Skip Nav Destination
Proceedings Papers
In This Volume
World Tribology Congress III, Volume 2
Bearing Design and Application
Rheological Modeling of Lubrication Flows (Keynote)
WTC 2005; 5-6https://doi.org/10.1115/WTC2005-64397
Topics:
Flow (Dynamics)
,
Lubrication
,
Modeling
,
Rheology
,
Fluids
,
Design
,
Nanoscale phenomena
A Test Rig for Air Bearings Dynamic Characterization
WTC 2005; 7-8https://doi.org/10.1115/WTC2005-63036
Topics:
Air bearings
,
Damping
,
Design
,
Stiffness
,
Testing
,
Bearings
,
Computer software
,
Data acquisition
,
Displacement
,
Excitation
Integrated Design of Highly Loaded Sliding Surfaces of a Huge Ball-Joint
Pieter Samyn, Wim Van Paepegem, Patrick De Baets, Joris Degrieck, J. S. Leendertz, Eric Suister, Ludo Van Schepdael
WTC 2005; 31-32https://doi.org/10.1115/WTC2005-63200
Topics:
Design
,
Polymers
,
Disks
,
Finite element methods
,
Finite element model
,
Lubricants
,
Retaining walls
,
Rotation
,
Sprays
,
Storms
Bearing Performance Limits With Grease Lubrication
WTC 2005; 35-36https://doi.org/10.1115/WTC2005-63205
Topics:
Bearings
,
Lubrication
,
Bearing design
,
Lubricants
,
Particle spin
,
Rotation
,
Spin (Aerodynamics)
,
Damage
,
Design
,
Failure
The Thermoelastic Behavior of Thrust Washer Bearings Considering Boundary Lubrication and Asperity Contact
WTC 2005; 39-40https://doi.org/10.1115/WTC2005-63240
Topics:
Bearings
,
Boundary lubrication
,
Thermoelasticity
,
Thrust
,
Deformation
,
Thermomechanics
,
Helical gears
,
Lift (Fluid dynamics)
,
Lubrication
,
Planetary gears
Sensibility Analysis of Design Parameters for Journal Bearings Optimization of Mass Balancing Systems
WTC 2005; 41-42https://doi.org/10.1115/WTC2005-63243
Topics:
Design
,
Journal bearings
,
Optimization
,
Film thickness
,
Pressure
,
Clearances (Engineering)
,
Industrial lubrication systems
,
Combustion
,
Engines
,
Failure
Commercial Spool Pump Bearing Performance Testing
WTC 2005; 49-50https://doi.org/10.1115/WTC2005-63282
Topics:
Bearings
,
Pumps
,
Testing performance
,
Engines
,
Fluids
,
Lubricants
,
Motors
,
Accelerated life testing
,
Ball bearings
,
Ceramics
A New Model of Thermoelastohydrodynamic Lubrication in Dynamically Loaded Journal Bearings
WTC 2005; 53-54https://doi.org/10.1115/WTC2005-63291
Topics:
Journal bearings
,
Lubrication
,
Temperature
,
Algorithms
,
Bearings
,
Finite element methods
,
Finite element model
,
Boundary layers
,
Deformation
,
Film thickness
Research of New Factors Affecting Rolling Contact Fatigue Life
WTC 2005; 73-74https://doi.org/10.1115/WTC2005-63400
Topics:
Fatigue life
,
Rolling contact
,
Pressure
,
Bearings
,
Countermeasures
,
Cycles
,
Stress
,
Fatigue
,
Life testing
Effects of Grooving in a Circular Step Thrust Bearing
WTC 2005; 79-80https://doi.org/10.1115/WTC2005-63431
Topics:
Thrust bearings
,
Stress
,
Inertia (Mechanics)
,
Pressure
,
Bearings
,
Film thickness
,
Flow (Dynamics)
,
Geometry
,
Lubricants
,
Rotation
Passive Magnetic Bearings: Low Instability and Possible Stability
WTC 2005; 89-90https://doi.org/10.1115/WTC2005-63546
Topics:
Magnetic bearings
,
Stability
,
Bearings
,
Friction
,
Permanent magnets
,
Space
,
Wear
Design and Hydrodynamic Performance of Hybrid Flexural Pivot Gas Bearings for High Speed Oil-Free Micro Turbomachinery
WTC 2005; 91-92https://doi.org/10.1115/WTC2005-63561
Topics:
Design
,
Gas bearings
,
Turbomachinery
,
Rotors
,
Stiffness
,
Bearings
,
Engineering simulation
,
Simulation
,
Vibration
,
Clearances (Engineering)
Theoretical and Experimental Investigation of Frictional and Thermal Behavior in Oscillatory Sliding Line Contact
WTC 2005; 95-96https://doi.org/10.1115/WTC2005-63572
Topics:
Boundary-value problems
,
Bushings
,
Design
,
Engineering simulation
,
Finite element methods
,
Friction
,
Heat
,
Modeling
,
Pressure
,
Simulation
Foil Bearings Makes Oil-Free Turbocharger Possible
WTC 2005; 113-114https://doi.org/10.1115/WTC2005-63724
Topics:
Bearings
,
Coatings
,
Foil bearings
,
Gas turbines
,
Rolling bearings
,
Turbochargers
,
Turbomachinery
Non-Linear Description of Floating Ring Bearings Rotordynamics
WTC 2005; 119-120https://doi.org/10.1115/WTC2005-63799
Topics:
Bearings
,
Rotordynamics
,
Chaos
,
Bifurcation
,
Design
,
Errors
,
Excitation
,
Manufacturing
,
Rotors
,
Turbochargers
The Narrow Groove Analysis Revisited
WTC 2005; 121-122https://doi.org/10.1115/WTC2005-63803
Topics:
Ambiguity
,
Computation
,
Finite element analysis
,
Microscale devices
,
Pressure
,
Thrust bearings
Effect of Journal Misalignment on the Oil Film Pressure and Temperature Distribution of 3-Lobe Offset Journal Bearing
WTC 2005; 127-128https://doi.org/10.1115/WTC2005-63828
Topics:
Journal bearings
,
Pressure
,
Temperature distribution
,
Bearings
,
Rotors
,
Stability
,
Bearing design
,
Compressors
,
Design
,
Machinery
Calculation of High Speed Multilobe Journal Bearings
WTC 2005; 129-130https://doi.org/10.1115/WTC2005-63829
Topics:
Journal bearings
,
Bearings
,
Turbulence
,
Clearances (Engineering)
,
Compressors
,
Flow (Dynamics)
,
Gear trains
,
Lubricants
,
Turbines
,
Viscosity
Analysis of Oil Film Temperature Distribution of the High Speed Shaft Journal Bearings of Gear Box Applied in the Coal Mine Hoisting Machine
WTC 2005; 135-136https://doi.org/10.1115/WTC2005-63842
Topics:
Coal mining
,
Gears
,
Journal bearings
,
Machinery
,
Temperature distribution
,
Bearings
,
Equilibrium (Physics)
,
Gear trains
,
Stress
,
Temperature
Simulation and Optimum Design of Journal Porous Metal Bearing Under Elastohydrodynamic Lubrication
WTC 2005; 139-143https://doi.org/10.1115/WTC2005-63860
Topics:
Bearings
,
Design
,
Elastohydrodynamic lubrication
,
Metals
,
Simulation
,
Stress
,
Computer software
,
Deformation
,
Finite element analysis
,
Finite element methods
Modeling of Velocity-Dependent Rolling Friction in Linear Microball Bearings
WTC 2005; 157-158https://doi.org/10.1115/WTC2005-64025
Topics:
Bearings
,
Modeling
,
Rolling friction
,
Dampers
,
Springs
,
Algorithms
,
Friction
Cross-Sectional Analysis of Antiwear Films and Near-Surface Material From Tapered Roller Bearings
WTC 2005; 159-160https://doi.org/10.1115/WTC2005-64060
Topics:
Tapered roller bearings
,
Wear
,
Bearings
,
Electron diffraction
,
Focused ion beams
,
Gears
,
Imaging
,
Mineral oil
,
Spectroscopy
,
Sulfur
The Robust Stability of a Wave Bearing
WTC 2005; 161-162https://doi.org/10.1115/WTC2005-64084
Topics:
Bearings
,
Stability
,
Waves
,
Journal bearings
,
Linear systems
,
Theorems (Mathematics)
,
Uncertainty
On the Influence of the Supply Pressure on the Dynamic Stability of Hybrid Gas Journal Wave Bearings
WTC 2005; 167-168https://doi.org/10.1115/WTC2005-64108
Topics:
Bearings
,
Dynamic stability
,
Pressure
,
Waves
,
Stability
,
Whirls
,
Clearances (Engineering)
,
Fluid films
,
Hydrodynamic stability
,
Journal bearings
The Effect of Lubricant Viscosity-Temperature Characteristics on the Performance of Plain Journal Bearings
WTC 2005; 181-182https://doi.org/10.1115/WTC2005-64229
Topics:
Journal bearings
,
Lubricants
,
Temperature
,
Viscosity
,
Bearings
,
Film thickness
,
Friction
,
Minerals
,
Operating temperature
,
Performance characterization
Grease Performance in Tapered Roller Bearings
WTC 2005; 189-190https://doi.org/10.1115/WTC2005-64352
Topics:
Bearings
,
Film thickness
,
Lubrication
,
Operating temperature
,
Rollers
,
Rolling bearings
,
Stress
,
Tapered roller bearings
,
Temperature
,
Testing
Machine Components
Tribological Aspects of Wind Power Plants
WTC 2005; 195-199https://doi.org/10.1115/WTC2005-63019
Topics:
Renewable energy sources
,
Sustainability
,
Tribology
,
Wind
,
Wind energy
,
Wind farms
Development of Friction Drive Transmission
WTC 2005; 201-202https://doi.org/10.1115/WTC2005-63073
Topics:
Friction
,
Stiffness
,
Torque
,
Design
,
Motors
,
Rollers
,
Signals
,
Torquemeters
,
Wedges
,
Power density
Tribology Without Friction: Limited Travel Solid State Design Elements
WTC 2005; 205-207https://doi.org/10.1115/WTC2005-63188
Topics:
Design
,
Friction
,
Tribology
,
Couplings
,
Durability
,
Gears
,
Maintenance
,
Stiffness
,
Stress
,
Universal joints
Tribological Characteristics of a Dynamic O-Ring in Abrasive Environment
WTC 2005; 209-210https://doi.org/10.1115/WTC2005-63190
Topics:
Seals
,
Tribology
,
Wear
,
Sealing (Process)
,
Temperature
,
Torque
,
Friction
,
Rubber
,
Sealants
Prediction Model of Surface Topography Evolution Due to Micropitting
WTC 2005; 213-214https://doi.org/10.1115/WTC2005-63273
Topics:
Failure
,
Finishes
,
Steady state
,
Stress
,
Surface roughness
,
Testing
,
Wear
Evaluation of Ultra High Speed Micro Traction Drive
WTC 2005; 215-216https://doi.org/10.1115/WTC2005-63288
Topics:
Traction
,
Temperature
,
Ball bearings
,
Bearings
,
Engines
,
Lubrication
,
Motors
,
Testing equipment
The Transient Thermal Stress and Deflection of a Brake
WTC 2005; 217-218https://doi.org/10.1115/WTC2005-63292
Topics:
Brakes
,
Deflection
,
Thermal stresses
,
Transients (Dynamics)
,
Disks
,
Temperature
,
Brittleness
,
Finite element methods
,
Friction
,
Heat flux
Gear Pitting Life Prediction and Comparison With Experiments
WTC 2005; 225-226https://doi.org/10.1115/WTC2005-63352
Topics:
Gears
,
Fatigue life
,
Lubrication
,
Stress
,
Design
,
Pressure
,
Lubricants
,
Stress analysis (Engineering)
,
Surface roughness
,
Failure
Tribology Character of Steel Archimedes Worm Gear
WTC 2005; 227-228https://doi.org/10.1115/WTC2005-63353
Topics:
Steel
,
Tribology
,
Worm gears
,
Lubricants
,
Wear
,
Friction
,
Circuits
,
Copper
,
Pressure
Scuffing Failure Analysis Due to an Abrasive Contaminant in High Pressure Injection Fuel System
WTC 2005; 231-232https://doi.org/10.1115/WTC2005-63381
Topics:
Failure analysis
,
Fuel systems
,
High pressure (Physics)
,
Temperature
,
Failure
,
Particle size
,
Particulate matter
,
Filters
,
Materials properties
,
Wear
Design of the Stator Inner Contour for a Compressor
WTC 2005; 233-234https://doi.org/10.1115/WTC2005-63410
Topics:
Compressors
,
Design
,
Stators
,
Flow (Dynamics)
,
Theorems (Mathematics)
Tribological Characteristics of Coated Vane Surfaces Under Mixed Environments of Various Oils and CO2 as a Refrigerant
WTC 2005; 235-236https://doi.org/10.1115/WTC2005-63412
Topics:
Carbon dioxide
,
Oils
,
Petroleum
,
Refrigerants
,
Tribology
,
Compressors
,
Coatings
,
Friction
,
Wear
,
High pressure (Physics)
Ultrasonic Measurement of Wheel Hub/Axle Interference Fit Pressures
WTC 2005; 239-240https://doi.org/10.1115/WTC2005-63454
Topics:
Press fits
,
Ultrasonic measurement
,
Wheels
,
Dimensions
,
Geometry
,
Joining
,
Manufacturing
,
Torque
Thermal Influence on Torque Transfer of Wet Clutches in Limited Slip Differential Applications
Pa¨r Marklund, Rikard Ma¨ki, Roland Larsson, Erik Ho¨glund, Michael M. Khonsari, Joonyoung Jang, Bager Ganemi, Richard Olsson
WTC 2005; 245-246https://doi.org/10.1115/WTC2005-63532
Topics:
Torque
,
Boundary lubrication
,
Stress
Thrust Bearing-Relieving Disk of Multistage Centrifugal Pump
WTC 2005; 253-254https://doi.org/10.1115/WTC2005-63858
Topics:
Bearings
,
Centrifugal pumps
,
Disks
,
Thrust
,
Wear
,
Design
,
Fluids
,
Dewatering
,
Flow (Dynamics)
,
Hydrostatics
Simulation of Wear in a Worm Gear Under Elastohydrodynamic Conditions
WTC 2005; 255-256https://doi.org/10.1115/WTC2005-63886
Topics:
Simulation
,
Wear
,
Worm gears
,
Wheels
,
Elastohydrodynamic lubrication
,
Film thickness
,
Gear teeth
,
Pressure
,
Shapes
Experimental Investigation on the Characteristics of Honeycomb Seals and Its Application to Steam Turbine
WTC 2005; 257-258https://doi.org/10.1115/WTC2005-63949
Topics:
Honeycomb structures
,
Steam turbines
,
Leakage
,
Air flow
,
Energy dissipation
,
Excitation
,
Gas flow
,
Lubrication
,
Stability
,
Steam
Friction and Wear of Engineering Polymer Gears
WTC 2005; 259-260https://doi.org/10.1115/WTC2005-63961
Topics:
Friction
,
Gears
,
Polymer engineering
,
Wear
,
Polymers
,
Corrosion resistance
,
Lubrication
,
Machinery
,
Manufacturing
,
Metals
Study on Influence of Air Pressure on Braking Condition
WTC 2005; 261-262https://doi.org/10.1115/WTC2005-63990
Topics:
Braking
,
Pressure
,
Stress
,
Friction
,
Automotive brakes
,
Temperature
,
Brakes
,
Disks
,
Drag (Fluid dynamics)
,
Heat
Numerical Simulations for Friction Induced Vibrations Considering Temperature-Dependence Effect
Yusaku Nagata, Kenichi Suzuki, Yoichi Kumemura, Mitsuhiro Nagasaka, Takashi Yamamoto, Osamu Hirayama
WTC 2005; 279-280https://doi.org/10.1115/WTC2005-64185
Topics:
Brakes
,
Computer simulation
,
Friction
,
Temperature
,
Temperature effects
,
Vibration
Coupled Evolution of Load Distribution and Wear on Lead Screw Threads
WTC 2005; 281-282https://doi.org/10.1115/WTC2005-64223
Topics:
Screw threads
,
Stress
,
Wear
,
Thread
,
Pressure
,
Screws
,
Wear testing
,
Fasteners
,
Lubricants
,
Steady state
Thermo-Mechanical Deformation in Heat Sink Seal Rings
WTC 2005; 283-284https://doi.org/10.1115/WTC2005-64228
Topics:
Deformation
,
Heat sinks
,
Thermomechanics
,
Heat exchangers
,
Sealing (Process)
,
Temperature
,
Thermal deformation
,
Wear
Surface Engineering and Coatings
Optimizing Coated Contacts by 3D FEM Stress Modelling and Fracture Toughness Determination (Keynote)
WTC 2005; 295-296https://doi.org/10.1115/WTC2005-64137
Topics:
Finite element methods
,
Fracture toughness
,
Modeling
,
Stress
