An infinite bimaterial system made of two dissimilar, transversely isotropic materials bonded together (with the lower material being mathematically degenerate) and subject to remote loads is considered. An analytical expression for the complex stress intensity factor of a finite crack along the interface between these two materials is obtained. This result is extended to the case of an infinite array of collinear cracks along a similar interface. Next, the finite element method is employed to analyze these geometries for specific material properties. An area M-integral is used to extract stress intensity factors from the finite element results, which compare well with those obtained from the analytic expressions. Different types of loads are considered.
Stress Intensity Factors for Finite Interface Cracks Between a Special Pair of Transversely Isotropic Materials
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, Mar. 10, 2000; final revision, Nov. 14, 2000. Associate Editor: K. Ravi-Chandar. Discussion on the paper should be addressed to the Editor, Prof. Lewis T. Wheeler, Department of Mechanical Engineering, University of Houston, Houston, TX 77204-4792, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Boniface, V., and Banks-Sills, L. (May 3, 2002). "Stress Intensity Factors for Finite Interface Cracks Between a Special Pair of Transversely Isotropic Materials ." ASME. J. Appl. Mech. May 2002; 69(3): 230–239. https://doi.org/10.1115/1.1459067
Download citation file:
- Ris (Zotero)
- Reference Manager