Researchers have attempted to model the magneto-mechanical behavior of magnetic shape memory alloys (MSMAs) for over a decade, but all of the models developed to date have only been validated against experimental data generated under two-dimensional loading conditions. As efforts have been underway to develop models able to predict the most general (i.e. 3D) loading conditions for the material, there is a need for experimental data to support the calibration and validation of these models. This paper presents magneto-mechanical data from experiments where a MSMA specimen whose microstructure accommodates three martensite variants is subjected to three-dimensional magneto-mechanical loading. To the best of our knowledge, all prior experimental investigations on MSMA have been performed on samples accommodating two martensite variants and exposed to two-dimensional magneto-mechanical loads. The experimental results from the 3D loading of the three variant MSMA specimen are used to calibrate and validate a 3D model developed by this group [LaMaster et al. (2014)]. This model assumes that three martensite variants coexist in the material. The LaMaster et al. model captures the general trends seen in the experimental data, but does not predict the data with a high degree of accuracy. Possible reasons for the mismatch between experimental data and model predictions are discussed.
- Aerospace Division
Experimental Investigation and Model Predictions of a NiMnGa Alloy’s Response to Three Dimensional Magneto-Mechanical Loading
- Views Icon Views
- Share Icon Share
- Search Site
Dikes, JL, Feigenbaum, HP, Ciocanel, C, & Guiel, R. "Experimental Investigation and Model Predictions of a NiMnGa Alloy’s Response to Three Dimensional Magneto-Mechanical Loading." Proceedings of the ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. Volume 1: Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. Colorado Springs, Colorado, USA. September 21–23, 2015. V001T02A011. ASME. https://doi.org/10.1115/SMASIS2015-9076
Download citation file: