Computation of Thermal Deformation of Thrust Bearing Pad Concerning the Convection by Non-Uniform Oil Flow Available to Purchase

Tilting-pad thrust bearings are used to support the loads of large rotating machinery, such as water turbine generators. When such machines are in operation, thermal deformation is so extensive that it is comparable to deformation caused by the pressure of the oil film, and it influences the bearing’s performance. So, the temperature distribution in the pad, which determines the thermal deformation, should be calculated correctly. This requires precise estimation of the convection by the ambient oil at the pad’s surfaces, but the complexity of the pad’s shape and ambient oil flow of oil around it makes this estimation difficult. Using CFD (Computational Fluid Dynamics) software, we computed the temperature distribution in the pad by solving the heat transfer in the pad, in the oil and interfaces of them simultaneously. The thermal and stress deformation were then calculated by the FEM code and is used in oil film analysis to determine the characteristics of the bearing. Comparing its results with the experimental ones validated the computational process.