Volumes | Smart Materials, Adaptive Structures and Intelligent Systems | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems

Development and Characterization of Multifunctional Materials

Active Thermal Management of FRP Composites via Embedded Vascular Networks

Jim Cole, Ian Bond, Andrew Lawrie

SMASIS 2019; V001T01A001https://doi.org/10.1115/SMASIS2019-5555

Abstract

View Articletitled, Active Thermal Management of FRP Composites via Embedded Vascular Networks

PDF

Topics: Composite materials , Fiber reinforced plastics , Thermal management , Thermomechanics , Temperature , Coolants , Equipment performance , Bending (Stress) , Carbon , Cooling

Surface Bonding Graphene-Based Elastomeric Sensor: Preliminary Characterization of Adhesion Strength

Salvatore Ameduri, Monica Ciminello

SMASIS 2019; V001T01A002https://doi.org/10.1115/SMASIS2019-5578

Abstract

View Articletitled, Surface Bonding Graphene-Based Elastomeric Sensor: Preliminary Characterization of Adhesion Strength

PDF

Topics: Adhesion , Bonding , Graphene , Sensors

Erratum: “Surface Bonding Graphene-Based Elastomeric Sensor: Preliminary Characterization of Adhesion Strength” [ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Louisville, Kentucky, USA, September 9–11, 2019, Conference Sponsors: Aerospace Division, ISBN: 978-0-7918-5913-1, Copyright © 2019 by ASME. Paper No. SMASIS2019-5578, pp. V001T01A002; 7 pages; doi: 10.1115/SMASIS2019-5578]

Salvatore Ameduri, Monica Ciminello

SMASIS 2019; V001T01A002ehttps://doi.org/10.1115/SMASIS2019-5578e

Abstract

View Articletitled, Erratum: “Surface Bonding Graphene-Based Elastomeric Sensor: Preliminary Characterization of Adhesion Strength” [ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Louisville, Kentucky, USA, September 9–11, 2019, Conference Sponsors: Aerospace Division, ISBN: 978-0-7918-5913-1, Copyright © 2019 by ASME. Paper No. SMASIS2019-5578, pp. V001T01A002; 7 pages; doi: 10.1115/SMASIS2019-5578]

PDF

Topics: Adaptive structures , Adhesion , Aerospace industry , Bonding , Graphene , Sensors , Smart materials , Errors

4D Printed Shape Memory Polymer Composite Structures for Deployable Small Spacecrafts

Madhubhashitha Herath, Mainul Islam, Jayantha Epaarachchi, Fenghua Zhang, Jinsong Leng

SMASIS 2019; V001T01A003https://doi.org/10.1115/SMASIS2019-5583

Abstract

View Articletitled, 4D Printed Shape Memory Polymer Composite Structures for Deployable Small Spacecrafts

PDF

Topics: Composite materials , Printing , Shape memory polymers , Space vehicles

Full-Field Deformation and Thermal Characterization of GNP/Epoxy and GNP/SMA Fiber/Epoxy Composites

Ugur Kilic, Muhammad M. Sherif, Sherif M. Daghash, Osman E. Ozbulut

SMASIS 2019; V001T01A004https://doi.org/10.1115/SMASIS2019-5640

Abstract

View Articletitled, Full-Field Deformation and Thermal Characterization of GNP/Epoxy and GNP/SMA Fiber/Epoxy Composites

PDF

Topics: Composite materials , Deformation , Epoxy adhesives , Epoxy resins , Fibers , Graphene , Thermal characterization

Self-Sensing Characterization of GNP and Carbon Black Filled Cementitious Composites

Zhangfan Jiang, Osman E. Ozbulut, Guohua Xing

SMASIS 2019; V001T01A005https://doi.org/10.1115/SMASIS2019-5653

Abstract

View Articletitled, Self-Sensing Characterization of GNP and Carbon Black Filled Cementitious Composites

PDF

Topics: Carbon black pigments , Composite materials , Nanomaterials , Damage , Sensors , Cements (Adhesives) , Concretes , Mortar , Strain gages , Accelerometers

Experimental Investigation on the Cyclic Compression Behavior of Superelastic NiTi SMA Bars

Amedebrhan M. Asfaw, Guohua Xing, Osman E. Ozbulut

SMASIS 2019; V001T01A006https://doi.org/10.1115/SMASIS2019-5654

Abstract

View Articletitled, Experimental Investigation on the Cyclic Compression Behavior of Superelastic NiTi SMA Bars

PDF

Topics: Buckling , Compression , Nickel titanium alloys , Shape memory alloys

Nanocomposite Coating for Strain Monitoring

Erika Magnafico, Francesco Poli, Arnaldo Casalotti, Giulia Lanzara

SMASIS 2019; V001T01A007https://doi.org/10.1115/SMASIS2019-5682

Abstract

View Articletitled, Nanocomposite Coating for Strain Monitoring

PDF

Topics: Carbon nanotubes , Coating processes , Coatings , Nanocomposites

Self-Sensing Composite Materials With Intelligent Fabrics

Federico Fabriani, Giulia Lanzara

SMASIS 2019; V001T01A008https://doi.org/10.1115/SMASIS2019-5684

Abstract

View Articletitled, Self-Sensing Composite Materials With Intelligent Fabrics

PDF

Topics: Composite materials , Fibers , Textiles , Structural health monitoring , Electrospinning , Glass fibers , Sensors , Vibration , Workability

Experimental Studies of the Actuation of Carbon Nanotube-Based Materials

Sebastian Geier, Thorsten Mahrholz, Peter Wierach, Michael Sinapius

SMASIS 2019; V001T01A009https://doi.org/10.1115/SMASIS2019-5685

Abstract

View Articletitled, Experimental Studies of the Actuation of Carbon Nanotube-Based Materials

PDF

Topics: Carbon , Carbon nanotubes , Diffusion (Physics) , Nanotubes , Actuators , Dimensions , Electric fields , Electrolytes , Elongation , Ions

Ultra-Long Nanocomposite Wire Ropes

Marco Marini, Michela Talò, Giulia Lanzara, Walter Lacarbonara

SMASIS 2019; V001T01A010https://doi.org/10.1115/SMASIS2019-5688

Abstract

View Articletitled, Ultra-Long Nanocomposite Wire Ropes

PDF

Topics: Nanocomposites , Ropes , Wire , Carbon nanotubes , Polymers , Polymer nanocomposites , Weight (Mass) , Damping , Extruding , Fibers

