Skip Nav Destination
Proceedings Papers
World Tribology Congress III, Volume 1
Keynote Papers
The Challenges of Sliding Wear
WTC 2005; 3-4https://doi.org/10.1115/WTC2005-64231
Topics:
Wear
,
Adhesion
,
Deformation
,
Delamination
,
Die cutting
,
Engineering simulation
,
Fatigue
,
Flow (Dynamics)
,
Fluids
,
Molecular dynamics
The Role of Particle Motion in Abrasive and Erosive Wear
WTC 2005; 5-6https://doi.org/10.1115/WTC2005-64273
Topics:
Particulate matter
,
Wear
,
Abrasion
,
Wear testing
,
Abrasives
,
Erosion
,
Microscale devices
,
Rotation
,
Rubber
,
Sands
Wear of and Fatigue of Materials
Wear Rate of Aluminum Alloys Reinforced by Means of Dispersed Intermetallic Compound Fe-Cr Under Dry Friction
WTC 2005; 23-24https://doi.org/10.1115/WTC2005-63062
Topics:
Aluminum alloys
,
Dry friction
,
Intermetallic compounds
,
Wear
,
Ferrochromium
,
Aluminum
,
Casting
,
Composite materials
,
Particle size
Tribological Properties of Crystalline Hardcoat on Aluminum
WTC 2005; 29-30https://doi.org/10.1115/WTC2005-63084
Topics:
Abrasion
,
Aluminum
,
Erosion
,
Tribology
,
Wear
,
ASTM International
,
Particulate matter
,
Adhesives
,
Ceramic coatings
,
Coatings
Corrosion-Erosion Fatigue of Pipeline Tubes
WTC 2005; 35-36https://doi.org/10.1115/WTC2005-63111
Topics:
Corrosion
,
Erosion
,
Fatigue
,
Pipelines
,
Damage
,
Durability
,
Materials degradation
,
Pressure
,
Reliability
Influence of Particle Content and Porosity on the Dry Sliding Wear Behaviour of Cast In-Situ Al(Ti)-Al2O3(TiO2) Composites
WTC 2005; 65-66https://doi.org/10.1115/WTC2005-63293
Topics:
Composite materials
,
Particulate matter
,
Porosity
,
Wear
,
Alloys
,
Aluminum
,
Stress
,
Titanium
,
Wear testing
,
Aircraft
Role of Misorientation in Assessing Fretting Damage
WTC 2005; 67-68https://doi.org/10.1115/WTC2005-63313
Topics:
Damage
,
Titanium
,
Electron backscatter diffraction
,
Fracture (Materials)
,
Aluminum
,
Copper
,
Cycles
,
Deformation
,
Displacement
,
Grain size
Study on the Wear of Wheel Flange/Rail Gauge Face
WTC 2005; 69-70https://doi.org/10.1115/WTC2005-63318
Topics:
Flanges
,
Gages
,
Rails
,
Wear
,
Wheels
,
Stress
,
Geometry
,
Simulation
,
Finite element methods
,
Finite element model
Experimental Thermal Study of Contact With Third Body
WTC 2005; 75-76https://doi.org/10.1115/WTC2005-63363
Topics:
Heat
,
Heating
,
Microscopes
,
Sapphire
,
Steel
,
Temperature
,
Thermocouples
Wear Behavior of W-DLC Coating Under Reciprocating Sliding Motion
WTC 2005; 77-78https://doi.org/10.1115/WTC2005-63364
Topics:
Coatings
,
Wear
,
Tungsten
,
Diamond films
,
Durability
,
Lubrication
,
Reliability
,
Steel
,
Wear resistance
White Etching Layer and Rolling Contact Fatigue of Rail
WTC 2005; 79-80https://doi.org/10.1115/WTC2005-63366
Topics:
Etching
,
Fatigue
,
Rails
,
Rolling contact
,
Deformation
,
Disks
,
Fracture (Materials)
,
Testing
,
Brittleness
,
Ductility
Wear Properties of Metal-Impregnated Carbon Fiber-Reinforced Carbon Composite Sliding Against a Copper Plate Under an Electric Current
WTC 2005; 85-86https://doi.org/10.1115/WTC2005-63457
Topics:
Carbon
,
Carbon composites
,
Copper
,
Electric current
,
Fibers
,
Metals
,
Wear
,
Composite materials
,
Carbon fibers
,
Electric arcs
Thickness and Distribution of the Transfer Film in Journal Bearing
WTC 2005; 91-92https://doi.org/10.1115/WTC2005-63473
Topics:
Journal bearings
,
Bushings
,
Friction
,
Pressure
,
Steel
,
Temperature
,
Tribology
,
Wear
Effect of Processing Parameters on the Wear Behaviour of Sintered Iron and Steam Oxidized Sintered Iron in Reciprocating Sliding Wear Tests
WTC 2005; 95-96https://doi.org/10.1115/WTC2005-63483
Topics:
Iron
,
Steam
,
Wear
,
Wear testing
,
Oxidation
,
Stress
,
Density
,
Geometry
,
Interferometers
,
Lasers
Modelling the Wear Process of Inhomogeneous Bodies
WTC 2005; 97-98https://doi.org/10.1115/WTC2005-63494
Topics:
Modeling
,
Wear
,
Coating processes
,
Coatings
,
Contact mechanics
,
Density
,
Hardening
Tribological Characterization of Steels for Cutlery: A New Methodology to Access Cutting Edge Sharpness
WTC 2005; 101-102https://doi.org/10.1115/WTC2005-63538
Topics:
Cutting
,
Steel
,
Tribology
,
Stainless steel
,
Wear
,
Deformation
,
Abrasion
,
Friction
,
Heat treating (Metalworking)
,
Scanning electron microscopy
Wear Characteristics of the Sprayed Coatings With Amorphous Material
WTC 2005; 107-108https://doi.org/10.1115/WTC2005-63605
Topics:
Amorphous materials
,
Coatings
,
Wear
,
Blasting
,
Sprays
,
Alloys
,
Erosion
,
Machinery
,
Plasma spraying
,
Porosity
The Effect of Interaction Between Neighboring Asperity Contacts on Wear Mode Transition in Sliding Contact of Rough Surfaces
WTC 2005; 109-110https://doi.org/10.1115/WTC2005-63617
Topics:
Surface roughness
,
Wear
,
Wedges
,
Adhesives
,
Dimensions
,
Finite element methods
,
Finite element model
,
Pressure
Rolling Noise and Wear Mode of Wheel on Railway
WTC 2005; 111-112https://doi.org/10.1115/WTC2005-63635
Topics:
Noise (Sound)
,
Railroads
,
Wear
,
Wheels
,
Surface roughness
,
Rails
,
Brakes
,
Elements
,
Machinery
,
Testing
Friction-Induced Phase Transformations of Cu-Al During Severe Wear
WTC 2005; 119-120https://doi.org/10.1115/WTC2005-63690
Topics:
Friction
,
Phase transitions
,
Wear
,
Atomic force microscopy
,
Atoms
,
Deformation
,
Electron microscopes
,
Hardening
,
Melting
,
Oxidation
Tribological Studies of Compressor Surfaces in the Presence of Carbon Dioxide Under Extreme Environmental Pressure Conditions
WTC 2005; 121-122https://doi.org/10.1115/WTC2005-63731
Topics:
Carbon dioxide
,
Compressors
,
Pressure
,
Tribology
,
Testing
,
High pressure (Physics)
,
Refrigerants
,
Refrigeration
,
Tribometers
Tribological Study of Ti3SiC2 and Its Derivatives
WTC 2005; 123-124https://doi.org/10.1115/WTC2005-63739
Topics:
Tribology
,
Wear
,
Temperature
,
Friction
,
Tribological films
,
Wear resistance
A Retrospective View of Wear Research and Some Emerging Challenges
WTC 2005; 127-128https://doi.org/10.1115/WTC2005-63866
Topics:
Wear
,
Design
,
Coating processes
,
Damage
,
Friction
,
Heat
,
Instrumentation
,
Lubricants
,
Modeling
,
Signals
A Study Into the Parameters Affecting Nickel Oxide Glaze Formation
WTC 2005; 133-135https://doi.org/10.1115/WTC2005-63885
Topics:
Glazes
,
Nickel
,
Damage
,
Temperature
,
Wear
,
Cycles
,
Delays
,
Fatigue life
,
Friction
,
Nickel alloys
Third Body Effects in the Wear of Polyamide Materials
WTC 2005; 139-140https://doi.org/10.1115/WTC2005-63895
Topics:
Wear
,
Displacement
,
Flow (Dynamics)
,
Sapphire
,
Transparency
,
Visualization
,
Wear resistance
Water Lubricated Sliding Wear of Si3N4/BN Fibrous Monoliths
WTC 2005; 141-142https://doi.org/10.1115/WTC2005-63897
Topics:
Water
,
Wear
,
Friction
,
Boron
,
Silicon nitride ceramics
,
Tribology
,
Tribometers
Fundamental Wear Mechanisms on the Nanoscale
WTC 2005; 153-154https://doi.org/10.1115/WTC2005-64004
Topics:
Nanoscale phenomena
,
Wear
,
Deformation
,
Flow (Dynamics)
,
Friction
Rolling Contact Fatigue of Bearing Steel in Hydrogen Environment
WTC 2005; 155-156https://doi.org/10.1115/WTC2005-64037
Topics:
Bearing steel
,
Fatigue
,
Hydrogen
,
Rolling contact
,
Bearings
,
Steel
,
Embrittlement
,
Reliability
,
Renewable energy
,
Safety
Effect of Reciprocal Sliding on Severe-Mild Wear Transition
WTC 2005; 163-164https://doi.org/10.1115/WTC2005-64068
Topics:
Wear
,
Particulate matter
,
Adhesives
,
Stress
,
Temperature
Wear Characteristics of Metals Using Disk on Disk Type Wear Test Rig
WTC 2005; 165-166https://doi.org/10.1115/WTC2005-64069
Topics:
Disks
,
Metals
,
Wear
,
Wear testing
,
Adhesives
,
Particulate matter
,
Symmetry (Physics)
Contact Mechanics and Friction
Adhesive Contact of Bodies Having an Elliptical Contact Area
WTC 2005; 189-190https://doi.org/10.1115/WTC2005-64177
Topics:
Adhesives
,
Adhesion
,
Displacement
,
Microtribology
,
Shapes
,
Solids
,
Stress
Relating Surface Roughness to Subsurface Stress
WTC 2005; 199-200https://doi.org/10.1115/WTC2005-63090
Topics:
Stress
,
Surface roughness
,
Design
,
Materials properties
,
Visualization
Tribo-Electric Behaviors of Copper Under Dry Sliding Against Cu-Cr Alloys
WTC 2005; 203-204https://doi.org/10.1115/WTC2005-63095
Topics:
Alloys
,
Copper
,
Tribology
,
Heat conduction
,
Electric current
,
Density
,
Friction
,
Heat
,
Simulation
Troppy Phenomenon
WTC 2005; 205-206https://doi.org/10.1115/WTC2005-63102
Topics:
Damage
,
Deformation
,
Differential equations
,
Excitation
,
Oscillations
,
Stability
Non-Linear Signal Analysis Applied to Surface Wear Condition Monitoring in Reciprocating Sliding Testing Machines
WTC 2005; 213-214https://doi.org/10.1115/WTC2005-63119
Topics:
Condition monitoring
,
Machinery
,
Signals
,
Testing
,
Wear
,
Friction
,
Dynamic systems
,
Dynamics (Mechanics)
,
Harmonic motion
,
Nonlinear systems
Artificial Neural Network and Genetic Algorithms for Discontinuously Reinforced Aluminum Composites Frictional Behaviour Prediction
WTC 2005; 223-224https://doi.org/10.1115/WTC2005-63159
Topics:
Aluminum
,
Artificial neural networks
,
Composite materials
,
Genetic algorithms
,
Modeling
,
Friction
,
Construction
,
Databases
,
Tribology
A Thermoelastic Investigation of Friction Phenomena
WTC 2005; 231-232https://doi.org/10.1115/WTC2005-63245
Topics:
Friction
,
Thermoelasticity
,
Displacement
,
Stress
,
Modeling
,
Cycles
,
Energy dissipation
,
Fibers
,
Geometry
,
Optical microscopy
A Material Removal Rate Model Considering Interfacial Micro-Contact Wear Behavior for Chemical Mechanical Polishing
WTC 2005; 239-240https://doi.org/10.1115/WTC2005-63260
Topics:
Interface phenomena
,
Polishing
,
Wear
,
Particulate matter
,
Semiconductor wafers
,
Slurries
,
Deformation
,
Particle size
Adhesive Component of Friction Between Rough Surfaces
WTC 2005; 241-242https://doi.org/10.1115/WTC2005-63266
Topics:
Adhesives
,
Friction
,
Surface roughness
,
Adhesion
,
Liquid films
,
Pressure
Friction of Different Surface Layer of Pavements in Contact With a Rubber
WTC 2005; 243-244https://doi.org/10.1115/WTC2005-63269
Topics:
Friction
,
Pavement
,
Rubber
,
Sliding friction
,
Dry friction
,
Oscillations
,
Stick-slip
,
Stiction
,
Stress
The Influence of Residual Stress on Micromachine Stiction of a Stiff Circular Plate
WTC 2005; 247-248https://doi.org/10.1115/WTC2005-63280
Topics:
Stiction
,
Stress
,
Membranes
,
Adhesion
,
Bridges (Structures)
,
Energy budget (Physics)
,
Failure
,
Microelectromechanical systems
,
Stiffness
,
Switches
Finite Element Simulation of Wheel-Rail Contact Dynamic Instabilities Under Sliding Conditions
WTC 2005; 249-250https://doi.org/10.1115/WTC2005-63298
Topics:
Finite element analysis
,
Rails
,
Simulation
,
Wheels
,
Friction
,
Coulombs
,
Dynamic response
,
Finite element methods
,
Modal analysis
,
Rotating disks
Tribological Behaviour of GFR Polymer Composites
WTC 2005; 257-258https://doi.org/10.1115/WTC2005-63357
Topics:
Composite materials
,
Polymer composites
,
Tribology
Thermo-Electro-Mechanical Simulation of Aluminum-Steel Imperfect Electrical Contact With Extremely High Interfacial Temperature
WTC 2005; 259-260https://doi.org/10.1115/WTC2005-63369
Topics:
Aluminum
,
Simulation
,
Steel
,
Temperature
,
Boundary-value problems
,
Fast Fourier transforms
,
Algorithms
,
Displacement
,
Frequency response
,
Pressure
An Improved Fractal Contact Model With Special Emphasis on Surface Roughness, Elastoplastic Transition Deformation Zone, and Hardness Effects of Coating Film
WTC 2005; 267-268https://doi.org/10.1115/WTC2005-63418
Topics:
Coating processes
,
Coatings
,
Deformation
,
Fractals
,
Surface roughness
,
Contact mechanics
,
Dimensions
Wear and Friction Behavior of the Aerospace Bearing Steel M50 and a Nitrogen-Alloyed Stainless Steel Under Lubricated Sliding Conditions
WTC 2005; 279-280https://doi.org/10.1115/WTC2005-63444
Topics:
Aerospace industry
,
Bearing steel
,
Friction
,
Nitrogen
,
Stainless steel
,
Wear
,
Temperature
,
Lubricants
,
Disks
,
Bearings
Effects of Boundary Films on the Frictional Behavior of Rough-Surface Contacts in Incipient Sliding
WTC 2005; 295-296https://doi.org/10.1115/WTC2005-63510
Topics:
Surface roughness
,
Shear strength
,
Pressure
,
Die cutting
,
Shear (Mechanics)
,
Shearing (Deformation)
,
Plasticity
,
Stress
,
Thin films
Complex Micromodel Analysis of Wearing Contact Interfaces
WTC 2005; 301-302https://doi.org/10.1115/WTC2005-63540
Topics:
Design
,
Finite element model
,
Geometry
,
Graphite
,
Heat
,
Lubricants
,
Lubrication
,
Manufacturing
,
Particulate matter
,
Pressure
Mechanics Modeling of Blade/Disk Contacts
WTC 2005; 303-310https://doi.org/10.1115/WTC2005-63545
Topics:
Blades
,
Disks
,
Modeling
,
Stress
,
Fatigue
,
Finite element analysis
,
Gas turbines
,
Geometry
,
Integral equations
,
Tangential loading
A Multi-Scale Model for Contact Between Rough Surfaces
WTC 2005; 313-314https://doi.org/10.1115/WTC2005-63565
Topics:
Surface roughness
,
Deformation
,
Fractals
,
Density
,
Modeling
,
Stress
The Characteristic Fractal Parameter for the Characterization of Rough Surfaces
WTC 2005; 331-332https://doi.org/10.1115/WTC2005-63643
Topics:
Fractals
,
Surface roughness
,
Dimensions
,
Geometry
,
Grinding
,
Machining
,
Milling
,
Polishing
First Observation of Elastic Plowing in Nanofriction
WTC 2005; 339-340https://doi.org/10.1115/WTC2005-63713
Topics:
Design
,
Friction
,
Instrumentation
,
Nanoscale phenomena
,
Shapes
,
Stress
Contact Stiffness of New and Worn Surfaces
WTC 2005; 341-342https://doi.org/10.1115/WTC2005-63727
Topics:
Stiffness
,
Surface roughness
,
Particulate matter
,
Wear
,
Pressure
,
Computer simulation
,
Fracture (Materials)
,
Glazes
,
Resonance
,
Steel
Adhesion, Friction and Mechanical Properties of CF3- and CH3-Terminated Alkanethiol Monolayers: A Comparative Study
WTC 2005; 345-346https://doi.org/10.1115/WTC2005-63769
Topics:
Adhesion
,
Friction
,
Mechanical properties
,
Atomic force microscopy
,
Microelectromechanical systems
,
Adhesives
,
Atomic size
,
Crystals
,
Lubricants
,
Microscopy
Thermal Elasto-Plastic Contact Model of Rough Surfaces
WTC 2005; 353-354https://doi.org/10.1115/WTC2005-63810
Topics:
Surface roughness
,
Cylinders
,
Deformation
,
Heat
,
Heating
,
Pressure
,
Steady state
,
Stress
,
Temperature
,
Temperature effects
Intelligent Modeling of Contact Mechanics and Friction Dynamics
WTC 2005; 367-368https://doi.org/10.1115/WTC2005-63903
Topics:
Contact mechanics
,
Dynamics (Mechanics)
,
Friction
,
Modeling
,
Adhesion
,
Wear
,
Dynamic modeling
,
Dynamic models
,
Erosion
,
Maintenance
The Stress-Dependence of Phase Changes in Silicon Under Indentation
WTC 2005; 369-370https://doi.org/10.1115/WTC2005-63908
Topics:
Phase transitions
,
Silicon
,
Stress
,
Cycles
,
Deformation
,
Hydrostatics
,
Shapes
,
Water
Contact Problems and Nanoindentation Tests for Indenters of Non-Ideal Shapes and Effects of Molecular Adhesion
WTC 2005; 371-372https://doi.org/10.1115/WTC2005-63912
Topics:
Adhesion
,
Contact mechanics
,
Nanoindentation
,
Shapes
,
Adhesives
,
Geometry
,
Accounting
,
Boundary-value problems
,
Displacement
,
Elastic moduli
Contact Analysis of Multilayered Elastic/Plastic Solids With Rough Surfaces for Decreasing Friction and Wear
WTC 2005; 377-378https://doi.org/10.1115/WTC2005-63942
Topics:
Friction
,
Solids
,
Surface roughness
,
Wear
,
Displacement
,
Stiffness
,
Stress
,
Engineering simulation
,
Fast Fourier transforms
,
Pressure
Anisotropic Friction in Cold Rolling of Flat Steel Strips
WTC 2005; 383-384https://doi.org/10.1115/WTC2005-63986
Topics:
Anisotropy
,
Cold rolling
,
Friction
,
Steel
,
Strips
,
Actuators
,
Computer simulation
,
Dimensions
,
Grinding
,
Surface roughness
Tribology of PFPE Overcoated Self-Assembled Monolayers Deposited on Silicon Surface: Effect of Thermal Treatment
WTC 2005; 401-402https://doi.org/10.1115/WTC2005-64067
Topics:
Self-assembly
,
Silicon
,
Tribology
,
Wear
,
Durability
,
Friction
,
Tribometers
,
Bonding
,
Chemical properties
,
Coating processes
Models of Friction and Wear of DLC Films
WTC 2005; 403-404https://doi.org/10.1115/WTC2005-64085
Topics:
Diamond films
,
Friction
,
Wear
,
Atoms
,
Carbon
,
Coatings
,
Oxygen
,
Abrasion
,
Cycles
,
Desorption
Finite Element Analysis of Ceramic Coating Systems Under Spherical Indentation With Metallic Interlayer: Part I — Uncracked Coatings
WTC 2005; 413-414https://doi.org/10.1115/WTC2005-64209
Topics:
Ceramic coatings
,
Coatings
,
Finite element analysis
,
Damage
,
Aluminum alloys
,
Carbon steel
,
Elastic moduli
,
Modeling
,
Stress
,
Stress concentration
The Surface Buckling in Static and Dynamic Rough Contact of Solids
WTC 2005; 417-418https://doi.org/10.1115/WTC2005-64233
Topics:
Buckling
,
Solids
,
Surface roughness
,
Rotation
,
Shear (Mechanics)
,
Compression
,
Friction
,
Shapes
,
Stiction
Lubrication and Lubricants
Synthetic Lubricants Based on Sebacic Complex Esters
WTC 2005; 425-426https://doi.org/10.1115/WTC2005-63049
Topics:
Ester
,
Synthetic lubricants
,
Ethanol
,
Ethyl compounds
,
Oils
,
Petroleum
,
Symmetry (Physics)
,
Tribology
Effective Tribology Testing of Lubricating Oils
WTC 2005; 429-430https://doi.org/10.1115/WTC2005-63078
Topics:
Lubricating oils
,
Testing
,
Tribology
,
Wear
,
Friction
,
Oils
,
Petroleum
,
Stress
,
Acoustic emissions
,
Dynamics (Mechanics)
Plastic Deformations of Micro-Spheres by Solidified Lubricants and Lubricants’ Shear Stress Under Very High Pressure
WTC 2005; 431-432https://doi.org/10.1115/WTC2005-63099
Topics:
Deformation
,
High pressure (Physics)
,
Lubricants
,
Shear stress
,
Pressure
,
Traction
,
Diamonds
,
Dimensions
,
Ester
,
Hydrostatics
Variable Timestepping in EHD Problems
WTC 2005; 435-436https://doi.org/10.1115/WTC2005-63116
Topics:
Automotive engines
,
Errors
,
Linear systems
,
Machine components
,
Simulation
,
Transients (Dynamics)
The New Lubrication Technology and China’s Sustained Development
WTC 2005; 439https://doi.org/10.1115/WTC2005-63123
Topics:
Lubrication
,
Petroleum
,
Lubricants
,
China
,
Automobiles
,
Lubricating oils
,
Machinery
,
Crude oil
,
Economics
,
Engines
Application of Acoustic Emission for High-Pressure Short Time Solidification of Traction Fluids
WTC 2005; 443-444https://doi.org/10.1115/WTC2005-63168
Topics:
Acoustic emissions
,
Fluids
,
High pressure (Physics)
,
Solidification
,
Traction
,
Lubricating oils
,
Collisions (Physics)
,
Impact testing
,
Oils
,
Petroleum
Static and Kinetic Friction of Smooth Glass Surfaces Rubbed With Silicone Oils
WTC 2005; 445-446https://doi.org/10.1115/WTC2005-63174
Topics:
Glass
,
Oils
,
Petroleum
,
Silicones
,
Sliding friction
,
Viscosity
,
Relaxation (Physics)
,
Stiction
,
Cycles
,
Fluids
Flash Temperature Parameter Number Prediction Model by Design of Tribological Experiments for Basestock Mineral Oil Containing Palm Olein and Aminephosphate Additives
WTC 2005; 451-452https://doi.org/10.1115/WTC2005-63193
Topics:
Design
,
Mineral oil
,
Temperature
,
Tribology
,
Wear
,
Lubricants
,
Lubrication
,
Machinery
,
Response surface methodology
,
Stress
Prediction of Wear Rate Dispersion in Mixed Lubrication
WTC 2005; 453-454https://doi.org/10.1115/WTC2005-63212
Topics:
Lubrication
,
Wear
,
Friction
,
Boundary lubrication
,
Lubricants
,
Tribology
EHD Contacts in Low-Amplitude Oscillatory Motion
WTC 2005; 455-456https://doi.org/10.1115/WTC2005-63226
Topics:
Couplings
,
Interferometry
,
Lubricants
,
Machine components
,
Splines
,
Stress
High Pressure Lubricant Property Measurements
WTC 2005; 461-462https://doi.org/10.1115/WTC2005-63329
Topics:
Compression
,
Gases
,
High pressure (Physics)
,
Lubricants
,
Shear stress
,
Solidification
A Constant Temperature FZG Test for Open Gear Lubricants
WTC 2005; 465-466https://doi.org/10.1115/WTC2005-63333
Topics:
Gears
,
Lubricants
,
Temperature
,
Stress
,
Cooling
,
Engines
,
Fluids
,
Friction
,
Heat
,
Heat exchangers
Sunflower Based Grease for Heavy Duty Applications
WTC 2005; 481-482https://doi.org/10.1115/WTC2005-63484
Topics:
Bushings
,
Gears
,
Lubricants
,
Minerals
,
Polymers
,
Thickening agents
,
Trenching machinery
,
Tribology
High Oleic Plant Oils With Hydroxy Fatty Acids for Emission Reduction
WTC 2005; 485-486https://doi.org/10.1115/WTC2005-63515
Topics:
Emissions
,
Petroleum
,
Vegetable oils
,
Lubricants
,
Biotechnology
,
Engines
,
Feedstock
,
Genetic engineering
,
Pipes
,
Polymers
Disk-Like Compounds Showing Low Traction Coefficient Under EHL Contacts
WTC 2005; 493-494https://doi.org/10.1115/WTC2005-63580
Topics:
Disks
,
Traction
,
Liquid crystals
,
Friction
,
Pressure
,
Temperature
,
Temperature effects
,
Wear
Lubricity Synergism in Boundary Lubrication
WTC 2005; 503-504https://doi.org/10.1115/WTC2005-63687
Topics:
Boundary lubrication
,
Fuels
,
Diesel engines
,
Lubricants
,
Pumps
,
Viscosity
,
Ethers (Class of compounds)
,
Lubrication
,
Phase transition temperature
,
Wear
Some Analytical Approximations and Numerical Solutions of EHL Problems for Non-Newtonian Fluids Fatigue
WTC 2005; 507https://doi.org/10.1115/WTC2005-63720
Topics:
Approximation
,
Boundary-value problems
,
Fatigue
,
Film thickness
,
Lubricants
,
Lubrication
,
Nonlinear equations
,
Non-Newtonian fluids
,
Pressure
,
Rheology
Two-Phase Hydrodynamic Modeling of Particulate Fluids in Sliding Contacts
WTC 2005; 511-512https://doi.org/10.1115/WTC2005-63778
Topics:
Fluids
,
Modeling
,
Particulate matter
,
Semiconductor wafers
,
Slurries
,
Polishing
,
Wear
,
Manufacturing
,
Pressing
Coconut Oil as Bio Lubricant: Study of the Anti-Wear Properties Using Quantum Chemical Calculations and Tribological Tests
WTC 2005; 513-514https://doi.org/10.1115/WTC2005-63786
Topics:
Lubricants
,
Tribology
,
Wear
,
Molecular orbitals
,
ASTM International
,
Carbon
,
Chain
,
Computer software
,
Iron
,
Molecular dynamics
New Estimations of Surface Properties for Tribological Studies by Neutron Reflectometry
Tomoko Hirayama, Hiroki Takemoto, Kazuko Inoue, Toru Ebisawa, Seiji Tasaki, Masahiro Hino, Naoya Torikai, Hirohiko Shimizu, Kazuaki Ikeda
WTC 2005; 517-518https://doi.org/10.1115/WTC2005-63797
Topics:
Neutrons
,
Surface properties
,
Tribology
,
Metals
,
Metal surfaces
,
Cathode ray oscilloscopes
,
Electron beams
,
Film thickness
,
Lubricants
,
Neutron beams
Lubrication With Water-Based Clay Suspensions
WTC 2005; 529-530https://doi.org/10.1115/WTC2005-63835
Topics:
Lubrication
