Skip Nav Destination
Issues
June 1960
ISSN 0021-8936
EISSN 1528-9036
In this Issue
Research Papers
Note on the Assessment of Flow Disturbances at a Blunt Body Traveling at Supersonic Speeds Owing to Flow Disturbances in Free Stream
J. Appl. Mech. June 1960, 27(2): 223–229.
doi: https://doi.org/10.1115/1.3643942
Topics:
Flow (Dynamics)
,
Shock (Mechanics)
,
Fluctuations (Physics)
,
Pressure
,
Boundary layers
,
Entropy
,
Mach number
,
Reflection
,
Resonance
,
Shock waves
Possible Similarity Solutions for Laminar Free Convection on Vertical Plates and Cylinders
J. Appl. Mech. June 1960, 27(2): 230–236.
doi: https://doi.org/10.1115/1.3643943
Topics:
Cylinders
,
Natural convection
,
Vertical plates
,
Boundary layers
On the Annular Damper for a Freely Precessing Gyroscope
J. Appl. Mech. June 1960, 27(2): 237–240.
doi: https://doi.org/10.1115/1.3643944
Topics:
Dampers
,
Fluids
,
Dynamics (Mechanics)
,
Energy dissipation
,
Spin (Aerodynamics)
,
Spinning (Textile)
Heat Transfer for Laminar Flow in Ducts With Arbitrary Time Variations in Wall Temperature
J. Appl. Mech. June 1960, 27(2): 241–249.
doi: https://doi.org/10.1115/1.3643945
Topics:
Ducts
,
Heat transfer
,
Laminar flow
,
Wall temperature
,
Temperature
,
Fluids
,
Steady state
,
Transients (Dynamics)
,
Forced convection
A Study of the Stability of Externally Pressurized Gas Bearings
J. Appl. Mech. June 1960, 27(2): 250–258.
doi: https://doi.org/10.1115/1.3643946
Topics:
Bearings
,
Pressurized gas
,
Stability
,
Clearances (Engineering)
,
Compression
,
Equations of motion
,
Equilibrium (Physics)
,
Flow (Dynamics)
,
Nozzles
,
Pressure
On the Theoretical Analysis of a Dynamic Thermocouple: 2—The Continuous Area Interface
J. Appl. Mech. June 1960, 27(2): 259–262.
doi: https://doi.org/10.1115/1.3643947
Topics:
Theoretical analysis
,
Thermocouples
,
Metals
,
Temperature
,
Temperature distribution
,
Junctions
Normal Modes of Nonlinear Dual-Mode Systems
J. Appl. Mech. June 1960, 27(2): 263–268.
doi: https://doi.org/10.1115/1.3643948
Topics:
Linear systems
,
Springs
Classical Normal Modes in Damped Linear Dynamic Systems
J. Appl. Mech. June 1960, 27(2): 269–271.
doi: https://doi.org/10.1115/1.3643949
Topics:
Damped linear dynamic systems
,
Damping
The Vibration Response of a Linear Undamped System Resting on a Nonlinear Spring
J. Appl. Mech. June 1960, 27(2): 272–274.
doi: https://doi.org/10.1115/1.3643950
Topics:
Springs
,
Vibration
,
Displacement
,
Excitation
,
Linear systems
,
Steady state
The Approximate Analysis of Certain Boundary-Value Problems
J. Appl. Mech. June 1960, 27(2): 275–277.
doi: https://doi.org/10.1115/1.3643951
Topics:
Boundary-value problems
,
Plates (structures)
,
Torsion
,
Computers
,
Deflection
Stresses in a Slab Having a Spherical Cavity Under Circular Bending
J. Appl. Mech. June 1960, 27(2): 278–282.
doi: https://doi.org/10.1115/1.3643952
Topics:
Cavities
,
Slabs
,
Stress
,
Symmetry (Physics)
Elastic Equilibrium of a Plate With a Reinforced Elliptical Hole
J. Appl. Mech. June 1960, 27(2): 283–288.
doi: https://doi.org/10.1115/1.3643953
Topics:
Computers
,
Equilibrium (Physics)
,
Stress
A Method of Solution for the Elastic Quarter-Plane
J. Appl. Mech. June 1960, 27(2): 289–296.
doi: https://doi.org/10.1115/1.3643954
Topics:
Boundary-value problems
,
Stress
Thermal Stress in a Viscoelastic-Plastic Plate With Temperature-Dependent Yield Stress
J. Appl. Mech. June 1960, 27(2): 297–302.
doi: https://doi.org/10.1115/1.3643955
Topics:
Temperature
,
Thermal stresses
,
Yield stress
,
Stress concentration
,
Transients (Dynamics)
,
Cooling
,
Heat
,
Plastics
,
Plates (structures)
,
Residual stresses
Prediction of Creep Failure Time for Pressure Vessels
J. Appl. Mech. June 1960, 27(2): 303–308.
doi: https://doi.org/10.1115/1.3643956
Topics:
Creep
,
Failure
,
Pressure vessels
,
Stress
,
Vessels
,
Pressure
,
Fracture (Materials)
,
Fracture (Process)
,
Tension
,
Wall thickness
On the Plastic Behavior of Rotating Cylinders
J. Appl. Mech. June 1960, 27(2): 309–315.
doi: https://doi.org/10.1115/1.3643957
Topics:
Cylinders
,
Stress
,
Deformation
,
Failure
,
Fracture (Materials)
,
Fracture (Process)
,
Shear (Mechanics)
On the Optimum Design of Shells
J. Appl. Mech. June 1960, 27(2): 316–322.
doi: https://doi.org/10.1115/1.3643959
Yield Conditions for Rotationally Symmetric Shells Under Axisymmetric Loading
J. Appl. Mech. June 1960, 27(2): 323–331.
doi: https://doi.org/10.1115/1.3643960
Topics:
Shells
,
Approximation
,
Pressure
,
Stress
An Approximate Analysis of the Influence of Aerodynamic Heating and Initial Twist on the Torsional Stiffness of Thin Wings
J. Appl. Mech. June 1960, 27(2): 332–334.
doi: https://doi.org/10.1115/1.3643961
Topics:
Heating
,
Stiffness
,
Wings
,
Buckling
,
Chords (Trusses)
,
Fibers
,
Stress
,
Temperature
Postbuckling Behavior of Rectangular Plates With Small Initial Curvature Loaded in Edge Compression—(continued)
J. Appl. Mech. June 1960, 27(2): 335–342.
doi: https://doi.org/10.1115/1.3643962
Topics:
Compression
,
Plates (structures)
,
Stress
,
Boundary-value problems
,
Deflection
,
Shear (Mechanics)
The Junction Problem of Solid-Slotted Cylindrical Shells
J. Appl. Mech. June 1960, 27(2): 343–349.
doi: https://doi.org/10.1115/1.3643963
Technical Briefs
A Method of Numerical Evaluation of a Large Determinant
J. Appl. Mech. June 1960, 27(2): 350–351.
doi: https://doi.org/10.1115/1.3643964
Topics:
Computer programming
,
Vibration
On the Griffith-Irwin Fracture Theory
J. Appl. Mech. June 1960, 27(2): 352–353.
doi: https://doi.org/10.1115/1.3643965
Topics:
Fracture (Materials)
,
Fracture (Process)
On the Flexure of Plastic Plates
J. Appl. Mech. June 1960, 27(2): 353–354.
doi: https://doi.org/10.1115/1.3643966
Topics:
Bending (Stress)
,
Plates (structures)
Induced Velocities in the Two-Dimensional Cascade Theory
J. Appl. Mech. June 1960, 27(2): 355–356.
doi: https://doi.org/10.1115/1.3643967
Topics:
Cascades (Fluid dynamics)
The Relation Between Stress Concentration and Boundary Displacement for Simple Openings
