Numerous accelerometer configurations have been proposed and implemented by previous researches to determine parameters of the motion of the body to which the accelerometers are attached. To date, there has been no study of the geometric requirements of such configurations. This paper presents the requirements for minimal configurations for the case of general planar motion.
Planar Accelerometer Configurations
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the Applied Mechanics Division, July 4, 2002; final revision, June 9, 2003. Associate Editor: O. O’Reilly. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Journal of Applied Mechanics, Department of Mechanical and Environmental Engineering, University of California–Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication in the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Williams, T. R., and Fyfe, K. R. (March 17, 2004). "Planar Accelerometer Configurations ." ASME. J. Appl. Mech. January 2004; 71(1): 10–14. https://doi.org/10.1115/1.1640365
Download citation file:
- Ris (Zotero)
- Reference Manager