,
Water
,
Fluids
,
Stress
,
Friction
,
Rheology
,
Boundary lubrication
,
Disks
,
Drill strings
,
Drilling
Frictional Behavior and Tribo-Carbonization of a Synthetic Engine Oil (SJ/CF/5W-30) With Different Tribo-Materials Under Stepwise Heating Conditions
WTC 2005; 533-534https://doi.org/10.1115/WTC2005-63847
Topics:
Engines
,
Heating
,
Coating processes
,
Coatings
,
Cast iron
,
Friction
,
Operating temperature
,
Raman spectroscopy
,
Tribotesters
The Effect of Diesel Engine Oil Contamination on Friction and Wear
P. Ramkumar, L. Wang, T. J. Harvey, R. J. K. Wood, K. Nelson, E. Yamaguchi, J. J. Harrison, H. E. G. Powrie
WTC 2005; 537-538https://doi.org/10.1115/WTC2005-63854
Topics:
Contamination
,
Diesel engines
,
Friction
,
Wear
,
Condition monitoring
,
Oils
,
Oxidation
,
Petroleum
,
Soot
Experimental and Numerical Study of Emulsion Lubricated Strip Rolling
WTC 2005; 549-550https://doi.org/10.1115/WTC2005-64020
Topics:
Emulsions
,
Strips
,
Film thickness
,
Lubricants
,
Pressure
,
Cold rolling
,
Drops
,
Lubrication
The Influence of Surface Roughness on Elastohydrodynamic Journal Bearing With Non-Newtonian Lubricants
WTC 2005; 551-552https://doi.org/10.1115/WTC2005-64046
Topics:
Journal bearings
,
Lubricants
,
Surface roughness
,
Bearings
,
Deformation
,
Stress
,
Elasticity
,
Elastohydrodynamic lubrication
,
Film thickness
,
Friction
Development of Low Phosphorous Engine Oils
WTC 2005; 557-558https://doi.org/10.1115/WTC2005-64078
Topics:
Engines
,
Oils
,
Petroleum
,
Wear
,
Emissions
,
Temperature
,
Tribology
,
Weight (Mass)
,
Boundary-value problems
,
Catalytic converters
Development and Evaluation of a High Performance Universal Grease
WTC 2005; 559-560https://doi.org/10.1115/WTC2005-64079
Topics:
Automotive industry
,
Aviation
,
Catalysts
,
Cylinders
,
Durability
,
Friction
,
Lithium
,
Low temperature
,
Metal surfaces
,
Molybdenum
A Theory of Cavitation in an Oscillatory Oil Squeeze Film
WTC 2005; 573-574https://doi.org/10.1115/WTC2005-64159
Topics:
Cavitation
,
Bearings
,
Pressure
,
Air entrainment
,
Plates (structures)
,
Stress
,
Surface tension
,
Tension
,
Vapor pressure
Shear Cavitation
WTC 2005; 577-578https://doi.org/10.1115/WTC2005-64168
Topics:
Cavitation
,
Shear (Mechanics)
,
Stress
,
Flow (Dynamics)
,
Pressure
,
Bubbles
,
Computer simulation
,
Errors
,
Failure
,
Gases
Soft EHL Lubrication of Complex Multiphase Fluids
WTC 2005; 589-590https://doi.org/10.1115/WTC2005-64272
Topics:
Fluids
,
Lubrication
,
Emulsions
,
Elastomers
,
Friction
,
Rheology
,
Steel
,
Viscosity
,
Water
Random Surface Roughness Effects in Microasperity Lubrication
WTC 2005; 593-594https://doi.org/10.1115/WTC2005-64298
Topics:
Lubrication
,
Surface roughness
,
Pressure
,
Bearings
,
Cavities
,
Leakage
,
Stress
,
Thrust
Heat Transfer Properties of Engine Oils
WTC 2005; 595-596https://doi.org/10.1115/WTC2005-64316
Topics:
Engines
,
Heat transfer
,
Oils
,
Petroleum
,
Specific heat
,
Thermal conductivity
,
Diesel engines
,
Fluids
,
Heat
,
Lubricants
Additives and Tribochemistry
Antiwear Chemistry in Presence of ZDDP
WTC 2005; 599-600https://doi.org/10.1115/WTC2005-63960
Topics:
Chemistry
,
Wear
,
Tribological films
,
Adhesives
,
Mechanical properties
,
Metal surfaces
,
Boundary lubrication
,
Chemical reactions
,
Equilibrium (Physics)
,
Metals
Tribochemistry of Materials
WTC 2005; 603-604https://doi.org/10.1115/WTC2005-64399
Topics:
Tribochemistry
,
Chemistry
,
Atoms
,
Carbon films
,
Lubricants
,
Lubrication
,
Semiconductors (Materials)
,
Steel
,
Technology development
Neat Ionic Liquids and Additives in Lubrication of Steel-Aluminum
WTC 2005; 605-606https://doi.org/10.1115/WTC2005-63120
Topics:
Aluminum
,
Lubrication
,
Steel
Carbon Nanotubes and Onions as Lubricant Additives
WTC 2005; 611-612https://doi.org/10.1115/WTC2005-63220
Topics:
Carbon nanotubes
,
Lubricants
,
Nanoparticles
,
Friction
,
Nanotubes
,
Wear
,
Tribology
,
Carbon
,
Fullerenes
,
Graphite
Inorganic Fullerene-Like Nanoparticles as New Lubricant Additives: A Drug Delivery Mechanism
WTC 2005; 613-614https://doi.org/10.1115/WTC2005-63221
Topics:
Drug delivery systems
,
Fullerenes
,
Lubricants
,
Nanoparticles
,
Friction
,
Pressure
,
Boundary lubrication
,
Chemical reactions
,
Low temperature
,
Lubrication
Nano-Objects and Their Influence on Properties of Motor Oils
WTC 2005; 615-616https://doi.org/10.1115/WTC2005-63224
Topics:
Engines
,
Motors
,
Oils
,
Petroleum
,
Particulate matter
Tribofilms Generated From ZDDP and DDP on Steel Surfaces: Part 1 — Growth, Wear and Morphology
WTC 2005; 617-618https://doi.org/10.1115/WTC2005-63246
Topics:
Steel
,
Tribological films
,
Wear
,
Atomic force microscopy
,
Chemistry
,
Photoelectron spectroscopy
,
Spectroscopy
,
X-ray absorption
,
X-rays
Opportunities for Replacement of Phosphorus and Dithiophosphates in Lubricating Oil With Borate Ester Additive Containing Nitrogen
WTC 2005; 623-624https://doi.org/10.1115/WTC2005-63348
Topics:
Ester
,
Lubricating oils
,
Nitrogen
,
Wear
,
Catalysts
,
Exhaust systems
,
Oils
,
Petroleum
,
Stress
,
Tribology
Tribomechanical-Chemical Effects and Visualisation of Additive’s Layer Formation in Engine Crankcase Oil Between Sliding Pairs
WTC 2005; 637-645https://doi.org/10.1115/WTC2005-63509
Topics:
Engines
,
Temperature
,
Visualization
,
Steel
,
Chemical reactions
,
Electron microscopes
,
Lubricants
,
Mechanical properties
,
Sapphire
,
Wear
Oxidation Chemistry of Primary and Secondary Antioxidants
WTC 2005; 647-648https://doi.org/10.1115/WTC2005-63592
Topics:
Chemistry
,
Oxidation
,
Temperature
,
Combustion
,
