Aghazadeh
,
M.
,
Lui
,
W.
, and
Haley
,
K.
, 1995, “
Thermal Solutions to Pentium Processors in TCP in Notebooks and Sub-notebook
,”
Proceeding of the 1995 Electronic Components and Technology Conference (ECTC)
, May 21–24 pp.
201
210
.
52.
Iswannath
,
R.
, and
Ali
,
I. A.
, 1995, “
Thermal Modeling of High Performance Packages in Portable Computers
,”
Proceeding of the 1995 Electronic Components and Technology Conference (ECTC)
, May 21–24, pp.
1122
1133
.
53.
Xie
,
H.
,
Aghazadeh
,
M.
, and
Toth
,
J.
, 1995, “
The Use of Heat Pipes in the Cooling of Portables With High Power Packages—A Case Study With the Pentium Processor—Based Notebooks and Sub-notebooks
,”
Proceeding of the 1995 Electronic Components and Technology Conference (ECTC)
, May 21–24, pp.
906
913
.
54.
Marongiu
,
M. J.
,
Kusha
,
B.
,
Fallon
,
G. S.
, and
Watwe
,
A. A.
, 1998, “
Enhancement of Multi Chip Modules (MCMs) Cooling Incorporating Micro Heat Pipes and Other High Thermal Conductivity Materials into Mechanical Micro Channel Heat Sinks
,”
Proceeding of the 1995 Electronic Components and Technology Conference (ECTC)
, May 21–24, pp.
1122
1133
.
55.
Adkins
,
D. R.
,
Shen
,
D. S.
,
Palmer
,
D. W.
, and
Tuck
,
M. R.
, 1994, “
Silicon Heat Pipes for Cooling Electronics
,”
Proceedings 1st Annual Spacecraft Thermal Control Symposium
,
Albuquerque, NM
, 16–18 Nov., p.
10
.
56.
Weichold
,
M. H.
,
Peterson
,
G. P.
, and
Mallik
,
A. K.
, 1993, U.S. Patent No. 5,179,043, January 12.
57.
Kojima
,
Y.
,
Yamazaki
,
N.
,
Yoshida
,
K.
,
Murakami
,
H.
, and
Murakami
,
M.
, 1993, “
LSI Cooling System With Micro Heat Pipe
,”
Advances in Heat Pipe Science and Technology, Proceedings of the 8th International Heat Pipe Conference
,
T.
Ma
, ed., Beijing, Sept. 14–18, 1992,
International Academic Publishers
,
Beijing, Peop. Rep. China
, pp.
539
542
.
58.
Peterson
,
G. P.
, and
Oktay
,
S.
, 1990, U.S. Patent No. 4,951,740 August 28.
59.
Peterson
,
G. P.
, and
Oktay
,
S.
, 1997, “
Coupled Flux Transformer Heat Pipes
,” U.S. Patent No. 5,647,429, January 15.
60.
North
,
M. T.
, and
Avedisian
,
C. T.
, 1993, “
Heat Pipes for Cooling High Flux/High Power Semiconductor Chips
,”
J. Electron. Packag.
1043-7398,
115
(
1
), p.
112
.
61.
Rosenfeld
,
J. H.
,
Gernet
,
N. J.
, and
North
,
M. T.
, 1994, “
Internally Extended Surface Heat Pipe Evaporators for Microelectronics Cooling
,”
HTD (Am. Soc. Mech. Eng.)
0272-5673,
273
, pp.
93
100
.
62.
Fletcher
,
L. S.
, and
Peterson
,
G. P.
, 1993, “
Micro Heat Pipe Catheter for Local Tumor Hyperthermia
,” U.S. Patent No. 190,539, March 2.
63.
Peterson
,
G. P.
, and
Fletcher
,
L. S.
, 1995, “
Temperature Control Mechanisms for Micro Heat Pipe Catheters
,” U.S. Patent No. 5,417,686, May 23.
64.
Peterson
,
G. P.
, and
Fletcher
,
L. S.
, 1997, “
Treatment Method Using a Micro Heat Pipe Catheter
,” U.S. Patent No. 5,591,162, January 7.
65.
Rothman
,
S. M.
,
Smyth
,
M. D.
,
Yang
,
X. F.
, and
Peterson
,
G. P.
, 2005, “
Focal Cooling for Epilepsy
,”
Epilepsy Behav.
1525-5050,
7
, pp.
214
221
.
66.
Camarda
,
C. J.
,
Peterson
,
G. P.
, and
Rummler
,
D. R.
, 1996, “
Micro Heat Pipe Panels and Method for Producing Same
,” U.S. Patent No. 5,527,588, June 18.
67.
Camarda
,
C. J.
,
Peterson
,
G. P.
, and
Rummler
,
D. R.
, 1996, “
Micro Heat Pipe Panels and Method for Producing Same
,” U.S. Patent No. 5,527,588, June 18.
68.
Peterson
,
G. P.
, 2001, “
US Government-Authored or -Collected Reports Written by G. P. Peterson
,” Report No. A223004.
69.
Baker
,
K. W.
,
Dustin
,
M. O.
, and
Crane
,
R.
, “
Heat Receiver Design for Solar Dynamic Space Power Systems, International Solar Energy Conference
,”
Miami, FL
, April 1–4.
70.
Andraka
,
C. E.
,
Diver
,
R. B.
, and
Wolf
,
D. A.
, 1992, “
Design, Fabrication, and Testing of a 30kW Screen-Wick Heat-Pipe Solar Receiver
,”
Proceeding 27th Intersociety Energy Conversion Engineering Conference
,
San Diego, CA
.
71.
Adkins
,
D. R.
, 1993, “
High-Flux Testing of Heat Pipes for Point-Focus Solar Collector Systems
,”
Proceedings National Conference and Exposition on Heat Transfer
,
Atlanta, GA
, August 8–11.
72.
Boman
,
B. L.
, and
Elias
,
T. I.
, 1990, “
Tests on a Sodium/Hastelloy X Wing Leading Edge Heat Pipe for Hypersonic Vehicles
,”
Proceedings 5th AIAA and ASME Joint Thermophysics and Heat Transfer Conference
,
Seattle, WA
, June 18–20.
73.
Cao
,
Y.
, and
Faghri
,
A.
, 1992, “
Analyses of Transient and Steady State Performances of Nosecap and Wing Leading Edge Heat Pipes
,” Heat Pipes and Thermosyphons,
HTD (Am. Soc. Mech. Eng.)
0272-5673,
221
, pp.
43
52
.
74.
Cao
,
Y.
, and
Faghri
,
A.
, 1993, “
Conjugate Modeling of High-Temperature Nosecap and Wing Leading Edge Heat Pipes
,”
J. Heat Transfer
0022-1481,
115
(
3
), p.
819
.
75.
Gottschlich
,
J. M.
, and
Meininger
,
M.
, 1992, “
Heat Pipe Turbine Vane Cooling
,”
Proceedings 27th Intersociety Energy Conversion Engineering Conference
,
San Diego, CA
, August 3–7.
76.
Faghri
,
A.
, and
Guo
,
Z.
, 2005, “
Challenges and Opportunities of Thermal Management Issues Related to Fuel Cell Technology and Modeling
,”
Int. J. Heat Mass Transfer
0017-9310,
48
(
19–20
), pp.
3891
3920
.
77.
Peterson
,
G. P.
, and
Ma
,
H. B.
, 1999, “
Temperature Response of Heat Transport in a Micro Heat Pipe
,”
J. Heat Transfer
0022-1481,
121
(
2
), pp.
438
445
.
78.
Peterson
,
G. P.
, and
Ma
,
H. B.
, 1998, “
Temperature Response and Heat Transport in a Micro Heat Pipe
,”
Proceedings of the 7th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 1998
, Vol.
3
, pp.
233
242
.
79.
Sartre
,
V.
,
Zaghdoudi
,
M. C.
, and
Lallemand
,
M.
, 2000, “
Effect of Interfacial Phenomena on Evaporative Heat Transfer in Micro Heat Pipes
,”
Int. J. Therm. Sci.
1290-0729,
39
(
4
), pp.
498
504
.
80.
Tio
,
K. K.
,
Liu
,
C. Y.
, and
Toh
,
K. C.
, 2000, “
Thermal Analysis of Micro Heat Pipes Using a Porous-Medium Model
,”
Heat Mass Transfer
0947-7411,
36
(
1
), pp.
21
28
.
81.
Riffat
,
S. B.
,
Zhao
,
X.
, and
Doherty
,
P. S.
, 2002 “
Analytical and Numerical Simulation of the Thermal Performance of ‘Mini’ Gravitational and ‘Micro’ Gravitational Heat Pipes
,”
Appl. Therm. Eng.
1359-4311,
22
, pp.
1047
1068
.
82.
Collier
,
J. G.
, 1981, “
Convective Boiling and Condensation
,”
McGraw–Hill
,
New York
.
83.
Colwell
,
G. T.
, and
Chang
,
W. S.
, 1984, “
Measurements of the Transient Behavior of a Capillary Structure Under Heavy Thermal Loading
,”
Int. J. Heat Mass Transfer
0017-9310,
27
(
4
), pp.
541
551
.
84.
Zhang
,
J.
, and
Wong
,
H.
, 2002, “
Evaporation, Condensation, and Flow in an Idealized Micro Heat Pipe
,”
Proceedings of the ASME Heat Transfer Division—2002
, Volume
4
, pp.
221
224
.
85.
Kalahasti
,
S.
, and
Joshi
,
Y. K.
, 2002, “
Performance Characterization of a Novel Flat Plate Micro Heat Pipe Spreader
,”
IEEE Trans. Compon. Packag. Technol.
1521-3331,
25
(
2
), pp.
554
560
.
86.
Kim
,
S. J.
,
Seo
,
J. K.
, and
Do
,
K. H.
, 2002, “
Analytical and Experimental Investigation on the Operational Characteristics and the Thermal Optimization of a Miniature Heat Pipe With a Grooved Wick Structure
,”
Int. J. Heat Mass Transfer
0017-9310,
45
, pp.
1535
1543
.
87.
Khandekar
,
S.
,
Groll
,
M.
,
Luckchoura
,
V.
,
Findl
,
W.
, and
Zhuang
,
J.
, 2003, “
Micro Heat Pipes for Stacked 3D Microelectronics Modules
,”
Advances in Electronic Packaging, International Electronic Packaging Technical Conference and Exhibition
,
Maui, HI
, July 6–11.
88.
Do
,
K. H.
,
Kim
,
S. J.
, and
Hwang
,
G.
, 2003, “
Modeling and Thermal Optimization of a Micro Heat Pipe With Curved Triangular Grooves
,”
Advances in Electronic Packaging 2003, International Electronic Packaging Technical Conference and Exhibition
,
Maui, HI
, July 6–11, Vol.
2
, pp.
271
287
.
89.
Suh
,
J. S.
, and
Park
,
Y. S.
, 2003, “
Analysis of Thermal Performance in a Micro Flat Heat Pipe With Axially Trapezoidal Groove
,”
Tamkang Journal of Science and Engineering
,
6
(
4
), pp.
201
206
.
90.
Schneider
,
G. E.
, and
DeVos
,
R.
, 1980, “
Non-dimensional Analysis for the Heat Transport Capability of Axially-grooved Heat Pipes Including Liquid/vapor Interaction
,” AIAA Paper No. 80-0214.
91.
Sheu
,
T. S.
,
Kuo
,
J. S.
,
Ding
,
P. P.
, and
Chen
,
P. H.
, 2004, “
Theoretical Analysis of Capillary Performance of Triangular Microgrooves
,”
Microsyst. Technol.
0946-7076,
10
(
4
), pp.
315
322
.
92.
Alario
,
J.
,
Haslett
,
R.
, and
Kosson
,
R.
, 1981,
The Monogroove High Performance Heat Pipe
, AIAA Paper No. 81-1156.
93.
Babin
,
B. R.
,
Peterson
,
G. P.
, and
Wu
,
D.
, 1990, “
Steady State Modeling and Testing of a Micro Heat Pipe
,”
J. Heat Transfer
0022-1481,
112
, pp.
595
601
.
94.
Beam
,
J. E.
, and
Mahafekey
,
E. T.
, 1986, “
Heat Transfer Visualization in the Double Wall Artery Heat Pipe
,”
AIAA/ASME Thermophysics and Heat Transfer Conference
,
Boston, MA
, June 2–4.
95.
Stalmach
,
D. D.
,
Oren
,
J. A.
, and
Cox
,
R. L.
, 1984, “
Systems Evaluation of Thermal Bus Concepts
,” 2–53200/2r-53030, Vought Crop., Dallas, TX, Feb.
96.
Fleischman
,
G. L.
, 1982, “
Osmotic Heat Pipe
,” Air Force Wright Aeronautical Lab., TR-81-31332, Wright-Patterson AFB, Dayton, OH, Nov.
97.
Narasaki
,
T.
, 1978, “
The Characteristics of Bimorph Vibrator Pump
,”
Proceedings of the SAE Energy Conservation Engineering Conference
,
San Franscisco, CA
, Aug., pp.
2005
2010
.
98.
Peterson
,
G. P.
, 1986, “
Thermal Control Systems for Spacecraft Instrumentation
,”
J. Spacecr. Rockets
0022-4650,
24
(
1
), pp.
7
14
.
99.
Hanford
,
A. J.
, and
Ewert
,
M. K.
, 1986, “
Advanced Active Thermal Control Systems Architecture Study
,” NASA TM 104822, Houston, TX, Oct.
100.
Jones
,
T. B.
, 1974, “
An Electrohydrodynamic Heat Pipe
,”
Mech. Eng. (Am. Soc. Mech. Eng.)
0025-6501,
96
(
1
), pp.
27
32
.
101.
Jones
,
T. B.
, and
Perry
,
M. P.
, 1974, “
Electrohydrodynamic Heat Pipe Experiments
,”
J. Appl. Phys.
0021-8979,
45
(
5
), pp.
2129
2132
.
102.
Loehrke
,
R. I.
, and
Debs
,
R. J.
, 1975, “
Measurements of the Performance of an Electrohydrodynamic Heat Pipe
,” AIAA Paper No. 75-659.
103.
Bologa
,
M. K.
, and
Savin
,
I. K.
, 1990, “
Electrohydrodynamic Heat Pipes
,”
Proceedings of the 7th International Heat Pipe Conference
, Minsk, Begell House,
New York
, pp.
549
562
.
104.
Babin
,
B. R.
,
Peterson
,
G. P.
, and
Seyed-Yagoobi
,
J.
, 1993, “
Experimental Investigation of an Ion-Drag Pump Assisted Heat Pipe
,”
J. Thermophys. Heat Transfer
0887-8722,
7
(
2
), pp.
340
345
.
105.
Sato
,
M.
,
Nishida
,
S.
, and
Noto
,
F.
, 1992, “
Study on Electrohydrodynamical Heat Pipe
,”
Proceedings ASME JSES KSES International Solar Energy Conference
, Part 1 of 2,
American Society of Mechanical Engineers
, New York, pp.
155
160
.
106.
Melcher
,
J. R.
, 1974, “
Electric Field and Moving Media
,”
IEEE Trans. Educ.
0018-9359,
E-17
(
2
), pp.
100
110
.
107.
Bryan
,
J. E.
, and
Seyed-Yagoobi
,
J.
, 1997, “
Heat Transport Enhancement of Monogroove Heat Pipe With Electrohydrodynamic Pumping
,”
J. Thermophys. Heat Transfer
0887-8722,
11
(
3
), pp.
454
460
.
108.
Yu
,
Z. Q.
,
Hallinani
,
K.
,
Bhagat
,
W.
, and
Kashani
,
R.
, 2002, “
Electrohydrodynamically Augmented Micro Heat Pipes
,”
J. Thermophys. Heat Transfer
0887-8722,
16
(
2
), pp.
180
186
.
109.
Moon
,
S. H.
,
Hwang
,
G.
,
Ko
,
S. C.
, and
Kim
,
Y. T.
, 2004, “
Experimental Study on the Thermal Performance of Micro Heat Pipe With Cross-Section of Polygon
,”
Microelectron. Reliab.
0026-2714,
44
, pp.
315
321
.
110.
Yu
,
Z.
,
Hallinan
,
K.
,
Bhagat
,
W.
, and
Kashani
,
R.
, 2000, “
Experimental and Analytical Studies of the Maximum Heat Transport Capacity in Electrohydrodynamically Enhanced Micro Heat Pipes
,”
Proceedings of the 34th National Heat Transfer Conference
,
S. C.
Yao
and
A.
Jones
, eds., Pittsburgh, PA, Aug. 20–22,
American Society of Mechanical Engineers
,
New York
, pp.
835
864
.
111.
Zhou
,
J.
,
Yao
,
Z.
, and
Zhu
,
J.
, 1993, “
Experimental Investigation of the Application Characters of Micro Heat Pipe
,”
Advances in Heat Pipe Science and Technology, Proceedings of the 8th International Heat Pipe Conference
,
T.
Ma
, ed., Beijing, Sept. 14–18, 1992,
International Academic Publishers
,
Beijing, Peop. Rep. China
, pp.
421
424
.
112.
Zhang
,
J.
,
Wang
,
C.
,
Yang
,
X.
, and
Zhou
,
Z.
, 1993, “
Experimental Investigation of the Heat Transfer Characteristics of the Micro Heat Pipes
,”
Advances in Heat Pipe Science and Technology, Proceedings of the 8th International Heat Pipe Conference
Beijing,
T.
Ma
, ed., Sept. 14–18, 1992,
International Academic Publishers
,
Beijing, Peop. Rep. China
, pp.
416
420
.
113.
Sobhan
,
C. B.
,
Xiaoyang
,
H.
, and
Yu
,
L. C.
, 2000, “
Investigations on Transient and Steady State Performance of a Micro Heat Pipe
,”
J. Thermophys. Heat Transfer
0887-8722,
14
(
2
), pp.
161
169
.
114.
Tio
,
K. K
,
Liu
,
C. Y.
, and
Toh
,
K. C.
, 2000, “
Thermal Analysis of Micro Heat Pipes Using a Porous Medium Model
,”
Heat Mass Transfer
0947-7411,
36
, pp.
21
28
.
115.
Ochterbeck
,
J. M.
, 2003,
Heat Pipes in Heat Transfer Handbook
,
A.
Bejan
and
A. D.
Kraus
, eds.,
Wiley
,
New York
.
116.
Duncan
,
A. B.
, and
Peterson
,
G. P.
, 1994, “
Charge Optimization for Triangular Shaped Etched Micro Heat Pipe
,”
HTD (Am. Soc. Mech. Eng.)
0272-5673,
278
, pp.
1
10
.
117.
Duncan
,
A. B.
, and
Peterson
,
G. P.
, 1995, “
Charge Optimization for Triangular Shaped Etched Micro Heat Pipe
,”
J. Thermophys. Heat Transfer
0887-8722,
9
(
2
), pp.
365
367
.
118.
Lee
,
M.
,
Wong
,
M.
, and
Zohar
,
Y.
, 2003, “
Characterization of an Integrated Micro heat Pipe
,”
J. Micromech. Microeng.
0960-1317,
13
, pp.
58
64
.
119.
Chen
,
Y. P.
, and
Cheng
,
P.
, 2003, “
Fractal Characterization of Wall Roughness on Pressure Drop in Microchannels
,”
Int. J. Heat Mass Transfer
0017-9310,
30
(
1
), pp.
1
11
.
120.
White
,
F. M.
, 1991,
Viscous Fluid Flow
,
2nd ed.
,
McGraw–Hill
,
New York
.
121.
Ma
,
H. B.
, and
Peterson
,
G. P.
, 1997, “
Laminar Fraction Factor in Microscale Ducts of Irregular Cross Section
,”
Microscale Thermophys. Eng.
1089-3954,
1
, p.
253
.
122.
Gokhale
,
A. M.
, and
Druky
,
W. J.
, 1990, “
A General Method for Estimation of Fracture Surface Roughness. II. Practical Considerations
,”
Metall. Trans. A
0360-2133,
21A
, p.
1201
.
123.
Kang
,
S. W.
,
Chen
,
J. S.
, and
Hung
,
J. Y.
, 1998, “
Surface Roughness of (110) Orientation Silicon Based Micro Heat Exchanger Channel
,”
Int. J. Mach. Tools Manuf.
0890-6955,
38
, p.
663
.
124.
Ma
,
H. B.
, and
Peterson
,
G. P.
, 1997, “
Laminar Friction Factor in Microscale Ducts of Irregular Cross Section
,”
Microscale Thermophys. Eng.
1089-3954,
1
(
3
), pp.
253
265
.
125.
Wu
,
H. Y.
, and
Cheng
,
P.
, 2003, “
Friction Factors in Smooth Trapezoidal Silicon Microchannels With Different Aspect Ratios
,”
Int. J. Heat Mass Transfer
0017-9310,
46
, pp.
2519
2525
.
126.
Suh
,
J. S.
,
Greif
,
R.
, and
Grigoropouls
,
C.
, 2001, “
Friction in Micro-channel Flows of a Liquid and Vapor in Trapezoidal and Sinusoidal Grooves
,”
Int. J. Heat Mass Transfer
0017-9310,
44
, pp.
3103
3109
.
127.
Mallik
,
A. K.
,
Peterson
,
G. P.
, and
Weichold
,
M. H.
, 1995, “
Fabrication of Vapor-Deposited Micro Heat Pipe Arrays as an Integral Part of Semiconductor Devices
,”
J. Microelectromech. Syst.
1057-7157,
4
(
3
), pp.
119
31
.
128.
Kang
,
S. W.
,
Tsai
,
S. H.
, and
Chen
,
H. C.
, 2002, “
Fabrication and Test of Radial Grooved Micro Heat Pipes
,”
Appl. Therm. Eng.
1359-4311,
22
, pp.
1559
1568
.
129.
Berre
,
M. L.
,
Launay
,
S.
,
Sartre
,
V.
, and
Lallemand
,
M.
, 2003, “
Fabrication and Experimental Investigation of Silicon Micro Heat Pipes for Cooling Electronics
,”
J. Micromech. Microeng.
0960-1317,
13
, pp.
436
441
.
130.
Moon
,
S. H.
,
Yun
,
H. G.
,
Ko
,
S. C.
,
Hwang
,
G.
,
Choy
,
T. G.
,
Jun
,
C. H.
, and
Kim
,
Y. T.
, 2003, “
Micro Heat Pipe With Poligonal Cross-Section Manufactured Via Extrusion or Drawing
,” US patent No. 20040112572.
131.
Lee
,
M.
,
Wong
,
M.
, and
Zohar
,
Y.
, 2003, “
Integrated Micro Heat-Pipe Fabrication Technology
,”
J. Microelectromech. Syst.
1057-7157,
12
(
2
), pp.
138
146
.
132.
Lee
,
M.
,
Wong
,
M.
, and
Zohar
,
Y.
, 2002, “
Design, Fabrication and Characterization of an Integrated Micro Heat Pipe
,”
IEEE International Conference on Micro Electro Mechanical Systems, Technical Digest, Proceedings 15th
, Las Vegas, NV, Jan. 20–24, 2002,
Institute of Electrical and Electronics Engineers
,
New York
, pp.
85
88
.
133.
Kang
,
S.-W.
,
Tsai
,
S.-H.
, and
Chen
,
H.-C.
, 2002, “
Fabrication and Test of Radial Grooved Micro Heat Pipes
,”
Appl. Therm. Eng.
1359-4311,
22
(
14
), pp.
1559
1568
.
134.
Heine
,
D.
, and
Groll
,
M.
, 1984, “
Compatibility of Organic Fluids With Commercial Structure Materials for Use in Heat Pipes
,”
Proceedings 5th International Heat Pipe Conference
,
Tsukuba, Japan
, pp.
170
174
.
135.
Sugumar
,
D.
, and
Tio
,
K. K.
, 2003, “
Heat Transport Limitation of a Triangular Micro Heat Pipe
,”
Proceedings 1st International Conference on Microchannels and Minichannels
,
S. G.
Kandlikar
, ed.,
Rochester, NY
, Apr. 24–25,
American Society of Mechanical Engineers
,
New York, NY
, pp.
739
746
.
136.
Ma
,
H. B.
, and
Peterson
,
G. P.
, 1996, “
The Capillary Limit of a Micro Heat Pipe
,”
Heat Transfer Science and Technology 1996, [Proceedings 4th International Symposium on Heat Transfer]
,
B.
Wana
, ed., Beijing, Oct. 7–11,
Higher Education Press
,
Beijing, Peop. Rep. China
, pp.
341
347
.
137.
Beavers
,
G.
, and
Josef
,
D. D.
, 1967, “
Boundary Conditions at a Naturally Permeable Wall
,”
J. Fluid Mech.
0022-1120,
30
, pp.
197
207
.
138.
Derjaguin
,
B. V.
,
Nerpin
,
S. V.
, and
Churaev
,
N. V.
, 1965, “
Effect of Film Transfer Upon Evaporation of Liquids From Capillaries
,”
Bulletin Rilem
,
29
, pp.
93
98
.
139.
Potash
,
M.
, Jr.
, and
Wayner
,
P. C.
, Jr.
, 1972, “
Evaporation From a Two Dimensional Extended Meniscus
,”
Int. J. Heat Mass Transfer
0017-9310,
15
, pp.
1851
1863
.
140.
Raif
,
R. J.
, and
Wayner
,
P. C.
, Jr.
, 1973, “
Evaporation From a Porous Flow Control Element on a Porous Heat Source
,”
Int. J. Heat Mass Transfer
0017-9310,
16
, pp.
1919
1929
.
141.
Kamotani
,
Y.
, 1978, “
Evaporator Film Coefficients of Grooved Heat Pipes
,”
Proceedings of the 3rd International Heat Pipe Conference
,
American Institute of Aeronautics and Astronautics
, Pale Alto, pp.
128
130
.
142.
Renk
,
F. J.
, and
Wayner
,
P. C.
, Jr.
, 1979, “
An Evaporating Ethanol Meniscus, Part II: Analytical Studies
,”
J. Heat Transfer
0022-1481,
101
, pp.
59
62
.
143.
Wayner
,
P. C.
, Jr.
,
Kao
,
Y. K.
, and
LaCroix
,
L. V.
, 1996, “
The Interline Heat Transfer Coefficient of an Evaporating Wetting Film
,”
Int. J. Heat Mass Transfer
0017-9310,
19
, pp.
487
492
.
144.
Holm
,
F. W.
, and
Goplen
,
S. P.
, 1979, “
Heat Transfer in the Meniscus Thin Film Region
,”
J. Heat Transfer
0022-1481,
101
, pp.
543
547
.
145.
Mirzamoghadam
,
A. V.
, and
Catton
,
I.
, 1988, “
A Physical Model of the Evaporating Meniscus
,”
J. Heat Transfer
0022-1481,
110
, pp.
201
207
.
146.
Stephan
,
P.
, and
Busse
,
C. A.
, 1992, “
Analysis of the Heat Transfer Coefficient of Grooved Heat Pipe Evaporator Walls
,”
Int. J. Heat Mass Transfer
0017-9310,
35
, pp.
383
391
.
147.
Swanson
,
L. W.
, and
Herdt
,
G. C.
, 1992, “
Model of the Evaporating Meniscus in a Capillary Tube
,”
J. Heat Transfer
0022-1481,
114
, pp.
434
441
.
148.
Brown
,
J. R.
, and
Chang
,
W. S.
, 1993, “
Heat Transfer From Stable Evaporating Thin Films in the Neighborhood of a Contact Line
,”
Proceedings National Heat Transfer Conference
,
Atlanta, GA
, August 8–11.
149.
DasGupta
,
S.
,
Kim
,
I. Y.
, and
Wayner
,
P. C.
, Jr.
, 1994, “
Use of the Kelvin–Clapeyron Equation to Model an Evaporating Curved Microfilm
,”
J. Heat Transfer
0022-1481,
116
, pp.
1007
1015
.
150.
Swanson
,
L. W.
, and
Peterson
,
G. P.
, 1995, “
The Interfacial Thermodynamics of Micro Heat Pipes
,”
J. Heat Transfer
0022-1481,
115
, pp.
195
201
.
151.
Wayner
,
P. C.
, Jr.
, 1999, “
Intermolecular Forces in Phase-Change Heat Transfer: 1998 Kern Award Review
,”
AIChE J.
0001-1541,
45
, pp.
2055
2068
.
152.
Sharp
,
R. R.
, 1964, “
The Nature of Liquid Film Evaporation During Nucleate Boiling
,” Paper No. NASA-TN-D1997, NASA, Washington, D.C.
153.
Jawurek
,
H. H.
, 1969, “
Simultaneous Determination of Microlayer Geometry and Bubble Growth in Nucleate Boiling
,”
Int. J. Heat Mass Transfer
0017-9310,
12
, pp.
843
848
.
154.
Voutsinos
,
C. M.
, and
Judd
,
R. L.
, 1975, “
Laser Interferometric Investigation of the Microlayer Evaporation Phenomena
,”
J. Heat Transfer
0022-1481,
97
, pp.
88
93
.
155.
Cook
,
R.
,
Tung
,
C. Y.
, and
Wayner
,
P. C.
, Jr.
, 1981, “
Use of Scanning Microphotometer to Determine the Evaporative Heat Transfer Characteristics of the Contact Line Region
,”
J. Heat Transfer
0022-1481,
103
, pp.
325
330
.
156.
Wayner
,
P. C.
, Jr.
,
Tung
,
C. Y.
,
Tirumala
,
M.
, and
Yang
,
J. H.
, 1985, “
Experimental Study of Evaporation in the Contact Line Region of a Thin Film of Hexane
,”
J. Heat Transfer
0022-1481,
107
, pp.
182
189
.
157.
Chebaro
,
H. C.
,
Hallinan
,
K. P.
,
Kim
,
S. F.
, and
Chang
,
W. S.
, 1993, “
Evaporation From a Porous Wick Heat Pipe for Nonisothermal Interfacial Conditions
,”
Proceedings National Heat Transfer Conference
,
Atlanta, GA
, August 8–11.
158.
Kim
,
I. Y.
, and
Wayner
,
P. C.
, Jr.
, 1996, “
Shape of an Evaporating Completely Wetting Extended Meniscus
,”
J. Thermophys. Heat Transfer
0887-8722,
10
, pp.
320
325
.
159.
Karthikeyan
,
M.
,
Huang
,
J.
,
Plawsky
,
J. L.
, and
Wayner
,
P. C.
, Jr.
, 1998, “
Experimental Study and Modeling of the Intermediate Section of the Nonisothermal Constrained Vapor Bubble
,”
J. Heat Transfer
0022-1481,
120
, pp.
166
173
.
160.
Kihm
,
K. D.
, and
Pratt
,
D. M.
, 1999, “
Contour Mapping of Thin Liquid Film Thickness Using Fizeau Interferometer
,”
Proceedings of the 33rd National Heat Transfer Conference
,
Albuquerque, NM
, August 15–17, Paper No. NHTC99-224.
161.
Wang
,
Y.-X.
,
Plawsky
,
J.
, and
Wayner
,
P. C.
, Jr.
, 2000, “
Heat and Mass Transfer in a Vertical Constrained Vapor Bubble Heat Exchanger Using Ethanol
,”
Proceedings of the 34th National Heat Transfer Conference
,
Pittsburgh, PA
, August 20–22, Paper No. NHTC2000-12201.
162.
Wang
,
Y.-X.
,
Plawsky
,
J. L.
, and
Wayner
,
P. C.
, Jr.
, 2001, “
Optical Measurement of Microscale Transport Processes in Dropwise Condensation
,”
Microscale Thermophys. Eng.
1089-3954,
1
, pp.
55
69
.
163.
Jiang
,
P.
, and
Carey
,
V. P.
, 2001, “
Parallelized DSMC Modeling of Transport Near Liquid-Vapor Interfaces in a Micro Bubble Heat Pipe
,”
HTD (Am. Soc. Mech. Eng.)
0272-5673,
369
(
3
), pp.
1
13
.
164.
Brennan
,
P. J.
, and
Kroliczek
,
E. J.
, 1979,
Heat Pipe Design Handbook
,
B&K Engineering
,
Towson, MD
.
165.
Cotter
,
T. P.
, 1964, “
Theory of Heat Pipes
,” Los Alamos National Laboratory Report No. LA-3246-MS, The University of California, Los Alamos, NM.
166.
Chisholm
,
D.
, 1971,
The Heat Pipe
,
Mills and Boon
,
London, UK
.
167.
Tien
,
C. I.
, 1975, “
Fluid Mechanics of Heat Pipes
,”
Annu. Rev. Fluid Mech.
0066-4189,
2
, pp.
167
186
.
168.
Feldman
,
K. T.
, 1976,
The Heat Pipe: Theory, Design and Applications
,
Technology Application Center
, University of New Mexsico:
Albuquerque, NM
.
169.
Faghri
,
A.
, 1989, “
Performance Characteristics of a Concentric Annular Heat Pipe Part II: Vapor Flow Analysis
,”
J. Heat Transfer
0022-1481,
111
, pp.
851
857
.
170.
Zhang
,
L. A.
,
Wang
,
E. N.
,
Goodson
,
K. E.
,
et al.
, 2005, “
Phase Change Phenomena in Silicon Microchannels
,”
Int. J. Heat Mass Transfer
0017-9310,
48
(
8
), pp.
1572
1582
.
171.
Hetsroni
,
G.
,
Klein
,
D.
,
Mosyak
,
A.
,
et al.
, 2004, “
Convective Boiling in Parallel Microchannels
,”
Microscale Thermophys. Eng.
1089-3954,
8
(
4
), pp.
403
421
.
172.
Peng
,
X. F.
,
Peterson
,
G. P.
, and
Wang
,
B. X.
, 1996, “
Flow Boiling of Binary Mixtures in Microchanneled Plates
,”
Int. J. Heat Mass Transfer
0017-9310,
39
(
6
), pp.
1257
1264
.
173.
Coleman
,
J. W.
, and
Garimella
,
S.
, 1999, “
Characterization of Two-Phase Flow Patterns in Small Diameter Round and Rectangular Tubes
,”
Int. J. Heat Mass Transfer
0017-9310,
42
(
15
), pp.
2869
2881
.
174.
Chen
,
Y. P.
, and
Cheng
,
P.
, 2005, “
Condensation of Steam in Silicon Microchannels
,”
Int. Commun. Heat Mass Transfer
0735-1933,
32
(
1–2
), pp.
175
183
.
175.
Tien
,
C. L.
, and
Chung
,
K. S.
, 1979, “
Entrainment Limits in Heat Pipes
,”
AIAA J.
0001-1452,
17
(
6
), pp.
643
646
.
176.
Kim
,
B. H.
, and
Peterson
,
G. P.
, 1995, “
Analysis of the Critical Weber Number at the Onset of Liquid Entrainment in Capillary-Driven Heat Pipes
,”
Int. J. Heat Mass Transfer
0017-9310,
38
(
8
), pp.
1427
1442
.
177.
DasGupta
,
S.
,
Schonberg
,
J. A.
,
Kim
,
I. Y.
, and
Wayner
,
P. C.
, Jr.
, 1993, “
Use of Augmented Yong-Laplace Equation to Model Equilibrium and Evaporation Extended Meni-sci
,”
J. Colloid Interface Sci.
0021-9797,
157
, pp.
332
342
.
178.
DasGupta
,
S.
,
Schonberg
,
J. A.
, and
Wayner
,
P. C.
, Jr.
, 1993, “
Investigation of an Evaporative Extended Meniscus Based on the Augmented Yong-Laplace Equation
,”
J. Heat Transfer
0022-1481,
115
, pp.
201
208
.
179.
Gee
,
M. L.
,
Hearly
,
T. W.
, and
White
,
L. R.
, 1989, “
Ellipsometric Studies of Alkenes Adsorption on Quartz
,”
J. Colloid Interface Sci.
0021-9797,
131
(
1
), pp.
18
23
.
180.
Gokhale
,
S.
,
Plawsky
,
J. L.
,
Wayner
,
P. C.
, Jr.
, and
DasGupta
,
S.
, 2004, “
Inferred Pressure Gradient and Fluid Flow in a Condensing Sessile Droplet Based on the Measured Thickness Profile
,”
Phys. Fluids
1070-6631,
16
(
6
), pp.
1942
1955
.
181.
Moosman
,
S.
, and
Homsy
,
S. M.
, 1980, “
Evaporating Menisci of Wetting Fluids
,”
J. Colloid Interface Sci.
0021-9797,
73
, pp.
212
223
.
182.
Troung
,
J. G.
, and
Wayner
,
P. C.
, Jr.
, 1981, “
Effects of Capillary and Vander Waals Dispersion Forces on the Equilibrium Profile of a Wetting Liquid: Theory and Experimental
,”
J. Chem. Phys.
0021-9606,
87
, pp.
4180
4188
.
183.
Zheng
,
L.
,
Plawsky
,
J. L.
,
Wayner
,
P. C.
, Jr.
, and
DasGupta
,
S.
, 2004, “
Stability and Oscillations in an Evaporating Corner Meniscus
,”
J. Heat Transfer
0022-1481,
126
, pp.
169
178
.
184.
Peles
,
Y. P.
, and
Haber
,
S.
, 2000, “
A Steady State, One Dimensional, Model for Boiling Two Phase Flow in Triangular Micro-Channel
,”
Int. J. Multiphase Flow
0301-9322,
26
, pp.
1095
1115
.
185.
Zhao
,
T. S.
, and
Liao
,
Q.
, 2002, “
Theoretical Analysis of Film Condensation Heat Transfer Inside Vertical Mini Triangular Channels
,”
Int. J. Heat Mass Transfer
0017-9310,
45
(
13
), pp.
2829
2842
.
186.
Du
,
X. Z.
, and
Zhao
,
T. S.
, 2003, “
Analysis of Film Condensation Heat Transfer Inside a Vertical Micro Tube With Consideration of the Meniscus Draining Effect
,”
Int. J. Heat Mass Transfer
0017-9310,
46
(
24
), pp.
4669
4679
.
187.
Yu
,
Z.
,
Kelvin
,
P. H.
, and
Kashani
,
P.
, 2003, “
Temperature Control of Electrohydrodynamic Micro Heat Pipe
,”
Exp. Therm. Fluid Sci.
0894-1777,
27
, pp.
867
875
.
188.
Suman
,
B.
, 2005, “
A Steady State Model and Maximum Heat Transport Capacity of an Electrodynamically Augmented Micro-Grooved Heat Pipe
,”
Int. J. Heat Mass Transfer
0017-9310,
49
, pp.
3957
3967
.
189.
Suman
,
B.
, 2005, “
Effect of Surface Tension Gradient on the Performance of a Micro Heat Pipe: An Analytical Study
,”
ASME J. Heat Transfer
0022-1481, submitted.
190.
Daniel
,
S.
,
Chaudhury
,
M. K.
, and
Chen
,
J. C.
, 2001, “
Fast Drop Motion Resulting From the Phase Change on a Gradient Surface
,”
Science
0036-8075,
291
, p.
633
.
191.
Riabov
,
V. V.
, and
Provotorov
,
V. P.
, 1995, “
Modeling of Heat Transfer Processes at Catalytic Materials in Shock Tube
,”
J. Thermophys. Heat Transfer
0887-8722,
9
(
2
), pp.
363
365
.
192.
Tien
,
C. L.
,
Majumdar
,
A.
, and
Gerner
,
F. M.
, 1998,
Microscale Energy Transport
,
Taylor & Francis
,
Washington, D.C
.
193.
Chen
,
G.
, 2007,
Nanoscale Heat Transfer and Energy Conversion
,
Oxford University Press
,
Oxford, UK
, in press.
194.
Goodson
,
K. E.
, and
Ju
,
Y. S.
, 1999, “
Heat Conduction in Novel Electronic Films
,”
Annu. Rev. Mater. Sci.
0084-6600,
29
, p.
261
.
195.
Chen
,
G.
, 1996, “
Heat Transfer in Micro- and Nanoscale Photonic Devices
,”
Annu. Rev. Heat Transfer
1049-0787,
7
, p.
1
.
196.
G.
Chen
, 2001,
Recent Trends in Thermoelectric Materials Research III
,
Semiconductors and Semimetals Series
,
T. M.
Tritt
, ed.,
Academic Press
,
San Diego, CA
, Vol.
71
, pp.
p.
203
.
197.
Chen
,
G.
, and
Shakouri
,
A.
, 2002, “
Heat Transfer in Nanostructures for Solid-State Energy Conversion
,”
ASME J. Heat Transfer
0022-1481,
124
, p.
242
.
198.
DiMatteo
,
R. S.
,
Greiff
,
P.
,
Finberg
,
S. L.
,
Young-Waithe
,
K.
,
Choy
,
H. K. H.
,
Masaki
,
M. M.
, and
Fonstad
,
C. G.
, 2001, “
Enhanced Photogeneration of Carriers in a Semiconductor via Coupling Across a Nonisothermal Nanoscale Vacuum Gap
,”
Appl. Phys. Lett.
0003-6951,
79
, p.
1894
.
199.
Li
,
Q.
,
Tsay
,
Y. N.
,
Suenaga
,
M.
,
Wirth
,
G.
,
Gu
,
G. D.
, and
Koshizuka
,
N.
, 1999, “
Superconducting Transport Properties of 2.2-GeV Au-Ion Irradiated c-Axis Twist Bi2Sr2CaCu2O8+δBicrystal
s,”
Appl. Phys. Lett.
0003-6951,
74
, p.
1323
1325
.
200.
Flik
,
M. I.
,
Choi
,
B. I.
, and
Goodson
,
K. E.
, 1992, “
Heat Transfer Regimes in Microstructures
,”
Trans. ASME, Ser. C: J. Heat Transfer
0022-1481,
114
, p.
666
.
201.
Tien
,
C. L.
, and
Chen
,
G.
, 1994, “
Challenges in Microscale Conductive and Radiative Heat Transfer
,”
Trans. ASME, Ser. C: J. Heat Transfer
0022-1481,
116
, p.
799
.
202.
Chen
,
G.
, 2001,
Semiconductors and Semimetals
, Vol.
71
,
D. G.
Cahill
, ed.,
Academic
,
San Diego, CA
, p.
203
.
203.
Cahill
,
D. G.
,
Ford
,
W. K.
,
Goodson
,
K. E.
,
Mahan
,
G. D.
,
Majumdar
,
A.
,
Maris
,
H. J.
, and
Merlin
,
R.
, 2003, “
Nanoscale Thermal Transport
,”
J. Appl. Phys.
0021-8979,
93
, p.
793
818
.
204.
Polder
,
D.
, and
Van Hove
,
M.
, 1971, “
Theory of Radiative Heat Transfer Between Closely Spaced Bodies
,”
Phys. Rev. B
0556-2805,
4
, p.
3303
3314
.
This content is only available via PDF.
You do not currently have access to this content.