Direct Printing of a Flexible Strain Sensor for Distributed Monitoring of Deformation in Inflatable Structures

Mohammed Al-Rubaiai, Ryohei Tsuruta, Taewoo Nam, Umesh Gandhi, Xiaobo Tan

SMASIS 2019; V001T01A011https://doi.org/10.1115/SMASIS2019-5713

Abstract

View Articletitled, Direct Printing of a Flexible Strain Sensor for Distributed Monitoring of Deformation in Inflatable Structures

PDF

Topics: Air-supported structures , Deformation , Printing , Strain sensors , Sensors , Additive manufacturing , Structural health monitoring , Textiles , Damage , Design

Mechanics and Behavior of Active Materials

Transduction Using Functional Materials: Basic Science and Understanding at the U. S. Naval Research Laboratory

Virginia G. DeGiorgi, Peter Finkel, Lauren Garten, Margo Staruch

SMASIS 2019; V001T02A001https://doi.org/10.1115/SMASIS2019-5501

Abstract

View Articletitled, Transduction Using Functional Materials: Basic Science and Understanding at the U. S. Naval Research Laboratory

PDF

Topics: Advanced materials , Composite materials , Crystals , Design , Energy harvesting , Functional materials , Magnetic fields , Manufacturing , Multifunctional materials , Phase transitions

Feedback Control of SMA-Wires for Position Determination: A Comparison of the Behavior Under Vacuum and Standard Conditions

Robin Roj, Peter Dültgen, Florian Schummer, Sven Langbein

SMASIS 2019; V001T02A002https://doi.org/10.1115/SMASIS2019-5503

Abstract

View Articletitled, Feedback Control of SMA-Wires for Position Determination: A Comparison of the Behavior Under Vacuum and Standard Conditions

PDF

Topics: Actuators , Fatigue , Feedback , Vacuum , Wire

Investigation of the Lifetime of Antagonistic Shape Memory Wires With Focus on Accelerated Resetting

Antonia Weirich, Benedict Theren, Dennis Otibar, Bernd Kuhlenkötter

SMASIS 2019; V001T02A003https://doi.org/10.1115/SMASIS2019-5511

Abstract

View Articletitled, Investigation of the Lifetime of Antagonistic Shape Memory Wires With Focus on Accelerated Resetting

PDF

Topics: Actuators , Shapes , Wire

Investigation of the Fatigue Strength of Shape Memory Wires With Different Diameters

Dennis Otibar, Benedict Theren, Antonia Weirich, Bernd Kuhlenkötter, Haang Wai Tung

SMASIS 2019; V001T02A004https://doi.org/10.1115/SMASIS2019-5512

Abstract

View Articletitled, Investigation of the Fatigue Strength of Shape Memory Wires With Different Diameters

PDF

Topics: Actuators , Experimental design , Fatigue strength , Shapes , Wire

Methodology for Minimizing Operational Influences of the Test Rig During Long-Term Investigations of SMA Wires

Benedict Theren, Dennis Otibar, Antonia Weirich, Julius Brandenburg, Bernd Kuhlenkötter

SMASIS 2019; V001T02A005https://doi.org/10.1115/SMASIS2019-5513

Abstract

View Articletitled, Methodology for Minimizing Operational Influences of the Test Rig During Long-Term Investigations of SMA Wires

PDF

Topics: Actuators , Experimental design , Fatigue , Fatigue testing , Manufacturing systems , Reliability , Shapes , Stress , Testing equipment , Wear

Finite Element-Based Numerical Investigations of a Beamlike Actuator Combining Shape Memory and Superelastic Effects

Danillo C. Reis, Domingos A. Rade, Osmar S. Santos

SMASIS 2019; V001T02A006https://doi.org/10.1115/SMASIS2019-5546

Abstract

View Articletitled, Finite Element-Based Numerical Investigations of a Beamlike Actuator Combining Shape Memory and Superelastic Effects

PDF

Topics: Actuators , Shapes , Design , Displacement , Accounting , Cantilever beams , Computer simulation , Computer software , Dimensions , Engineering simulation

Mechanics of Post Constrained Recovery Residual Stress Produced by NiTi

Muhammad Istiaque Haider, Armin Yazdi, Maysam Rezaee, Li Chih Tsai, Nathan Salowitz

SMASIS 2019; V001T02A007https://doi.org/10.1115/SMASIS2019-5619

Abstract

View Articletitled, Mechanics of Post Constrained Recovery Residual Stress Produced by NiTi

PDF

Topics: Nickel titanium alloys , Stress , Cycles , Thermomechanics , Fatigue , Grain boundaries , Heat , Low temperature , Nickel , Potential energy

Woven Nitinol Fabric Strips Characterized in Tension via Finite Element Analysis and Geometric Modeling

Amanda Skalitzky, Caleb Petersen, Austin Gurley, David Beale

SMASIS 2019; V001T02A008https://doi.org/10.1115/SMASIS2019-5669

Abstract

View Articletitled, Woven Nitinol Fabric Strips Characterized in Tension via Finite Element Analysis and Geometric Modeling

PDF

Topics: Finite element analysis , Geometric modeling , Nickel titanium alloys , Strips , Tension , Textiles , Wire , Temperature , Design , Differential scanning calorimetry

Dynamic Response of an Electrospun PVDF-Fe₃O₄ Piezoelectric Composite Microfiber

Krishna Chytanya Chinnam, Arnaldo Casalotti, Giulia Lanzara

SMASIS 2019; V001T02A009https://doi.org/10.1115/SMASIS2019-5686

Abstract

View Articletitled, Dynamic Response of an Electrospun PVDF-Fe<sub>3</sub>O<sub>4</sub> Piezoelectric Composite Microfiber

PDF

Topics: Composite materials , Dynamic response , Fibers , Polyester fibers

Experimental Technique to Estimate Interfacial Properties of Mechanoluminescent Particles in an Elastomer Matrix

Srivatsava Krishnan, Noriko Katsube, Vishnu baba Sundaresan

SMASIS 2019; V001T02A010https://doi.org/10.1115/SMASIS2019-5691

Abstract

View Articletitled, Experimental Technique to Estimate Interfacial Properties of Mechanoluminescent Particles in an Elastomer Matrix

PDF

Topics: Composite materials , Elastomers , Modeling , Particulate matter , Stress

