This work developes a finite element model to compute thermal and thermomechanical phenomena during pulsed laser induced melting and solidification. The essential elements of the model are handling of stress and strain release during melting and their retrieval during solidification, and the use of a second reference temperature, which is the melting point of the target material for computing the thermal stress of the resolidified material. This finite element model is used to simulate a pulsed laser bending process, during which the curvature of a thin stainless steel plate is altered by laser pulses. The bending angle and the distribution of stress and strain are obtained and compared with those when melting does not occur. It is found that the bending angle increases continulously as the laser energy is increased over the melting threshold value.

Issue Section:
Technical Papers
Keywords:
laser beam effects, bending, melting, solidification, thermal stresses, internal stresses, stress-strain relations, finite element analysis
Topics:
Lasers, Melting, Solidification, Stress, Temperature, Finite element analysis
1.
Namba, Y., 1986, “Laser Forming in Space,” International Conference on Lasers, C. P. Wang et al., eds., STS Press, Las Vegas, NV, pp. 403–407.
2.
Scully
,
K.
,
1987
, “
Laser Line Heating
,”
J. Ship Prod.
,
3
, pp.
237
–
246
.
3.
Arnet
,
H.
, and
Vollertsen
,
F.
,
1995
, “
Extending Laser Bending for the Generation of Convex Shapes
,”
Proc. Inst. Mech. Eng.
,
209
, pp.
433
–
442
.
4.
Vollertsen, F., 1994, “Mechanisms and Models for Laser Forming,” Laser Assisted Net Shape Engineering, Proc. of the LANE, M. Geiger et al., eds., Meisenbach, Bamburg, Germany, 1, pp. 345–360.
5.
Geiger
,
M.
, and
Vollertsen
,
F.
,
1993
, “
The Mechanisms of Laser Forming
,”
Annals of the CIRP
,
42
, pp.
301
–
304
.
6.
Chen
,
G.
,
Xu
,
X.
,
Poon
,
C. C.
, and
Tam
,
A. C.
,
1998
, “
Laser-Assisted Microscale Deformation of Stainless Steels and Ceramics
,”
Opt. Eng.
,
37
, pp.
2837
–
2842
.
7.
Chen
,
G.
,
Xu
,
X.
,
Poon
,
C. C.
, and
Tam
,
A. C.
,
1999
, “
Experimental and Numerical Studies on Microscale Bending of Stainless Steel With Pulsed Laser
,”
ASME J. Appl. Mech.
,
66
, pp.
772
–
779
.
8.
Zhang, X., and Xu, X., 2001, “Fundamental and Applications of High Precision Laser Micro-Bending,” IMECE, ASME, New York.
9.
Feng
,
Z.
,
Zacharia
,
T.
, and
David
,
S. A.
, 1997, “Thermal Stress Development in a Nickel Based Superalloy During Weldability Test,” Weld. Res. Suppl.,Nov., pp. 470–483.
10.
Lewis
,
R. W.
, and
Ravindran
,
K.
,
1999
, “
Finite Element Simulation of Metal Casting
,”
Int. J. Numer. Methods Eng.
,
47
, pp.
29
–
59
.
11.
Taljat
,
B.
,
Zacharia
,
T.
, and
Wang
,
X.
, etc., 1998, “Numerical Analysis of Residual Stress Distribution in Tubes With Spiral Weld Cladding,” Weld. Res. Suppl., Aug., pp. 328–335.
12.
Taljat
,
B.
,
Radhakrishman
,
B.
, and
Zacharia
,
T.
,
1998
, “
Numerical Analysis of GTA Welding Process With Emphasis on Post-Solidification Phase Transformation Effects on Residual Stresses
,”
Mater. Sci. Eng., A
,
246
, pp.
45
–
54
.
13.
Maykuth, D. J., 1980, Structural Alloys Handbook, Metals and ceramics information center, Battelee Columbus Laboratories, Columbus, OH, 2, pp. 1–61.
14.
Takeuti
,
Y.
, and
Komori
,
S.
,
1979
, “
Thermal-Stress Problems in Industry 3: Temperature Dependency of Elastic Moduli for Several Metals at Temperatures From −196 to 1000°C
,”
J. Therm. Stresses
,
2
, pp.
233
–
250
.
15.
ABAQUS User’s Manual, Version 5.8, 1997, Hibbitt, Karlsson and Sorensen, Inc.
16.
Carslaw, H. S., and Jaeger, J. C., 1959, Conduction of Heat in Solids, 2nd Ed., Oxford University Press, Oxford, UK, Chap. XI, pp. 285–288.
Copyright © 2004
 by ASME
You do not currently have access to this content.