Martensitic transformation occurs in a diffusionless manner at high velocity, with acoustic emission (AE) being generated during the process. The AE signal contains information about the dynamic process of martensitic transformation. In this analysis, a model is developed for the AE signal, or dynamic displacement, from the transformation strains and the growth process of martensitic transformation in an elastic half-space using Green’s functions. The AE signal amplitude is found to be inversely proportional to the distance between the martensite source and the sensor, and to the duration of transformation. It also depends on the orientation of the martensite plate. The spectral bandwidth increases as the duration of plate formation decreases. In addition, raising the carbon content increases the fraction of plate martensite, and consequently the signal amplitude.
Skip Nav Destination
Acoustic Emission From Single-Plate Martensitic Transformation
Xiangying Liu ,
Automated Analysis Corporation, Peoria, IL 61615
Elijah Kannatey-Asibu, Jr.
Department of Mechanical Engineering and Applied Mechanics, The University of Michigan, Ann Arbor, MI 48109
- Views Icon Views
- Share Icon Share
- Search Site
Liu, X., and Kannatey-Asibu, E., Jr. (December 1, 1991). "Acoustic Emission From Single-Plate Martensitic Transformation." ASME. J. Appl. Mech. December 1991; 58(4): 889–894. https://doi.org/10.1115/1.2897702
Download citation file:
Get Email Alerts
An Enhancement of the Warping Shear Functions of Refined Zigzag Theory
J. Appl. Mech (August 2021)