Coupled Electro-Thermo-Mechanical Modeling of Shape Memory Polymers

Midhan Siwakoti, Russell W. Mailen

SMASIS 2019; V001T02A011https://doi.org/10.1115/SMASIS2019-5693

Abstract

View Articletitled, Coupled Electro-Thermo-Mechanical Modeling of Shape Memory Polymers

PDF

Topics: Modeling , Shape memory polymers , Shapes , Materials properties , Aerospace industry , Density , Design , Electrical conductivity , Finite element analysis , Polymer composites

Phase Inversion of Complex Fluids With Implications to Drilling Fluids

Gilles Numkam, Babak Akbari

SMASIS 2019; V001T02A012https://doi.org/10.1115/SMASIS2019-5715

Abstract

View Articletitled, Phase Inversion of Complex Fluids With Implications to Drilling Fluids

PDF

Topics: Drilling , Fluids , Ocean engineering

Silicone Material With Enhanced Permittivity Used for Dielectric Elastomer Transducers

Ozan Çabuk, Jürgen Maas

SMASIS 2019; V001T02A013https://doi.org/10.1115/SMASIS2019-5730

Abstract

View Articletitled, Silicone Material With Enhanced Permittivity Used for Dielectric Elastomer Transducers

PDF

Topics: Elastomers , Electrical properties , Silicones , Transducers

Acoustical Behaviour of Buckling Dielectric Elastomer Actuators

Michael Gareis, Jürgen Maas

SMASIS 2019; V001T02A014https://doi.org/10.1115/SMASIS2019-5747

Abstract

View Articletitled, Acoustical Behaviour of Buckling Dielectric Elastomer Actuators

PDF

Topics: Acoustics , Actuators , Buckling , Elastomers , Loudspeakers , Frequency response , Biomimetics , Deflection , Energy / power systems , Hardware

Modeling, Simulation, and Control of Adaptive Systems

On the Design of a Long-Stroke Beam-Based Compliant Mechanism Providing Quasi-Constant Force

Pietro Bilancia, Alessandro Geraci, Giovanni Berselli

SMASIS 2019; V001T03A001https://doi.org/10.1115/SMASIS2019-5519

Abstract

View Articletitled, On the Design of a Long-Stroke Beam-Based Compliant Mechanism Providing Quasi-Constant Force

PDF

Topics: Compliant mechanisms , Design , Deflection , Dimensions , Shapes , Bending (Stress) , Computer software , Control algorithms , Design methodology , Engineering prototypes

Geometrically Nonlinear Vibration Attenuation of Functionally Graded Magneto-Electro-Elastic Shells

Subhaschandra Kattimani, Sharnappa Joladarashi, Vinyas Mahesh

SMASIS 2019; V001T03A002https://doi.org/10.1115/SMASIS2019-5533

Abstract

View Articletitled, Geometrically Nonlinear Vibration Attenuation of Functionally Graded Magneto-Electro-Elastic Shells

PDF

Topics: Active damping , Nonlinear vibration , Shells , Vibration , Composite materials , Finite element model , Materials properties , Piezoelectric materials , Shear deformation , Vibration control

A High-Fidelity Dynamic Model for Origami Based on Iso-Parametric Absolute Nodal Coordinate Formulation (Iso-ANCF)

Jiayue Tao, Suyi Li

SMASIS 2019; V001T03A003https://doi.org/10.1115/SMASIS2019-5534

Abstract

View Articletitled, A High-Fidelity Dynamic Model for Origami Based on Iso-Parametric Absolute Nodal Coordinate Formulation (Iso-ANCF)

PDF

Topics: Analytical methods , Deformation , Design , Dynamic models , Dynamic response , Dynamics (Mechanics) , Engineering simulation , Engineering systems and industry applications , Finite element analysis , Hinges

Control of Brake Squeal Using Shunted Piezoelectric Pads

Yaqoub Abdullah, Amr Baz

SMASIS 2019; V001T03A004https://doi.org/10.1115/SMASIS2019-5548

Abstract

View Articletitled, Control of Brake Squeal Using Shunted Piezoelectric Pads

PDF

Topics: Brakes

Multifunctional Structures for Attitude Control

Vedant, James T. Allison

SMASIS 2019; V001T03A005https://doi.org/10.1115/SMASIS2019-5565

Abstract

View Articletitled, Multifunctional Structures for Attitude Control

PDF

Topics: Actuators , Control systems , Design , Displacement , Engineering systems and industry applications , Jitter , Momentum , Reliability , Satellites , Solar cell arrays

Numerical Analysis and Experimental Verification of Synchronized Switching Damping Systems

Fengling Zhang, Lin Li, Yu Fan, Jiuzhou Liu

SMASIS 2019; V001T03A006https://doi.org/10.1115/SMASIS2019-5570

Abstract

View Articletitled, Numerical Analysis and Experimental Verification of Synchronized Switching Damping Systems

PDF

Topics: Damping , Numerical analysis , Circuits , Dampers , Analog circuits , Dynamic analysis , Frequency response , Nonlinear vibration , Shapes , Switches

Nonreciprocal Wave Transmission in Metastable Modular Metastructures Utilizing Asymmetric Dual-Threshold Snap-Through

Xiang Liu, Guoping Cai, K. W. Wang

SMASIS 2019; V001T03A007https://doi.org/10.1115/SMASIS2019-5572

Abstract

View Articletitled, Nonreciprocal Wave Transmission in Metastable Modular Metastructures Utilizing Asymmetric Dual-Threshold Snap-Through

PDF

Topics: Waves

An FE Based Surrogate Model for Predicting the Impact of a SMA Twist System on the Helicopter Performance

Salvatore Ameduri, Antonio Concilio, Rohin Kumar Majeti

SMASIS 2019; V001T03A008https://doi.org/10.1115/SMASIS2019-5574

Abstract

View Articletitled, An FE Based Surrogate Model for Predicting the Impact of a SMA Twist System on the Helicopter Performance

PDF

Topics: Actuators , Blades , Deformation , Phase transitions , Shape memory alloys

Description of a Hydrogel-Based Micro-Valve As a Library Element for Matlab Simulink

Philipp J. Mehner, Anthony Beck, Mathias Busek, Andreas Voigt, Uwe Marschner, Andreas Richter

SMASIS 2019; V001T03A009https://doi.org/10.1115/SMASIS2019-5614

Abstract

View Articletitled, Description of a Hydrogel-Based Micro-Valve As a Library Element for Matlab Simulink

PDF

Topics: Hydrogels , Matlab , Valves , Equilibrium (Physics) , Fluid structure interaction , Pressure , Chemical reactions , Design , Differential equations , Diffusion (Physics)

Ultrasonic De-Icing System for Leading Edge in Composite Material

Leandro Maio, Salvatore Ameduri, Vittorio Memmolo, Fabrizio Ricci, Antonio Concilio

SMASIS 2019; V001T03A010https://doi.org/10.1115/SMASIS2019-5627

Abstract

View Articletitled, Ultrasonic De-Icing System for Leading Edge in Composite Material

PDF

Topics: Composite materials , Deicing

Developing a Smart Façade System Controller for Wind-Induced Vibration Mitigation in Tall Buildings

Khalid M. Abdelaziz, Jared D. Hobeck

SMASIS 2019; V001T03A011https://doi.org/10.1115/SMASIS2019-5674

Abstract

View Articletitled, Developing a Smart Façade System Controller for Wind-Induced Vibration Mitigation in Tall Buildings

PDF

Topics: Control equipment , Structures , Vibration , Wind , Airfoils , Plates (structures) , Cycles , Dampers , Fatigue failure , Fatigue life

Investigation of Variable Stiffness Effects on Radial Pulse Measurements Using Magneto-Rheological Elastomers

Kyle Weaver, Dylan Shumway, Tae-Heon Yang, Young-Min Kim, Jeong-Hoi Koo

SMASIS 2019; V001T03A012https://doi.org/10.1115/SMASIS2019-5708

Abstract

View Articletitled, Investigation of Variable Stiffness Effects on Radial Pulse Measurements Using Magneto-Rheological Elastomers

PDF

Topics: Elastomers , Rheology , Stiffness , Skin , Pressure , Biomedicine , Blood , Cardiovascular system , Health care , Magnetic fields

Integrated System Design and Implementation

Soft Morphing Buttons Based on Actuator and Sensor Properties of Shape Memory Alloy Wires

Dominik Scholtes, Yannik Goergen, Paul Motzki, Stefan Seelecke, Philipp Scheiner

SMASIS 2019; V001T04A001https://doi.org/10.1115/SMASIS2019-5504

Abstract

View Articletitled, Soft Morphing Buttons Based on Actuator and Sensor Properties of Shape Memory Alloy Wires

PDF

Topics: Actuators , Sensors , Shape memory alloys , Wire , Textiles , Design , Machinery , Advanced materials , Density , Fibers

Design and Realization of Temperature-Driven Smart Structure Based on Shape Memory Polymer in 4D Printing

Yixiong Feng, Siyuan Zeng, Yicong Gao, Hao Zheng, Hao Qiu, Jianrong Tan

SMASIS 2019; V001T04A002https://doi.org/10.1115/SMASIS2019-5509

Abstract

View Articletitled, Design and Realization of Temperature-Driven Smart Structure Based on Shape Memory Polymer in 4D Printing

PDF

Topics: Adaptive structures , Deformation , Design , Printing , Shape memory polymers , Smart structures , Temperature

Design-Oriented Multifidelity Fluid Simulation Using Machine Learned Fidelity Mapping

Kazuko Fuchi, Eric M. Wolf, David S. Makhija, Nathan A. Wukie, Christopher R. Schrock, Philip S. Beran

SMASIS 2019; V001T04A003https://doi.org/10.1115/SMASIS2019-5515

Abstract

View Articletitled, Design-Oriented Multifidelity Fluid Simulation Using Machine Learned Fidelity Mapping

PDF

Topics: Design , Fluids , Machinery , Simulation , Machine learning , Algorithms , Cylinders , Flow (Dynamics) , Physics , Complex systems

Implementation and Investigation of a Compact, Powerful System for Diagnosis and Control of Shape Memory Alloys in Technical Applications

Max Kaiser, Nils Neblung, Martin Gurka

SMASIS 2019; V001T04A004https://doi.org/10.1115/SMASIS2019-5551

Abstract

View Articletitled, Implementation and Investigation of a Compact, Powerful System for Diagnosis and Control of Shape Memory Alloys in Technical Applications

PDF

Topics: Shape memory alloys , Actuators , Electrical resistance , Control algorithms , Control equipment , Phase transitions , Wire , Control systems , Electronic systems , Fuzzy logic

Transient Fluid-Structure Interaction Analysis of a Solid State Ornithopter Wing

Mohammad Katibeh, Onur Bilgen

SMASIS 2019; V001T04A005https://doi.org/10.1115/SMASIS2019-5557

Abstract

View Articletitled, Transient Fluid-Structure Interaction Analysis of a Solid State Ornithopter Wing

PDF

Topics: Fluid structure interaction , Transients (Dynamics) , Wings , Flight , Fluids , Actuators , Cycles , Geometry , Piezoelectric materials

A Piezocomposite Solid-State Rotor: Theoretical Analysis of Thrust and Efficiency Metrics

Taís Carneiro Ferreira de Castro, Onur Bilgen

SMASIS 2019; V001T04A006https://doi.org/10.1115/SMASIS2019-5558

Abstract

View Articletitled, A Piezocomposite Solid-State Rotor: Theoretical Analysis of Thrust and Efficiency Metrics

PDF

Topics: Rotors , Theoretical analysis , Thrust , Blades , Composite materials , Airfoils , Computer software , Design , Engineering prototypes , Engineering simulation

A Bioinspired Piezocomposite Peristaltic Pump: An Electromechanical Euler-Bernoulli Beam Model and Parametric Analysis

Xin Shan, Onur Bilgen

SMASIS 2019; V001T04A007https://doi.org/10.1115/SMASIS2019-5559

Abstract

View Articletitled, A Bioinspired Piezocomposite Peristaltic Pump: An Electromechanical Euler-Bernoulli Beam Model and Parametric Analysis

PDF

Topics: Biomimetics , Pumps , Actuators , Excitation , Fluids , Propulsion , Propulsion systems , Traveling waves

Modeling and Design of an Experimental Demonstrator of Blade Twist Through the SMA Technology

Salvatore Ameduri, Antonio Concilio, Bernardino Galasso

SMASIS 2019; V001T04A008https://doi.org/10.1115/SMASIS2019-5573

Abstract

View Articletitled, Modeling and Design of an Experimental Demonstrator of Blade Twist Through the SMA Technology

PDF

Topics: Blades , Design , Modeling , Fittings , Shape memory alloys , Simulation , Structural analysis , Torque , Wind tunnels , Wings

Self-Sensing for Twisted String Actuators Using Conductive Supercoiled Polymers

David Bombara, Vasilii Mansurov, Revanth Konda, Steven Fowzer, Jun Zhang

SMASIS 2019; V001T04A009https://doi.org/10.1115/SMASIS2019-5587

Abstract

View Articletitled, Self-Sensing for Twisted String Actuators Using Conductive Supercoiled Polymers

PDF

Topics: Actuators , Polymers , String , Sensors , Engines , Motors , Muscle , Nylon fabrics , Polynomials , Rotation

Integrated Rotor Performance Improvement and Vibration Reduction Using Active Camber Morphing

Sumeet Kumar, Dominik Komp, Manfred Hajek, Jürgen Rauleder

SMASIS 2019; V001T04A010https://doi.org/10.1115/SMASIS2019-5588

Abstract

View Articletitled, Integrated Rotor Performance Improvement and Vibration Reduction Using Active Camber Morphing

PDF

Topics: Rotors , Vibration , Aerodynamics , Airfoils , Blades , Stress , Bone , Control equipment , Deflection , Multibody dynamics

Design, Fabrication, and Testing of Optimized Flexible Cylinders

David Ryan Seifert, Wesley A. Chapkin, Geoffrey Frank, Jeffrey Baur

SMASIS 2019; V001T04A011https://doi.org/10.1115/SMASIS2019-5601

Abstract

View Articletitled, Design, Fabrication, and Testing of Optimized Flexible Cylinders

PDF

Topics: Cylinders , Design , Manufacturing , Testing , Stress , Stiffness , Additive manufacturing , Displacement , Optimization , Rotation

A Variable Camber Piezocomposite Trailing-Edge for Subsonic Aircraft: Multidisciplinary Design Optimization

Cody Wright, Onur Bilgen

SMASIS 2019; V001T04A012https://doi.org/10.1115/SMASIS2019-5604

Abstract

View Articletitled, A Variable Camber Piezocomposite Trailing-Edge for Subsonic Aircraft: Multidisciplinary Design Optimization

PDF

Topics: Aircraft , Design , Optimization , Airfoils , Actuators , Drag (Fluid dynamics) , Genetic algorithms , Wings , Algorithms , Fluid structure interaction

Graph-Based Interpretation of L-System Encodings Toward Aeroelastic Topology Optimization of a Morphing Airfoil in Supersonic Flow

Brent R. Bielefeldt, Darren J. Hartl, Joshua D. Hodson, Gregory W. Reich, Philip S. Beran, Alexander M. Pankonien, Joshua D. Deaton

SMASIS 2019; V001T04A013https://doi.org/10.1115/SMASIS2019-5609

Abstract

View Articletitled, Graph-Based Interpretation of L-System Encodings Toward Aeroelastic Topology Optimization of a Morphing Airfoil in Supersonic Flow

PDF

Topics: Airfoils , Optimization , Supersonic flow , Topology , Design , Actuators , Aircraft , Algorithms , Biomimetics , Spar platforms

Shape Memory Alloys in Continuum and Soft Robotic Applications

Yannik Goergen, Romol Chadda, Rouven Britz, Dominik Scholtes, Nataliya Koev, Paul Motzki, Roland Werthschützky, Mario Kupnik, Stefan Seelecke

SMASIS 2019; V001T04A014https://doi.org/10.1115/SMASIS2019-5610

Abstract

View Articletitled, Shape Memory Alloys in Continuum and Soft Robotic Applications

PDF

Topics: Robotics , Shape memory alloys , Robots , Design , Wire , Actuators , Annulus , Bearings , Dynamics (Mechanics) , Electric motors

Compact Telescopic Morphing Lattice Boom

Ciarán McHale, Robert Telford, Paul M. Weaver

SMASIS 2019; V001T04A015https://doi.org/10.1115/SMASIS2019-5620

Abstract

View Articletitled, Compact Telescopic Morphing Lattice Boom

PDF

Topics: Composite materials , Design , Manufacturing , Packaging

Chord Morphing for Helicopter Rotor Blades

Johannes Riemenschneider, Christoph Balzarek, Berend G. van der Wall, Rohin Kumar Majeti

SMASIS 2019; V001T04A016https://doi.org/10.1115/SMASIS2019-5625

Abstract

View Articletitled, Chord Morphing for Helicopter Rotor Blades

PDF

Topics: Blades , Chords (Trusses) , Rotors

Pneumatic Artificial Muscle Actuators With Integrated Controls for Space Flight Applications

Christopher J. Netwall, James P. Thomas, Michael S. Kubista, Kerry A. Griffith, Christopher Kindle, Jordan Schlater, Joseph T. Hays, Phillip A. Feerst, Norman Wereley

SMASIS 2019; V001T04A017https://doi.org/10.1115/SMASIS2019-5630

Abstract

View Articletitled, Pneumatic Artificial Muscle Actuators With Integrated Controls for Space Flight Applications

PDF

Topics: Actuators , Muscle , Robotics , Space flight

Continuous Operating Elastocaloric Heating and Cooling Device: Air Flow Investigation and Experimental Parameter Study

Susanne-Marie Kirsch, Felix Welsch, Lukas Ehl, Nicolas Michaelis, Paul Motzki, Andreas Schütze, Stefan Seelecke

SMASIS 2019; V001T04A018https://doi.org/10.1115/SMASIS2019-5633

Abstract

View Articletitled, Continuous Operating Elastocaloric Heating and Cooling Device: Air Flow Investigation and Experimental Parameter Study

PDF

Topics: Air flow , Cooling , Heat , Heating and cooling , Shape memory alloys , Flow (Dynamics) , Fluids , Heat transfer , Rotation , Temperature

Pneumatic Artificial Muscle Development and Manufacturing Process and Verification Testing for Space Flight Application

Christopher J. Netwall, James P. Thomas, Michael S. Kubista, Kerry A. Griffith, Christopher Kindle, Jordan Schlater, Joseph T. Hays, Phillip A. Feerst, Norman Wereley

SMASIS 2019; V001T04A019https://doi.org/10.1115/SMASIS2019-5635

Abstract

View Articletitled, Pneumatic Artificial Muscle Development and Manufacturing Process and Verification Testing for Space Flight Application

