Skip Nav Destination
Issues
June 1951
ISSN 0021-8936
EISSN 1528-9036
In this Issue
Research Papers
Vibration of Rectangular and Skew Cantilever Plates
J. Appl. Mech. June 1951, 18(2): 129–134.
doi: https://doi.org/10.1115/1.4010265
Topics:
Cantilevers
,
Plates (structures)
,
Vibration
,
Deflection
Free Vibrations of a Pin-Ended Column With Constant Distance Between Pin Ends
J. Appl. Mech. June 1951, 18(2): 135–139.
doi: https://doi.org/10.1115/1.4010266
Topics:
Free vibrations
,
Stress
,
Vibration
,
Waves
,
Deflection
,
Differential equations
,
Shapes
Axially Symmetrical Plates With Linearly Varying Thickness
J. Appl. Mech. June 1951, 18(2): 140–142.
doi: https://doi.org/10.1115/1.4010267
Topics:
Plates (structures)
,
Symmetry (Physics)
,
Deflection
,
Poisson ratio
Large-Deflection Theory for Plates With Small Initial Curvature Loaded in Edge Compression
J. Appl. Mech. June 1951, 18(2): 143–151.
doi: https://doi.org/10.1115/1.4010268
Topics:
Compression
,
Deflection
,
Plates (structures)
,
Stress
,
Flat plates
,
Boundary-value problems
,
Buckling
,
Stress concentration
Some Thin-Plate Problems by the Sine Transform
J. Appl. Mech. June 1951, 18(2): 152–156.
doi: https://doi.org/10.1115/1.4010269
Topics:
Deflection
,
Plates (structures)
,
Stress
The Limit Design of Space Frames
J. Appl. Mech. June 1951, 18(2): 157–162.
doi: https://doi.org/10.1115/1.4010270
Topics:
Design
,
Space frame structures
,
Approximation
,
Collapse
,
Stress
Analysis of Deep Beams
J. Appl. Mech. June 1951, 18(2): 163–172.
doi: https://doi.org/10.1115/1.4010271
A Fourier Integral Solution for the Plane-Stress Problem of a Circular Ring With Concentrated Radial Loads
J. Appl. Mech. June 1951, 18(2): 173–182.
doi: https://doi.org/10.1115/1.4010272
Topics:
Stress
,
Equilibrium (Physics)
,
Fourier series
The Torsion of Elastic Spheres in Contact
J. Appl. Mech. June 1951, 18(2): 183–187.
doi: https://doi.org/10.1115/1.4010273
Influence of Flame Front on the Flow Field
J. Appl. Mech. June 1951, 18(2): 188–194.
doi: https://doi.org/10.1115/1.4010274
Topics:
Flames
,
Flow (Dynamics)
,
Fluids
,
Chemical kinetics
,
Chemical energy
,
Chemical reactions
,
Combustion
,
Diffusion (Physics)
,
Dynamics (Mechanics)
,
Heat
Buckling of a Sandwich Cylinder Under Uniform Axial Compressive Load
J. Appl. Mech. June 1951, 18(2): 195–202.
doi: https://doi.org/10.1115/1.4010275
Topics:
Buckling
,
Cylinders
,
Stress
,
Boundary-value problems
,
Aircraft
,
Circular cylinders
,
Design
,
Differential equations
,
Displacement
,
Elasticity
The Propagation of Longitudinal Waves of Plastic Deformation in a Bar of Material Exhibiting a Strain-Rate Effect
J. Appl. Mech. June 1951, 18(2): 203–208.
doi: https://doi.org/10.1115/1.4010276
Topics:
Deformation
,
Longitudinal waves
,
Flow (Dynamics)
,
Stress
Design Data and Methods
The Rectangular Plate Subjected to Hydrostatic Tension and to Uniformly Distributed Lateral Load
J. Appl. Mech. June 1951, 18(2): 209–210.
doi: https://doi.org/10.1115/1.4010277
Topics:
Hydrostatics
,
Stress
,
Tension
Discussions and Closures
Discussion: “Engineering Steels Under Combined Cyclic and Static Stresses” (Gough, H. J., 1950, ASME J. Appl. Mech., 17, pp. 113–125)
J. Appl. Mech. June 1951, 18(2): 211.
doi: https://doi.org/10.1115/1.4010278
Discussion: “Engineering Steels Under Combined Cyclic and Static Stresses” (Gough, H. J., 1950, ASME J. Appl. Mech., 17, pp. 113–125)
J. Appl. Mech. June 1951, 18(2): 211–213.
doi: https://doi.org/10.1115/1.4010279
Discussion: “Engineering Steels Under Combined Cyclic and Static Stresses” (Gough, H. J., 1950, ASME J. Appl. Mech., 17, pp. 113–125)
J. Appl. Mech. June 1951, 18(2): 213–214.
doi: https://doi.org/10.1115/1.4010280
Discussion: “Engineering Steels Under Combined Cyclic and Static Stresses” (Gough, H. J., 1950, ASME J. Appl. Mech., 17, pp. 113–125)
J. Appl. Mech. June 1951, 18(2): 214.
doi: https://doi.org/10.1115/1.4010281
Discussion: “Engineering Steels Under Combined Cyclic and Static Stresses” (Gough, H. J., 1950, ASME J. Appl. Mech., 17, pp. 113–125)
J. Appl. Mech. June 1951, 18(2): 214.
doi: https://doi.org/10.1115/1.4010282
Closure to “Discussions of ‘Engineering Steels Under Combined Cyclic and Static Stresses’” (1951, ASME J. Appl. Mech., 18, pp. 211–214)
J. Appl. Mech. June 1951, 18(2): 214–216.
doi: https://doi.org/10.1115/1.4010283
Topics:
Steel
Discussion: “Natural Frequencies of Continuous Beams of Uniform Span Length” (Ayre, R. S., and Jacobsen, L. S., 1950, ASME J. Appl. Mech., 17, pp. 391–395)
J. Appl. Mech. June 1951, 18(2): 217–218.
doi: https://doi.org/10.1115/1.4010285
Closure to “Discussions of ‘Natural Frequencies of Continuous Beams of Uniform Span Length’” (1951, ASME J. Appl. Mech., 18, pp. 217–218)
J. Appl. Mech. June 1951, 18(2): 218.
doi: https://doi.org/10.1115/1.4010286
Discussion: “Momentum and Mass Transfer in Coaxial Gas Jets” (Forstall, Jr., W., and Shapiro, A. H., 1950, ASME J. Appl. Mech., 17, pp. 399–408)
J. Appl. Mech. June 1951, 18(2): 219.
doi: https://doi.org/10.1115/1.4010287
Topics:
Jets
,
Mass transfer
,
Momentum
Discussion: “Momentum and Mass Transfer in Coaxial Gas Jets” (Forstall, Jr., W., and Shapiro, A. H., 1950, ASME J. Appl. Mech., 17, pp. 399–408)
J. Appl. Mech. June 1951, 18(2): 219–220.
doi: https://doi.org/10.1115/1.4010288
Topics:
Jets
,
Mass transfer
,
Momentum
Closure to “Discussions of ‘Momentum and Mass Transfer in Coaxial Gas Jets’” (1951, ASME J. Appl. Mech., 18, pp. 219–220)
J. Appl. Mech. June 1951, 18(2): 220.
doi: https://doi.org/10.1115/1.4010289
Topics:
Mass transfer
,
Momentum
Discussion: “Plastic Biaxial Stress-Strain Relations for Alcoa 24S-T Subjected to Variable-Stress Ratios” (Marin, Joseph, and Kotalik, B. J., 1950, ASME J. Appl. Mech., 17, pp. 372–376)
