Presented are the experimental results of two light activated shape memory polymer (LASMP) formulations. The optical stimulus used to activate the materials is detailed including a mapping of the spatial optical intensity at the surface of the sample. From this, results of energy calculations are presented including the amount of energy available for transitioning from the glassy state to the rubbery state and from the rubbery state to the glassy state, highlighting one of the major advantages of LASMP as requiring less energy to transition than thermally activated shape memory polymers. The mechano-optical experimental setup and procedure is detailed and provides a consistent method for evaluating this relatively new class of shape memory polymer. A chemical kinetic model is used to predict both the theoretical glassy state modulus, as only the sample averaged modulus is experimentally attainable, as well as the through thickness distribution of Young’s modulus. The experimental and model results for these second generation LASMP formulations are then compared with earlier LASMP generations (detailed previously in Beblo and Mauck Weiland, 2009, “Light Activated Shape Memory Polymer Characterization,” ASME J. Appl. Mech., 76, pp. 8) and typical thermally activated shape memory polymer.
Skip Nav Destination
e-mail: lmw36@pitt.edu
Article navigation
November 2011
Research Papers
Light Activated Shape Memory Polymer Characterization—Part II
Lisa Mauck Weiland
Lisa Mauck Weiland
Department of Mechanical Engineering and Materials Science,
e-mail: lmw36@pitt.edu
University of Pittsburgh
, Pittsburgh, PA 15261
Search for other works by this author on:
Lisa Mauck Weiland
Department of Mechanical Engineering and Materials Science,
University of Pittsburgh
, Pittsburgh, PA 15261e-mail: lmw36@pitt.edu
J. Appl. Mech. Nov 2011, 78(6): 061016 (9 pages)
Published Online: August 25, 2011
Article history
Received:
March 13, 2010
Revised:
July 8, 2011
Posted:
July 11, 2011
Published:
August 25, 2011
Online:
August 25, 2011
Citation
Beblo, R. V., and Weiland, L. M. (August 25, 2011). "Light Activated Shape Memory Polymer Characterization—Part II." ASME. J. Appl. Mech. November 2011; 78(6): 061016. https://doi.org/10.1115/1.4004552
Download citation file:
Get Email Alerts
Modeling the Dynamic Response of a Light-Driven Liquid Crystal Elastomer Fiber/Baffle/Spring-Coupled System
J. Appl. Mech (December 2024)
Why Biological Cells Cannot Stay Spherical?
J. Appl. Mech (December 2024)
Programmable Supratransmission in a Mechanical Chain with Tristable Oscillators
J. Appl. Mech (December 2024)
Adhesion of a Rigid Sphere to a Freestanding Elastic Membrane With Pre-Tension
J. Appl. Mech (December 2024)
Related Articles
Light Activated Shape Memory Polymer Characterization
J. Appl. Mech (January,2009)
Constitutive Modeling of Shape Memory Effects in Semicrystalline Polymers With Stretch Induced Crystallization
J. Eng. Mater. Technol (October,2010)
A Novel Multimaterial Additive Manufacturing Technique for Fabricating Laminated Polymer Nanocomposite Structures
J. Micro Nano-Manuf (March,2015)
Synthetic Soft Tissue Characterization of the Mechanical Analogue Lumbar Spine
J. Med. Devices (June,2008)
Related Proceedings Papers
Related Chapters
Processing/Structure/Properties Relationships in Polymer Blends for the Development of Functional Polymer Foams
Advances in Multidisciplinary Engineering
Hydrogen Compatibility of Polymers for Infrastructure Applications: Friction and Wear
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments
Behaviour of Polymers in High Pressure Environments as Applicable to the Hydrogen Infrastructure
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments