Thermal curvature changes and membrane strains are analyzed for elastic shallow shell substrates which are coated by thin, generally inelastic, inhomogeneous and anisotropic layers. The analysis is restricted to linear kinematics. It is shown that the deformation is governed by the corresponding solution for a flat substrate and a correction due to the initial curvature. The correction is determined from a shallow shell problem for the bare substrate with a loading expressed by the coefficients of thermal curvature for the substrate/layer system. For constant initial curvatures, certain analytic solutions are presented. For situations when the initial deflection of the substrate is much larger than the substrate thickness, a boundary layer solution is derived. In the particular case of a circular isotropic substrate with a spherical initial curvature and a coating of arbitrary anisotropy, the solution is presented in closed form. For nonflat substrates, measured curvatures can generally not be used to extract layer stresses without a proper compensation for the initial curvature. In the paper, it is explicitly presented how to accurately compensate for a spherical initial curvature. The results are particularly discussed in relation to curvature measurements on Silicon substrates.
Thermal Deformation of Initially Curved Substrates Coated by Thin Inhomogeneous Layers
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, March 8, 2000; final revision, October 19, 2000. Associate Editor: S. Kyriakides. Discussion on the paper should be addressed to the Editor, Professor Lewis T. Wheeler, Department of Mechanical Engineering, University of Houston, Houston, TX 77204-4792, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Wikstro¨m , A., and Gudmundson, P. (October 19, 2000). "Thermal Deformation of Initially Curved Substrates Coated by Thin Inhomogeneous Layers ." ASME. J. Appl. Mech. March 2001; 68(2): 298–303. https://doi.org/10.1115/1.1357169
Download citation file:
- Ris (Zotero)
- Reference Manager