Skip Nav Destination
Issues
June 1952
ISSN 0021-8936
EISSN 1528-9036
Research Papers
Partially Plastic Thick-Walled Cylinder Theory
J. Appl. Mech. June 1952, 19(2): 133–140.
doi: https://doi.org/10.1115/1.4010436
Topics:
Cylinders
,
Failure
,
Stress
,
Compressibility
,
Deflection
,
Pressure
,
Stress-strain relations
,
Work hardening
On the Stresses in a Notched Strip
J. Appl. Mech. June 1952, 19(2): 141–146.
doi: https://doi.org/10.1115/1.4010437
An Alternative Formulation of the Laws of Mechanics
J. Appl. Mech. June 1952, 19(2): 147–150.
doi: https://doi.org/10.1115/1.4010438
A Variational Principle for the Mesh-Type Analysis of a Mechanical System
J. Appl. Mech. June 1952, 19(2): 151–152.
doi: https://doi.org/10.1115/1.4010439
Topics:
Variational principles
,
Dynamic systems
,
Equations of motion
The Limit Design of a Transversely Loaded Square Grid
J. Appl. Mech. June 1952, 19(2): 153–158.
doi: https://doi.org/10.1115/1.4010440
Heat-Exchanger Tube-Sheet Design—2: Fixed Tube Sheets
J. Appl. Mech. June 1952, 19(2): 159–166.
doi: https://doi.org/10.1115/1.4010441
Topics:
Design
,
Heat exchangers
,
Pressure
,
Hydrostatic pressure
,
Shells
,
Thermal expansion
Bending and Buckling of an Elastically Restrained Circular Plate
J. Appl. Mech. June 1952, 19(2): 167–172.
doi: https://doi.org/10.1115/1.4010442
Topics:
Buckling
,
Deflection
,
Plates (structures)
,
Stress
Gas Cooling of a Porous Heat Source
J. Appl. Mech. June 1952, 19(2): 173–178.
doi: https://doi.org/10.1115/1.4010443
Topics:
Gas air conditioning
,
Heat
,
Pressure drop
,
Flow (Dynamics)
,
Temperature profiles
,
Cooling
,
Ducts
,
Fluids
,
Graphite
,
Heat transfer
The Marcus Method Applied to Solution of Uniformly Loaded and Clamped Rectangular Plate Subjected to Forces in Its Plane
J. Appl. Mech. June 1952, 19(2): 179–184.
doi: https://doi.org/10.1115/1.4010444
Topics:
Deflection
,
Stress
Measurement of Recovery Factors and Friction Coefficients for Supersonic Flow of Air in a Tube: 2—Results Based on a Two-Dimensional Flow Model for Entrance Region
J. Appl. Mech. June 1952, 19(2): 185–194.
doi: https://doi.org/10.1115/1.4010445
Topics:
Entrance region
,
Flow (Dynamics)
,
Friction
,
Supersonic flow
,
Boundary layers
,
Boundary layer turbulence
,
Flat plates
,
Fluids
,
Heat transfer
,
Mach number
Lateral Vibrations as Related to Structural Stability
J. Appl. Mech. June 1952, 19(2): 195–204.
doi: https://doi.org/10.1115/1.4010446
Topics:
Structural stability
,
Vibration
,
Stress
,
Buckling
,
Flat plates
,
Free vibrations
,
Stability
,
Thrust
,
Vibration tests
Bending Vibrations of a Pipe Line Containing Flowing Fluid
J. Appl. Mech. June 1952, 19(2): 205–208.
doi: https://doi.org/10.1115/1.4010447
Topics:
Fluid dynamics
,
Pipelines
,
Vibration
,
Fluids
,
Free vibrations
,
Damping
,
Design
,
Euler-Bernoulli beam theory
,
Shapes
,
Steady state
Heat Conduction in a Compressible Fluid
J. Appl. Mech. June 1952, 19(2): 209–213.
doi: https://doi.org/10.1115/1.4010448
Topics:
Fluids
,
Heat conduction
,
Heat
,
Pressure
,
Waves
,
Compressibility
,
Sound waves
Design Data and Methods
The Computation of Flexural–Torsional Buckling Loads
J. Appl. Mech. June 1952, 19(2): 214–219.
doi: https://doi.org/10.1115/1.4010449
Topics:
Buckling
,
Computation
,
Stress
,
Errors
Torsional Vibration Modes of Tapered Bars
J. Appl. Mech. June 1952, 19(2): 220–222.
doi: https://doi.org/10.1115/1.4010450
Topics:
Vibration
,
Differential equations
Analysis of Elastic Two and Three-Section Short Columns
J. Appl. Mech. June 1952, 19(2): 223–226.
doi: https://doi.org/10.1115/1.4010451
Topics:
Deformation
,
Fibers
,
Relaxation (Physics)
,
Shapes
,
Stress
Technical Briefs
Bending of Orthotropic Beams
J. Appl. Mech. June 1952, 19(2): 227.
doi: https://doi.org/10.1115/1.4010452
Note on Energy of Bending of Plates
J. Appl. Mech. June 1952, 19(2): 228.
doi: https://doi.org/10.1115/1.4010453
Topics:
Plates (structures)
Discussions and Closures
Discussion: “Stresses in Pipe Bundles” (Poritsky, H., and Horvay, G., 1951, ASME J. Appl. Mech., 18, pp. 241–250)
J. Appl. Mech. June 1952, 19(2): 229.
doi: https://doi.org/10.1115/1.4010454
Closure to “Discussion of ‘Stresses in Pipe Bundles’” (1952, ASME J. Appl. Mech., 19, p. 229)
J. Appl. Mech. June 1952, 19(2): 229–230.
doi: https://doi.org/10.1115/1.4010455
Discussion: “On the Extrusion of a Very Viscous Liquid” (Weil, Herschel, 1951, ASME J. Appl. Mech., 18, pp. 267–272)
J. Appl. Mech. June 1952, 19(2): 230.
doi: https://doi.org/10.1115/1.4010456
Topics:
Extruding
Discussion: “Plastic-Wave Propagation Effects in High-Speed Testing” (Lee, E. H., and Wolf, H., 1951, ASME J. Appl. Mech., 18, pp. 379–386)
J. Appl. Mech. June 1952, 19(2): 230.
doi: https://doi.org/10.1115/1.4010457
Closure to “Discussion of ‘Plastic-Wave Propagation Effects in High-Speed Testing’” (1952, ASME J. Appl. Mech., 19, p. 230)
J. Appl. Mech. June 1952, 19(2): 230–231.
doi: https://doi.org/10.1115/1.4010458
Topics:
Waves
Closure to “Discussions of ‘On the Inextensional Theory of Deformation of a Right Circular Cylindrical Shell’” (1952, ASME J. Appl. Mech., 19, p. 231)
J. Appl. Mech. June 1952, 19(2): 231.
doi: https://doi.org/10.1115/1.4010461
Topics:
Deformation
Discussion: “A New Method of Calculation of Repeat Factors for Turbines and Compressors” (Kaye, Joseph, and Wadleigh, K. R., 1951, ASME J. Appl. Mech., 18, pp. 387–392)
J. Appl. Mech. June 1952, 19(2): 231.
doi: https://doi.org/10.1115/1.4010462
Topics:
Compressors
,
Turbines
Discussion: “A New Method of Calculation of Repeat Factors for Turbines and Compressors” (Kaye, Joseph, and Wadleigh, K. R., 1951, ASME J. Appl. Mech., 18, pp. 387–392)
J. Appl. Mech. June 1952, 19(2): 231–232.
doi: https://doi.org/10.1115/1.4010463
Topics:
Compressors
,
Turbines
Closure to “Discussions of ‘A New Method of Calculation of Repeat Factors for Turbines and Compressors’” (1952, ASME J. Appl. Mech., 19, pp. 231–232)
J. Appl. Mech. June 1952, 19(2): 232.
doi: https://doi.org/10.1115/1.4010464
Topics:
Turbines
Discussion: “The Safety Factor of an Elastic-Plastic Body in Plane Strain” (Drucker, D. C., Greenberg, H. J., and Prager, W., 1951, ASME J. Appl. Mech., 18, pp. 371–378)
J. Appl. Mech. June 1952, 19(2): 232.
doi: https://doi.org/10.1115/1.4010465
Topics:
Plane strain
,
Safety
Closure to “Discussion of ‘The Safety Factor of an Elastic-Plastic Body in Plane Strain’” (1952, ASME J. Appl. Mech., 19, p. 232)
J. Appl. Mech. June 1952, 19(2): 233.
doi: https://doi.org/10.1115/1.4010466
Topics:
Safety
Discussion: “A Statistical Distribution Function of Wide Applicability” (Weibull, Waloddi, 1951, ASME J. Appl. Mech., 18, pp. 293–297)
J. Appl. Mech. June 1952, 19(2): 233.
doi: https://doi.org/10.1115/1.4010467
Topics:
Statistical distributions
Discussion: “A Statistical Distribution Function of Wide Applicability” (Weibull, Waloddi, 1951, ASME J. Appl. Mech., 18, pp. 293–297)
J. Appl. Mech. June 1952, 19(2): 233.
doi: https://doi.org/10.1115/1.4010468
Topics:
Statistical distributions
Discussion: “A Statistical Distribution Function of Wide Applicability” (Weibull, Waloddi, 1951, ASME J. Appl. Mech., 18, pp. 293–297)
J. Appl. Mech. June 1952, 19(2): 233–234.
doi: https://doi.org/10.1115/1.4010469
Topics:
Statistical distributions
Closure to “Discussions of ‘A Statistical Distribution Function of Wide Applicability’” (1952, ASME J. Appl. Mech., 19, pp. 233–234)
J. Appl. Mech. June 1952, 19(2): 234.
doi: https://doi.org/10.1115/1.4010470
Topics:
Statistical distributions
Discussion: “The Theory of Plasticity Applied to a Problem of Machining” (Lee, E. H., and Shaffer, B. W., 1951, ASME J. Appl. Mech., 18, pp. 405–413)
J. Appl. Mech. June 1952, 19(2): 234–235.
doi: https://doi.org/10.1115/1.4010471
Topics:
Machining
,
Plasticity
Discussion: “The Theory of Plasticity Applied to a Problem of Machining” (Lee, E. H., and Shaffer, B. W., 1951, ASME J. Appl. Mech., 18, pp. 405–413)
J. Appl. Mech. June 1952, 19(2): 235–236.
doi: https://doi.org/10.1115/1.4010472
Topics:
Machining
,
Plasticity
Discussion: “The Theory of Plasticity Applied to a Problem of Machining” (Lee, E. H., and Shaffer, B. W., 1951, ASME J. Appl. Mech., 18, pp. 405–413)
J. Appl. Mech. June 1952, 19(2): 236–237.
doi: https://doi.org/10.1115/1.4010473
Topics:
Machining
,
Plasticity
Discussion: “The Theory of Plasticity Applied to a Problem of Machining” (Lee, E. H., and Shaffer, B. W., 1951, ASME J. Appl. Mech., 18, pp. 405–413)
J. Appl. Mech. June 1952, 19(2): 237–238.
doi: https://doi.org/10.1115/1.4010474
Topics:
Machining
,
Plasticity
Closure to “Discussions of ‘The Theory of Plasticity Applied to a Problem of Machining’” (1952, ASME J. Appl. Mech., 19, pp. 234–238)
J. Appl. Mech. June 1952, 19(2): 238–239.
doi: https://doi.org/10.1115/1.4010475
Topics:
Plasticity
Discussion: “The Calculated Performance of Dynamically Loaded Sleeve Bearings—III” (Burwell, J. T., 1951, ASME J. Appl. Mech., 18, pp. 393–404)
J. Appl. Mech. June 1952, 19(2): 239.
doi: https://doi.org/10.1115/1.4010476
Topics:
Plain bearings
Discussion: “The Calculated Performance of Dynamically Loaded Sleeve Bearings—III” (Burwell, J. T., 1951, ASME J. Appl. Mech., 18, pp. 393–404)
J. Appl. Mech. June 1952, 19(2): 239–240.
doi: https://doi.org/10.1115/1.4010477
Topics:
Plain bearings
Discussion: “The Calculated Performance of Dynamically Loaded Sleeve Bearings—III” (Burwell, J. T., 1951, ASME J. Appl. Mech., 18, pp. 393–404)
J. Appl. Mech. June 1952, 19(2): 240.
doi: https://doi.org/10.1115/1.4010478
Topics:
Plain bearings
Discussion: “The Calculated Performance of Dynamically Loaded Sleeve Bearings—III” (Burwell, J. T., 1951, ASME J. Appl. Mech., 18, pp. 393–404)
J. Appl. Mech. June 1952, 19(2): 240–241.
doi: https://doi.org/10.1115/1.4010479
Topics:
Plain bearings
Closure to “Discussions of ‘The Calculated Performance of Dynamically Loaded Sleeve Bearings—III’” (1952, ASME J. Appl. Mech., 19, pp. 239–241)
J. Appl. Mech. June 1952, 19(2): 242.
doi: https://doi.org/10.1115/1.4010480
Topics:
Plain bearings
Email alerts
RSS Feeds
Axial Compression and Buckling Analysis of Columnar Structures with Tetra-Anti-Chiral Configuration
J. Appl. Mech (August 2022)