PDF

Topics: Manufacturing , Muscle , Robotics , Space flight , Testing

Continuous Operating Elastocaloric Heating and Cooling Device: Model-Based Parameter Study With Airflow Losses

Felix Welsch, Susanne-Marie Kirsch, Nicolas Michaelis, Paul Motzki, Andreas Schütze, Stefan Seelecke

SMASIS 2019; V001T04A020https://doi.org/10.1115/SMASIS2019-5636

Abstract

View Articletitled, Continuous Operating Elastocaloric Heating and Cooling Device: Model-Based Parameter Study With Airflow Losses

PDF

Topics: Air flow , Cooling , Heating and cooling , Shape memory alloys , Thermomechanics , Temperature , Computation , Computers , Cooling systems , Cross-flow

Preliminary Experimental Investigation of Control Parameters for the Electroresistive Heating of SMA Knitted Textiles

Rachel Marbaker, Brent Utter, Kevin Eschen, Julianna Abel

SMASIS 2019; V001T04A021https://doi.org/10.1115/SMASIS2019-5666

Abstract

View Articletitled, Preliminary Experimental Investigation of Control Parameters for the Electroresistive Heating of SMA Knitted Textiles

PDF

Topics: Heating , Textiles , Cycles , Electrodes , Heat , Aerospace industry , Biomedicine , Circuits , Currents , Design

Morphing Airfoil Design via L-System Generated Topology Optimization

Madalyn Mikkelsen, Michayal Mathew, Patrick Walgren, Brent Bielefeldt, Pedro B. C. Leal, Darren Hartl, Andres Arrieta

SMASIS 2019; V001T04A022https://doi.org/10.1115/SMASIS2019-5695

Abstract

View Articletitled, Morphing Airfoil Design via L-System Generated Topology Optimization

PDF

Topics: Airfoils , Design , Optimization , Topology , Actuators , Fluid structure interaction , Shape memory alloys , Stress , Structural elements (Construction) , Tradeoffs

Design and Manufacturing of a Multi-Stable Selectively Stiff Morphing Section Demonstrator

D. Matthew Boston, Jose R. Rivas-Padilla, Andres F. Arrieta

SMASIS 2019; V001T04A023https://doi.org/10.1115/SMASIS2019-5706

Abstract

View Articletitled, Design and Manufacturing of a Multi-Stable Selectively Stiff Morphing Section Demonstrator

PDF

Topics: Design , Manufacturing , Wings , Stiffness , Additive manufacturing , Aircraft , Deflection , Load bearing capacity , Shapes , Tradeoffs

Structural Health Monitoring

Design of a Probabilistic Health Monitoring System Using Embedded Piezoelectric Patch Sensors

Amin Toghi Eshghi, Soobum Lee, HyunJun Jung, Pingfeng Wang

SMASIS 2019; V001T05A001https://doi.org/10.1115/SMASIS2019-5506

Abstract

View Articletitled, Design of a Probabilistic Health Monitoring System Using Embedded Piezoelectric Patch Sensors

PDF

Topics: Design , Monitoring systems , Sensors , Failure , Structural health monitoring , Vibration , Failure mechanisms , Finite element analysis , Modeling , Screws

Development of a Structural Health Monitoring Methodology in Reinforced Concrete Structures Using FBGs and Pattern Recognition Techniques

Alejandra Amaya, Joham Alvarez-Montoya, Julián Sierra-Pérez

SMASIS 2019; V001T05A002https://doi.org/10.1115/SMASIS2019-5517

Abstract

View Articletitled, Development of a Structural Health Monitoring Methodology in Reinforced Concrete Structures Using FBGs and Pattern Recognition Techniques

PDF

Topics: Damage , Fiber Bragg gratings , Pattern recognition , Reinforced concrete , Structural health monitoring

Evaluation of SHM With the Electromechanical Impedance Method Using a High Voltage Excitation Signal in High Frequencies

Eric C. Nolan, Mohsen Safaei, Steven R. Anton

SMASIS 2019; V001T05A003https://doi.org/10.1115/SMASIS2019-5556

Abstract

View Articletitled, Evaluation of SHM With the Electromechanical Impedance Method Using a High Voltage Excitation Signal in High Frequencies

PDF

Topics: Excitation , Signals , Structural health monitoring

Structural Health Monitoring of Composite Structures via Machine Learning of Mechanoluminescence

Sujasha Gupta, Srivatsava Krishnan, Vishnubaba Sundaresan

SMASIS 2019; V001T05A004https://doi.org/10.1115/SMASIS2019-5697

Abstract

View Articletitled, Structural Health Monitoring of Composite Structures via Machine Learning of Mechanoluminescence

PDF

Topics: Composite materials , Machine learning , Structural health monitoring

Bioinspired Smart Materials and Systems

Photo-Triggered Soft Materials With Differentiated Diffusive Pathways

Michelle M. Makhoul-Mansour, Eric C. Freeman

SMASIS 2019; V001T06A001https://doi.org/10.1115/SMASIS2019-5525

Abstract

View Articletitled, Photo-Triggered Soft Materials With Differentiated Diffusive Pathways

PDF

Topics: Diffusion (Physics) , Drops , Lipid bilayers , Polymerization , Signals , Ultraviolet radiation

A Three-Row Opposed Gripping Mechanism With Radial Configuration for Wall-Climbing Robots

Chao Xie, Xuan Wu, Xiaojie Wang

SMASIS 2019; V001T06A002https://doi.org/10.1115/SMASIS2019-5549

Abstract

View Articletitled, A Three-Row Opposed Gripping Mechanism With Radial Configuration for Wall-Climbing Robots

PDF

Topics: Robots , Linkages , Surface roughness , Gears , Grippers , Motor drives , Stress , Trajectories (Physics)

Design and Testing of a Wall-Climbing Robot With Under-Actuated Force Adjusting Mechanism

Xuan Wu, Hong Liu, Xiaojie Wang

SMASIS 2019; V001T06A003https://doi.org/10.1115/SMASIS2019-5553

Abstract

View Articletitled, Design and Testing of a Wall-Climbing Robot With Under-Actuated Force Adjusting Mechanism

PDF

Topics: Adhesives , Biomimetics , Design , Robots , Testing

Analytical Modeling and Simulation of the Blocked Force and Large Deformation of Multifunctional Segmented Lithium Ion Battery Unimorph Actuator