Heating
,
Flow (Dynamics)
,
Heat
,
Pressure
,
Oxygen
,
Boundary lubrication
Comparison of Aluminum Cold Strip Rolling Lubricant Additives
WTC 2005; 649-650https://doi.org/10.1115/WTC2005-63650
Topics:
Aluminum
,
Cold rolling
,
Lubricants
,
Boundary lubrication
,
Compression
,
Lubrication
,
Plane strain
,
Rolling mills
,
Strips
Molecular Mechanisms of Anti-Wear Pad Formation and Functionality
WTC 2005; 655-656https://doi.org/10.1115/WTC2005-63954
Topics:
Wear
,
Atoms
,
Design
,
Lubricants
,
Molecular dynamics simulation
,
Pressure
ZDDP-Additive-Catalyst Interactions in Engine Oil
WTC 2005; 661-662https://doi.org/10.1115/WTC2005-64075
Topics:
Catalysts
,
Engines
,
Wear
,
Iron
,
Oils
,
Petroleum
,
Automobiles
,
Catalytic converters
,
Cylinders
,
Detergents
A Very Effective Stabilizer for Perfluoropolyether Lubricants
WTC 2005; 663-664https://doi.org/10.1115/WTC2005-64186
Topics:
Lubricants
,
Oils
,
Petroleum
,
Absorption
,
Chemistry
,
High temperature
,
Metals
,
Probes
,
Reflection
,
Spectroscopy
Friction-Induced Change of Boron Hybridization in Lubricant Additives
WTC 2005; 665-666https://doi.org/10.1115/WTC2005-64188
Topics:
Boron
,
Friction
,
Lubricants
,
Tribological films
,
Spectroscopy
,
Wear
,
Detergents
,
Electrons
,
Machinery
,
Molybdenum
Tribology Testing of Advanced Aviation Oils, Bearing and Gear Materials
WTC 2005; 673-674https://doi.org/10.1115/WTC2005-64296
Topics:
Aviation
,
Bearings
,
Gears
,
Oils
,
Petroleum
,
Testing
,
Tribology
,
Bearing steel
,
Boundary lubrication
,
Stainless steel
Magnetic Storage Systems
Stiffness and Damping of Molecularly Thin PFPE Lubricant Bridging Between Magnetic Disk and Diamond Probe Tip
WTC 2005; 679-680https://doi.org/10.1115/WTC2005-63058
Topics:
Damping
,
Diamonds
,
Disks
,
Lubricants
,
Probes
,
Stiffness
,
Bridges (Structures)
,
Elastic constants
,
Elongation
,
Regression analysis
Meniscus Adhesion at Ultra-Low Flying Slider-Disk Interfaces
WTC 2005; 683-684https://doi.org/10.1115/WTC2005-63180
Topics:
Adhesion
,
Disks
,
Adhesives
,
Air bearings
,
Bearings
,
Dynamics (Mechanics)
,
Engineering simulation
,
Simulation
Experimental Study of High-Speed Contact at Head-Disk Interface in a Magnetic Hard Disk
WTC 2005; 689-690https://doi.org/10.1115/WTC2005-63285
Topics:
Disks
,
Acoustic emissions
,
Lubricants
,
Calibration
,
Carbon
,
Deformation
,
Durability
,
Emission spectroscopy
,
Fracture (Materials)
,
Fracture (Process)
Thickness and Processing Effects on the Composition and Actuating Force of Pb(Zr,Ti)O3 Thin-Film Micro-Actuator for Hard Disk Drives
WTC 2005; 691-692https://doi.org/10.1115/WTC2005-63316
Topics:
Disks
,
Microactuators
,
Thin films
,
Zirconium
,
Actuators
,
Augers
,
Density
,
Electron spectroscopy
,
Engines
,
Integrated circuits
Stability and Dynamics of Non-Linear Slider Behaviour Due to Disk Waviness in the Presence of Intermolecular and Electrostatic Forces
WTC 2005; 699-700https://doi.org/10.1115/WTC2005-63384
Topics:
Disks
,
Dynamics (Mechanics)
,
Stability
,
Air bearings
,
Damping
,
Stiffness
,
Resonance
,
Equations of motion
Improved Analysis of Unstable Bouncing Vibration and Stabilizing Design of Flying Slider in Near-Contact Regime
WTC 2005; 713-714https://doi.org/10.1115/WTC2005-63612
Topics:
Design
,
Vibration
,
Stiffness
,
Air bearings
,
Adhesion
,
Adhesives
,
Design methodology
,
Disks
,
Dynamics (Mechanics)
,
Surface roughness
Deformation and Stability Analysis of Ultra-Thin Lubricant Films by the Long Wave Equation: Analysis Considering the van der Waals Force and Gas Pressure at the Liquid Surface
WTC 2005; 719-720https://doi.org/10.1115/WTC2005-63629
Topics:
Deformation
,
Lubricants
,
Pressure
,
Stability
,
Van der Waals forces
,
Wave equations
,
Liquid films
,
Lubrication theory
,
Shapes
,
Surface tension
Modeling Airflow and Particle Trajectories Near the Head/Disk Interface Region of a Small Form Factor Hard Disk Drive Enclosure
WTC 2005; 721-729https://doi.org/10.1115/WTC2005-63633
Topics:
Air flow
,
Disks
,
Modeling
,
Particulate matter
,
Horizontal directional drilling
,
Flow (Dynamics)
,
Design
,
Filters
,
Gravity (Force)
,
Navier-Stokes equations
A Scanning Method to Study the Influence of Roughness, Microwaviness, and Lubricant Thickness Variation on Slider Dynamics
WTC 2005; 735-736https://doi.org/10.1115/WTC2005-63682
Topics:
Acoustic emission testing
,
Acoustic emissions
,
Disks
,
Displacement
,
Dynamics (Mechanics)
,
Lasers
,
Lubricants
,
Poles (Building)
,
Surface roughness
,
Transducers
Simulation of In-Plane Transverse Displacement of Tape
WTC 2005; 749-750https://doi.org/10.1115/WTC2005-63824
Topics:
Displacement
,
Simulation
,
Tension
,
Equations of motion
,
Stiffness
,
Cable reels
,
Computer simulation
,
Strips
Modeling of Acoustic Wave Propagation HAMR Media
WTC 2005; 757-758https://doi.org/10.1115/WTC2005-63913
Topics:
Acoustics
,
Modeling
,
Wave propagation
,
Waves
,
Reflectance
,
Finite element methods
,
Solids
,
Thermoelasticity
,
Composite materials
,
Computer simulation
Optimization of Air Bearing Slider Design
WTC 2005; 765-769https://doi.org/10.1115/WTC2005-64176
Topics:
Air bearings
,
Design
,
Optimization
,
Algorithms
,
Disks
,
Simulated annealing
,
Data storage systems
,
Density
,
Geometry
Pressure in Ultra Thin Perfluoropolyether Film
WTC 2005; 773-774https://doi.org/10.1115/WTC2005-64257
Topics:
Pressure
,
Density
,
Solids
,
Atomic structure
,
Engineering simulation
,
Lennard-Jones potential
,
Liquid films
,
Shapes
,
Simulation
,
Symmetry (Physics)
Numerical Simulation and Experimental Study on the Effect of Ramp Profile, Friction and Flex-Cable Force on the L/UL Process for Small Form Factor HDD
Kyoung-Su Park, Jung-Il Chun, Moon-Gyo Jung, Yonghyun Lee, No-Cheol Park, Hyun-Seok Yang, Young-Pil Park
WTC 2005; 781-782https://doi.org/10.1115/WTC2005-64389
Comparisons of Friction Characteristics of a Lightly Loaded Pin Sliding Over Magnetic Disks Coated With Polar and Non-Polar PFPE Lubricants
WTC 2005; 795-796https://doi.org/10.1115/WTC2005-64395
Topics:
Disks
,
Friction
,
Lubricants
,
Carbon
,
Diamonds
,
Film thickness
,
Glass
,
Molecular weight
,
Rotating disks
Manufacturing Processes
Direct Observations of Emulsion Flow in EHL Contacts
WTC 2005; 799-800https://doi.org/10.1115/WTC2005-63074
Topics:
Emulsions
,
Flow (Dynamics)
,
Water
Investigation of Liquid Nitrogen Lubrication Effect in Cryogenic Machining
WTC 2005; 801-802https://doi.org/10.1115/WTC2005-63089
Topics:
Lubrication
,
Machining
,
Nitrogen
,
Friction
,
Disks
,
Low temperature
,
Carbon steel
,
Coolants
,
Cooling
,
Cutting
Deep Rolling Efficiently Increases Fatigue Life
WTC 2005; 803-804https://doi.org/10.1115/WTC2005-63093
Topics:
Fatigue life
,
Alloy steel
,
Aluminum
,
Brass (Metal)
,
Compressive stress
,
Corrosion
,
Design
,
Fatigue strength
,
Magnesium (Metal)
,
Manufacturing
Emulsion for Single Phase Alpha-Brass in Hot Rolling Process: Case Study
WTC 2005; 805-806https://doi.org/10.1115/WTC2005-63133
Topics:
Brass (Metal)
,
Emulsions
,
Hot rolling
,
Rollers
,
ASTM International
,
Wear
,
Galling
,
Lubrication
,
Copper
,
Friction
Effects of Solid Lubricants During Compression Tests
WTC 2005; 809-810https://doi.org/10.1115/WTC2005-63138
Topics:
Compression
,
Lubricants
,
Dry friction
,
Engines
,
Motors
,
Silicon
,
Sprays
,
Deformation
,
Finite element analysis
,
Forging
An Investigation on Machining Behaviour of Metal Matrix Composites by Using PCD Inserts
WTC 2005; 811-812https://doi.org/10.1115/WTC2005-63152
Topics:
Machining
,
Metal matrix composites
,
Wear
,
Alloys
,
Cutting
,
Cutting tools
,
Diamonds
,
Machine tools
,
Scanning electron microscopes
,
Surface roughness
Ceramic Rolls for Wires, Tubes and Sheets
WTC 2005; 815-816https://doi.org/10.1115/WTC2005-63267
Topics:
Ceramics
,
Metalworking
,
Wire
,
Friction
,
Product quality
,
Silicon nitride ceramics
,
Steel
,
Wear
,
Wear resistance
Simulation of the Tribological System in Sheet Metal Processes on the Micro Scale
WTC 2005; 821-822https://doi.org/10.1115/WTC2005-63548
Topics:
Sheet metal
,
Simulation
,
Tribology
,
Darcy's law
,
Deformation
,
Finite element methods
,
Lubricants
,
Microscale devices
,
Pressure
,
Texture (Materials)
A Method to Predict Temperature Fields During Frictional Welding by Introducing the Heat Input Coefficient and the Heat Input Surface Transfer
WTC 2005; 823-824https://doi.org/10.1115/WTC2005-63639
Topics:
Friction welding
,
Heat
,
Temperature
,
Stainless steel
,
Welding
,
Sliding friction
,
Stators
Dry Machinability of Aluminum Alloys
WTC 2005; 831-832https://doi.org/10.1115/WTC2005-64098
Topics:
Aluminum alloys
,
Coatings
,
Cutting
,
Cutting tools
,
Fluids
,
Machinability
,
Machining
,
Finishes
,
Wear
,
Aluminum
Studies of Machining Parameters of Al Alloy A-390 During Turning
WTC 2005; 833-834https://doi.org/10.1115/WTC2005-64128
Topics:
Aluminum alloys
,
Cutting
,
Machinability
,
Machining
,
Temperature
,
Turning
,
Alloys
,
Casting
,
Economics
,
Energy consumption
Effects of Asperity Shape on the Tribological Behaviour During Stamping of Zinc Coated Steel Sheets for Car Bodies
WTC 2005; 835-836https://doi.org/10.1115/WTC2005-64129
Topics:
Metal stamping
,
Shapes
,
Steel sheet
,
Tribology
,
Friction
,
Fracture (Materials)
,
Fracture (Process)
,
Lubricants
,
Surface roughness
,
Boundary lubrication
Vortex-Tube Cooling for Tool Wear Reduction in A390 Dry Machining
WTC 2005; 837-838https://doi.org/10.1115/WTC2005-64166
Topics:
Cooling
,
Machining
,
Vortices
,
Wear
,
Temperature
,
Alloys
,
Cutting
,
Air jets
,
Aluminum
,
Convection
Multi-Scale Study of Abrasion Signature by 2D Wavelet Decomposition
WTC 2005; 839-840https://doi.org/10.1115/WTC2005-64215
Topics:
Abrasion
,
Wavelets
,
Finishing
,
Machining
,
Transfer functions
,
Wavelength
,
Wavelet transforms
,
Wear
Evaluation of Rheological Properties of Magnetorheological Polishing Fluid and Their Effect on Surface Finish in Ultra Precision Finishing Processes
WTC 2005; 843-844https://doi.org/10.1115/WTC2005-64260
Topics:
Finishes
,
Finishing
,
Fluids
,
Polishing
,
Rheology
,
Particulate matter
,
Particle size
,
Bonding
,
Flow (Dynamics)
,
Iron
Tribological Investigation of the Polymer-Based Lubrication System With Micropores Used in a Manufacturing Transfer Line
WTC 2005; 845-846https://doi.org/10.1115/WTC2005-64277
Topics:
Industrial lubrication systems
,
Manufacturing
,
Polymers
,
Tribology
,
Contamination
,
Coolants
,
Experimental design
,
Hazards
,
Leakage
,
Lubricants
The Influence of Friction Stability on the Success of Lubricated Stamping Operations: Predictive Tools From Plane Friction Tests
WTC 2005; 847-848https://doi.org/10.1115/WTC2005-64278
Topics:
Friction
,
Metal stamping
,
Stability
,
Galling
,
Risk
,
Boundary lubrication
,
Failure
,
Fracture (Materials)
,
Fracture (Process)
,
Lubricants
Manufacturing Tribology in the Nano-Manufacturing Era
WTC 2005; 855-856https://doi.org/10.1115/WTC2005-64345
Topics:
Manufacturing
,
Molecular dynamics
,
Nanomanufacturing
,
Tribology
,
Wear
,
Friction
,
Grinding
,
Lubrication
,
Polishing
,
Drilling
General
Influence of Test Conditions on Tribological Behavior
WTC 2005; 859-860https://doi.org/10.1115/WTC2005-63101
Topics:
Tribology
,
Wear
,
Stress
,
Friction
,
ASTM International
,
Lubricants
,
Machinery
,
Oscillations
,
Statistical analysis
Correlation Study of Functional Surface Parameters Based on Micro-Contact Analyses
WTC 2005; 863-864https://doi.org/10.1115/WTC2005-63275
Topics:
Finishes
,
Friction
,
Heat
,
Lubricants
,
Pressure
,
Surface roughness
,
Wear
Experimental Investigation of Drillpipe Loaded in Slips
WTC 2005; 865-866https://doi.org/10.1115/WTC2005-63324
Topics:
Design
,
Drill strings
,
Gulf of Mexico
,
Knudsen number
,
Ocean engineering
,
Strain gages
,
Stress
,
String
,
Wedges
Granular Flow Lubrication: A Lattice-Based Cellular Automata Modeling Approach
WTC 2005; 881-882https://doi.org/10.1115/WTC2005-63703
Topics:
Flow (Dynamics)
,
Lubrication
,
Modeling
,
Fluids
,
Lubricants
,
Particulate matter
,
Engineering simulation
,
Mathematics
,
Nanoscale phenomena
,
Shear (Mechanics)
Effects of Contact Load on Fretting Wear of Al-Si Alloy Impregnated Graphite Composite
WTC 2005; 883-884https://doi.org/10.1115/WTC2005-63726
Topics:
Alloys
,
Composite materials
,
Graphite
,
Stress
,
Wear
,
Friction
,
Bearing steel
,
Disks
,
Heat
,
Journal bearings
Approaches to Dynamic Tribosystem Modelling
WTC 2005; 885-886https://doi.org/10.1115/WTC2005-63771
Topics:
Computer software
,
Design
,
Engineering design processes
,
Friction
,
Machinery
,
Modeling
,
Tribology
,
Wear
Numerical Modeling of Surface Temperature Rising on Imperfect Sliding Electrical Contact
WTC 2005; 889-890https://doi.org/10.1115/WTC2005-64142
Topics:
Computer simulation
,
Temperature
,
Surface roughness
,
Heating
,
Joules
,
Contact resistance
,
Electric current
,
Fast Fourier transforms
,
Flux (Metallurgy)
,
Heat
Advances in Nonlinear Rotordynamics of Passenger Vehicle Turbochargers: A Virtual Laboratory Anchored to Test Data
WTC 2005; 891-892https://doi.org/10.1115/WTC2005-64155
Topics:
Rotordynamics
,
Turbochargers
,
Vehicles
,
Bearings
,
Design
,
Computer software
,
Cycles
,
Dynamic response
,
Engines
,
Internal combustion engines
Modeling Tribological Impact on Overall System Dynamics
WTC 2005; 893-895https://doi.org/10.1115/WTC2005-64201
Topics:
Modeling
,
System dynamics
,
Tribology
,
Bearings
,
Design
,
Dynamics (Mechanics)
,
Geometry
,
Lubricants
,
Stress
,
Differential equations
Simulation of Space Shuttle Gear Performance
WTC 2005; 897-898https://doi.org/10.1115/WTC2005-64297
Topics:
Gears
,
Simulation
,
Brakes
,
Damage
,
Torque
,
Transients (Dynamics)
,
Wear
Dynamics of Bearing Shaft Systems
WTC 2005; 901-902https://doi.org/10.1115/WTC2005-64331
Topics:
Bearings
,
Dynamics (Mechanics)
,
Rolling bearings
,
Stress
,
Gears
,
Stability
Multibody Rolling Bearing Calculations: Computer Program BEAST
WTC 2005; 903-904https://doi.org/10.1115/WTC2005-64337
Topics:
Computer software
,
Rolling bearings
,
Bearings
,
Modeling
,
Heat
,
Jet engines
,
Simulation
,
Tribology
Wet Versus Dry Friction
WTC 2005; 905-906https://doi.org/10.1115/WTC2005-64361
Topics:
Adhesion
,
Automobiles
,
Biological cells
,
Dry friction
,
Dynamics (Mechanics)
,
Friction
,
Rubber
,
Soil
,
Wetting
Student Poster Program
Tribological Performance Prediction Using an Artificial Neural Network Optimized by the DIRECT Algorithm
WTC 2005; 911-912https://doi.org/10.1115/WTC2005-63413
Topics:
Algorithms
,
Artificial neural networks
,
Tribology
,
Optimization
,
Computation
,
Computer simulation
,
Design
,
Engineering simulation
,
Fluid films
,
Modeling
Tribochemical Polishing of Aluminum Oxide in the Atmosphere of CHF3
WTC 2005; 921-922https://doi.org/10.1115/WTC2005-64041
Topics:
Aluminum
,
Critical heat flux
,
Heart failure
,
Polishing
,
Ceramics
,
Disks
,
Friction
,
Glass
,
Lubricants
,
Thermal stability
Investigation of Tribological Mechanism of Near Dry Machining (NDM)
WTC 2005; 927-928https://doi.org/10.1115/WTC2005-64181
Topics:
Machining
,
Tribology
,
Oxygen
,
Gases
,
Lubricants
,
Lubrication
,
Nitrogen
,
Steel
Vapor Phase Lubricant Adsorption on Magnetic Data Storage Media
WTC 2005; 929-930https://doi.org/10.1115/WTC2005-64341
Topics:
Data storage systems
,
Lubricants
,
Vapors
,
Lubrication
,
Carbon
,
Contamination
,
Disks
,
Manufacturing
,
Oxidation
,
Vacuum
Effects of Contact Modes on Wear of Railroad
WTC 2005; 937-938https://doi.org/10.1115/WTC2005-64356
Topics:
Railroads
,
Wear
,
Friction
,
Rails
,
Roads
,
Scanning electron microscopes
,
Sodium
,
Steel
,
Surface characterization
,
Tribometers
How Piezoelectric Actuators Can Improve Dry Friction
WTC 2005; 945-946https://doi.org/10.1115/WTC2005-64368
Topics:
Dry friction
,
Piezoelectric actuators
,
Actuators
,
Friction
,
Displacement
,
Excitation
,
Forging
,
Lubrication
,
Metals
,
Piezoelectric materials
Study of Small-Scale Friction at Elevated Temperatures
WTC 2005; 949-950https://doi.org/10.1115/WTC2005-64371
Topics:
Friction
,
Temperature
,
Carbon steel
,
High temperature
,
Steel
Lubricant Degradation Studies Using a Single Cylinder Research Engine
P. M. Lee, M. Priest, M. S. Stark, J. J. Wilkinson, J. R. Lindsay Smith, R. Gamble, C. J. Hammond, R. I. Taylor, S. Chung
WTC 2005; 953-954https://doi.org/10.1115/WTC2005-64373
Topics:
Cylinders
,
Engines
,
Lubricants
,
Tribology
,
Fuel consumption
,
Manufacturing
,
Oils
,
Petroleum
,
Pistons
,
Pressure
Tribological Investigation of Porcine Articular Cartilage
WTC 2005; 959-960https://doi.org/10.1115/WTC2005-64382
Topics:
Cartilage
,
Tribology
,
Elastic moduli
,
Fluids
,
Friction
,
Pressure
,
Bulk solids
,
Steady state