The concept of SHM is that a sensing system on the structure monitors the system responses and notifies the owner about the condition of the structure. The aim of this paper is to propose an inexpensive SHM method employing low-cost sensors to monitor the railroad bridges. Traditional monitoring systems can have limitations regarding the deployment of wired sensors due to their high cost. In this paper, the utilization of low-cost sensors for live load monitoring of railroad bridges is explored. In this study an Arduino microcontroller along with an inexpensive accelerometer manufactured by Analog Devices were used as test platform. In order to determine the ability of the low-cost accelerometer to assess the condition of a vibrating structure, the sensor system was attached to an actuator simulating bridge vibrations and different types of frequencies and amplitudes were tested. The values obtained with the Arduino microcontroller are very similar to the commercial accelerometer while being 60 times cheaper, which shows the potential of investing on low-cost instrumentation for inexpensive monitoring of railroad bridges. The findings of this research indicate that low-cost sensors can be effectively utilized for structural health monitoring of railroad bridges.
Skip Nav Destination
ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems
September 28–30, 2016
Stowe, Vermont, USA
Conference Sponsors:
- Aerospace Division
ISBN:
978-0-7918-5048-0
PROCEEDINGS PAPER
Application of Low-Cost Sensors for Estimation of Reference-Free Displacements Under Dynamic Loading for Railroad Bridges Safety
Jose A. Gomez,
Jose A. Gomez
University of New Mexico, Albuquerque, NM
Search for other works by this author on:
Ali I. Ozdagli,
Ali I. Ozdagli
University of New Mexico, Albuquerque, NM
Search for other works by this author on:
Fernando Moreu
Fernando Moreu
University of New Mexico, Albuquerque, NM
Search for other works by this author on:
Jose A. Gomez
University of New Mexico, Albuquerque, NM
Ali I. Ozdagli
University of New Mexico, Albuquerque, NM
Fernando Moreu
University of New Mexico, Albuquerque, NM
Paper No:
SMASIS2016-9294, V001T05A021; 11 pages
Published Online:
November 29, 2016
Citation
Gomez, JA, Ozdagli, AI, & Moreu, F. "Application of Low-Cost Sensors for Estimation of Reference-Free Displacements Under Dynamic Loading for Railroad Bridges Safety." Proceedings of the ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. Volume 1: Multifunctional Materials; Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Structural Health Monitoring. Stowe, Vermont, USA. September 28–30, 2016. V001T05A021. ASME. https://doi.org/10.1115/SMASIS2016-9294
Download citation file:
32
Views
Related Proceedings Papers
Related Articles
A State Space Formulation for Moving Loads Identification
J. Vib. Acoust (August,2006)
A New Low-Frequency Resonance Sensor for Low Speed Roller Bearing Monitoring
J. Vib. Acoust (February,2010)
Optimal Control of Beams With Dynamic Loading and Buckling
J. Appl. Mech (March,1991)
Related Chapters
Introduction
Computer Vision for Structural Dynamics and Health Monitoring
Achievements, Challenges, and Opportunities
Computer Vision for Structural Dynamics and Health Monitoring
Research of One Loose-Coupling Distributed Bridges Health Monitoring System
International Conference on Advanced Computer Theory and Engineering (ICACTE 2009)