Friction is a very complicated phenomenon arising at the contact of surfaces. Experiments indicate a functional dependence upon a large variety of parameters, including sliding speed, acceleration, critical sliding distance, temperature, normal load, humidity, surface preparation, and, of course, material combination. In many engineering applications, the success of models in predicting experimental results remains strongly sensitive to the friction model. Furthermore, a broad cross section of engineering and science disciplines have developed interesting ways of representing friction, with models originating from the fundamental mechanics areas, the system dynamics and controls fields, as well as many others. A fundamental unresolved question in system simulation remains: what is the most appropriate way to include friction in an analytical or numerical model, and what are the implications of friction model choice? This review article draws upon the vast body of literature from many diverse engineering fields and critically examines the use of various friction models under different circumstances. Special focus is given to specific topics: lumped-parameter system models (usually of low order)—use of various types of parameter dependence of friction; continuum system models—continuous interface models and their discretization; self-excited system response—steady-sliding stability, stick/slip, and friction model requirements; and forced system response—stick/slip, partial slip, and friction model requirements. The conclusion from this broad survey is that the system model and friction model are fundamentally coupled, and they cannot be chosen independently. Furthermore, the usefulness of friction model and the success of the system dynamic model rely strongly on each other. Across disciplines, it is clear that multi-scale effects can dominate performance of friction contacts, and as a result more research is needed into computational tools and approaches capable of resolving the diverse length scales present in many practical problems. There are 196 references cited in this review-article.
Issue Section:
Review Articles
Topics:
Friction
1.
Coulomb CA (1785), Theorie des machines simples, Memoirs de Mathematique et de Physique de l’Academie Royale, 161–342.
2.
Kalker JJ (1990), Three-Dimensional Elastic Bodies in Rolling Contact. Dordrecht, Kluwer Academic Publishers, Boston.
3.
Ibrahim
RA
(1994
), Friction-induced vibration, chatter, squeal, and chaos: Part I-Mechanics of contact and friction
, Appl. Mech. Rev.
47
(7
), 209
–226
.4.
Ibrahim
RA
(1994
), Friction-induced vibration, chatter, squeal, and chaos: Part II-Dynamics and modeling
, Appl. Mech. Rev.
47
(7
), 227
–253
.5.
Ferri
AA
(1994
), Friction damping and isolation systems
, ASME Special 50th Anniversary Design Issue
117
, 196
–206
.6.
Feeny
B
, Guran
A
, Hinrichs
N
, and Popp
K
(1998
), A historical review on dry friction and stick-slip phenomena
, Appl. Mech. Rev.
51
, 321
–341
.7.
Back N, Burdekin M, and Cowley, A (1973), Review of the research on fixed and sliding joints, Proc of 13th Int Machine Tool Design and Research Conf, SA Tobias and F Koenigsberger (eds), MacMillan, London, 87–97.
8.
Beards
CF
(1983
), The damping of structural vibration by controlled interfacial slip in joints
, ASME J. Vib., Acoust., Stress, Reliab. Des.
105
, 369
–373
.9.
Goodman LE (1959), A review of progress in analysis of interfacial slip damping, Structural Damping, JE Ruzicka (ed), ASME, 36–48.
10.
Ungar
E
(1973
), The status of engineering knowledge concerning the damping of built-up structures
, J. Sound Vib.
26
(1
), 141
–154
.11.
Sampson
JB
, Morgan
F
, Reed
DW
, and Muskat
M
(1943
), Friction behavior during the slip portion of the stick-slip process
, Journal of Applied Physics
14
(12
), 689
–700
.12.
Rabinowicz E (1958), The intrinsic variables affecting the stick-slip process, Proc of Physical Society of London, 471, 668–675.
13.
Bell R and Burdekin M (1969–1970), A study of the stick-slip motion of machine tool feed drives, Proc. of Inst. of Mech. Eng. 184(1), 543–557.
14.
Hess
DP
and Soom
A
(1990
), Friction at lubricated line contact operating at oscillating sliding velocities
, ASME J. Tribol.
112
, 147
–152
.15.
Hunt
JB
, Torbe
I
, and Spencer
GC
(1965
), The phase-plane analysis of sliding motion
, Wear
8
, 455
–465
.16.
Pavelescu
D
and Tudor
A
(1987
), The sliding friction coefficient-its evolution and usefulness
, Wear
120
, 321
–336
.17.
Lin
Y-Q
and Wang
Y-H
(1991
), Stick-slip vibration in drill strings
, ASME J. Eng. Ind.
113
, 38
–43
.18.
Popp K (1992), Some model problems showing stick-slip motion and chaos, Friction-Induced Vibration, Chatter, Squeal, and Chaos, ASME, DE-Vol 49, 1–12.
19.
Bengisu MT and Akay A (1992), Stability of friction-induced vibrations in multi-degree-of-freedom systems, Friction-Induced Vibration, Chatter, Squeal, and Chaos, ASME, DE-Vol 49, 57–64.
20.
Bengisu MT and Akay A (1992), Interaction and stability of friction and vibrations, IL Singer and HM Pollock (eds), Fundamentals of Friction: Macroscopic and Microscopic Processes, Kluwer Academic Pub, 553–566.
21.
de Velde
FV
and Baets
PD
(1996
), Mathematical approach of the influencing factors on stick-slip induced by decelerative motion
, Wear
201
, 80
–93
.22.
Dupont
PE
(1994
), Avoiding stick-slip through pd control
, IEEE Trans. Autom. Control
39
(5
), 1094
–1097
.23.
Lim
YF
and Chen
K
(1998
), Dynamics of dry friction: A numerical investigation
, Phys. Rev. E
58
(5
), 5637
–5642
.24.
Rice
JR
and Ruina
AL
(1983
), Stability of steady frictional slipping
, ASME J. Appl. Mech.
50
, 343
–349
.25.
Gu
J-C
, Rice
JR
, Ruina
AL
, and Tse
ST
(1984
), Slip motion and stability of a single degree of freedom elastic system with rate and state dependent friction
, J. Mech. Phys. Solids
32
(3
), 167
–196
.26.
Tolstoi
DM
(1967
), Significance of the normal degree of freedom and natural normal vibrations in contact friction
, Wear
10
, 199
–213
.27.
Greenwood
JA
and Williamson
J
(1966
), Contact of nominally flat surfaces
, Proc. R. Soc. London, Ser. A
A295
, 300
–319
.28.
Nayak
PR
(1972
), Contact vibrations
, J. Sound Vib.
22
(3
), 297
–322
.29.
Gray
GG
, and Johnson
KL
(1972
), The dynamic response of elastic bodies in rolling contact to random roughness of their surfaces
, J. Sound Vib.
22
(3
), 323
–342
.30.
Godfrey
D
(1967
), Vibration reduces metal-to-metal contact and causes an apparent reduction in friction
, ASLE Trans.
10
, 183
–192
.31.
Antoniou
SS
, Cameron
A
, and Gentle
CR
(1976
), The friction-speed relation from stick-slip data
, Wear
36
, 235
–254
.32.
Sakamoto
T
(1987
), Normal displacement and dynamic friction characteristics in a stick-slip process
, Tribol. Int.
20
(1
), 25
–31
.33.
Bo
LC
and Pavelescu
D
(1982
), The friction-speed relation and its influence on the critical velocity of stick-slip motion
, Wear
82
, 277
–289
.34.
D’Souza
AF
and Dweib
AH
(1990
), Self-excited vibrations induced by dry friction, Part 1: Experimental study
, J. Sound Vib.
137
(2
), 163
–175
.35.
D’Souza
AF
and Dweib
AH
(1990
), Self-excited vibrations induced by dry friction, Part 2: Stability and limit-cycle analysis
, J. Sound Vib.
137
(2
), 177
–190
.36.
Soom
A
and Kim
C
(1983
), Interaction between dynamic normal and frictional forces during unlubricated sliding
, J. Lubr. Technol.
105
, 221
–229
.37.
Soom
A
and Kim
C
(1983
), Roughness-induced dynamic loading at dry and boundary lubricated sliding contacts
, J. Lubr. Technol.
105
, 514
–517
.38.
Anand
A
and Soom
A
(1984
), Roughness-induced transient loading at a sliding contact during start-up
, ASME J. Tribol.
106
, 49
–53
.39.
Soom
A
and Chen
JW
(1986
), Simulation of random surface roughness-induced contact vibrations at hertzian contacts during steady sliding
, ASME J. Tribol.
108
, 123
–127
.40.
Polycarpou
AA
and Soom
A
(1995
), Boundary and mixed friction in the presence of dynamic normal loads: Part I-System model
, ASME J. Tribol.
117
, 255
–260
.41.
Polycarpou
AA
and Soom
A
(1995
), Boundary and mixed friction in the presence of dynamic normal loads: Part II-Friction transients
, ASME J. Tribol.
117
, 261
–266
.42.
Polycarpou
AA
and Soom
A
(1995
), Two-dimensional models of boundary and mixed friction at a line contact
, ASME J. Tribol.
117
, 178
–184
.43.
Rice SL, Moslehy FA, and Elmi S (1993), Tribodynamic modeling, 19th Leeds-Lyon Symp-Thin Films in Tribology, D Dowson et al. (eds), Elsevier, New York, 641–648.
44.
Streator
JL
and Bogy
DB
(1992
), Accounting for transducer dynamics in the measurement of friction
, ASME J. Tribol.
