Skip Nav Destination
Issues
June 1953
ISSN 0021-8936
EISSN 1528-9036
In this Issue
Research Papers
Stresses Due to Tangential and Normal Loads on an Elastic Solid With Application to Some Contact Stress Problems
J. Appl. Mech. June 1953, 20(2): 157–166.
doi: https://doi.org/10.1115/1.4010643
Topics:
Stress
,
Shear stress
,
Friction
,
Plane strain
,
Shear (Mechanics)
,
Tangential loading
,
Failure
,
Fatigue
,
Fracture (Materials)
,
Fracture (Process)
Forced Lateral Vibration of Beams on Damped Flexible End Supports
J. Appl. Mech. June 1953, 20(2): 167–172.
doi: https://doi.org/10.1115/1.4010644
Topics:
Vibration
,
Damping
,
Resonance
,
Steady state
Frequencies of Longitudinal Vibration for a Slender Rod of Variable Section
J. Appl. Mech. June 1953, 20(2): 173–177.
doi: https://doi.org/10.1115/1.4010645
Topics:
Vibration
An Invariant Membrane Stress Function for Shells
J. Appl. Mech. June 1953, 20(2): 178–182.
doi: https://doi.org/10.1115/1.4010646
Topics:
Membranes
,
Shells
,
Stress
,
Bending (Stress)
,
Deformation
On the Plastic Strains in Slabs With Cutouts
J. Appl. Mech. June 1953, 20(2): 183–188.
doi: https://doi.org/10.1115/1.4010647
Topics:
Slabs
,
Stress
,
Deformation
,
Approximation
,
Displacement
,
Hooke's law
,
Shear modulus
,
Shear stress
,
Tension
Response of an Elastic Cylindrical Shell to a Transverse, Step Shock Wave
J. Appl. Mech. June 1953, 20(2): 189–195.
doi: https://doi.org/10.1115/1.4010648
Topics:
Pipes
,
Shock waves
,
Acoustics
,
Shells
,
Waves
The Origin of Damping in High-Strength Ferromagnetic Alloys
J. Appl. Mech. June 1953, 20(2): 196–200.
doi: https://doi.org/10.1115/1.4010649
Topics:
Alloys
,
Damping
,
Theoretical analysis
Effect of Damping Constants and Stress Distribution on the Resonance Response of Members
J. Appl. Mech. June 1953, 20(2): 201–209.
doi: https://doi.org/10.1115/1.4010650
Topics:
Damping
,
Resonance
,
Stress concentration
,
Stress
,
Shapes
,
Vibration
,
Materials properties
,
Temperature
Unsteady Radial Flow of Gas Through Porous Media
J. Appl. Mech. June 1953, 20(2): 210–214.
doi: https://doi.org/10.1115/1.4010651
Topics:
Porous materials
,
Radial flow
,
Pressure
,
Reservoirs
,
Flow (Dynamics)
,
Computation
,
Disks
,
Gases
,
Machinery
,
Natural gas
Pure Bending of an Incomplete Torus
J. Appl. Mech. June 1953, 20(2): 215–226.
doi: https://doi.org/10.1115/1.4010652
Topics:
Cross section (Physics)
,
Elasticity
,
Shapes
,
Stress
,
Wedges
Deflections of Circular Beams Resting on Elastic Foundations Obtained by Methods of Harmonic Analysis
J. Appl. Mech. June 1953, 20(2): 227–232.
doi: https://doi.org/10.1115/1.4010653
Topics:
Deflection
,
Stress
,
Fourier series
On the Application of the Impedance Method to Continuous Systems
J. Appl. Mech. June 1953, 20(2): 233–236.
doi: https://doi.org/10.1115/1.4010654
Topics:
Oscillations
,
Vibration
,
Wave equations
On an Iterative Method for Nonlinear Vibrations
J. Appl. Mech. June 1953, 20(2): 237–240.
doi: https://doi.org/10.1115/1.4010655
Topics:
Iterative methods
,
Vibration
,
Boundary-value problems
,
Degrees of freedom
Natural Frequencies of Twisted Cantilever Beams
J. Appl. Mech. June 1953, 20(2): 241–244.
doi: https://doi.org/10.1115/1.4010656
Topics:
Cantilever beams
,
Aircraft
,
Blades
,
Compressors
,
Propellers
,
Turbines
,
Vibration
An Analytical Theory of the Creep Deformation of Materials
J. Appl. Mech. June 1953, 20(2): 245–252.
doi: https://doi.org/10.1115/1.4010657
Topics:
Creep
,
Design
,
High temperature
,
Military systems
,
Stress
,
Transients (Dynamics)
Influence of Viscous Effects on Impact Tubes
J. Appl. Mech. June 1953, 20(2): 253–256.
doi: https://doi.org/10.1115/1.4010658
Topics:
Flow (Dynamics)
,
Fluid density
,
Fluids
,
Kinematics
,
Pressure
,
Reynolds number
,
Viscosity
Axisymmetric Flexural Temperature Stresses in Circular Plates
J. Appl. Mech. June 1953, 20(2): 257–260.
doi: https://doi.org/10.1115/1.4010659
Topics:
Plates (structures)
,
Stress
,
Temperature
,
Vessels
,
Design
,
Heat
,
Heating
,
Temperature distribution
Transient Thermal Stresses in Slabs and Circular Pressure Vessels
J. Appl. Mech. June 1953, 20(2): 261–269.
doi: https://doi.org/10.1115/1.4010660
Topics:
Pressure vessels
,
Slabs
,
Thermal stresses
,
Transients (Dynamics)
,
Stress
,
Thermal shock
,
Computation
,
Cooling
,
Heating
,
Temperature
The Shearing of a Rectangular Block Between Rough Plates
J. Appl. Mech. June 1953, 20(2): 270–272.
doi: https://doi.org/10.1115/1.4010661
The Torsion of Spiral Rods
J. Appl. Mech. June 1953, 20(2): 273–278.
doi: https://doi.org/10.1115/1.4010662
Topics:
Approximation
,
Equilibrium (Physics)
,
Rods
,
Springs
,
Stress
,
Torsion
Reinforced Circular Holes in Bending With Shear
J. Appl. Mech. June 1953, 20(2): 279–285.
doi: https://doi.org/10.1115/1.4010663
Topics:
Shear (Mechanics)
,
Stress concentration
,
Shapes
Some New Types of Orthotropic Plates Laminated of Orthotropic Material
J. Appl. Mech. June 1953, 20(2): 286–288.
doi: https://doi.org/10.1115/1.4010664
Topics:
Plates (structures)
,
Plywood
,
Deflection
,
Stress
High-Temperature Compression Testing of Graphite
J. Appl. Mech. June 1953, 20(2): 289–294.
doi: https://doi.org/10.1115/1.4010665
Topics:
Compression
,
Graphite
,
High temperature
,
Testing
,
Temperature
,
Compressive strength
,
Cylinders
,
Deformation
,
Failure
,
Plasticity
Discussions and Closures
Discussion: “A Matrix Method for Flexibility Analysis of Piping Systems” (Brock, J. E., 1952, ASME J. Appl. Mech., 19, pp. 501–516)
J. Appl. Mech. June 1953, 20(2): 295–296.
doi: https://doi.org/10.1115/1.4010666
Topics:
Piping systems
Discussion: “A Matrix Method for Flexibility Analysis of Piping Systems” (Brock, J. E., 1952, ASME J. Appl. Mech., 19, pp. 501–516)
J. Appl. Mech. June 1953, 20(2): 296.
doi: https://doi.org/10.1115/1.4010667
Topics:
Piping systems
Closure to “Discussions of ‘A Matrix Method for Flexibility Analysis of Piping Systems’” (1953, ASME J. Appl. Mech., 20, pp. 295–296)
J. Appl. Mech. June 1953, 20(2): 296–298.
doi: https://doi.org/10.1115/1.4010668
Topics:
Pipes
Discussion: “Thin Rectangular Plates on Elastic Foundations” (Fletcher, H. J., and Thorne, C. J., 1952, ASME J. Appl. Mech., 19, pp. 361–368)
J. Appl. Mech. June 1953, 20(2): 298–299.
doi: https://doi.org/10.1115/1.4010669
Topics:
Plates (structures)
Closure to “Discussion of ‘Thin Rectangular Plates on Elastic Foundations’” (1953, ASME J. Appl. Mech., 20, pp. 298–299)
J. Appl. Mech. June 1953, 20(2): 299–301.
doi: https://doi.org/10.1115/1.4010670
Topics:
Plates (structures)
Discussion: “A Study of Vanes Singing in Water” (Gongwer, C. A., 1952, ASME J. Appl. Mech., 19, pp. 432–438)
J. Appl. Mech. June 1953, 20(2): 301.
doi: https://doi.org/10.1115/1.4010671
Topics:
Water
Closure to “Discussion of ‘A Study of Vanes Singing in Water’” (1953, ASME J. Appl. Mech., 20, p. 301)
J. Appl. Mech. June 1953, 20(2): 301.
doi: https://doi.org/10.1115/1.4010672
Discussion: “On a General Method of Solving Second-Order Differential Equations by Phase-Plane Displacements” (Jacobsen, L. S., 1952, ASME J. Appl. Mech., 19, pp. 543–553)
J. Appl. Mech. June 1953, 20(2): 301–303.
doi: https://doi.org/10.1115/1.4010673
Topics:
Differential equations
Discussion: “The Elastic Sphere Under Concentrated Loads” (Sternberg, E., and Rosenthal, F., 1952, ASME J. Appl. Mech., 19, pp. 413–421)