,
Coating processes
,
Coatings
,
Fracture (Materials)
,
Steel
,
Diamonds
,
Friction
The Future of Plasma-Based Surface Engineering Techniques in Tribology (Keynote)
WTC 2005; 297-298https://doi.org/10.1115/WTC2005-64180
Topics:
Plasmas (Ionized gases)
,
Surface engineering
,
Tribology
,
Coatings
,
Engineers
,
Wear
,
Bulk solids
,
Ceramic coatings
,
Ceramics
,
Engineering disciplines
Tribological Behaviour of the Diamond/Steel Couple: Influence of the Temperature
WTC 2005; 305-306https://doi.org/10.1115/WTC2005-63140
Topics:
Diamonds
,
Steel
,
Temperature
,
Tribology
,
Diamond films
,
Friction
,
Coatings
,
Disks
,
Stress
,
Chemical properties
Nano Particles’ Behavior in Chemical Mechanical Polishing With the Effect of Non-Newtonian Properties of Slurry
WTC 2005; 309-310https://doi.org/10.1115/WTC2005-63170
Topics:
Nanoparticles
,
Polishing
,
Slurries
,
Fracture (Materials)
,
Fracture (Process)
,
Pressure
,
Fatigue
,
Film thickness
,
Particle size
,
Particulate matter
Effects of Laser Surface Texturing on the Microstructure and Frictional Characteristics of Zirconia Surfaces Under Liquid and Solid Lubrication
WTC 2005; 311-312https://doi.org/10.1115/WTC2005-63197
Topics:
Lasers
,
Lubrication
,
Nanoindentation
,
Acoustics
,
Elastic moduli
,
Friction
,
Galling
,
Graphite
,
Lubricants
,
Microcracks
PVD-Based Microstructuring Surface Techniques for Tribological Applications
WTC 2005; 325-326https://doi.org/10.1115/WTC2005-63303
Topics:
Photolithography
,
Tribology
,
Surface texture
,
Disks
,
Friction
,
Laser ablation
,
Lasers
,
Lubricants
,
Lubrication
,
Microscopy
Improved Fatigue Life Cycle Using Surface Finish and Surface Coating in a Cam-Roller System: Multi-Scale System Analysis and Verification
WTC 2005; 327-328https://doi.org/10.1115/WTC2005-63310
Topics:
Coating processes
,
Coatings
,
Cycles
,
Fatigue life
,
Finishes
,
Rollers
,
Systems analysis
,
Stress
,
Failure
,
Finishing
Prediction of the Thermo-Mechanical Contact Behaviour of a Graded Coating/Substrate System Using Advanced Numerical Techniques
WTC 2005; 329-330https://doi.org/10.1115/WTC2005-63335
Topics:
Coatings
,
Thermomechanics
,
Stress
,
Computer simulation
,
Elasticity
,
Modeling
,
Optimization
,
Service life (Equipment)
,
Temperature
,
Thermoelasticity
Friction and Wear of Diamond-Like Carbon Coatings Lubricated With Biodegradable Oils
WTC 2005; 331-332https://doi.org/10.1115/WTC2005-63340
Topics:
Biodegradation
,
Diamond films
,
Friction
,
Oils
,
Petroleum
,
Wear
,
Steel
,
Coatings
,
Disks
,
Ester
Tribological Properties of Carbide Layers Produced in the Vacuum Titanizing Process
Ewa Kasprzycka, Jan Senatorski, Aleksander Nakonieczny, Marian Szczerek, Tomasz Babul, Bogdan Bogdan´ski
WTC 2005; 333-335https://doi.org/10.1115/WTC2005-63344
Topics:
Diffusion (Physics)
,
Tribology
,
Vacuum
,
Wear resistance
Degradation of W-DLC Coatings in Rolling/Sliding Applications
WTC 2005; 339-340https://doi.org/10.1115/WTC2005-63358
Topics:
Coatings
,
Wear
,
Polishing
,
Delamination
,
Fracture (Materials)
,
Fracture (Process)
,
Stress
,
Cycles
,
Design
,
Fatigue life
Movements and Collisions of Nanoparticles in Two Phase Flow
WTC 2005; 355-356https://doi.org/10.1115/WTC2005-63442
Topics:
Collisions (Physics)
,
Nanoparticles
,
Two-phase flow
,
Flow (Dynamics)
,
Fluids
,
Oils
,
Particulate matter
,
Petroleum
,
Slurries
,
Tribology
Increasing Seizure Resistance of Friction Pairs Using Combined Micro Relief
WTC 2005; 359-360https://doi.org/10.1115/WTC2005-63469
Topics:
Friction
,
Grinding
,
Lubrication
,
Lubricants
,
Metals
,
Polymers
,
Reservoirs
,
Surface roughness
,
Wear
A Geometrically Defined All-Diamond Pad Conditioner
WTC 2005; 361-362https://doi.org/10.1115/WTC2005-63472
Topics:
Diamonds
,
Anisotropy
,
Etching
,
Process control
,
Semiconductor wafers
,
Silicon
,
Synthetic diamonds
Temperature Dependence of Friction Coefficient in Ultrahigh Vacuum for Hydrogenated Amorphous Carbon Coating
WTC 2005; 369-370https://doi.org/10.1115/WTC2005-63513
Topics:
Carbon
,
Coatings
,
Friction
,
Temperature effects
,
Vacuum
,
Temperature
,
Lubricants
,
Mechanical properties
,
Tribochemistry
,
Tribology
Applications of Carbon Based Nano-Particles to Space and Aeronautics Lubrication
WTC 2005; 373-374https://doi.org/10.1115/WTC2005-63553
Topics:
Aeronautics
,
Carbon
,
Lubrication
,
Nanoparticles
,
Tribology
,
Tribometers
,
Alloys
,
Bulk solids
,
Ceramics
,
Coatings
Perturbation Analysis of Texture Effects on Lubricated Devices
WTC 2005; 381-382https://doi.org/10.1115/WTC2005-63571
Topics:
Texture (Materials)
,
Friction
,
Shapes
,
Bearings
,
Mathematical analysis
,
Stress
Tribological Properties of Magnetron Sputtered MoS2/Metal (Ti, Mo) Nanocomposite Coatings
WTC 2005; 387-388https://doi.org/10.1115/WTC2005-63588
Topics:
Coatings
,
Metals
,
Nanocomposites
,
Tribology
,
Composite materials
,
Aluminum alloys
,
Disks
,
Friction
,
Lubricants
,
Scanning electron microscopy
An Investigation of Fretting Wear Behaviour of a Ternary (Zr,Hf)N Coating
WTC 2005; 395-396https://doi.org/10.1115/WTC2005-63637
Topics:
Coatings
,
Wear
,
Zirconium
,
Steel
,
Wear testing
,
Adhesion
,
Surface roughness
,
Tool steel
,
Vapor deposition
,
Wear resistance
Self-Replenishing, Self-Repairing Solid Lubrication: Modelling and Experimentation
WTC 2005; 409-410https://doi.org/10.1115/WTC2005-63707
Topics:
Lubrication
,
Maintenance
,
Modeling
,
Disks
,
Friction
,
Particulate matter
,
Tribology
,
Tribometers
,
Wear
Quantitative In-Situ Measurement of Asperity Compression During Chemical Mechanical Planarization
Caprice Gray, Daniel Apone, Chris Rogers, Vincent P. Manno, Chris Barns, Mansour Moinpour, Sriram Anjur, Ara Philipossian
WTC 2005; 425-426https://doi.org/10.1115/WTC2005-63805
Topics:
Calibration
,
Compressibility
,
Compression
,
Emissions
,
Film thickness
,
Fluorescence
,
Lasers
,
Polishing
,
Resolution (Optics)
,
Semiconductor wafers
The Relative Friction Force Contributions of Polishing Pads and Slurries During Chemical Mechanical Polishing
WTC 2005; 427-428https://doi.org/10.1115/WTC2005-63817
Topics:
Friction
,
Polishing
,
Slurries
,
Nanoscale phenomena
,
Dielectric materials
,
Damage
,
Integrated circuits
,
Particulate matter
,
Shear (Mechanics)
,
Silicon
A Mechanism of Sliding on the Nanometer-Thick Ag Layers
WTC 2005; 429-430https://doi.org/10.1115/WTC2005-63818
Topics:
Atoms
,
Augers
,
Cycles
,
Diamonds
,
Electron diffraction
,
Electron spectroscopy
,
Film thickness
,
Friction
,
Particulate matter
,
Reflection
Lubricated Sliding Wear of Textured Surfaces
WTC 2005; 431-432https://doi.org/10.1115/WTC2005-63819
Topics:
Capacitance
,
Etching
,
