A method is developed to evaluate the natural frequencies and vibration modes of serpentine belt drives where the belt is modeled as a moving beam with bending stiffness. Inclusion of bending stiffness leads to belt-pulley coupling not captured in moving string models. New dynamic characteristics of the system induced by belt bending stiffness are investigated. The belt-pulley coupling is studied through the evolution of the vibration modes. When the belt-pulley coupling is strong, the dynamic behavior of the system is quite different from that of the string model where there is no such coupling. The effects of major design variables on the system are discussed. The spatial discretization can be used to solve other hybrid continuous/discrete eigenvalue problems.
Coupled Belt-Pulley Vibration in Serpentine Drives With Belt Bending Stiffness
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, Jan. 24, 2003; final revision, July 3, 2003. Associate Editor: O. O’Reilly. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Journal of Applied Mechanics, Department of Mechanical and Environmental Engineering, University of California–Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Kong, L., and Parker, R. G. (March 17, 2004). "Coupled Belt-Pulley Vibration in Serpentine Drives With Belt Bending Stiffness ." ASME. J. Appl. Mech. January 2004; 71(1): 109–119. https://doi.org/10.1115/1.1641064
Download citation file:
- Ris (Zotero)
- Reference Manager