The frictional collapse of an assembly of equisized spheres is studied by a discrete element model. The macroscopic constitutive response is determined as a function of the level of Coulomb friction between particles. It is found that the level of Coulomb friction has a strong effect upon the relative proportion of sliding and rolling between particles, and consequently upon the macroscopic strength of the granular assembly. The discrete element predictions are shown to be in good agreement with experimental results obtained from triaxial tests on an aggregate of steel spheres. It is demonstrated that the shape of the collapse surface can be adequately represented by the Lade-Duncan continuum model.
Frictional Collapse of Granular Assemblies
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, October 22, 2002; final revision, October 9, 2003. Editor: R. M. McMeeking. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Journal of Applied Mechanics, Department of Mechanical and Environmental Engineering, University of California–Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Search Site
Suiker, A. S. J., and Fleck, N. A. (June 22, 2004). "Frictional Collapse of Granular Assemblies ." ASME. J. Appl. Mech. May 2004; 71(3): 350–358. https://doi.org/10.1115/1.1753266
Download citation file:
- Ris (Zotero)
- Reference Manager