J. Appl. Mech. June 1951, 18(2): 221.
doi: https://doi.org/10.1115/1.4010290
Topics:
Stress
,
Stress-strain relations
Closure to “Discussion of ‘Plastic Biaxial Stress-Strain Relations for Alcoa 24S-T Subjected to Variable-Stress Ratios’” (1951, ASME J. Appl. Mech., 18, p. 221)
J. Appl. Mech. June 1951, 18(2): 221.
doi: https://doi.org/10.1115/1.4010291
Topics:
Stress
,
Stress-strain relations
Discussion: “The Uniform Distribution of a Fluid Flowing Through a Perforated Pipe” (Dow, W. M., 1950, ASME J. Appl. Mech., 17, pp. 431–438)
J. Appl. Mech. June 1951, 18(2): 221–222.
doi: https://doi.org/10.1115/1.4010292
Discussion: “The Uniform Distribution of a Fluid Flowing Through a Perforated Pipe” (Dow, W. M., 1950, ASME J. Appl. Mech., 17, pp. 431–438)
J. Appl. Mech. June 1951, 18(2): 222.
doi: https://doi.org/10.1115/1.4010293
Discussion: “The Uniform Distribution of a Fluid Flowing Through a Perforated Pipe” (Dow, W. M., 1950, ASME J. Appl. Mech., 17, pp. 431–438)
J. Appl. Mech. June 1951, 18(2): 222–223.
doi: https://doi.org/10.1115/1.4010294
Closure to “Discussions of ‘The Uniform Distribution of a Fluid Flowing Through a Perforated Pipe’” (1951, ASME J. Appl. Mech., 18, pp. 221–223)
J. Appl. Mech. June 1951, 18(2): 223–224.
doi: https://doi.org/10.1115/1.4010295
Topics:
Fluids
Discussion: “Beam Vibrations With Time-Dependent Boundary Conditions” (Mindlin, R. D., and Goodman, L. E., 1950, ASME J. Appl. Mech., 17, pp. 377–380)
J. Appl. Mech. June 1951, 18(2): 224.
doi: https://doi.org/10.1115/1.4010296
Topics:
Boundary-value problems
,
Vibration
Discussion: “Beam Vibrations With Time-Dependent Boundary Conditions” (Mindlin, R. D., and Goodman, L. E., 1950, ASME J. Appl. Mech., 17, pp. 377–380)
J. Appl. Mech. June 1951, 18(2): 224–226.
doi: https://doi.org/10.1115/1.4010297
Topics:
Boundary-value problems
,
Vibration
Discussion: “Beam Vibrations With Time-Dependent Boundary Conditions” (Mindlin, R. D., and Goodman, L. E., 1950, ASME J. Appl. Mech., 17, pp. 377–380)
J. Appl. Mech. June 1951, 18(2): 226.
doi: https://doi.org/10.1115/1.4010298
Topics:
Boundary-value problems
,
Vibration
Discussion: “Beam Vibrations With Time-Dependent Boundary Conditions” (Mindlin, R. D., and Goodman, L. E., 1950, ASME J. Appl. Mech., 17, pp. 377–380)
J. Appl. Mech. June 1951, 18(2): 226.
doi: https://doi.org/10.1115/1.4010299
Topics:
Boundary-value problems
,
Vibration
Discussion: “Bending of an Elliptical Plate by Edge Loading” (Nash, W. A., 1950, ASME J. Appl. Mech., 17, pp. 269–274)
J. Appl. Mech. June 1951, 18(2): 226–227.
doi: https://doi.org/10.1115/1.4010300
Closure to “Discussion of ‘Bending of an Elliptical Plate by Edge Loading’” (1951, ASME J. Appl. Mech., 18, pp. 226–227)
J. Appl. Mech. June 1951, 18(2): 227.
doi: https://doi.org/10.1115/1.4010301
Discussion: “Matrix Solution for the Vibration of Nonuniform Beams” (Thomson, W. T., 1950, ASME J. Appl. Mech., 17, pp. 337–339)