Cody Gonzalez, Jun Ma, Mary Frecker, Christopher Rahn

SMASIS 2019; V001T06A004https://doi.org/10.1115/SMASIS2019-5560

Abstract

View Articletitled, Analytical Modeling and Simulation of the Blocked Force and Large Deformation of Multifunctional Segmented Lithium Ion Battery Unimorph Actuator

PDF

Topics: Actuators , Deformation , Lithium-ion batteries , Modeling , Simulation , Deflection , Stiffness , Energy storage , Finite element analysis

Versatile Layering Approach to Pneumatic Soft Actuator Manufacturing

Emily A. Allen, John P. Swensen

SMASIS 2019; V001T06A005https://doi.org/10.1115/SMASIS2019-5561

Abstract

View Articletitled, Versatile Layering Approach to Pneumatic Soft Actuator Manufacturing

PDF

Topics: Actuators , Manufacturing , Fibers , Pneumatic actuators , Design , Shear (Mechanics) , Silicones

Initial Analysis of a Novel Biomimetic Span-Wise Morphing Wing Concept

Benjamin J. Stacey, Peter Thomas

SMASIS 2019; V001T06A006https://doi.org/10.1115/SMASIS2019-5567

Abstract

View Articletitled, Initial Analysis of a Novel Biomimetic Span-Wise Morphing Wing Concept

PDF

Topics: Biomimetics , Wings , Design , Actuators , Aircraft , Computational fluid dynamics , Flight , Materials science , Muscle , Plates (structures)

DNA Nanotechnologies for the Design of Bio-Inspired Soft Nanocomposites With Reversible Rigidity

Theo Calais, Thileepan Stalin, Vincent S. Joseph, Pablo Valdivia y Alvarado

SMASIS 2019; V001T06A007https://doi.org/10.1115/SMASIS2019-5568

Abstract

View Articletitled, DNA Nanotechnologies for the Design of Bio-Inspired Soft Nanocomposites With Reversible Rigidity

PDF

Topics: Biomimetics , Design , DNA , Nanocomposites , Nanotechnology , Seas , Stiffness

Target Shape Optimization of 3D Compliant Mechanism With Superelastic Joints and Shape Memory Actuation

Jovana Jovanova, Angela Nastevska, Mary Frecker

SMASIS 2019; V001T06A008https://doi.org/10.1115/SMASIS2019-5639

Abstract

View Articletitled, Target Shape Optimization of 3D Compliant Mechanism With Superelastic Joints and Shape Memory Actuation

PDF

Topics: Compliant mechanisms , Nickel titanium alloys , Optimization , Shape optimization , Shapes

Memcapacitive Devices in Neuromorphic Circuits via Polymeric Biomimetic Membranes

Colin Basham, Megan Pitz, Joseph Najem, Stephen Sarles, Md Sakib Hasan

SMASIS 2019; V001T06A009https://doi.org/10.1115/SMASIS2019-5648

Abstract

View Articletitled, Memcapacitive Devices in Neuromorphic Circuits via Polymeric Biomimetic Membranes

PDF

Topics: Biomimetics , Circuits , Membranes , Plasticity , Smart materials , Biocompatibility , Brain , Capacitance , Capacitors , Lipid bilayers

DfAM of Nonlinear Cellular Flexible Structures

Jelena Djokikj, Jovana Jovanova

SMASIS 2019; V001T06A010https://doi.org/10.1115/SMASIS2019-5673

Abstract

View Articletitled, DfAM of Nonlinear Cellular Flexible Structures

PDF

Topics: Additive manufacturing , Computer software , Computer-aided design , Design , Flexible structures , Geometry , Manufacturing , Modeling , Shapes , Skin

Smart Material Actuation of Multi-Locomotion Robot

Jovana Jovanova, Simona Domazetovska, Vasko Changoski

SMASIS 2019; V001T06A011https://doi.org/10.1115/SMASIS2019-5675

Abstract

View Articletitled, Smart Material Actuation of Multi-Locomotion Robot

PDF

Topics: Biomimetics , Robots , Smart materials

Modeling and Prototyping of Self-Folding Origami Structure

Jovana Jovanova, Simona Domazetovska, Vasko Changoski

SMASIS 2019; V001T06A012https://doi.org/10.1115/SMASIS2019-5676

Abstract

View Articletitled, Modeling and Prototyping of Self-Folding Origami Structure

PDF

Topics: Active materials , Actuators , Additive manufacturing , Biomimetics , Compliant mechanisms , Design , Geometry , Mechanical engineering , Modeling , Packaging

Towards Highly Reconfigurable Carbon Fiber Composite

Arnaldo Casalotti, Giulia Lanzara, Matthew P. Snyder

SMASIS 2019; V001T06A013https://doi.org/10.1115/SMASIS2019-5677

Abstract

View Articletitled, Towards Highly Reconfigurable Carbon Fiber Composite

PDF

Topics: Carbon fibers , Composite materials , Shapes , Stiffness , Advanced materials , Fibers , Mechanical testing , Smart materials , Temperature , Thermomechanics

Exfoliated-Graphite/Latex Piezoresistive System for Mapping Plantar Pressure

Allison Riegel, Jonathan Gray, Ephraim F. Zegeye

SMASIS 2019; V001T06A014https://doi.org/10.1115/SMASIS2019-5696

Abstract

View Articletitled, Exfoliated-Graphite/Latex Piezoresistive System for Mapping Plantar Pressure

PDF

Topics: Graphite , Latex , Pressure , Pressure sensors , Sensors

Strain Mapping and Large Strain Measurement Using Biaxial Skin Sensors

Thomas Donica, Jonathan Gray, Ephraim F. Zegeye

SMASIS 2019; V001T06A015https://doi.org/10.1115/SMASIS2019-5698

Abstract

View Articletitled, Strain Mapping and Large Strain Measurement Using Biaxial Skin Sensors

PDF

Topics: Graphite , Sensors , Skin , Strain measurement , Strain sensors , Tensile testing , Latex , Strips , Biomedicine , Deformation

Totipotent Cellularly-Inspired Materials

Samuel I. Mattern-Schain, Mary-Anne Nguyen, Tayler M. Schimel, James Manuel, Joshua Maraj, Donald Leo, Eric Freeman, Scott Lenaghan, Stephen A. Sarles

