A porothermoelastic solution of the general problem of the inclined borehole in a transversely isotropic porous material is presented herein and compared with the isotropic porothermoelastic solution. The governing equations are outlined for the case of general anisotropy and specialized for a transversely isotropic poroelastic material under nonhydrostatic and nonisothermal in situ conditions. A superposition scheme is employed to obtain the analytical solutions within the isotropic and transversely isotropic poromechanics theory. The borehole generator is assumed to coincide with the material axis of symmetry, in the case of transverse isotropy, yet subjected to a three-dimensional state of stress. A systematic analysis has been carried out to evaluate the effect of the anisotropy of the poromechanical material parameters as well as the thermal material properties on stress and pore pressure distributions and the potential impact on the overall stability of deep wellbore drilling.
Solutions for the Inclined Borehole in a Porothermoelastic Transversely Isotropic Medium
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the Applied Mechanics Division, January 21, 2004; final revision, March 18, 2004. Editor: R. M. McMeeking. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Journal of Applied Mechanics, Department of Mechanical and Environmental Engineering, University of California—Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication in the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
Abousleiman , Y., and Ekbote, S. (February 1, 2005). "Solutions for the Inclined Borehole in a Porothermoelastic Transversely Isotropic Medium ." ASME. J. Appl. Mech. January 2005; 72(1): 102–114. https://doi.org/10.1115/1.1825433
Download citation file: