A Kolsky torsion bar is utilized successfully in a novel rheometric experiment for measuring the transient large-strain response of polymer melts under high shear-rate loading. A molten low-density polyethylene is studied with the new technique. The results show that the high-rate shear response of the material has an instantaneous rate dependence that may not be discernible at low rates and a strain-dependent hardening that saturates at large strains instead of fading. The usefulness of the technique and the significance of the findings are discussed in comparison with a modified rubberlike liquid theory and high-rate capillary measurements for low-density polyethylene melts.
On the Use of a Kolsky Torsion Bar to Study the Transient Large-Strain Response of Polymer Melts at High Shear Rates
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the Applied Mechanics Division, September 6, 2001; final revision, November 20, 2003. Associate Editor: K. R. Rajagopal. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Journal of Applied Mechanics, Department of Mechanical and Environmental Engineering, University of California–Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication in the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Hu, Y., and Feng, R. (September 7, 2004). "On the Use of a Kolsky Torsion Bar to Study the Transient Large-Strain Response of Polymer Melts at High Shear Rates ." ASME. J. Appl. Mech. July 2004; 71(4): 441–449. https://doi.org/10.1115/1.1756142
Download citation file:
- Ris (Zotero)
- Reference Manager