114
, 86
–94
.45.
Oden
JT
and Martins
JAC
(1985
), Models and computational methods for dynamic friction phenomena
, Comput. Methods Appl. Mech. Eng.
52
, 527
–634
.46.
Hess
DP
and Soom
A
(1992
), Normal and angular motions at rough planar contacts during sliding with friction
, ASME J. Tribol.
114
, 567
–578
.47.
Jarvis
RP
and Mills
B
(1963
–64), Vibrations induced by dry friction
, Proc. of Inst. of Mech. Eng.
178
(32
), 847
–866
.48.
Earles
SWE
and Lee
CK
(1976
), Instabilities arising from the frictional interaction of a pin-disk system resulting in noise generation
, ASME J. Eng. Ind.
98
(1
), 81
–86
.49.
Earles SWE and Soar GB (1971), Squeal noise in disk brakes, Proc of Inst of Mech Eng, Vibration and Noise in Motor Vehicles, 61–69.
50.
Earles
SWE
and Badi
MNM
(1984
), Oscillatory instabilities generated in a double-pin and disc undamped system: A mechanism of disc-brake squeal
, Proc. Inst. Mech. Eng., Part C: Mech. Eng. Sci.
198C
, 43
–50
.51.
Swayze JL and Akay A (1992), Effects of systems dynamics on friction-induced oscillations, Friction-Induced Vibration, Chatter, Squeal, and Chaos, ASME, DE-Vol 49, 49–55.
52.
Martins
JAC
, Oden
JT
, and Simoes
FMF
(1990
), A study of static and kinetic friction
, Int. J. Eng. Sci.
28
, 29
–92
.53.
Tworzydlo
WW
, Becker
EB
, and Oden
JT
(1994
), Numerical modeling of friction-induced vibrations and dynamic instabilities
, Appl. Mech. Rev.
47
(7
), 255
–274
.54.
Tworzydlo
WW
and Becker
E
(1991
), Influence of forced vibrations on the static coefficient of friction-numerical analysis
, Wear
43
, 175
–196
.55.
Madakson
PB
(1983
), The frictional behavior of materials
, Wear
87
, 191
–206
.56.
Froslie LE, Milek T, and Smith EW (1973), Automatic transmission friction elements, Design Practices-Passenger Car Automatic Transmissions, Soc of Autom Eng, 535–552.
57.
Anderson
JR
, and Ferri
AA
(1990
), Behavior of a single-degree-of-freedom system with a generalized friction law
, J. Sound Vib.
140
(2
), 287
–304
.58.
Menq
C-H
, Griffin
JH
, and Bielak
J
(1986
), The influence of microslip on vibratory response, part ii: A comparison with experimental results
, J. Sound Vib.
107
(2
), 295
–307
.59.
Dupont
PE
, and Bapna
D
(1994
), Stability of sliding frictional surfaces with varying normal forces
, ASME J. Vibr. Acoust.
116
, 237
–242
.60.
Berger
EJ
, Krousgrill
CM
, and Sadeghi
F
(1997
), Stability of sliding in a system excited by a rough moving surface
, ASME J. Tribol.
119
(4
), 672
–680
.61.
den Hartog
JP
(1931
), Forced vibrations with combined coulomb and viscous damping
, ASME J. Appl. Mech.
APM-53-9
, 107
–115
.62.
Blok
H
(1940
), Fundamental aspects of boundary friction
, J. Soc. Autom. Eng.
46
, 275
–279
.63.
Derjaguin BV, Push VE, and Tolstoi DM (1957), A theory of stick-slip sliding in solids, Proc Conf on Lubrication and Wear, 257–268.
64.
Brockley
CA
, Cameron
R
, and Potter
AF
(1967
), Friction-induced vibration
, J. Lubr. Technol.
89
, 101
–108
.65.
Brockley
CA
and Ko
PL
(1970
), Quasi-harmonic friction-induced vibration
, J. Lubr. Technol.
92
, 550
–556
.66.
Pfeiffer F and Glocker C (1996), Multibody Dynamics with Unilateral Contacts, Wiley Series in Nonlinear Science, John Wiley and Sons, New York.
67.
Guran A, Pfeiffer F, and Popp K (1996), Dynamics with Friction-Modeling, Analysis, and Experiment, Part I, World Sc, Singapore.
68.
Popp
K
(1995
), Dynamical behaviour of a friction oscillator with simultaneous self and external excitation
, Sadhana: Proc., Indian Acad. Sci.
20
(2–4
), 627
–654
.69.
Budd
C
and Dux
F
(1994
), Chattering and related behavior in impact oscillators
, Philos. Trans. R. Soc. London, Ser. A
A347
(1683
), 365
–389
.70.
Foale
S
and Bishop
SR
(1992
), Dynamical complexities of forced impacting systems
, Philos. Trans. R. Soc. London, Ser. A
A338
(1651
), 547
–556
.71.
Bishop
SR
(1994
), Impact oscillators
, Philos. Trans. R. Soc. London, Ser. A
A347
(1683
), 347
–351
.72.
Hinrichs
N
, Oestreich
M
, and Popp
K
(1997
), Dynamics of oscillators with impact and friction
, Chaos, Solitons, Fractals
8
(4
), 535
–558
.73.
Hinrichs
N
, Oestreich
M
, and Popp
K
(1998
), On the modeling of friction oscillators
, J. Sound Vib.
216
(3
), 435
–459
.74.
Popp
K
(1998
), Non-smooth mechanical systems-an overview
, Forschung im Ingenieurwesen
64
, 223
–239
.75.
Haessig
DA
and Friedland
B
(1991
), On the modeling and simulation of friction
, ASME J. Dyn. Syst., Meas., Control
113
, 354
–362
.76.
Armstrong-He´louvry B (1991), Control of Machines with Friction, Kluwer Academic Publ, Boston.
77.
Armstrong-He´louvry
B
(1993
), Stick slip and control in low-speed motion
, IEEE Trans. Autom. Control
38
(10
), 1483
–1496
.78.
Armstrong-He´louvry
B
, Dupont
P
, and Canudas de Wit
C
(1994
), Friction in servo machines: Analysis and control methods
, Appl. Mech. Rev.
47
(7
), 275
–305
.79.
Armstrong-He´louvry
B
, Dupont
P
, and Canudas de Wit
C
(1994
), A survey of models, analysis tools and compensation methods for control of machines with friction
, Automatica
30
(7
), 1083
–1138
.80.
Canudas de Wit
C
, Olsson
H
, A˚stro¨m
KJ
, and Lischinsky
P
(1995
), A new model for control of systems with friction
, IEEE Trans. Autom. Control
40
(3
), 419
–425
.81.
Canudas de Wit C and Tsiotras P (1999), Dynamic tire friction model for vehicle traction control, Proc of 38th Conf on Decision and Control, 3746–3751.
82.
Taylor JH (1994), A modeling language for hybrid systems, Proc of the Joint Symp of Computer-Aided Control System Design, 337–344.
83.
Taylor JH (1995), Rigorous handling of state events in matlab, Proc of IEEE Conf on Control Applications, 156–161.
84.
Taylor JH and Kebede D (1995), Modeling and simulation of hybrid system, Proc of IEEE Conf on Decision and Control, 2685–2687.
85.
Taylor JH (1999), Tools for Modeling and Simulation of Hybrid Systems-A Tutorial Guide, Univ of New Brunswick, available at http://www.unb.edu.ca/jtaylor/HS_software.html.
86.
Hou
L
and Michel
AN
(1998
), Stability theory for hybrid dynamical systems
, IEEE Trans. Autom. Control
43
(4
), 461
–474
.87.
Mindlin
RD
(1949
), Compliance of elastic bodies in contact
, ASME J. Appl. Mech.
16
, 259
–268
.88.
Oden
JT
and Pires
EB
(1983
), Nonlocal and nonlinear friction laws and variational principles for contact problems in elasticity
, ASME J. Appl. Mech.
50
, 67
–76
.89.
Oden
JT
and Pires
EB
(1983
), Numerical analysis of certain contact problems with non-classical friction laws
, Comput. Struct.
16
, 471
–478
.90.
Oden
JT
and Pires
EB
(1984
), Algorithms and numerical results for finite element approximations of contact problems with non-classical friction laws
, Comput. Struct.
19
(1-2
), 137
–147
.91.
Greenwood
JA
(1997
), Adhesion of elastic solids
, Proc. R. Soc. London, Ser. A
A453
, 1277
–1297
.92.
Adams
GG
(1995
), Self-excited oscillations of two elastic half-spaces sliding with a constant coefficient of friction
, ASME J. Appl. Mech.
62
, 867
–872
.93.
Adams
GG
(1999
), Dynamic motion of two elastic half-spaces in relative sliding without slipping
, ASME J. Tribol.
121
(3
), 455
–461
.94.
Adams
GG
(1998
), Steady sliding of two elastic half-spaces with friction reduction due to interface stick-slip
, ASME J. Appl. Mech.
65
, 470
–475
.95.
Ruiz
C
, Boddington
PHB
, and Chen
KC
(1984
), An investigation of fatigue and fretting in a dovetail joint
, Exp. Mech.
24
, 208
–217
.96.
Ruiz C and Chen KC (1986), Life assessment of dovetail joints between blades and disks in aero-engines, Proc of Int Conf on Fatigue: Fatigue of Engineering Materials and Structures, Inst of Mech Eng, 187–194.
97.
Nix
KJ
and Lindley
TC
(1988
), The influence of relative slip range and contact material on the fretting fatigue properties of 3.5nicrmov rotor steel
, Wear
125
, 147
–162
.98.
Kuno
M
, Waterhouse
RB
, Nowell
D
, and Hills
DA
(1989
), Initiation and growth of fretting fatigue cracks in the partial slip regime
, Fatigue Fract. Eng. Mater. Struct.
12
(5
), 387
–398
.99.
Nowell
D
and Hills
DA
(1990
), Crack initiation criteria in fretting contact
, Wear
136
, 329
–343
.100.
Waterhouse
RB
(1992
), Fretting fatigue
, Int. Mater. Rev.
37
(2
), 77
–97
.101.
Hills
DA
, Nowell
D
, and O’Connor
JJ
(1988
), On the mechanics of fretting fatigue
, Wear
125
, 129
–146
.102.
Bramhall R (1973), Studies in Fretting Fatigue, PhD thesis, Oxford Univ.
103.
Hills
DA
(1994
), Mechanics of fretting fatigue
, Wear
175
, 107
–113
.104.
Cattaneo
C
(1938
), Sul contatto di due corpi elastici: Distribuzione locale degli sforzi
, Rendiconti dell’Accademia Nazionale dei Lincei
27
, 342
–348
, 434–436, 474–478.105.
Nowell
D
and Hills
DA
(1987
), Mechanics of fretting fatigue tests
, Int. J. Mech. Sci.
29
(5
), 355
–365
.106.
Szolwinski
MP
and Farris
TN
(1996
), Mechanics of fretting fatigue crack formation
, Wear
198
, 93
–107
.107.
So¨derberg
S
, Bryggman
U
, and McCullough
T
(1986
), Frequency effects in fretting wear
, Wear
110
, 19
–34
.108.
Bryggman
U
and So¨derberg
S
(1986
), Contact conditions in fretting
, Wear
110
, 1
–17
.109.
Bryggman
U
and So¨derberg
S
(1988
), Contact conditions and surface degradation mechanisms in low amplitude fretting
, Wear
125
, 39
–52
.110.
Vingsbo
O
and So¨derberg
S
(1988
), On fretting maps
, Wear
126
, 131
–147
.111.
Schouterden
K
, Blanpain
B
, C¸elis
JP
, and Vingsbo
O
(1995
), Fretting of titanium nitride and diamond-like carbon coatings at high frequencies and low amplitude
, Wear
181–183
, 86
–93
.112.
Rehbein
P
and Wallaschek
J
(1998
), Friction and wear behavior of polymer/steel and alumina/alumina under high-frequency fretting conditions
, Wear
216
, 97
–105
.113.
Caughey
TK
(1960
), Sinusoidal excitation of a system with bilinear hysteresis
, ASME J. Appl. Mech.
27
, 640
–643
.114.
Caughey
TK
(1960
), Random excitation of a system with bilinear hysteresis
, ASME J. Appl. Mech.
27
, 649
–652
.115.
Iwan
WD
(1965
), The steady-state response of a two-degree-of-freedom bilinear hysteretic system
, ASME J. Appl. Mech.
32
, 151
–156
.116.
Iwan
WD
(1965
), The steady-state response of a double bilinear hysteretic model
, ASME J. Appl. Mech.
32
, 921
–925
.117.
Iwan WD (1965), The dynamic response of the one-degree-of-freedom bilinear hysteretic system, Proc of 3rd World Congress on Earthquake Engineering, 2, 783–796.
118.
Iwan
WD
(1966
), A distributed-element model for hysteresis and its steady-state dynamic response
, ASME J. Appl. Mech.
33
, 893
–900
.119.
Iwan
WD
(1967
), On a class of models for the yielding behavior of continuous and composite systems
, ASME J. Appl. Mech.
34
, 612
–617
.120.
Masing
G
(1923
–1924), Zur hevnschen theorie der verfestigung der metalle durch verborgene elastische spannungen, (in German
), Wiss. Vero¨ffent. aus dem Siemens Konzern
3
, 135
–141
.121.
Byerlee
JD
and Brace
WF
(1968
), Stick-slip, stable sliding, and earthquakes-effect of rock type, pressure, strain rate and stiffness
, J. Geophys. Res.
73
, 6031
–6037
.122.
Byerlee
JD
(1970
), The mechanics of stick-slip
, Tectonophysics
9
, 475
–486
.123.
Dieterich
JH
(1978
), Time-dependent friction and the mechanisms of stick-slip
, Pure Appl. Geophys.
116
, 790
–806
.124.