J. Appl. Mech. June 1960, 27(2): 356–357.
doi: https://doi.org/10.1115/1.3643968
Topics:
Displacement
,
Stress concentration
Bending of an Isotropic Triangular Plate, Two of Whose Edges Are Simply Supported and the Third Clamped
J. Appl. Mech. June 1960, 27(2): 357–358.
doi: https://doi.org/10.1115/1.3643969
Simplified Analysis of a Thrust-Augmentation System
J. Appl. Mech. June 1960, 27(2): 358–359.
doi: https://doi.org/10.1115/1.3643970
Topics:
Thrust
Stress Concentration in a Rotating Disk With a Central Hole and Two Additional Symmetrically Located Holes
J. Appl. Mech. June 1960, 27(2): 359–360.
doi: https://doi.org/10.1115/1.3643971
Topics:
Rotating disks
,
Stress concentration
Discussions
Discussion: “Viscous Damping in Flexural Vibrations of Bars” (Newman, M. K., 1959, ASME J. Appl. Mech., 26, pp. 367–376)
J. Appl. Mech. June 1960, 27(2): 361.
doi: https://doi.org/10.1115/1.3643972
Closure to “Discussion of ‘Viscous Damping in Flexural Vibrations of Bars’” (1960, ASME J. Appl. Mech., 27, p. 361)
J. Appl. Mech. June 1960, 27(2): 361–362.
doi: https://doi.org/10.1115/1.3643973
Discussion: “On Supersonic Wind Tunnels With Low Free-Stream Disturbances” (Morkovin, M. V., 1959, ASME J. Appl. Mech., 26, pp. 319–324)
J. Appl. Mech. June 1960, 27(2): 362–363.
doi: https://doi.org/10.1115/1.3643974
Topics:
Wind tunnels
Closure to “Discussion of ‘On Supersonic Wind Tunnels With Low Free-Stream Disturbances’” (1960, ASME J. Appl. Mech., 27, pp. 362–363)
J. Appl. Mech. June 1960, 27(2): 363–364.
doi: https://doi.org/10.1115/1.3643975
Topics:
Wind tunnels
Closure to “Discussion of ‘The Determination of Safe Loads of Beams Subjected to Combined Twisting and Biaxial Bending Moments’” (1960, ASME J. Appl. Mech., 27, p. 364)
J. Appl. Mech. June 1960, 27(2): 364.
doi: https://doi.org/10.1115/1.3643977
Topics:
Stress
Discussion: “Determination of the Creep Deflection of a Rivet in Double Shear” (Marin, Joseph, 1959, ASME J. Appl. Mech., 26, pp. 285–290)
J. Appl. Mech. June 1960, 27(2): 364–365.
doi: https://doi.org/10.1115/1.3643978
Topics:
Creep
,
Deflection
,
Rivets
,
Shear (Mechanics)
Closure to “Discussion of ‘Determination of the Creep Deflection of a Rivet in Double Shear’” (1960, ASME J. Appl. Mech., 27, pp. 364–365)
J. Appl. Mech. June 1960, 27(2): 365.
doi: https://doi.org/10.1115/1.3643979
Topics:
Creep
,
Deflection
,
Rivets
Discussion: “Production of Rotation in a Confined Liquid Through Translational Motion of the Boundaries” (Berlot, R. R., 1959, ASME J. Appl. Mech., 26, pp. 513–516)
J. Appl. Mech. June 1960, 27(2): 365.
doi: https://doi.org/10.1115/1.3643981
Topics:
Rotation
Closure to “Discussions of ‘Production of Rotation in a Confined Liquid Through Translational Motion of the Boundaries’” (1960, ASME J. Appl. Mech., 27, p. 365)
J. Appl. Mech. June 1960, 27(2): 365–366.
doi: https://doi.org/10.1115/1.3643982
Topics:
Rotation
Discussion: “Transient Analysis of Stress-Wave Penetration in Plates” (Davids, Norman, 1959, ASME J. Appl. Mech., 26, pp. 651–660)
