Transverse displacement and rotation eigenfunctions for the bending of moderately thick plates are derived for the Mindlin plate theory so as to satisfy exactly the differential equations of equilibrium and the boundary conditions along two intersecting straight edges. These eigenfunctions are in some ways similar to those derived by Max Williams for thin plates a half century ago. The eigenfunctions are called “corner functions,” for they represent the state of stress currently in sharp corners, demonstrating the singularities that arise there for larger angles. The corner functions, together with others, may be used with energy approaches to obtain accurate results for global behavior of moderately thick plates, such as static deflections, free vibration frequencies, buckling loads, and mode shapes. Comparisons of Mindlin corner functions with those of thin-plate theory are made in this work, and remarkable differences are found.
Sharp Corner Functions for Mindlin Plates
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the Applied Mechanics Division, June 5, 2002; final revision, January 8, 2004. Associate Editor: O. O’Reilly. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Journal of Applied Mechanics, Department of Mechanical and Environmental Engineering, University of California—Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Search Site
McGee , O. G., Kim, J. W., and Leissa, A. W. (February 1, 2005). "Sharp Corner Functions for Mindlin Plates ." ASME. J. Appl. Mech. January 2005; 72(1): 1–9. https://doi.org/10.1115/1.1795221
Download citation file:
- Ris (Zotero)
- Reference Manager