Dieterich
JH
(1979
), Modeling of rock friction 1: Experimental results and constitutive equations
, J. Geophys. Res.
84
, 2161
–2168
.125.
Dieterich
JH
(1979
), Modeling of rock friction 2: Simulation of preseismic slip
, J. Geophys. Res.
84
, 2169
–2175
.126.
Ruina
AL
(1983
), Slip instability and state variable friction laws
, J. Geophys. Res.
88
, 10359
–10370
.127.
Ruina
AL
(1986
), Unsteady motions between sliding surfaces
, Wear
113
, 83
–86
.128.
Linker
M
and Dieterich
JH
(1992
), Effects of variable normal stress on rock friction: Observations and constitutive equations
, J. Geophys. Res., [Solid Earth]
97
, 4923
–4940
.129.
Rice
JR
(1993
), Spatio-temporal complexity of slip on a fault
, J. Geophys. Res., [Solid Earth]
98
(B6
), 9885
–9907
.130.
Ben-Zion
Y
and Rice
JR
(1997
), Dynamic simulations of slip on a smooth fault in an elastic solid
, J. Geophys. Res., [Solid Earth]
102
(B8
), 17771
–17784
.131.
Persson BNJ (2000), Sliding Friction: Physical Principles and Applications, Second Edition, Springer-Verlag.
132.
Mindlin
RD
and Dereciewicz
H
(1953
), Elastic spheres in contact under varying oblique forces
, ASME J. Appl. Mech.
20
, 327
–344
.133.
Goodman
LE
and Brown
CB
(1962
), Energy dissipation in contact friction: Constant normal and cyclic tangential loading
, ASME J. Appl. Mech.
29
, 17
–22
.134.
Johnson
KL
(1961
), Energy dissipation at spherical surfaces in contact transmitting oscillating forces
, J. Mech. Eng. Sci.
3
(4
), 362
–368
.135.
Shaw
SW
(1986
), On the dynamic response of a system with dry friction
, J. Sound Vib.
108
(2
), 305
–325
.136.
Beards
CF
and Woohat
A
(1985
), The control of frame vibrations by friction damping in joints
, ASME J. Vib., Acoust., Stress, Reliab. Des.
106
, 26
–32
.137.
Ferri AA and Heck BS (1995), Vibration analysis of dry friction damped turbine blades using singular perturbation theory, Proc of ASME Int Mech Eng Congress and Exposition, AMD-Vol 192, ASME, New York, 47–56.
138.
Griffin
JH
(1980
), Friction damping of resonant stresses in gas turbine engine airfoils
, ASME J. Eng. Power
102
, 329
–333
.139.
Pierre
C
, Ferri
AA
, and Dowell
EH
(1985
), Multi-harmonic analysis of dry friction damped systems using an incremental harmonic balance method
, ASME J. Appl. Mech.
52
, 958
–964
.140.
Wang
JH
and Chen
WK
(1993
), Investigation of the vibration of a blade with friction damper by hbm
, ASME J. Eng. Gas Turbines Power
115
, 294
–299
.141.
Dowell
EH
(1986
), Damping in beams and plates due to slipping at the support boundaries
, J. Sound Vib.
105
(2
), 243
–253
.142.
Dowell
EH
and Schwartz
HB
(1983
), Forced response of a cantilever beam with dry friction damper attached, Part I: Theory
, J. Sound Vib.
91
(2
), 255
–267
.143.
Dowell
EH
and Schwartz
HB
(1983
), Forced response of a cantilever beam with dry friction damper attached, Part II: Experiment
, J. Sound Vib.
91
(2
), 269
–291
.144.
Ferri
AA
and Bindemann
AC
(1992
), Damping and vibration of beams with various types of frictional support conditions
, ASME J. Vibr. Acoust.
114
, 289
–296
.145.
Makris
N
and Constantinou
MC
(1991
), Analysis of motion resisted by friction, I. constant coulomb and linear/coulomb friction
, Mech. Struct. Mach.
19
(4
), 477
–500
.146.
Makris
N
and Constantinou
MC
(1991
), Analysis of motion resisted by friction, II. Velocity-dependent friction
, Mech. Struct. Mach.
19
(4
), 501
–526
.147.
Gaul
L
and Nitsche
R
(2001
), The role of friction in mechanical joints
, Appl. Mech. Rev.
54
(2
), 93
–105
.148.
Gaul
L
and Nitsche
R
(2000
), Friction control for vibration suppression
, Mech. Syst. Signal Process.
14
(2
), 139
–150
.149.
Gaul
L
and Lenz
J
(1997
), Nonlinear dynamics of structures assembled by bolted joints
, Acta Mech.
125
(1–4
), 169
–181
.150.
Lenz J and Gaul L (1995), The influence of microslip on the dynamic behavior of bolted joints, Proc of 13th Int Modal Analysis Conf, Nashville, TN, 248–254.
151.
Johnson KL (1985), Contact Mechanics, Cambridge Univ Press, Great Britain.
152.
Sinha
A
and Griffin
JH
(1984
), Effects of static friction on the forced response of frictionally damped turbine blades
, ASME J. Eng. Gas Turbines Power
106
, 65
–69
.153.
Griffin
JH
and Sinha
A
(1985
), The interaction between mistuning and friction in the forced response of bladed disk assemblies
, ASME J. Eng. Gas Turbines Power
107
, 205
–211
.154.
Menq
C-H
and Griffin
JH
(1985
), A comparison of transient and steady state finite element analyses of the forced response of a frictionally damped beam
, ASME J. Vib., Acoust., Stress, Reliab. Des.
107
, 19
–25
.155.
Menq
C-H
, Griffin
JH
, and Bielak
J
(1986
), The influence of a variable normal load on the forced vibration of a frictionally damped structure
, ASME J. Eng. Gas Turbines Power
108
, 300
–305
.156.
Menq
C-H
, Bielak
J
, and Griffin
JH
(1986
), The influence of microslip on vibratory response, part i: A new microslip model
, J. Sound Vib.
107
(2
), 279
–293
.157.
Cameron TM, Griffin JH, Kielb RE, and Hoosac TM (1987), An integrated approach for friction damper design, ASME Design Booklet, The Role of Damping in Vibration and Noise Control, ASME DE-Vol 5, 205–211.
158.
Kielb RE, Griffin JH, and Menq C-H (1988), Evaluation of a turbine blade damper using an integral approach, AIAA/ASME/ASCE/AHS 29th Structures, Structural Dynamics and Materials Conf (AIAA 88-2400), 1495–1500.
159.
Muszynska
A
and Jones
DIG
(1983
), A parametric study of dynamic response of a discrete model of turbomachinery bladed disk
, ASME J. Vib., Acoust., Stress, Reliab. Des.
105
, 434
–443
.160.
Wang
JH
and Shieh
WL
(1991
), The influence of variable friction coefficient on the dynamic behavior of a blade with friction damper
, J. Sound Vib.
149
, 137
–145
.161.
Sanliturk
KY
, Imregun
M
, and Ewins
DJ
(1997
), Harmonic balance vibration analysis of turbine blades with friction dampers
, ASME J. Vibr. Acoust.
119
, 96
–103
.162.
Sanliturk
KY
and Ewins
DJ
(1996
), Modeling two-dimensional friction contact and its application using harmonic balance method
, J. Sound Vib.
193
, 511
–523
.163.
Whitehouse
DJ
and Archard
JF
(1970
), The properties of random surfaces of significance in their contact
, Proc. R. Soc. London, Ser. A
A316
(1524
), 97
–121
.164.
Whitehouse
DJ
and Phillips
MJ
(1978
), Discrete properties of random surfaces
, Philos. Trans. R. Soc. London, Ser. A
A290
(1369
), 267
–298
.165.
Whitehouse
DJ
and Phillips
MJ
(1982
), Two-dimensional discrete properties of random surfaces
, Philos. Trans. R. Soc. London, Ser. A
A305
(1490
), 441
–468
.166.
Kilburn
RF
(1974
), Friction viewed as a random process
, J. Lubr. Technol.
96
, 291
–299
.167.
Qiao
SL
and Ibrahim
RA
(1999
), Stochastic dynamics of systems with friction-induced vibration
, J. Sound Vib.
223
(1
), 115
–140
.168.
Ibrahim
RA
, Zielke
SA
, and Popp
K
(1999
), Characterization of interfacial forces in metal-to-metal contact under harmonic excitation
, J. Sound Vib.
220
(2
), 365
–377
.169.
Ibrahim
RA
, Madhavan
S
, Qiao
SL
, and Chang
WK
(2000
), Experimental investigation of friction-induced noise in disc brake systems
, Int. J. Veh. Des.
23
(3/4
), 218
–240
.170.
Mottershead
JE
, Ouyang
H
, Cartmell
MP
, and Friswell
MI
(1997
), Parametric resonances in an annular disc, with a rotating system of distributed mass and elasticity; and the effects of friction and damping
, Proc. R. Soc. London, Ser. A
A453
(1956
), 1
–19
.171.
Ouyang
H
, Mottershead
JE
, Cartmell
MP
, and Friswell
MI
(1998
), Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship
, J. Sound Vib.
209
(2
), 251
–264
.172.
Ouyang
H
, Mottershead
JE
, Cartmell
MP
, and Brookfield
DJ
(1999
), Friction-induced vibration of an elastic slider on a vibrating disc
, Int. J. Mech. Sci.
41
, 325
–336
.173.
Ouyang
H
, Mottershead
JE
, Brookfield
DJ
, and James
S
(2000
), A methodology for the determination of dynamic instabilities in a car disc brake
, Int. J. Veh. Des.
23
(3/4
), 241
–262
.174.
Lee
D
and Waas
AM
(1997
), Stability analysis of a rotating multi-layer annular plate with a stationary frictional follower load
, Int. J. Mech. Sci.
39
(10
), 1117
–1138
.175.
Brooks PC, Crolla DA, and Lang AM (1992), Sensitivity analysis of disc brake squeal, Proc of Int Symp on Advanced Vehicle Control, (AVEC’92), Yokohama, Japan, Paper No. 923005, 28–36.
176.
Brooks PC, Crolla DA, Lang AM, and Schafer DR (1993), Eigenvalue sensitivity analysis applied to disc brake squeal, Braking of Road Vehicles, Paper C444/004/93, Inst of Mech Eng, 135–143.
177.
Lang AM, Schafer DR, Newcomb TP, and Brooks PC (1993), Brake squeal-the influence of rotor geometry, Braking of Road Vehicles, Paper C444/016/93, Inst of Mech Eng, 161–171.
178.
Carpick
RW
and Salmeron
M
(1997
), Scratching the surface: Fundamental investigations of tribology with atomic force microscopy
, Chem. Rev.
97
, 1163
–1194
.179.
Bhushan
B
, Isrealachvili
JN
, and Landman
U
(1995
), Nanotribology: Friction, wear and lubrication at the atomic scale
, Nature (London)
374
, 607
–616
.180.
Bhushan
B
(1999
), Nanoscale tribophysics and tribomechanics
, Wear
225–229
, 465
–492
.181.
Johnson
KL
, Kendall
K
, and Roberts
AD
(1971
), Surface energy and the contact of elastic solids
, Proc. R. Soc. London, Ser. A
A324
, 301
–313
.182.
Tabor
D
(1977
), Surface forces and surface interactions
, J. Colloid Interface Sci.
58
, 2
–13
.183.
Johnson
KL
and Greenwood
JA
(1997
), An adhesion map for the contact of elastic spheres
, J. Colloid Interface Sci.
192
, 326
–333
.184.
Israelachvili
JN
(1992
), Adhesion forces between surfaces in liquids and condensable vapours
, Surf. Sci. Rep.
14
(3
), 109
–159
.185.
Yoshizawa
H
, McGuiggan
P
, and Israelachvili
JN
(1993
), Identification of a second dynamic state during stick-slip motion
, Science
259
, 1305
–1308
.186.
McClelland GM (1989), Adhesion and Friction, Springer Series in Surface Science, Springer, New York.
187.
Yoshizawa
H
, Chen
Y-L
, and Israelachvili
JN
(1993
), Recent advances in molecular level understanding of adhesion, friction and lubrication
, Wear
168
, 161
–166
.188.
Yoshizawa
H
and Israelachvili
JN
(1993
), Fundamental mechanisms of interfacial friction; stick-slip friction of spherical and chain molecules
, J. Phys. Chem.
97
, 11300
–11313
.189.
Mate
CM
, McClelland
GM
, Erlandsson
R
, and Chiang
S
(1987
), Atomic-scale friction of a tungsten tip on a graphite surface
, Phys. Rev. Lett.
59
(17
), 1942
–1945
.190.
Nayfeh AH (1981), Introduction to Perturbation Techniques, John Wiley and Sons, New York.
191.
Karnopp
D
(1985
), Computer simulation of stick-slip friction in mechanical dynamic systems
, ASME J. Dyn. Syst., Meas., Control
107
(1
), 100
–103
.192.
Pratt
TK
and Williams
R
(1981
), Non-linear analysis of stick-slip motion
, J. Sound Vib.
74
, 531
–542
.193.
Hutchinson
JW
and Jensen
HM
(1990
), Models of fiber debonding and pullout in brittle composites with friction
, Mech. Mater.
9
(2
), 139
–163
.194.
Sextro W (1999), Forced vibration of elastic structures with friction contacts, Proc of ASME Design Eng Tech Conf, DETC/VIB-8180, ASME, New York.
195.
Berger
EJ
, Begley
MR
, and Mahajani
M
(2000
), Structural dynamic effects on interface response—Formulation and simulation under partial slipping conditions
, J. Appl. Mech.
67
, 785
–792
.196.
Masri
SF
, Chassiakos
AG
, and Caughey
TK
(1993
), Identification of nonlinear dynamic systems using neural networks
, J. Appl. Mech.
60
(2
), 123
–133
. Copyright © 2002
by ASME
You do not currently have access to this content.