J. Appl. Mech. June 1960, 27(2): 366–367.
doi: https://doi.org/10.1115/1.3643983
Topics:
Plates (structures)
,
Stress
,
Transient analysis
,
Waves
Closure to “Discussion of ‘Transient Analysis of Stress-Wave Penetration in Plates’” (1960, ASME J. Appl. Mech., 27, pp. 366–367)
J. Appl. Mech. June 1960, 27(2): 367.
doi: https://doi.org/10.1115/1.3643984
Topics:
Stress
,
Transient analysis
,
Waves
Discussion: “The Drag on Spheres and Cylinders in a Stream of Dust-Laden Air” (Gillespie, Thomas, and Gunter, A. W., 1959, ASME J. Appl. Mech., 26, pp. 584–586)
J. Appl. Mech. June 1960, 27(2): 367–368.
doi: https://doi.org/10.1115/1.3643985
Topics:
Cylinders
,
Drag (Fluid dynamics)
,
Dust
Closure to “Discussion of ‘The Drag on Spheres and Cylinders in a Stream of Dust-Laden Air’” (1960, ASME J. Appl. Mech., 27, pp. 367–368)
J. Appl. Mech. June 1960, 27(2): 368–369.
doi: https://doi.org/10.1115/1.3643986
Topics:
Cylinders
,
Drag (Fluid dynamics)
,
Dust
Discussion: “A Photoelastic Approach to Transient Stress Problems Employing Low-Modulus Materials” (Dally, J. W., Riley, W. F., and Durelli, A. J., 1959, ASME J. Appl. Mech., 26, pp. 613–620)
J. Appl. Mech. June 1960, 27(2): 369.
doi: https://doi.org/10.1115/1.3643987
Topics:
Stress
,
Transients (Dynamics)
Closure to “Discussion of ‘A Photoelastic Approach to Transient Stress Problems Employing Low-Modulus Materials’” (1960, ASME J. Appl. Mech., 27, p. 369)
J. Appl. Mech. June 1960, 27(2): 369–370.
doi: https://doi.org/10.1115/1.3643988
Topics:
Stress
,
Transients (Dynamics)
Discussion: “Response of a Nonlinear String to Random Loading” (Caughey, T. K., 1959, ASME J. Appl. Mech., 26, pp. 341–344)
J. Appl. Mech. June 1960, 27(2): 370.
doi: https://doi.org/10.1115/1.3643989
Topics:
String
Closure to “Discussion of ‘Response of a Nonlinear String to Random Loading’” (1960, ASME J. Appl. Mech., 27, p. 370)
J. Appl. Mech. June 1960, 27(2): 370–371.
doi: https://doi.org/10.1115/1.3643990
Topics:
String
Discussion: “Nonlinear Creep Deformations of Columns of Rectangular Cross Section” (Bleich, H. H., and Dillon, Jr., O. W., 1959, ASME J. Appl. Mech., 26, pp. 517–525)
J. Appl. Mech. June 1960, 27(2): 371–372.
doi: https://doi.org/10.1115/1.3643992
Topics:
Creep
,
Deformation
Discussion: “Analysis of Plane Stress in Polar Coordinates and With Varying Thickness” (Conway, H. D., 1959, ASME J. Appl. Mech., 26, pp. 437–439)
J. Appl. Mech. June 1960, 27(2): 372.
doi: https://doi.org/10.1115/1.3643993
Topics:
Stress
Closure to “Discussion of ‘Direct Determination of Stresses in Plane Elasticity Problems Based on the Properties of Isostatics’” (1960, ASME J. Appl. Mech., 27, p. 372)
J. Appl. Mech. June 1960, 27(2): 372–373.
doi: https://doi.org/10.1115/1.3643995
Topics:
Elasticity
,
Stress
Discussion: “Velocity and Temperature Fluctuation Measurements in a Turbulent Boundary Layer Downstream of a Stepwise Discontinuity in Wall Temperature” (Johnson, D. S., 1959, ASME J. Appl. Mech., 26, pp. 325–336)