Film thickness
,
Friction
,
Lubricants
,
Lubrication
,
Polishing
,
Thick films
,
Wear
Evaluation of Near Frictionless Carbon Coatings Using Four-Ball Wear Tester
WTC 2005; 433-434https://doi.org/10.1115/WTC2005-63867
Topics:
Carbon
,
Coatings
,
Wear
,
Wear testing
Design of Abrasion Resistant Surfaces by Textures on Macroscopic Size
WTC 2005; 437-438https://doi.org/10.1115/WTC2005-63884
Topics:
Abrasion
,
Design
,
Texture (Materials)
,
Wear
,
Abrasives
,
Minerals
,
Particulate matter
,
Surface texture
,
Geometry
,
Grain size
Adhesion and Friction on the Nanometer Scale: Energy Dissipation During Sliding of Antimony Islands on Graphite and MoS2
WTC 2005; 441-442https://doi.org/10.1115/WTC2005-63898
Topics:
Adhesion
,
Energy dissipation
,
Friction
,
Graphite
,
Nanoscale phenomena
,
Particulate matter
,
Nanoparticles
,
Microscopes
,
Molybdenum
Boundary Lubrication of DLC Coatings With Conventional Oils
WTC 2005; 443-444https://doi.org/10.1115/WTC2005-63906
Topics:
Boundary lubrication
,
Diamond films
,
Oils
,
Petroleum
,
Temperature
,
Tribology
Super Low Friction Property of DLC Lubricated With Ester-Containing Oil: Part 2 — Nanometer-Scale Morphological, Structural and Frictional Properties
WTC 2005; 447-448https://doi.org/10.1115/WTC2005-63921
Topics:
Atomic force microscopy
,
Ester
,
Friction
,
Nanoscale phenomena
,
Disks
,
Coating processes
,
Coatings
,
Lubrication
,
Tribology
,
Boundary lubrication
Phase Structure and Lubricity of In-Situ Generated Protective Layer on Worn Metal Surfaces in Presence of Mg6Si4O10(OH)8
WTC 2005; 449-450https://doi.org/10.1115/WTC2005-63927
Topics:
Metal surfaces
,
Iron
,
Anisotropy
,
Chemistry
,
Magnesium (Metal)
,
Magnets
,
Nanocrystals
,
Nanoparticles
,
Tribology
,
Wear
Towards Superlubricity Under Boundary Lubrication
WTC 2005; 453-454https://doi.org/10.1115/WTC2005-63953
Topics:
Boundary lubrication
,
Friction
,
Coatings
,
Lubricants
,
Vacuum
,
Automotive industry
,
Carbon
,
Corporate average fuel economy
,
Diamond films
,
Engines
Dishing and Erosion in Cu-CMP
WTC 2005; 459-460https://doi.org/10.1115/WTC2005-63978
Atomistics of Friction
WTC 2005; 463-464https://doi.org/10.1115/WTC2005-63993
Topics:
Atoms
,
Energy dissipation
,
Friction
,
Kinetic energy
,
Phase space
,
Sliding friction
,
Stiction
,
Surface roughness
Atomic-Scale Observation of Superlubricity
WTC 2005; 465-466https://doi.org/10.1115/WTC2005-64003
Topics:
Dimensions
,
Energy dissipation
,
Friction
,
Graphite
,
Lubricants
,
Microscopes
,
Shear (Mechanics)
,
Tungsten
Scuffing Resistance of Laser Textured Surfaces
WTC 2005; 467-469https://doi.org/10.1115/WTC2005-64013
Topics:
Coatings
,
Lasers
,
Nanocomposites
Copper CMP Mimicked With Atomic Force Microscopy
WTC 2005; 471-472https://doi.org/10.1115/WTC2005-64018
Topics:
Atomic force microscopy
,
Copper
,
Polishing
,
Particulate matter
,
Slurries
,
Friction
Investigation of Scuffing Resistance and Tribological Performance of Laser Modified Surfaces
WTC 2005; 477-478https://doi.org/10.1115/WTC2005-64030
Topics:
Lasers
,
Tribology
,
Friction
,
Sliding friction
,
Cladding systems (Building)
,
Damage
,
Deformation
,
Failure
,
High power lasers
,
Shock (Mechanics)
Response of CVD Boron Carbide to Repetitive Indentation Cycles to Simulate Solid Particle Impact Erosion Mechanisms
WTC 2005; 481-482https://doi.org/10.1115/WTC2005-64066
Topics:
Boron
,
Chemical vapor deposition
,
Cycles
,
Erosion
,
Particle collisions
,
Coatings
,
Durability
,
Nanoindentation
,
Particulate matter
,
Stress
Quantifying the Effect of Lubricant Elasticity on Micro Textured Surfaces
WTC 2005; 483-484https://doi.org/10.1115/WTC2005-64074
Topics:
Elasticity
,
Lubricants
,
Fluids
,
Friction
,
Nickel
,
Rheology
,
Sliding friction
Effect of Atomic-Scale Surface Roughness on Friction
WTC 2005; 487-488https://doi.org/10.1115/WTC2005-64093
Topics:
Friction
,
Surface roughness
,
Atoms
,
Dimensions
,
Solids
,
Deformation
,
Engineering simulation
,
Plasticity
,
Probes
,
Simulation
Relating Friction in CMP to Topography Evolution
WTC 2005; 493-494https://doi.org/10.1115/WTC2005-64115
Topics:
Friction
,
Copper
,
Density
,
Engines
,
Erosion
,
Film thickness
,
Integrated circuit fabrication
,
Motors
,
Polishing
,
Wear
Variations of a Ni-P Surface Layer After Nanoparticle Impacts
WTC 2005; 495-496https://doi.org/10.1115/WTC2005-64131
Topics:
Nanoparticles
,
Particulate matter
,
Wear
,
Coatings
,
Collisions (Physics)
,
Crystals
,
Fluids
,
Nanoscale phenomena
,
Polishing
Some Tribological Aspects of the Duplex Coatings With Additional Ion Bombardment
WTC 2005; 513-514https://doi.org/10.1115/WTC2005-64218
Topics:
Coatings
,
Ion implantation
,
Tribology
,
Ions
,
Geometry
,
Grain size
,
Irradiation (Radiation exposure)
,
Lubrication
,
Nitriding
,
Plasmas (Ionized gases)
The Impact of Chemical Mechanical Planarization Polishing on a Surface Textured With Deterministic Microasperities
WTC 2005; 523-524https://doi.org/10.1115/WTC2005-64292
Topics:
Polishing
,
Stainless steel
,
Corners (Structural elements)
,
Disks
,
Electrodeposition
,
Lubrication
,
Machinery
,
Nickel
,
Photolithography
Tribological Behavior of Oil-Lubricated Laser Textured Surfaces in Conformal Flat and Point Contacts
WTC 2005; 525-526https://doi.org/10.1115/WTC2005-64309
Topics:
Lasers
,
Tribology
,
Friction
,
Wear
,
Disks
,
Lubricants
,
Lubrication
,
Steel
,
Stress
Self-Lubricating Cylinder Liner Coatings
WTC 2005; 527-528https://doi.org/10.1115/WTC2005-64318
Topics:
Coatings
,
Cylinders
,
Friction
,
Wear
,
Composite materials
,
Engines
,
Heat
,
High temperature
,
Lubricants
,
Piston rings
Vapor Deposition of Composite Organic-Inorganic Films
WTC 2005; 533-535https://doi.org/10.1115/WTC2005-64335
Topics:
Coatings
,
Composite materials
,
Self-assembly
,
Stability
,
Vapor deposition
Tribology of Internal Combustion Engines
Calculation and Optimization of Tribocontacts and Lubrication Systems of Internal Combustion Engines for Various Types of Lubricant
WTC 2005; 539-540https://doi.org/10.1115/WTC2005-63021
Topics:
Industrial lubrication systems
,
Internal combustion engines
,
Lubricants
,
Optimization
,
Design
,
Fuel efficiency
,
Oils
,
Petroleum
,
Reliability
,
Steady state
A Contact-Wear Model for the EHL Analysis of Engine Journal Bearings
WTC 2005; 549-550https://doi.org/10.1115/WTC2005-63270
Topics:
Engines
,
Journal bearings
,
Wear
,
Bearings
,
Film thickness
,
Lubrication
,
Pressure
Optimization of the Cylinder Liner Surface for Reduction of Oil Consumption
WTC 2005; 559-560https://doi.org/10.1115/WTC2005-63464
Topics:
Cylinders
,
Emissions
,
Engines
,
Film thickness
,
Friction
,
Optimization
,
Particulate matter
,
Piston rings
,
Pistons
,
Trucks
Effect of Lubricant Darkening on Wear Properties of White Metal Bearing in 2-Stroke Marine Diesel Engine
WTC 2005; 565-566https://doi.org/10.1115/WTC2005-63593
Topics:
Bearings
,
Diesel engines
,
Lubricants
,
Metals
,
Wear
,
Wear testing
,
Particulate matter
,
Babbitt metal
,
Contamination
,
Durability
Theoretical Analysis of Piston Ring Frictional Loss in an Innovative Rotating Liner Internal Combustion Engine
WTC 2005; 573-574https://doi.org/10.1115/WTC2005-63725
Topics:
Internal combustion engines
,
Piston rings
,
Theoretical analysis
,
Friction
,
Lubrication
,
Cylinders
,
Flow (Dynamics)
,
Lubricants
,
Rolling friction
,
Rotation
Major Advances in Tribology for Low Heat Rejection Engines: A Ten-Year Overview
WTC 2005; 575-576https://doi.org/10.1115/WTC2005-63742
Topics:
Engines
,
Heat
,
Tribology
,
Lubricants
,
Diesel engines
,
High temperature
,
Army
,
Coatings
,
Coolants
,
Density
Modeling Oil Evaporation From the Engine Cylinder Liner With Consideration of the Transport of Oil Species Along the Liner
WTC 2005; 579-580https://doi.org/10.1115/WTC2005-63984
Topics:
Engine cylinders
,
Evaporation
,
Modeling
,
Pistons
,
Compression
,
Gasoline engines
,
Lubrication
,
Spacetime
,
Temperature
Influence of Cam Surface Finish and Roughness on Frictional Power Loss in Valve Trains With Roller Tappets
WTC 2005; 581-582https://doi.org/10.1115/WTC2005-63994
Topics:
Finishes
,
Rollers
,
Surface roughness
,
Trains
,
Valves
,
Friction
,
Design
,
Grinding
,
Internal combustion engines
,
Rolling contact
Shaft Center Orbit in Dynamically Loaded Radial Bearings
WTC 2005; 583-584https://doi.org/10.1115/WTC2005-64036
Topics:
Bearings
,
Damping
,
Journal bearings
,
Mechanical admittance
,
Rotors
,
Stability
The Tribological and Chemical Analysis of Top Ring Zone Samples of Fully Formulated Oil Taken From a Four Stroke Gasoline Engine
WTC 2005; 585-586https://doi.org/10.1115/WTC2005-64076
Topics:
Gasoline engines
,
Tribology
,
Engines
,
Fuel consumption
,
Oils
,
Petroleum
,
Piston rings
,
Pressure
,
Steady state
,
Stress
The Erosion-Corrosion of Intake Valve Sealing Surfaces Due to the Formation of Lubricating Oil Deposits
WTC 2005; 589-590https://doi.org/10.1115/WTC2005-64227
Topics:
Corrosion
,
Erosion
,
Lubricating oils
,
Sealing (Process)
,
Valves
,
Metals
,
Oxidation
,
Combustion gases
,
Cracking (Materials)
,
Electrons
The Measurement of Component Friction Losses in a Fired Engine: Part 1 — Experimental Method
WTC 2005; 595-596https://doi.org/10.1115/WTC2005-64252
Topics:
Engines
,
Friction
,
Lubricants
,
Data acquisition systems
,
Sensors
,
Bearings
,
Corporate average fuel economy
,
Cylinders
,
Fuel efficiency
,
Gasoline engines
Experimental and Theoretical Evaluation of Simultaneous Piston Assembly, Valve Train and Engine Bearing Friction in a Fired Engine
WTC 2005; 599-600https://doi.org/10.1115/WTC2005-64255
Topics:
Bearings
,
Engines
,
Friction
,
Manufacturing
,
Pistons
,
Trains
,
Valves
,
Lubricants
,
Fuel efficiency
,
Tribology
Wear Resistance of Smooth Automotive Cylinder Liner Surfaces
WTC 2005; 603-604https://doi.org/10.1115/WTC2005-64281
Topics:
Cylinders
,
Wear resistance
,
Engines
,
Finishes
,
Fuel consumption
,
Coating processes
,
Coatings
,
Machining
,
Piston rings
,
Vehicles
Development of a High Temperature Tribological Lubricant for Low Heat Rejection High Temperature Operation Diesel Engines
WTC 2005; 605-606https://doi.org/10.1115/WTC2005-64342
Topics:
Diesel engines
,
Heat
,
High temperature
,
Lubricants
,
Tribology
,
Engines
,
Army
,
Cooling systems
,
Cylinders
,
Friction
Ceramic Coated Piston Rings for Internal Combustion Engines
WTC 2005; 607-608https://doi.org/10.1115/WTC2005-64343
Topics:
Ceramics
,
Internal combustion engines
,
Piston rings
,
Coatings
,
Diesel engines
,
Engines
,
Ceramic coatings
,
Compression
,
Friction
,
Wear
Biomaterials and Biomedical Applications
Magnetically Suspended Rotary Blood Pump (Keynote)
WTC 2005; 611-612https://doi.org/10.1115/WTC2005-63681
Topics:
Blood
,
Magnetic bearings
,
Pumps
,
Thrust bearings
Contact Mechanics Analysis and Initial Stability of Press-Fit Metal-on-Metal Hip Resurfacing Prostheses
WTC 2005; 627-628https://doi.org/10.1115/WTC2005-63337
Topics:
Contact mechanics
,
Metals
,
Press fits
,
Prostheses
,
Stability
,
Bone
,
Bearings
,
Friction
,
Finite element methods
,
Finite element model
An In-Vitro Investigation of Sliding Friction Between Biomaterials for Cartilage Substitution and Articular Cartilage
WTC 2005; 629-630https://doi.org/10.1115/WTC2005-63350
Topics:
Biomaterials
,
Cartilage
,
Sliding friction
,
Friction
,
Hydrogels
,
Wear
,
Arthroplasty
,
Fluids
,
Geometry
,
Polymers
Effect of Acetabular Cup Design on the Tribology of Metal-on-Metal Hip Resurfacing Replacements: A Contact Mechanics and Elastohydrodynamic Lubrication Study
WTC 2005; 631-632https://doi.org/10.1115/WTC2005-63356
Topics:
Contact mechanics
,
Design
,
Elastohydrodynamic lubrication
,
Metals
,
Tribology
,
Clearances (Engineering)
,
Bearings
,
Fluid film lubrication
,
Prostheses
,
Bone
Development of a Novel Wear Testing Device for the Investigation of Articular Cartilage and Compliant Polymers for Use in Biomedical Implants
WTC 2005; 635-636https://doi.org/10.1115/WTC2005-63370
Topics:
Biomedicine
,
Cartilage
,
Polymers
,
Wear testing
,
Arthroplasty
,
Biomaterials
,
Design
,
Fluids
,
Lubrication
,
Molecular weight
Modeling of the Generation of UHMWPE Particles With Microfabricated Surface Textures
WTC 2005; 643-644https://doi.org/10.1115/WTC2005-63495
Topics:
Modeling
,
Particulate matter
,
Surface texture
,
Shapes
,
Cutting
,
Design
,
Failure
,
Particle size
,
Wear
,
Wedges
Ultrasound as a Tool to Measure the Wear of Human Tooth Enamel
WTC 2005; 645-646https://doi.org/10.1115/WTC2005-63499
Topics:
Enameling
,
Human teeth
,
Ultrasound
,
Wear
,
Flight
,
Probes
,
Resonance
,
Transducers
Effects of Biological Lubrication on the Morphology of UHMWPE Wear Particles Generated With Surface Textures
WTC 2005; 647-648https://doi.org/10.1115/WTC2005-63501
Topics:
Lubrication
,
Particulate matter
,
Surface texture
,
Wear
,
Shapes
,
Arthroplasty
,
Artificial joints
,
Dimensions
,
Failure mechanisms
,
Molecular weight
Wear Evaluation of Crosslinked UHMWPE for Knee Prostheses Using a Multi-Station Rolling-Sliding Tribotester
WTC 2005; 649-650https://doi.org/10.1115/WTC2005-63533
Topics:
Knee joint prostheses
,
Tribotesters
,
Wear
,
Oxidation
,
Annealing
,
Bearings
,
Failure
,
Failure mechanisms
,
Fatigue
,
Fatigue failure
Objective Lifetime Design of Orthopaedic Joint Replacements: Are We There Yet?
WTC 2005; 651-652https://doi.org/10.1115/WTC2005-63560
Topics:
Arthroplasty
,
Design
,
Orthopedics
,
Computation
,
Kinematics
,
Pressure
,
Stress
,
Wear
Load Scenarios Influence Fluid Absorption of Polyethylene
WTC 2005; 653-654https://doi.org/10.1115/WTC2005-63578
Topics:
Absorption
,
Fluids
,
Stress
,
Wear
,
Lubricants
,
Weight (Mass)
,
Arthroplasty
,
Cycles
,
Lubrication
,
Pins (Engineering)
Wear Reduction by Functional Protein Boundary Film on Poly(Vinyl Alcohol) Hydrogel
WTC 2005; 655-656https://doi.org/10.1115/WTC2005-63623
Topics:
Ethanol
,
Hydrogels
,
Proteins
,
Wear
,
Cartilage
,
Fluorescence
,
Glass
,
Lubricants
,
Microscopes
,
Prostheses
The Role of Synovial Fluid Properties in a Dynamic Hip Joint Simulation
WTC 2005; 659-660https://doi.org/10.1115/WTC2005-63661
Topics:
Fluids
,
Simulation
,
Tribology
,
Biotribology
,
Dynamic models
,
Ethics
,
Modeling
,
Pressure
,
Simulation models
,
Stress
Modification of Microscopic Zirconia Surface Structure for Improvement in Tribological Characteristics of UHMWPE-on-Zirconia Sliding Pair for Joint Prostheses
WTC 2005; 661-662https://doi.org/10.1115/WTC2005-63675
Topics:
Prostheses
,
Tribology
,
Ceramics
,
Crystals
,
Friction
,
Heat treating (Metalworking)
,
Molecular weight
Biotribological Behavior of Boronized Tungsten
WTC 2005; 665-666https://doi.org/10.1115/WTC2005-63692
Topics:
Biotribology
,
Tungsten
,
Atomic force microscopy
,
Wear
,
Biomaterials
,
Corrosion resistance
,
Disks
,
Fluids
,
Friction
,
Tribometers
Tribological Performance of Cell-Treated Nickel Matrix
WTC 2005; 667-668https://doi.org/10.1115/WTC2005-63694
Topics:
Nickel
,
Tribology
,
Disks
,
Dry friction
,
Lubrication
,
Surface properties
,
Tribometers
The Effects of Stress State in Dental Biocontacts
WTC 2005; 671-672https://doi.org/10.1115/WTC2005-63697
Topics:
Stress
,
Fracture (Materials)
,
Tribology
,
Biomechanics
,
Cavities
,
Dental materials
,
Fatigue
,
Microcracks
,
Physiology
Fiberscopic Visualization of Total Knee Replacement Contact Kinematics During In Vitro Simulation
WTC 2005; 673-674https://doi.org/10.1115/WTC2005-63699
Topics:
Kinematics
,
Knee joint prostheses
,
Simulation
,
Visualization
,
Shear (Mechanics)
,
Wear
,
Bearings
,
Contact mechanics
,
Design
,
Imaging
Behavior of Sucking Disks Under Vertical and Tangential Load
WTC 2005; 675-676https://doi.org/10.1115/WTC2005-63745
Topics:
Disks
,
Tangential loading
,
Stress
,
Biological tissues
,
Cavities
,
Friction
,
Pressure
,
Surgery
,
Sustainability
Temporomandibular Joint Arthroplasty: Using Metal-on-Metal and Acrylic-on-Metal Configurations
WTC 2005; 677-678https://doi.org/10.1115/WTC2005-63830
Topics:
Arthroplasty
,
Metals
,
Wear
,
Biological tissues
,
Particulate matter
,
Wear testing
,
Design
,
Durability
,
Scanning electron microscopes
,
Testing
3D Characterization of Surface State in a Knee Prosthesis
WTC 2005; 679-680https://doi.org/10.1115/WTC2005-63850
Topics:
Knee joint prostheses
,
Finishing
,
Prostheses
,
Surface roughness
,
Wear
,
Biomedicine
,
Bone
,
Cobalt
,
Fourier transforms
,
Friction
A Review of DLC Coatings for Biological Applications
WTC 2005; 681-682https://doi.org/10.1115/WTC2005-63879
Topics:
Biomedicine
,
Diamond films
,
Lubricants
,
Proteins
,
Wear
,
Blood
,
Fluids
,
Metals
,
Tribology
,
Water
Biotribological Behavior of Ultra High Molecular Weight Polyethylene Composites Containing Nature Coral
WTC 2005; 683-684https://doi.org/10.1115/WTC2005-63914
Topics:
Biotribology
,
Composite materials
,
Molecular weight
,
Arthroplasty
,
Ceramics
,
Disks
,
Displacement
,
Elastic moduli
,
Fluids
,
Friction
Wear of Dental Cutting Tools Coated With Nanocrystalline Diamond Coatings
WTC 2005; 685-686https://doi.org/10.1115/WTC2005-63922
Topics:
Cutting tools
,
Diamond films
,
Wear
,
Diamonds
,
Drilling
,
Resins
,
Alloys
,
Amalgams
,
Binders (Materials)
,
Bridges (Structures)
Lubricin Interaction With Hyaluronate Promotes Interchain Association Leading to Network Formation
WTC 2005; 691-692https://doi.org/10.1115/WTC2005-64017
Topics:
Boundary lubrication
,
Cartilage
,
Fluids
,
Lubricants
,
Mechanical properties
,
Particulate matter
,
Rheology
,
Shear (Mechanics)
,
Stress
Initial Wear Characterization of a Spinal Artificial Disc
WTC 2005; 693-694https://doi.org/10.1115/WTC2005-64099
Topics:
Disks
,
Wear
,
Stress
,
Cycles
,
Failure
,
Knee joint prostheses
,
Lumbar spine
,
Prostheses
,
Testing
Acoustic Tribology of Human Skin
WTC 2005; 699-700https://doi.org/10.1115/WTC2005-64216
Topics:
Acoustics
,
Skin
,
Tribology
,
Friction
,
Acoustic emissions
,
Surface roughness
,
Cornea
,
Mechanical properties
,
Stiffness
Plasma-Enhanced Surface Modification of Biopolymers
WTC 2005; 701-702https://doi.org/10.1115/WTC2005-64235
Topics:
Biopolymers
,
Plasmas (Ionized gases)
,
Polymers
,
Biocompatibility
,
Adhesion
,
Friction
,
Arthroplasty
,
Biomedicine
,
Cartilage
,
Catheters
Micro- and Nanotribology
The Tribology of Carbon, Hydrogen, and Silicon-Containing Solid Lubricants (Keynote)
WTC 2005; 707-708https://doi.org/10.1115/WTC2005-63141
Topics:
Carbon
,
Hydrogen
,
Lubricants
,
Silicon
,
Tribology
,
Atoms
,
Chain
,
Diamonds
,
Engineering simulation
,
Friction
Surface Treatments for Modifying the Tribological Behavior of Microsystems (Keynote)
WTC 2005; 711-713https://doi.org/10.1115/WTC2005-63573
Topics:
Microelectromechanical systems
,
Surface finishing
,
Tribology
,
Coatings
,
Silicon
,
Polysilicon
,
Adhesion
,
Friction
,
Lubricants
,
Manganese (Metal)
Direct Mechanical Measurement of Organised Water and the Influence of Adjacent Surface Chemistry Using Atomic Force Microscopy (Keynote)
WTC 2005; 717-718https://doi.org/10.1115/WTC2005-64383
Topics:
Atomic force microscopy
,
Surface science
,
Water
,
Adhesion
,
Dimensions
,
Membranes
,
Probes
,
Proteins
Integration of a Molecular Viscosity Model and a Continuum EHL Solution for Simulation of Thin Film Lubrication
WTC 2005; 721-722https://doi.org/10.1115/WTC2005-63091
Topics:
Simulation
,
Thin film lubrication
,
Viscosity
