Skip Nav Destination
Issues
March 1957
ISSN 0021-8936
EISSN 1528-9036
Announcement
Research Papers
Velocity, Temperature, and Heat-Transfer Measurements in a Turbulent Boundary Layer Downstream of a Stepwise Discontinuity in Wall Temperature
J. Appl. Mech. March 1957, 24(1): 2–8.
doi: https://doi.org/10.1115/1.4011434
A Theoretical Analysis of the Viscous Flow in a Narrowly Spaced Radial Diffuser
J. Appl. Mech. March 1957, 24(1): 9–15.
doi: https://doi.org/10.1115/1.4011435
Topics:
Diffusers
,
Theoretical analysis
,
Viscous flow
,
Pressure
,
Turbulence
,
Disks
,
Laminar flow
,
Valves
Head Loss in Flow Through a Cyclone Dust Separator or Vortex Chamber
J. Appl. Mech. March 1957, 24(1): 16–21.
doi: https://doi.org/10.1115/1.4011436
Topics:
Dust
,
Flow (Dynamics)
,
Vortices
,
Friction
,
Exhaust systems
,
Angular momentum
The Synthesis of Four-Bar Mechanisms by the Method of Components
J. Appl. Mech. March 1957, 24(1): 22–24.
doi: https://doi.org/10.1115/1.4011437
Topics:
Engineers
A New Method to Measure Prandtl Number and Thermal Conductivity of Fluids
J. Appl. Mech. March 1957, 24(1): 25–28.
doi: https://doi.org/10.1115/1.4011438
Topics:
Fluids
,
Prandtl number
,
Thermal conductivity
,
Atmospheric pressure
,
Boundary layers
,
Flow (Dynamics)
,
Temperature
The State Principle—Some General Aspects of the Relationships Among the Properties of Systems
J. Appl. Mech. March 1957, 24(1): 29–34.
doi: https://doi.org/10.1115/1.4011439
Topics:
Second law of thermodynamics
,
Thermodynamics
Structural Damping of a Simple Built-Up Beam With Riveted Joints in Bending
J. Appl. Mech. March 1957, 24(1): 35–38.
doi: https://doi.org/10.1115/1.4011440
Topics:
Damping
,
Rivets
,
Cycles
,
Energy dissipation
,
Screws
,
Spar platforms
,
Stiffness
,
Stress
,
Wing spars
Vibration Modes of Stators of Induction Motors
J. Appl. Mech. March 1957, 24(1): 39–45.
doi: https://doi.org/10.1115/1.4011441
Topics:
Electromagnetic induction
,
Motors
,
Stators
,
Vibration
,
Design
,
Machinery
,
Rotors
,
Shells
,
Sound waves
,
Waves
Response of Beams and Plates to Random Loads
J. Appl. Mech. March 1957, 24(1): 46–52.
doi: https://doi.org/10.1115/1.4011442
Topics:
Plates (structures)
,
Stress
,
Cantilevers
,
External pressure
Dependence of the Frequency Spectrum of a Circular Disk on Poisson’s Ratio
J. Appl. Mech. March 1957, 24(1): 53–54.
doi: https://doi.org/10.1115/1.4011443
Topics:
Disks
,
Poisson ratio
,
Computation
,
Vibration
Forced Vibration of a Body on an Elastic Stratum
J. Appl. Mech. March 1957, 24(1): 55–58.
doi: https://doi.org/10.1115/1.4011444
Longitudinal Impact of a Semi-Infinite Circular Elastic Bar
J. Appl. Mech. March 1957, 24(1): 59–64.
doi: https://doi.org/10.1115/1.4011445
Topics:
Approximation
,
Elasticity
,
Equations of motion
,
Oscillations
,
Waves
Some New Data on High-Speed Impact Phenomena
J. Appl. Mech. March 1957, 24(1): 65–68.
doi: https://doi.org/10.1115/1.4011446
Topics:
Alloys
,
Aluminum
,
Brass (Metal)
,
Density
,
Dimensions
,
Lithium
,
Magnesium (Metal)
,
Metals
,
Projectiles
,
Steel
Experiments for the Determination of Transient Stress and Strain Distributions in Two-Dimensional Problems
J. Appl. Mech. March 1957, 24(1): 69–76.
doi: https://doi.org/10.1115/1.4011447
Topics:
Stress
,
Transients (Dynamics)
,
Elastic moduli
,
Diffraction patterns
,
Wave propagation
,
Deflection
,
Disks
,
Epoxy resins
,
Photography
,
Simply supported beams
A Theoretical Criterion for the Fracture of Metals Under Combined Alternating Stresses
J. Appl. Mech. March 1957, 24(1): 77–80.
doi: https://doi.org/10.1115/1.4011448
Topics:
Fracture (Materials)
,
Fracture (Process)
,
Metals
,
Stress
,
Dislocations
,
Stress concentration
A New Method for the Construction of Hencky-Prandtl Nets
J. Appl. Mech. March 1957, 24(1): 81–84.
doi: https://doi.org/10.1115/1.4011449
Topics:
Construction
,
Theorems (Mathematics)
Yield Loads of Slabs With Reinforced Cutouts
J. Appl. Mech. March 1957, 24(1): 85–92.
doi: https://doi.org/10.1115/1.4011450
Topics:
Slabs
,
Stress
,
Clamps (Tools)
A Simple Procedure for Improved Accuracy in the Resistor-Network Solution of Laplace’s and Poisson’s Equation
J. Appl. Mech. March 1957, 24(1): 93–97.
doi: https://doi.org/10.1115/1.4011451
Topics:
Poisson equation
,
Resistors
,
Elasticity
,
Errors
,
Flow (Dynamics)
,
Incompressible fluids
,
Steady state
,
Temperature
,
Torsion
Stresses and Displacements in an Elastic-Plastic Wedge
J. Appl. Mech. March 1957, 24(1): 98–104.
doi: https://doi.org/10.1115/1.4011452
Topics:
Stress
,
Wedges
,
Plane strain
,
Pressure
,
Stress-strain relations
Beams of Uniform Strength Subjected to Uniformly Distributed Loading
J. Appl. Mech. March 1957, 24(1): 105–108.
doi: https://doi.org/10.1115/1.4011453
Topics:
Cantilevers
,
Cross section (Physics)
,
Deflection
,
Shapes
,
Stress
,
Weight (Mass)
On the Stress Distribution at the Base of a Stationary Crack
J. Appl. Mech. March 1957, 24(1): 109–114.
doi: https://doi.org/10.1115/1.4011454
The Effect of a Circular Hole on the Pure Twist of an Infinite Strip
J. Appl. Mech. March 1957, 24(1): 115–121.
doi: https://doi.org/10.1115/1.4011455
Topics:
Strips
,
Approximation
,
Deflection
,
Plates (structures)
,
Poisson ratio
,
Stress
A Mixed Boundary-Value Problem of Elasticity With Parabolic Boundary
J. Appl. Mech. March 1957, 24(1): 122–124.
doi: https://doi.org/10.1115/1.4011456
Topics:
Boundary-value problems
,
Elasticity
,
Stress concentration
Buckling of Initially Imperfect Cylindrical Shells Subject to Torsion
J. Appl. Mech. March 1957, 24(1): 125–130.
doi: https://doi.org/10.1115/1.4011457
Topics:
Buckling
,
Pipes
,
Torsion
,
Shells
,
Boundary-value problems
,
Deflection
,
Deformation
,
Potential energy
,
Stress
Min-Max Solutions for the Linear Mass-Spring System
J. Appl. Mech. March 1957, 24(1): 131–136.
doi: https://doi.org/10.1115/1.4011458
Topics:
Springs
,
Impulse (Physics)
,
Displacement
,
Stress
Design Data and Methods
Ideal Reducers and Nozzle Flares
J. Appl. Mech. March 1957, 24(1): 137–140.
doi: https://doi.org/10.1115/1.4011459
Axisymmetrical Bending of Circular Plates Under Simultaneous Action of Lateral Load, Force in the Middle Plane, and Elastic Foundation
J. Appl. Mech. March 1957, 24(1): 141–143.
doi: https://doi.org/10.1115/1.4011460
Topics:
Deflection
,
Heat exchangers
,
Plates (structures)
,
Rotation
,
Stress
,
Stress analysis (Engineering)
Design Charts for Symmetrical Ring Girders
J. Appl. Mech. March 1957, 24(1): 144–147.
doi: https://doi.org/10.1115/1.4011461
Topics:
Design
,
Girders
,
Symmetry (Physics)
,
Shapes
Technical Briefs
Compressibility of a Sphere Pack—Comparison of Theory and Experiment
J. Appl. Mech. March 1957, 24(1): 148–149.
doi: https://doi.org/10.1115/1.4011462
Topics:
Compressibility
Nonuniform Rim-Stress Conditions for a Rotating Solid of Uniform Stress
J. Appl. Mech. March 1957, 24(1): 149–150.
doi: https://doi.org/10.1115/1.4011463
Topics:
Stress
Note on Way’s Large-Deflection Solution for the Uniformly Loaded and Clamped Circular Plate
J. Appl. Mech. March 1957, 24(1): 151–152.
doi: https://doi.org/10.1115/1.4011464
Topics:
Deflection
Discussions and Closures
Discussion: “Stiffness of Curved Circular Tubes With Internal Pressure” (Kafka, P. G., and Dunn, M. B., 1956, ASME J. Appl. Mech., 23, pp. 247–254)
J. Appl. Mech. March 1957, 24(1): 153–154.
doi: https://doi.org/10.1115/1.4011466
Closure to “Discussion of ‘Stiffness of Curved Circular Tubes With Internal Pressure’” (1957, ASME J. Appl. Mech., 24, pp. 153–154)
J. Appl. Mech. March 1957, 24(1): 154–155.
doi: https://doi.org/10.1115/1.4011467
Topics:
Stiffness
Discussion: “Analysis of Creep in Rotating Disks Based on the Tresca Criterion and Associated Flow Rule” (Wahl, A. M., 1956, ASME J. Appl. Mech., 23, pp. 231–238)
J. Appl. Mech. March 1957, 24(1): 155.
doi: https://doi.org/10.1115/1.4011468
Topics:
Creep
,
Flow (Dynamics)
,
Rotating disks
Closure to “Discussion of ‘Analysis of Creep in Rotating Disks Based on the Tresca Criterion and Associated Flow Rule’” (1957, ASME J. Appl. Mech., 24, p. 155)
J. Appl. Mech. March 1957, 24(1): 155.
doi: https://doi.org/10.1115/1.4011469
Topics:
Creep
,
Flow (Dynamics)
,
Rotating disks
Discussion: “Theory of Yield Point and Transition Temperature of Mild Steel” (Forscher, F., 1956, ASME J. Appl. Mech., 23, pp. 219–224)
J. Appl. Mech. March 1957, 24(1): 155–156.
doi: https://doi.org/10.1115/1.4011470
Topics:
Phase transition temperature
,
Steel
,
Yield point
Closure to “Discussion of ‘Theory of Yield Point and Transition Temperature of Mild Steel’” (1957, ASME J. Appl. Mech., 24, pp. 155–156)
J. Appl. Mech. March 1957, 24(1): 156.
doi: https://doi.org/10.1115/1.4011471
Topics:
Phase transition temperature
,
Yield point
Discussion: “A Suction Device Using Air Under Pressure” (Welanetz, L. F., 1956, ASME J. Appl. Mech., 23, pp. 269–272)
J. Appl. Mech. March 1957, 24(1): 156–158.
doi: https://doi.org/10.1115/1.4011472
Closure to “Discussion of ‘A Suction Device Using Air Under Pressure’” (1957, ASME J. Appl. Mech., 24, pp. 156–158)
J. Appl. Mech. March 1957, 24(1): 158.
doi: https://doi.org/10.1115/1.4011473
Topics:
Suction
Discussion: “Some Dynamic Properties of Oil-Film Journal Bearings With Reference to the Unbalance Vibration of Rotors” (Hagg, A. C., and Sankey, G. O., 1956, ASME J. Appl. Mech., 23, pp. 302–306)
J. Appl. Mech. March 1957, 24(1): 158.
doi: https://doi.org/10.1115/1.4011474
Topics:
Journal bearings
,
Rotors
,
Vibration
Discussion: “Some Dynamic Properties of Oil-Film Journal Bearings With Reference to the Unbalance Vibration of Rotors” (Hagg, A. C., and Sankey, G. O., 1956, ASME J. Appl. Mech., 23, pp. 302–306)
J. Appl. Mech. March 1957, 24(1): 158–159.
doi: https://doi.org/10.1115/1.4011475
Topics:
Journal bearings
,
Rotors
,
Vibration
Discussion: “An Improved Nomogram for the Ratios of the Octahedral to the Maximum Shearing Stresses” (Kharbanda, O. P., 1956, ASME J. Appl. Mech., 23, p. 312)
J. Appl. Mech. March 1957, 24(1): 160.
doi: https://doi.org/10.1115/1.4011477
Topics:
Shear stress
Discussion: “The Propagation of Fatigue Cracks” (Head, A. K., 1956, ASME J. Appl. Mech., 23, pp. 407–410)
J. Appl. Mech. March 1957, 24(1): 160–161.
doi: https://doi.org/10.1115/1.4011478
Topics:
Fatigue cracks
Discussion: “The Propagation of Fatigue Cracks” (Head, A. K., 1956, ASME J. Appl. Mech., 23, pp. 407–410)
J. Appl. Mech. March 1957, 24(1): 161.
doi: https://doi.org/10.1115/1.4011479
Topics:
Fatigue cracks
Closure to “Discussions of ‘The Propagation of Fatigue Cracks’” (1957, ASME J. Appl. Mech., 24, pp. 160–161)
J. Appl. Mech. March 1957, 24(1): 161.
doi: https://doi.org/10.1115/1.4011480
Topics:
Fatigue
Discussion: “Vibrations of Cylindrical Shells With Rotatory Inertia and Shear” (Lin, T. C., and Morgan, G. W., 1956, ASME J. Appl. Mech., 23, pp. 255–261)
J. Appl. Mech. March 1957, 24(1): 162.
doi: https://doi.org/10.1115/1.4011481
Topics:
Inertia (Mechanics)
,
Pipes
,
Shear (Mechanics)
,
Vibration
Closure to “Discussion of ‘Vibrations of Cylindrical Shells With Rotatory Inertia and Shear’” (1957, ASME J. Appl. Mech., 24, p. 162)
J. Appl. Mech. March 1957, 24(1): 162.
doi: https://doi.org/10.1115/1.4011482
Topics:
Inertia (Mechanics)
,
Pipes
,
Vibration
Discussion: “An Elastoplastic Thermal-Stress Analysis of a Free-Plate” (Weiner, Jerome, 1956, ASME J. Appl. Mech., 23, pp. 395–402)
J. Appl. Mech. March 1957, 24(1): 162.
doi: https://doi.org/10.1115/1.4011483
Topics:
Thermal stresses
Closure to “Discussion of ‘An Elastoplastic Thermal-Stress Analysis of a Free-Plate’” (1957, ASME J. Appl. Mech., 24, p. 162)
J. Appl. Mech. March 1957, 24(1): 162.
doi: https://doi.org/10.1115/1.4011484
Topics:
Thermal stresses
Discussion: “Pretwisted Beams and Columns” (Zickel, John, 1956, ASME J. Appl. Mech., 23, pp. 165–175)
J. Appl. Mech. March 1957, 24(1): 162.
doi: https://doi.org/10.1115/1.4011485
Closure to “Discussion of ‘Pretwisted Beams and Columns’” (1957, ASME J. Appl. Mech., 24, p. 162)
J. Appl. Mech. March 1957, 24(1): 162.
doi: https://doi.org/10.1115/1.4011486
Email alerts
RSS Feeds
Enhancement of Synchronization in Nonlinear MEMS Oscillator Based on Electrothermal Adjustment
J. Appl. Mech (April 2025)