J. Appl. Mech. June 1960, 27(2): 373–374.
doi: https://doi.org/10.1115/1.3643996
Topics:
Boundary layer turbulence
,
Temperature
,
Wall temperature
Discussion: “A New Theory of Elastic Sandwich Plates—One-Dimensional Case” (Yu, Yi-Yuan, 1959, ASME J. Appl. Mech., 26, pp. 415–421)
J. Appl. Mech. June 1960, 27(2): 374–375.
doi: https://doi.org/10.1115/1.3643999
Topics:
Plates (structures)
Closure to “Discussion of ‘A New Theory of Elastic Sandwich Plates—One-Dimensional Case’” (1960, ASME J. Appl. Mech., 27, pp. 374–375)
J. Appl. Mech. June 1960, 27(2): 375.
doi: https://doi.org/10.1115/1.3644000
Topics:
Plates (structures)
Discussion: “Thermal Stress Owing to a Hot Spot in a Rectangular Strip” (Nelson, C. W., 1959, ASME J. Appl. Mech., 26, pp. 488–490)
J. Appl. Mech. June 1960, 27(2): 375–376.
doi: https://doi.org/10.1115/1.3644001
Topics:
Strips
,
Thermal stresses
Closure to “Discussion of ‘Thermal Stress Owing to a Hot Spot in a Rectangular Strip’” (1960, ASME J. Appl. Mech., 27, pp. 375–376)
J. Appl. Mech. June 1960, 27(2): 376.
doi: https://doi.org/10.1115/1.3644002
Topics:
Thermal stresses
Discussion: “Symmetric Vortex Separation on Circular Cylinders and Cones” (Bryson, A. E., 1959, ASME J. Appl. Mech., 26, pp. 643–648)
J. Appl. Mech. June 1960, 27(2): 376.
doi: https://doi.org/10.1115/1.3644003
Topics:
Circular cylinders
,
Separation (Technology)
,
Vortices
Book Reviews
Compact Heat Exchangers
J. Appl. Mech. June 1960, 27(2): 377.
doi: https://doi.org/10.1115/1.3644004
Topics:
Heat exchangers
Hyperstatic Structures, Vol. 1
J. Appl. Mech. June 1960, 27(2): 377.
doi: https://doi.org/10.1115/1.3644005
Mechanism and Motion
J. Appl. Mech. June 1960, 27(2): 377–378.
doi: https://doi.org/10.1115/1.3644006
Hypersonic Flow Theory and Hypersonic Aerodynamics
Wallace D. Hayes, Author, Ronald F. Probstein, Author, Robert Wesley Truitt, Author, Milton Van Dyke, Reviewer
J. Appl. Mech. June 1960, 27(2): 378.
doi: https://doi.org/10.1115/1.3644007
Topics:
Aerodynamics
,
Hypersonic flow
Plastic Analysis of Structures
J. Appl. Mech. June 1960, 27(2): 378–379.
doi: https://doi.org/10.1115/1.3644008
Praktische Spannungsoptik
J. Appl. Mech. June 1960, 27(2): 379.
doi: https://doi.org/10.1115/1.3644009
Statistical Physics
J. Appl. Mech. June 1960, 27(2): 379.
doi: https://doi.org/10.1115/1.3644010
Topics:
Statistical mechanics
Turbulent Flows and Heat Transfer, High Speed Aerodynamics and Jet Propulsion, Vol. V
J. Appl. Mech. June 1960, 27(2): 379–380.
doi: https://doi.org/10.1115/1.3644011
Topics:
Aerodynamics
,
Heat transfer
,
Jet propulsion
,
Turbulence
Email alerts
RSS Feeds
2020 Timoshenko Medal Acceptance Lecture: Mechanics: Evergreen and Forever New
J. Appl. Mech (September 2021)
Mechanism of Crack Initiation and Propagation of Re-Entrant Auxetic Honeycombs Under Thermal Shock
J. Appl. Mech (November 2021)
Modeling Fracture in Rate-Dependent Polymer Networks: A Quasicontinuum Approach
J. Appl. Mech (November 2021)