,
Film thickness
,
Oscillations
,
Pressure
,
Shear (Mechanics)
,
Solidification
,
Thin films
Amorphous Carbon Thin Films for Interfaces in MEMS
WTC 2005; 723-724https://doi.org/10.1115/WTC2005-63147
Topics:
Carbon
,
Friction
,
Microelectromechanical systems
,
Thin films
A Finite Element Based Technique for Simulating Sliding Wear
WTC 2005; 731-732https://doi.org/10.1115/WTC2005-63196
Topics:
Disks
,
Finite element analysis
,
Machinery
,
Simulation
,
Wear
A Micro-Tribotester for Evaluating Friction and Wear on Side Contacting Surfaces in Bulk-Microfabricated Devices
WTC 2005; 743-744https://doi.org/10.1115/WTC2005-63317
Topics:
Friction
,
Tribotesters
,
Wear
,
Silicon
,
Sliding friction
,
Deflection
,
Design
,
Displacement
,
Excitation
,
Finite element methods
Modeling Multiscale Contact in MEMS
WTC 2005; 747-748https://doi.org/10.1115/WTC2005-63368
Micro/Nano-Tribological Behavior of Octadecyltrichlorosilane on Silicon as a Coating for MEMS
WTC 2005; 759-760https://doi.org/10.1115/WTC2005-63491
Topics:
Coating processes
,
Coatings
,
Microelectromechanical systems
,
Silicon
,
Tribology
,
Atomic force microscopy
,
Wear
,
Failure
,
Friction
,
Hydrophobicity
Effects of Adhesion and Friction on the Pattern Transfer in Nanoimprint Lithography: A Molecular Dynamics Simulation
WTC 2005; 773-774https://doi.org/10.1115/WTC2005-63652
Topics:
Adhesion
,
Friction
,
Lithography
,
Molecular dynamics simulation
,
Polymer films
,
Molecular dynamics
,
Simulation
,
Simulation results
Sliding Induced Nanocrystals on Si
WTC 2005; 775-776https://doi.org/10.1115/WTC2005-63670
Topics:
Nanocrystals
,
Crystals
,
Atomic force microscopy
,
Stress
,
Surface characterization
Effect of Colloidal Probe Random Surface Features on Adhesion
WTC 2005; 779-780https://doi.org/10.1115/WTC2005-63701
Topics:
Adhesion
,
Probes
,
Atomic force microscopy
,
Adhesives
,
Stress
,
Glass
,
Bearings
,
Cantilevers
,
Contact mechanics
,
Imaging
Nanoscale Surface Force Measurement
WTC 2005; 781-782https://doi.org/10.1115/WTC2005-63702
Topics:
Force measurement
,
Nanoscale phenomena
,
Probes
,
Surface roughness
,
Adhesion
,
Atomic force microscopy
,
Cantilevers
,
Geometry
,
Interferometry
,
Lasers
Nano-Scale Tribology Study of Organic Adlayer-Metal Interface Using Quartz Crystal Microbalance Combined With Scanning Tunneling Microscopy
WTC 2005; 791-792https://doi.org/10.1115/WTC2005-63732
Topics:
Metals
,
Nanoscale phenomena
,
Quartz crystals
,
Scanning tunneling microscopy
,
Tribology
,
Heating
,
Imaging
Nanodynamics of Vapor-Phase Organophosphates on Silicon and OTS for MEMS Lubrication Purposes
WTC 2005; 793-794https://doi.org/10.1115/WTC2005-63734
Topics:
Lubrication
,
Microelectromechanical systems
,
Silicon
,
Vapors
,
Atomic force microscopy
,
Polysilicon
,
Tribology
,
Electrodes
,
Quartz crystals
,
Raman spectroscopy
Micro/Nano Scale Wear Behavior of Pearlitic and Bainitic Rail Steels
WTC 2005; 795-796https://doi.org/10.1115/WTC2005-63735
Topics:
Rails
,
Steel
,
Wear
,
Durability
,
Stress
,
Work hardening
Vapor Phase Lubrication of Gold/Gold Interfaces
WTC 2005; 799-800https://doi.org/10.1115/WTC2005-63773
Topics:
Lubrication
,
Vapors
,
Adhesion
,
Microelectromechanical systems
,
Electrical conductivity
,
Actuators
,
Atomic force microscopy
,
Chain
,
Currents
,
Design
Measurement of Force and Displacement for the Tribological Analysis of MEMS
WTC 2005; 805-806https://doi.org/10.1115/WTC2005-63841
Topics:
Displacement
,
Force measurement
,
Microelectromechanical systems
,
Tribology
,
Friction
,
Calibration
,
Electrostatic actuators
,
Electrostatics
,
Metrology
,
Stress
The Effects of Silicone Oil Contamination on the Contact Resistance of MEMS Electrical Contact Surfaces
WTC 2005; 807-808https://doi.org/10.1115/WTC2005-63843
Topics:
Contact resistance
,
Contamination
,
Microelectromechanical systems
,
Silicones
,
Stress
,
Cycles
,
Metals
,
Peak load
,
Reliability
,
Adhesion
Tribological Properties of Nano/Micro-Patterned PMMA Surfaces on Silicon Wafer
WTC 2005; 815-816https://doi.org/10.1115/WTC2005-63964
Topics:
Semiconductor wafers
,
Tribology
,
Friction
,
Adhesion
,
Atomic force microscopy
,
Biomimetics
,
Lithography
,
Microscale devices
,
Nanoscale phenomena
,
Thin films
Contact Evolution in a Micromechanical Switch
WTC 2005; 817-818https://doi.org/10.1115/WTC2005-63970
Topics:
Switches
,
Adhesion
,
Atomic force microscopy
,
Cantilevers
,
Deformation
,
Manganese (Metal)
,
Mechanical properties
,
Testing
A Molecular Dynamics Study on the Static and Dynamic Properties of Lubricant PFPE in Hard Disk Driver
WTC 2005; 825-826https://doi.org/10.1115/WTC2005-64026
Topics:
Disks
,
Lubricants
,
Molecular dynamics
,
Polymers
,
Computers
,
Durability
,
Engineering simulation
,
Reliability
,
Shapes
,
Simulation
Surface Adhesion and Friction in Microelectromechanical Systems: Measurement and Modification Techniques
WTC 2005; 831-832https://doi.org/10.1115/WTC2005-64107
Topics:
Adhesion
,
Friction
,
Microelectromechanical systems
,
Failure
,
Micromachining
,
Self-assembly
,
Stiffness
,
Surface energy
,
Thin films
A New Technique for Contact Mechanics and Friction in Microstructures: Controllable Electrostatic Repulsive Forces From Capacitive Coupling to Electret
WTC 2005; 833-834https://doi.org/10.1115/WTC2005-64149
Topics:
Contact mechanics
,
Friction
,
Polymer films
,
Cantilever beams
,
Density
,
Microelectromechanical systems
Effects of Tip Compliance in Friction Force Microscopy
WTC 2005; 837-838https://doi.org/10.1115/WTC2005-64288
Topics:
Friction
,
Microscopy
,
Stick-slip
,
Atoms
,
Microcantilevers
,
Nanoscale phenomena
Condition Monitoring and Knowledge-Based Maintenance
Expert-Free Wear Particle Morphology Analysis (Keynote)
WTC 2005; 847-848https://doi.org/10.1115/WTC2005-64388
Topics:
Particulate matter
,
Wear
,
Machinery
,
Condition monitoring
,
Classification
,
Databases
,
Failure
Acoustic Emission Analysis for Monitoring of Tribological Systems
WTC 2005; 849-850https://doi.org/10.1115/WTC2005-63117
