Mathematical models, for the stress analyses of unidirectional end notch flexure and end notch cantilever specimens using classical beam theory, first, second, and third-order shear deformation beam theories, have been developed to determine the interlaminar fracture toughness of unidirectional composites in mode II. In the present study, appropriate matching conditions, in terms of generalized displacements and stress resultants, have been derived and applied at the crack tip by enforcing the displacement continuity at the crack tip in conjunction with the variational equation. Strain energy release rate has been calculated using compliance approach. The compliance and strain energy release rate obtained from present formulations have been compared with the existing experimental, analytical, and finite element results and found that results from third-order shear deformation beam theory are in close agreement with the existing experimental and finite element results.
Higher-Order Beam Theories for Mode II Fracture of Unidirectional Composites
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, Apr. 12, 2002; final revision, Mar. 24, 2003. Associate Editor: R. C. Benson. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Department of Mechanical and Environmental Engineering, University of California–Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
Kumar, D. V. T. G. P., and Prasad, B. K. R. (January 5, 2004). "Higher-Order Beam Theories for Mode II Fracture of Unidirectional Composites ." ASME. J. Appl. Mech. November 2003; 70(6): 840–852. https://doi.org/10.1115/1.1607357
Download citation file: