A new nondimensional number (η) to predict the dominant failure mechanism of fiber reinforced composites under compression loading is presented. Results from previous experimental investigations on the failure of glass fiber reinforced and carbon fiber reinforced vinylester matrix composites, respectively, were used to motivate and develop η. Experimental results available in the open literature are used to compare the predictions of η. This number can be used as a design tool to develop new composite materials with a preferred failure mode. The exercise of developing such a number provides insight into parameters that control the compressive strength of fiber reinforced composite materials.
A Nondimensional Number to Classify Composite Compressive Failure
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the Applied Mechanics Division, June 5, 2003; final revision; November 4, 2003. Associate Editor: M.-J. Pindera. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Journal of Applied Mechanics, Department of Mechanical and Environmental Engineering, University of California–Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication in the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Yerramalli, C. S., and Waas, A. M. (June 22, 2004). "A Nondimensional Number to Classify Composite Compressive Failure ." ASME. J. Appl. Mech. May 2004; 71(3): 402–408. https://doi.org/10.1115/1.1756923
Download citation file:
- Ris (Zotero)
- Reference Manager