Topics:
Acoustic emissions
,
Bearings
,
Downtime
,
Engines
,
Failure
,
Machinery
,
Maintenance
,
Measurement systems
,
Monitoring systems
,
Ships
Analyzing Oil Analysis: Part One
WTC 2005; 853-854https://doi.org/10.1115/WTC2005-63178
Topics:
Computer software
,
Condition monitoring
,
Data acquisition
,
Expert systems
,
Instrumentation
,
Maintenance
,
Rendering
,
Storage
,
Testing
,
Wear
New Generation of Smart Sensors
WTC 2005; 861-862https://doi.org/10.1115/WTC2005-63695
Topics:
Sensors
,
Testing
,
Algorithms
,
Computer software
,
Coolants
,
Electronics
,
Engines
,
Instrumentation
,
Insulation
,
Lubricants
The Influence of the Design Parameters on Performance of Thin Film Temperature Sensor
WTC 2005; 863-864https://doi.org/10.1115/WTC2005-63765
Topics:
Design
,
Temperature sensors
,
Thin films
,
Machinery
,
Failure
,
Advanced materials
,
Condition monitoring
,
Elastohydrodynamic lubrication
,
Lubrication
,
Pressure
Journal Bearing Misalignment as an Extension of Knowledge-Base of Large Power Turboset Diagnostic System
WTC 2005; 881-882https://doi.org/10.1115/WTC2005-63928
Topics:
Bearings
,
Computer simulation
,
Condition monitoring
,
Film thickness
,
Journal bearings
,
Power stations
,
Simulation
,
Testing
,
Vibration
Fault Detection and Lubricant Health Monitoring for Slow Bearings in Extreme Operating Conditions
WTC 2005; 885-886https://doi.org/10.1115/WTC2005-64019
Topics:
Bearings
,
Flaw detection
,
Lubricants
,
Aircraft
,
Failure
,
Vibration
,
Aerospace industry
,
Algorithms
,
Control systems
,
Dynamic models
A Web-Based Intelligent System for Used-Oil Analysis
WTC 2005; 889-890https://doi.org/10.1115/WTC2005-64047
Topics:
Computer software
,
Computers
,
Inspection
,
Internet
,
Machinery
,
Particulate matter
,
Tribology
,
Wear
A Comparative Study of Air-Coupled Ultrasound Sensor and Accelerometer in Detecting Bearing Defects
WTC 2005; 893-894https://doi.org/10.1115/WTC2005-64282
Topics:
Accelerometers
,
Bearings
,
Ultrasonic transducers
,
Sensors
,
Nondestructive evaluation
,
Signals
,
Fatigue cracks
,
Spectra (Spectroscopy)
,
Vibration
Establishment of the Accuracy and Consistency of Using Automatic Image Analysis to Classify Wear Debris Particles
WTC 2005; 895-896https://doi.org/10.1115/WTC2005-64385
Topics:
Particulate matter
,
Wear
,
Computer software
,
Databases
,
Engines
,
Failure mechanisms
,
Filters
,
Industrial lubrication systems
,
Microscopes
Aerospace Applications
Testing and Comparative Evaluation of Space Shuttle Main Engine Flowmeter Bearings
WTC 2005; 909-910https://doi.org/10.1115/WTC2005-63299
Topics:
Bearings
,
Engines
,
Flowmeters
,
Space vehicles
,
Testing
,
Hydrogen
,
Manufacturing
,
Space flight
,
Torque
Observations of Tool Life and Wear Mechanisms in High Speed Machining of Ti-6Al-4V With PCD Tools Using High Pressure Coolant Supply
WTC 2005; 913-914https://doi.org/10.1115/WTC2005-63367
Topics:
Coolants
,
High pressure (Physics)
,
High speed machining
,
Wear
,
Machining
,
Adhesion
,
Titanium alloys
,
Alloys
,
Cutting tools
,
Galling
Development of Highly Hydrogenated DLC Coatings for Solid Lubricant Applications in Space
WTC 2005; 915-916https://doi.org/10.1115/WTC2005-63450
Topics:
Diamond films
,
Lubricants
,
Coatings
,
Vacuum
,
Friction
,
Stress
,
Nitrogen
,
Wear
,
Carbon
,
Cycles
Laser Surface Processing of “Chameleon” Coatings for Aerospace Tribology
WTC 2005; 919-920https://doi.org/10.1115/WTC2005-63489
Topics:
Aerospace industry
,
Coatings
,
Lasers
,
Tribology
,
Lubricants
,
Reservoirs
,
Density
,
Steel
,
Carbon
,
Ceramic coatings
Gas Foil Journal Bearing Power Loss at High Ambient Pressure
WTC 2005; 925-926https://doi.org/10.1115/WTC2005-63543
Topics:
Journal bearings
,
Pressure
,
Bearings
,
Aeronautics
,
Design
,
Electricity (Physics)
,
Engines
,
Flow (Dynamics)
,
Gas bearings
,
Helium
Effects of the Fraction of PTFE and Film Thickness on Wear and Friction in an ePTFE and Epoxy Composite Solid Lubricant Coating
WTC 2005; 929-930https://doi.org/10.1115/WTC2005-63555
Topics:
Coating processes
,
Coatings
,
Composite materials
,
Epoxy adhesives
,
Epoxy resins
,
Film thickness
,
Friction
,
Lubricants
,
Wear
,
Density
Superlow Friction of WS2 Coatings in Ultrahigh Vacuum at Low Temperature
Masanori Iwaki, Thierry Le Mogne, Julien Fontaine, Jean-Michel Martin, Shuichiro Watanabe, Junichi Noshiro
WTC 2005; 931-932https://doi.org/10.1115/WTC2005-63763
Topics:
Coatings
,
Friction
,
Low temperature
,
Vacuum
,
Lubricants
,
Disks
,
Molybdenum
,
Pins (Engineering)
,
Silicon
,
Steel
Magnetic Bearing for Reaction Wheels in Space Applications
WTC 2005; 935-936https://doi.org/10.1115/WTC2005-63910
Topics:
Magnetic bearings
,
Torque
,
Wheels
Some Numerical Simulations and an Experimental Investigation of a Finger Seal
WTC 2005; 937-938https://doi.org/10.1115/WTC2005-63916
Topics:
Computer simulation
,
Deformation
,
Equipment performance
,
High pressure (Physics)
,
Laminates
,
Pressure
,
Pressure drop
,
Rotation
,
Rotors
,
Sealing (Process)
Reducing Wear of Abrasive Wheels Grinding Aerospace Alloys by Laser Assisted Cleaning
WTC 2005; 939-940https://doi.org/10.1115/WTC2005-63923
Topics:
Aerospace industry
,
Alloys
,
Grinding
,
Grinding wheels
,
Lasers
,
Wear
,
Wheels
,
Carbon dioxide lasers
,
Evaporation
,
Irradiation (Radiation exposure)
Effect of Aging on Wear Life of Sputtered MoS2 Films
WTC 2005; 941https://doi.org/10.1115/WTC2005-63944
Topics:
Wear
,
Vacuum
,
Disks
,
Stainless steel
,
Storage
,
Temperature
,
Tribology
Effect of Test Environment on Lifetime of a Vacuum Lubricant
WTC 2005; 943-944https://doi.org/10.1115/WTC2005-63982
Topics:
Lubricants
,
Vacuum
,
Bearings
,
Nitrogen
,
Water vapor
,
Boundary lubrication
,
Chemistry
,
Failure
,
Oxygen
,
Rolling contact
Formation Mechanisms of Tribo-Coating for Low Friction in UHV
WTC 2005; 947-948https://doi.org/10.1115/WTC2005-64274
Topics:
Coating processes
,
Coatings
,
Friction
,
Lubricants
,
Composite materials
,
Diluents
,
Evaporation
,
Lubrication
,
Metals
,
Nanocomposites