Skip Nav Destination
Proceedings Papers
ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 2
Multifunctional Materials
Use of Multiple SMA Wires for Morphing of Inflatable Wings
SMASIS 2010; 7-16https://doi.org/10.1115/SMASIS2010-3606
Topics:
Wings
,
Wire
,
Testing
,
Design
,
Flight
,
Unmanned aerial vehicles
,
Actuators
,
Shape memory alloys
,
Shapes
,
Wind tunnels
Analysis of the Mechanical and Electrical Performance of Conformal Load-Bearing Antenna Structure
SMASIS 2010; 17-20https://doi.org/10.1115/SMASIS2010-3625
Topics:
Bearings
,
Honeycomb structures
,
Stress
,
Finite element methods
,
Deformation
,
Finite element analysis
,
Sandwich structures
,
Strips
Dynamic Characterization of a Magnetoelectric Cantilever for Actuation and Sensing
SMASIS 2010; 27-32https://doi.org/10.1115/SMASIS2010-3641
Topics:
Cantilevers
,
Actuators
,
Composite materials
,
Design
,
Equations of motion
,
Frequency response
,
Gallium
,
Iron
,
Piezoelectric materials
,
Variational principles
Feasibility of Using Piezoelectric Probes to Measure Viscosity in Newtonian Fluids
SMASIS 2010; 47-52https://doi.org/10.1115/SMASIS2010-3688
Topics:
Fluids
,
Probes
,
Viscosity
,
Sensors
,
Actuators
,
Composite materials
,
Fluid dynamics
,
Modeling
,
Phase shift
,
Signals
Numerical Prediction of Effective Transformation Properties of Hybrid SMA-Ceramic Composites
SMASIS 2010; 97-104https://doi.org/10.1115/SMASIS2010-3748
Topics:
Ceramics
,
Composite materials
,
Metals
,
Cermets
,
Design
,
Mechanical properties
,
Phase diagrams
,
Phase transitions
,
Shape memory alloys
,
Stress
Healing of Microsphere Cores in Sandwich Composites
SMASIS 2010; 115-119https://doi.org/10.1115/SMASIS2010-3765
Topics:
Composite materials
,
Binders (Materials)
,
Compression
,
Cooling
,
Cracking (Materials)
,
Cycles
,
Fracture (Process)
,
Glass
,
Heating
,
Maintenance
Development of Modeling Techniques for Damping Applications of Nano Structured Composites With High Aspect Ratio Fillers
SMASIS 2010; 153-159https://doi.org/10.1115/SMASIS2010-3795
Topics:
Composite materials
,
Damping
,
Fillers (Materials)
,
Modeling
,
Carbon
,
Design
,
Geometry
,
Aerospace industry
,
Density
,
Nanofibers
Sensor Behavior of Magneto-Rheological Elastomers
SMASIS 2010; 181-188https://doi.org/10.1115/SMASIS2010-3826
Topics:
Elastomers
,
Rheology
,
Sensors
,
Magnetic fields
,
Actuators
,
Composite materials
,
Fillers (Materials)
,
Hardening (Curing)
,
Iron
,
Particulate matter
Magnetic Properties of Ferrogels
SMASIS 2010; 189-193https://doi.org/10.1115/SMASIS2010-3829
Topics:
Actuators
,
Deformation
,
Design
,
Ethanol
,
Excitation
,
Fillers (Materials)
,
Iron
,
Magnetic fields
,
Magnetization
,
Particulate matter
Enhanced Electromechanical Responses of IPCNC Actuators
Yang Liu, Sheng Liu, Hulya Cebeci, Roberto G. de Villoria, Jun-Hong Lin, Brian L. Wardle, Q. M. Zhang
SMASIS 2010; 195-203https://doi.org/10.1115/SMASIS2010-3832
Topics:
Actuators
,
Electrodes
,
Carbon nanotubes
,
Composite materials
,
Polymers
,
Anisotropy
,
Electrical measurement
,
Heat conduction
,
Polymer composites
Practical Implementation of Resistance Feedback Measurement for Position Control of a Flexible Smart Inhaler Nozzle
SMASIS 2010; 205-213https://doi.org/10.1115/SMASIS2010-3840
Topics:
Feedback
,
Nozzles
,
Position control
,
Wire
,
Actuators
,
Sensors
,
Drugs
,
Deformation
,
Flow (Dynamics)
,
Adaptive structures
Performance Metrics for Structural Composite Capacitiors
SMASIS 2010; 215-221https://doi.org/10.1115/SMASIS2010-3873
Topics:
Composite materials
,
Capacitors
,
Design
,
Stiffness
,
Energy storage
Structural Characteristics of Nanocomposites Fabricated With In-Situ Particle Synthesis Method
Enis Tuncer, Isidor Sauers, D. Randy James, Georgios Polizos, Alvin R. Ellis, Karren I. More, Claudia Cantoni
SMASIS 2010; 251-255https://doi.org/10.1115/SMASIS2010-3898
Topics:
Nanocomposites
,
Particulate matter
,
Nanoparticles
,
Chemistry
,
Insulation
,
Manufacturing
,
Nanotechnology
,
Titanium
Enabling Technologies and Integrated System Design
Actuation Requirements of a Warp Induced Variable Twist Rotor Blade
SMASIS 2010; 265-285https://doi.org/10.1115/SMASIS2010-3615
Topics:
Blades
,
Rotors
,
Warping
,
Skin
,
Engineering prototypes
,
Finite element model
,
Spar platforms
,
Stiffness
,
Torsion
,
Wing spars
System Design and Modeling of a Thermally Activated Reconfigurable Wing
SMASIS 2010; 293-301https://doi.org/10.1115/SMASIS2010-3636
Topics:
Design
,
Modeling
,
Wings
,
Thermal energy
,
Aircraft
,
Energy resources
,
Energy transformation
,
Heat pipes
,
Heating
,
Thermal systems
Active Vibration Isolation System Using the Piezoelectric Unimorph With Mechanically Pre-Stressed Substrate
SMASIS 2010; 309-314https://doi.org/10.1115/SMASIS2010-3651
Topics:
Vibration isolation
,
Actuators
,
Pumps
,
Feedback
,
Vibration control
,
Jitter
,
Vibration
,
Vibration tests
,
Analog circuits
,
Batteries
Multidisciplinary Design Optimization of Actuator Arrangements, Lay-Up Configurations and Control Systems for Smart Laminated Composite Structures
SMASIS 2010; 315-321https://doi.org/10.1115/SMASIS2010-3661
Topics:
Actuators
,
Composite materials
,
Control systems
,
Design
,
Optimization
,
Piezoelectric actuators
,
Vibration suppression
,
Epoxy adhesives
,
Epoxy resins
,
Feedback
Design of Extendable Chord Sections for Morphing Helicopter Rotor Blades
SMASIS 2010; 323-336https://doi.org/10.1115/SMASIS2010-3668
Topics:
Blades
,
Chords (Trusses)
,
Design
,
Rotors
,
Skin
,
Deformation
,
Spar platforms
,
Wing spars
,
Finite element analysis
,
Flight
Design, Manufacturing and Test of a High Lift Secondary Flight Control Surface With SMAPBP (Shape Memory Alloy Post-Buckled Precompressed) Actuators
SMASIS 2010; 337-348https://doi.org/10.1115/SMASIS2010-3681
Topics:
Actuators
,
Design
,
Flight
,
Manufacturing
,
Shape memory alloys
,
Airfoils
,
Stress
,
Aircraft
,
Piezoelectric ceramics
,
Chords (Trusses)
Pareto Optimization Based Tradeoff Between the Controllable Damping Force and the Relative Displacement Sensing of a Self-Sensing Magnetorheological Damper
SMASIS 2010; 355-369https://doi.org/10.1115/SMASIS2010-3716
Topics:
Dampers
,
Damping
,
Displacement
,
Pareto optimization
,
Tradeoffs
,
Actuators
,
Circuits
,
Computer software
,
Engineering prototypes
,
Finite element methods
Design, Fabrication, and Testing of Meso-Scale Cellular Contact-Aided Compliant Mechanisms
SMASIS 2010; 387-397https://doi.org/10.1115/SMASIS2010-3743
Topics:
Compliant mechanisms
,
Design
,
Manufacturing
,
Testing
,
Stainless steel
,
Deformation
,
Composite materials
,
Elastic moduli
,
Stress
,
Tensile testing
Adaptive Resetting of SMA-Actuators
SMASIS 2010; 399-404https://doi.org/10.1115/SMASIS2010-3749
Topics:
Actuators
,
Springs
,
Design
,
Brakes
,
Heating
,
Power density
,
Shape memory alloys
,
Simulation
,
Steel
,
Stress
Optimisation of an SMA-Based Morphing Architecture
SMASIS 2010; 419-425https://doi.org/10.1115/SMASIS2010-3783
Topics:
Actuators
,
Adaptive structures
,
Aerodynamics
,
Aerospace engineering
,
Aircraft
,
Architecture
,
Bearings
,
Deformation
,
Optimization
,
Smart structures
Novel Flexible Pivot With Large Angular Range and Small Center Shift to be Integrated Into a Bio-Inspired Robotic Hand
SMASIS 2010; 427-431https://doi.org/10.1115/SMASIS2010-3784
Topics:
Biomimetics
,
End effectors
,
Degrees of freedom
,
Design
,
Engineering prototypes
,
Friction
,
Robotics
,
Rotation
Sensitivity of Magnetorheological Damper Behavior to Perturbations in Temperature
SMASIS 2010; 433-439https://doi.org/10.1115/SMASIS2010-3802
Topics:
Dampers
,
Temperature
,
Damping
,
Stiffness
,
Algebra
,
Curve fitting
,
Heating
,
Materials testing
,
Operating temperature
,
Pistons
Development of a 6-Channel Power Controller for Simultaneous Actuation and Resistance Measurement of SMA Wires
SMASIS 2010; 461-470https://doi.org/10.1115/SMASIS2010-3846
Topics:
Control equipment
,
Wire
,
Sensors
,
Actuators
,
Heating
,
Joules
,
Calibration
,
Electric current
,
Electricity (Physics)
,
Excitation
Mitigation of Biodynamic Response to Shock Loads Using Semi-Active Vertically Stroking Crew Seats
SMASIS 2010; 481-490https://doi.org/10.1115/SMASIS2010-3857
Topics:
Shock (Mechanics)
,
Stress
,
Lumped parameter models
,
Control algorithms
,
Dampers
,
Degrees of freedom
,
Equations of motion
,
Shapes
,
Wounds
Customer Tailored Active Weatherstrip Design
SMASIS 2010; 491-502https://doi.org/10.1115/SMASIS2010-3888
Topics:
Design
,
Sealing (Process)
,
Stress
,
Doors
,
Noise (Sound)
,
Tradeoffs
,
Vehicles
,
Water
,
Automobiles
,
Genetic algorithms
Wind Tunnel Testing of a Helicopter Rotor Trailing Edge Flap Actuated via Pneumatic Artificial Muscles
SMASIS 2010; 515-524https://doi.org/10.1115/SMASIS2010-3901
Topics:
Muscle
,
Rotors
,
Testing
,
Wind tunnels
,
Blades
,
Deflection
,
Tunnels
,
Actuators
,
Chords (Trusses)
,
Fluids
High Specific Power Actuators for Robotic Manipulators
SMASIS 2010; 525-534https://doi.org/10.1115/SMASIS2010-3902
Topics:
Actuators
,
Manipulators
,
Robotics
,
Torque
,
Braid (Textile)
,
Engineering prototypes
,
Modeling
,
Motors
,
Muscle
,
Pressure
Shear Morphing Skins: Simulation and Testing of Optimized Design
SMASIS 2010; 535-549https://doi.org/10.1115/SMASIS2010-3913
Topics:
Design
,
Shear (Mechanics)
,
Simulation
,
Testing
,
Manufacturing
,
Modeling
,
Aluminum
,
Skin
,
Stress
,
Aircraft
Structural Health Monitoring/NDE
Vibration Measurements for Membrane Structures by Using Laser Excitation System
SMASIS 2010; 559-564https://doi.org/10.1115/SMASIS2010-3617
Topics:
Excitation systems
,
Lasers
,
Membranes
,
Vibration measurement
,
Vibration
,
Impulse (Physics)
,
Damage
,
Monitoring systems
,
Excitation
,
Fluctuations (Physics)
Multi-Location Actuators and Piezoceramic Based 2-D Spiral Array for Structural Health Monitoring: Thin Isotropic Panels
SMASIS 2010; 609-617https://doi.org/10.1115/SMASIS2010-3723
Topics:
Actuators
,
Piezoelectric ceramics
,
Structural health monitoring
,
Damage
,
Fracture (Materials)
,
Reflection
,
Sensors
,
Signal processing
,
Waves
Microwave Antenna Sensors for Fatigue Crack Monitoring Under Lap Joints
SMASIS 2010; 619-625https://doi.org/10.1115/SMASIS2010-3744
Topics:
Fatigue cracks
,
Microwaves
,
Sensors
,
Design
,
Aerospace industry
,
Fatigue
,
Fracture (Materials)
,
Inspection
,
Weight (Mass)
Structural Health Monitoring as an Enabler for Responsive Satellites: An Update
SMASIS 2010; 633-640https://doi.org/10.1115/SMASIS2010-3747
Topics:
Satellites
,
Structural health monitoring
,
Air Force
,
Maintenance
,
Risk
,
Sensors
,
Space vehicles
,
Technology development
,
Testing
,
Weight (Mass)
Modeling Ultrasonic Guided Wave Generation From Piezoelectric Fiber Composite Strip Actuators
SMASIS 2010; 657-665https://doi.org/10.1115/SMASIS2010-3771
Topics:
Actuators
,
Composite materials
,
Fibers
,
Modeling
,
Strips
,
Waves
,
Design
,
Maintenance
,
Structural health monitoring
,
Finite element analysis
Proper Othrogonal Decomposition of Collocated Signals for Detection of Damage in an Aircraft Propeller
SMASIS 2010; 711-717https://doi.org/10.1115/SMASIS2010-3820
Topics:
Aircraft
,
Damage
,
Propellers
,
Signals
,
Blades
,
Impulse (Physics)
,
Spatiotemporal phenomena
,
Principal component analysis
,
Sensors
,
Transients (Dynamics)
Fatigue Life Monitoring of Metallic Structures by Decentralized Rainflow Counting Embedded in a Wireless Sensor Network
SMASIS 2010; 751-759https://doi.org/10.1115/SMASIS2010-3839
Topics:
Fatigue life
,
Wireless sensor networks
,
Fatigue
,
Sensors
,
Cracking (Materials)
,
Cycles
,
Damage
,
Fracture (Process)
,
Aluminum
,
Bridges (Structures)
Canaries Development via Combinatorial Materials Science Techniques for Prognostics and Health Management in Electronics Systems
SMASIS 2010; 761-768https://doi.org/10.1115/SMASIS2010-3860
Topics:
Electronics
,
Materials science
,
Cycles
,
Errors
,
Failure
,
Design
,
Fault tolerant computing
,
Hardware
Diagnostic/Prognostic Experiments for Capacitor Degradation and Health Monitoring in DC-DC Converters
SMASIS 2010; 775-781https://doi.org/10.1115/SMASIS2010-3862
Topics:
Capacitors
,
Avionics
,
Currents
,
Aircraft
,
Capacitance
,
Electronic components
,
Errors
,
Failure
,
Navigation
,
Power converters
Prognostics of Embedded Planar Capacitors Under Temperature and Voltage Aging
SMASIS 2010; 783-792https://doi.org/10.1115/SMASIS2010-3864
Topics:
Capacitors
,
Temperature
,
Failure
,
Failure mechanisms
,
Insulation
,
Capacitance
,
Laminates
,
Printed circuit boards
,
Composite materials
,
Energy dissipation
Damage Self-Diagnosis in Carbon Fiber-Reinforced Composites Under Fatigue Loading
SMASIS 2010; 797-799https://doi.org/10.1115/SMASIS2010-3870
Topics:
Carbon
,
Damage
,
Fatigue
,
Fiber reinforced composites
,
Probes
,
Delamination
,
Composite materials
,
Fracture (Materials)
,
Cantilever beams
,
Carbon fibers
Damage Tracking Using Smart Sensor Network
SMASIS 2010; 801-806https://doi.org/10.1115/SMASIS2010-3876
Topics:
Damage
,
Sensor networks
,
Sensors
,
Structural health monitoring
,
Aerospace industry
,
Chaos
,
Crack propagation
,
Steel
Correlating Shear Slip and Contact Pressure for Health Monitoring of Bolted Joints in Aerospace Structures
SMASIS 2010; 807-812https://doi.org/10.1115/SMASIS2010-3885
Topics:
Aerospace industry
,
Bolted joints
,
Pressure
,
Shear (Mechanics)
,
Structural health monitoring
,
Aircraft
,
Damage
,
Satellites
,
Torque
Analysis of Fiber Bragg Grating Spectral Features for In-Situ Assessment of Sandwich Composites
SMASIS 2010; 813-820https://doi.org/10.1115/SMASIS2010-3886
Topics:
Composite materials
,
Fiber Bragg gratings
,
Sensors
,
Laminates
,
Stress
,
Damage
,
Delamination
,
Fracture (Materials)
,
Hardening (Curing)
,
Signals
Metal-Core Piezoelectric Fibers for the Detection of Lamb Waves
SMASIS 2010; 821-829https://doi.org/10.1115/SMASIS2010-3914
Topics:
Fibers
,
Metals
,
Waves
,
Sensors
,
Actuators
,
Aluminum plate
,
Piezoelectric ceramics
,
Piezoelectricity
,
Structural health monitoring
,
Transducers
Email alerts
Most Read Proceedings Papers in SMASIS
SMASIS2024 Front Matter
SMASIS2024