J. Appl. Mech. June 1953, 20(2): 304–305.
doi: https://doi.org/10.1115/1.4010677
Topics:
Stress
Discussion: “The Elastic Sphere Under Concentrated Loads” (Sternberg, E., and Rosenthal, F., 1952, ASME J. Appl. Mech., 19, pp. 413–421)
J. Appl. Mech. June 1953, 20(2): 305–306.
doi: https://doi.org/10.1115/1.4010678
Topics:
Stress
Discussion: “The Elastic Sphere Under Concentrated Loads” (Sternberg, E., and Rosenthal, F., 1952, ASME J. Appl. Mech., 19, pp. 413–421)
J. Appl. Mech. June 1953, 20(2): 306.
doi: https://doi.org/10.1115/1.4010679
Topics:
Stress
Closure to “Discussions of ‘The Elastic Sphere Under Concentrated Loads’” (1953, ASME J. Appl. Mech., 20, pp. 304–306)
J. Appl. Mech. June 1953, 20(2): 306–307.
doi: https://doi.org/10.1115/1.4010680
Discussion: “On Longitudinal Plane Waves of Elastic-Plastic Strain in Solids” (Wood, D. S., 1952, ASME J. Appl. Mech., 19, pp. 521–525)
J. Appl. Mech. June 1953, 20(2): 307.
doi: https://doi.org/10.1115/1.4010681
Topics:
Solids
,
Waves
,
Wood products
Discussion: “On Longitudinal Plane Waves of Elastic-Plastic Strain in Solids” (Wood, D. S., 1952, ASME J. Appl. Mech., 19, pp. 521–525)
J. Appl. Mech. June 1953, 20(2): 307–308.
doi: https://doi.org/10.1115/1.4010682
Topics:
Solids
,
Waves
,
Wood products
Closure to “Discussions of ‘On Longitudinal Plane Waves of Elastic-Plastic Strain in Solids’” (1953, ASME J. Appl. Mech., 20, pp. 307–308)
J. Appl. Mech. June 1953, 20(2): 308.
doi: https://doi.org/10.1115/1.4010683
Topics:
Waves
Discussion: “A Simple Method of Determining Plastic Stresses and Strains in Rotating Disks With Nonuniform Metal Properties” (Wu, M. H. L., 1952, ASME J. Appl. Mech., 19, pp. 489–495)
J. Appl. Mech. June 1953, 20(2): 308–309.
doi: https://doi.org/10.1115/1.4010684
Topics:
Metals
,
Rotating disks
,
Stress
Discussion: “A Simple Method of Determining Plastic Stresses and Strains in Rotating Disks With Nonuniform Metal Properties” (Wu, M. H. L., 1952, ASME J. Appl. Mech., 19, pp. 489–495)
J. Appl. Mech. June 1953, 20(2): 309.
doi: https://doi.org/10.1115/1.4010685
Topics:
Metals
,
Rotating disks
,
Stress
Closure to “Discussions of ‘A Simple Method of Determining Plastic Stresses and Strains in Rotating Disks With Nonuniform Metal Properties’” (1953, ASME J. Appl. Mech., 20, pp. 308–309)
J. Appl. Mech. June 1953, 20(2): 309.
doi: https://doi.org/10.1115/1.4010686
Topics:
Metals
,
Rotating disks
,
Stress
Discussion: “Free Vibrations of Constrained Beams” (Lee, W. F. Z., and Saibel, Edward, 1952, ASME J. Appl. Mech., 19, pp. 471–477)
J. Appl. Mech. June 1953, 20(2): 310.
doi: https://doi.org/10.1115/1.4010687
Topics:
Free vibrations
Closure to “Discussion of ‘Free Vibrations of Constrained Beams’” (1953, ASME J. Appl. Mech., 20, p. 310)
J. Appl. Mech. June 1953, 20(2): 310.
doi: https://doi.org/10.1115/1.4010688
Topics:
Free vibrations
Discussion: “Deflection and Stresses in Beams Subjected to Bending and Creep” (Pao, Yoh-Han, and Marin, Joseph, 1952, ASME J. Appl. Mech., 19, pp. 478–484)
J. Appl. Mech. June 1953, 20(2): 310.
doi: https://doi.org/10.1115/1.4010689
Topics:
Creep
,
Deflection
,
Stress
Closure to “Discussion of ‘Deflection and Stresses in Beams Subjected to Bending and Creep’” (1953, ASME J. Appl. Mech., 20, p. 310)
J. Appl. Mech. June 1953, 20(2): 310.
doi: https://doi.org/10.1115/1.4010690
Topics:
Deflection
,
Stress
Discussion: “Investigation of Annular Liquid Flow With Concurrent Air Flow in Horizontal Tubes” (Abramson, A. E., 1952, ASME J. Appl. Mech., 19, pp. 267–274)
J. Appl. Mech. June 1953, 20(2): 311.
doi: https://doi.org/10.1115/1.4010691
Topics:
Air flow
,
Flow (Dynamics)
Email alerts
RSS Feeds
Manipulation for Asymmetric Wave Reflection in Space–Time Modulated Media With Exceptional Points
J. Appl. Mech (July 2025)