SMASIS 2019; V001T06A016https://doi.org/10.1115/SMASIS2019-5745

Abstract

View Articletitled, Totipotent Cellularly-Inspired Materials

PDF

Topics: Absorption , Biological tissues , Bioreactors , Design , Drops , Electrical conductivity , Electrophysiology , Fluorescence , Machinery , Materials properties

Energy Harvesting

Miniaturized Broadband Vibration Energy Harvester With Piecewise-Linear Asymmetric Restoring Force

Arata Masuda, Feng Zhao

SMASIS 2019; V001T07A001https://doi.org/10.1115/SMASIS2019-5616

Abstract

View Articletitled, Miniaturized Broadband Vibration Energy Harvester With Piecewise-Linear Asymmetric Restoring Force

PDF

Topics: Energy harvesting , Vibration , Magnets , Resonance , Springs , Composite materials , Shapes , Cylinders , Deformation , Design

Energy Harvesting From the Vibration and Rotation of Host Systems Using Piezoelectric Devices

Christopher G. Cooley

SMASIS 2019; V001T07A002https://doi.org/10.1115/SMASIS2019-5629

Abstract

View Articletitled, Energy Harvesting From the Vibration and Rotation of Host Systems Using Piezoelectric Devices

PDF

Topics: Energy harvesting , Rotation , Vibration , Excitation , Dynamic response , Tires

A Wearable Biomedical Motion Sensor Employing a Vibration Energy Harvester

Hesam Sharghi, Jean-François Daneault, Onur Bilgen

SMASIS 2019; V001T07A003https://doi.org/10.1115/SMASIS2019-5634

Abstract

View Articletitled, A Wearable Biomedical Motion Sensor Employing a Vibration Energy Harvester

PDF

Topics: Biomedicine , Energy harvesting , Sensors , Vibration , Battery life , Batteries , Cycles , Design , Diseases , Electronics

Controlled Operation of Lithium Ion Batteries Using Reversible Shutdown Membrane Separators

Travis Hery, Vishnu Baba Sundaresan

SMASIS 2019; V001T07A004https://doi.org/10.1115/SMASIS2019-5650

Abstract

View Articletitled, Controlled Operation of Lithium Ion Batteries Using Reversible Shutdown Membrane Separators

PDF

Topics: Lithium-ion batteries , Membranes , Anodes , Transistors

Structure Integrated Supercapacitors for Space Applications

Sebastian Geier, Jan Petersen, Peter Wierach

SMASIS 2019; V001T07A005https://doi.org/10.1115/SMASIS2019-5687

Abstract

View Articletitled, Structure Integrated Supercapacitors for Space Applications

PDF

Topics: Energy storage , Ultracapacitors

Emerging Technologies

An Electrical Impedance Tomography Drive Pattern for Fast and Accurate Gesture Recognition With Less Electrodes

Gang Ma, Zhiliang Hao, Xuan Wu, Xiaojie Wang

SMASIS 2019; V001T08A001https://doi.org/10.1115/SMASIS2019-5550

Abstract

View Articletitled, An Electrical Impedance Tomography Drive Pattern for Fast and Accurate Gesture Recognition With Less Electrodes

PDF

Topics: Electrodes , Extended irreversible thermodynamics , Feature selection , Impedance (Electricity) , Tradeoffs

Evaluating Fretting Wear on 3D-Printed α-, β-, γ- Additives Hybridized NiTi Shape Memory Alloy

O. P. Bodunde, S. M. Gao, M. Qin, W. H. Liao

SMASIS 2019; V001T08A002https://doi.org/10.1115/SMASIS2019-5597

Abstract

View Articletitled, Evaluating Fretting Wear on 3D-Printed α-, β-, γ- Additives Hybridized NiTi Shape Memory Alloy

PDF

Topics: Additive manufacturing , Nickel titanium alloys , Wear

Quantitative Measurement of Thin Film Adhesion Force

Li-Chih Tsai, Maysam Rezaee, Muhammad Istiaque Haider, Armin Yazdi, Nathan P. Salowitz

SMASIS 2019; V001T08A003https://doi.org/10.1115/SMASIS2019-5615

Abstract

View Articletitled, Quantitative Measurement of Thin Film Adhesion Force

PDF

Topics: Adhesion , Adhesives , Thin films

Production and Characterization of a Fully 3D Printed Flexible Bellows Actuator

Alfonso Costas, Brittany Newell, Jose Garcia

SMASIS 2019; V001T08A004https://doi.org/10.1115/SMASIS2019-5644

Abstract

View Articletitled, Production and Characterization of a Fully 3D Printed Flexible Bellows Actuator

PDF

Topics: Actuators , Additive manufacturing , Bellows (Equipment) , Printing , Cylinders , Deformation , Design , Displacement , Dynamic response , Modeling

3D Printed Segmented Flexible Pneumatic Actuator

David Gonzalez, Jose Garcia, Brittany Newell

SMASIS 2019; V001T08A005https://doi.org/10.1115/SMASIS2019-5645

Abstract

View Articletitled, 3D Printed Segmented Flexible Pneumatic Actuator

PDF

Topics: Actuators , Additive manufacturing , Pneumatic actuators

Experimental Investigation of the Mechanisms and Performance of Active Auxetic and Shearing Textiles

Rachael Granberry, Brad Holschuh, Julianna Abel

SMASIS 2019; V001T08A006https://doi.org/10.1115/SMASIS2019-5661

Abstract

View Articletitled, Experimental Investigation of the Mechanisms and Performance of Active Auxetic and Shearing Textiles

PDF

Topics: Die cutting , Shape memory alloys , Shearing (Deformation) , Smart materials , Textiles

Perceived Value Change via 3D Printed Bistable Structures

Wan Kyn Chan, Katherine S. Riley, Andres F. Arrieta

SMASIS 2019; V001T08A007https://doi.org/10.1115/SMASIS2019-5694

Abstract

View Articletitled, Perceived Value Change via 3D Printed Bistable Structures

PDF

Topics: Additive manufacturing , Design , Shapes , Temperature , Deflection , Deformation , Finite element analysis , Image processing , Printing , Robotics

All Years

Proceedings Papers

Development and Characterization of Multifunctional Materials

Mechanics and Behavior of Active Materials

Modeling, Simulation, and Control of Adaptive Systems

Integrated System Design and Implementation

Structural Health Monitoring

Bioinspired Smart Materials and Systems

Energy Harvesting

Emerging Technologies

Email alerts

Most Read Proceedings Papers in SMASIS

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only