Numerous vibrating electromechanical systems miss a rigid connection to the inertial frame. An artificial inertial frame can be generated by a shaker which compensates for vibrations. In this paper we present an encapsulated and perforated unimorph bending plate for this purpose. As basis for system simulation and optimization a new 3-port multi domain network model was derived. An extension of the network allows the simulation of the acoustical behavior inside the capsule. Network parameters are determined using Finite Element simulations. The dynamic behavior of the network model agrees with the Finite Element simulation results up to the first resonance of the system. The network model was verified by measurements on a laboratory setup, too.
Skip Nav Destination
ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems
September 19–21, 2012
Stone Mountain, Georgia, USA
Conference Sponsors:
- Aerospace Division
ISBN:
978-0-7918-4509-7
PROCEEDINGS PAPER
Piezoelectric Two Layer Plate for Position Stabilization
Martin Krause,
Martin Krause
Technische Universität Dresden, Dresden, Germany
Search for other works by this author on:
Daniel Steinert,
Daniel Steinert
Technische Universität Dresden, Dresden, Germany
Search for other works by this author on:
Eric Starke,
Eric Starke
Technische Universität Dresden, Dresden, Germany
Search for other works by this author on:
Uwe Marschner,
Uwe Marschner
Technische Universität Dresden, Dresden, Germany
Search for other works by this author on:
Günther Pfeifer,
Günther Pfeifer
Technische Universität Dresden, Dresden, Germany
Search for other works by this author on:
Wolf-Joachim Fischer
Wolf-Joachim Fischer
Technische Universität Dresden, Dresden, Germany
Search for other works by this author on:
Martin Krause
Technische Universität Dresden, Dresden, Germany
Daniel Steinert
Technische Universität Dresden, Dresden, Germany
Eric Starke
Technische Universität Dresden, Dresden, Germany
Uwe Marschner
Technische Universität Dresden, Dresden, Germany
Günther Pfeifer
Technische Universität Dresden, Dresden, Germany
Wolf-Joachim Fischer
Technische Universität Dresden, Dresden, Germany
Paper No:
SMASIS2012-8230, pp. 559-563; 5 pages
Published Online:
July 24, 2013
Citation
Krause, M, Steinert, D, Starke, E, Marschner, U, Pfeifer, G, & Fischer, W. "Piezoelectric Two Layer Plate for Position Stabilization." Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Structural Health Monitoring. Stone Mountain, Georgia, USA. September 19–21, 2012. pp. 559-563. ASME. https://doi.org/10.1115/SMASIS2012-8230
Download citation file:
7
Views
Related Proceedings Papers
Related Articles
Structural Dynamics Analysis of Three-Dimensional Bi-Axial Sun-Tracking System Structure Determined by Numerical Modal Analysis
J. Sol. Energy Eng (June,2018)
Insight Into the Interaction Between Flow Field and Acoustic Field of Turning Flow Into a Side Branch Against a Deadleg
J. Fluids Eng (June,2022)
Reduced Model and Application of Inflating Circular Diaphragm Dielectric Elastomer Generators for Wave Energy Harvesting
J. Vib. Acoust (February,2015)
Related Chapters
Occlusion Identification and Relief within Branched Structures
Biomedical Applications of Vibration and Acoustics in Therapy, Bioeffect and Modeling
IEL: A New Localization Algorithm for Wireless Sensor Network
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Simulation on Vibration Radiation Noise from Rear Driving Axle of Minibus Based on Virtual Lab Acoustics
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)