J. Appl. Mech. June 1951, 18(2): 227.
doi: https://doi.org/10.1115/1.4010302
Topics:
Vibration
Discussion: “Matrix Solution for the Vibration of Nonuniform Beams” (Thomson, W. T., 1950, ASME J. Appl. Mech., 17, pp. 337–339)
J. Appl. Mech. June 1951, 18(2): 227.
doi: https://doi.org/10.1115/1.4010303
Topics:
Vibration
Discussion: “Matrix Solution for the Vibration of Nonuniform Beams” (Thomson, W. T., 1950, ASME J. Appl. Mech., 17, pp. 337–339)
J. Appl. Mech. June 1951, 18(2): 227–228.
doi: https://doi.org/10.1115/1.4010304
Topics:
Vibration
Closure to “Discussions of ‘Matrix Solution for the Vibration of Nonuniform Beams’” (1951, ASME J. Appl. Mech., 18, pp. 227–228)
J. Appl. Mech. June 1951, 18(2): 228.
doi: https://doi.org/10.1115/1.4010305
Topics:
Vibration
Discussion: “Temperature Distribution in a Steady, Laminar, Preheated Air Jet” (Yih, Chia-Shun, 1950, ASME J. Appl. Mech., 17, pp. 381–382)
J. Appl. Mech. June 1951, 18(2): 228.
doi: https://doi.org/10.1115/1.4010306
Topics:
Air jets
,
Temperature distribution
Closure to “Discussion of ‘Temperature Distribution in a Steady, Laminar, Preheated Air Jet’” (1951, ASME J. Appl. Mech., 18, p. 228)
J. Appl. Mech. June 1951, 18(2): 228–229.
doi: https://doi.org/10.1115/1.4010307
Topics:
Temperature distribution
Discussion: “Vibration of Rectangular Plates by the Ritz Method” (Young, Dana, 1950, ASME J. Appl. Mech., 17, pp. 448–453)
J. Appl. Mech. June 1951, 18(2): 229.
doi: https://doi.org/10.1115/1.4010308
Topics:
Plates (structures)
,
Vibration
Discussion: “Vibration of Rectangular Plates by the Ritz Method” (Young, Dana, 1950, ASME J. Appl. Mech., 17, pp. 448–453)
J. Appl. Mech. June 1951, 18(2): 229.
doi: https://doi.org/10.1115/1.4010309
Topics:
Plates (structures)
,
Vibration
Closure to “Discussions of ‘Vibration of Rectangular Plates by the Ritz Method’” (1951, ASME J. Appl. Mech., 18, p. 229)
J. Appl. Mech. June 1951, 18(2): 229.
doi: https://doi.org/10.1115/1.4010310
Topics:
Plates (structures)
,
Vibration
Discussion: “The Stresses Around a Small Opening in a Beam Subjected to Pure Bending” (Joseph, J. A., and Brock, J. S., 1950, ASME J. Appl. Mech., 17, pp. 353–358)
J. Appl. Mech. June 1951, 18(2): 229–231.
doi: https://doi.org/10.1115/1.4010311
Topics:
Stress
Closure to “Discussion of ‘The Stresses Around a Small Opening in a Beam Subjected to Pure Bending’” (1951, ASME J. Appl. Mech., 18, pp. 229–231)
J. Appl. Mech. June 1951, 18(2): 231.
doi: https://doi.org/10.1115/1.4010312
Topics:
Stress
Discussion: “On the General Theory of Thin Shells” (Osgood, W. R., and Joseph, J. A., 1950, ASME J. Appl. Mech., 17, pp. 396–398)
J. Appl. Mech. June 1951, 18(2): 231–232.
doi: https://doi.org/10.1115/1.4010313
Topics:
Thin shells
Closure to “Discussion of ‘On the General Theory of Thin Shells’” (1951, ASME J. Appl. Mech., 18, pp. 231–232)
J. Appl. Mech. June 1951, 18(2): 232.
doi: https://doi.org/10.1115/1.4010314
Email alerts
RSS Feeds
Enhancement of Synchronization in Nonlinear MEMS Oscillator Based on Electrothermal Adjustment
J. Appl. Mech (April 2025)