Skip Nav Destination
Proceedings Papers
ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1
Active Materials, Mechanics and Behavior
Stress-Induced Martensitic Phase Transformation in Nitinol Under Hard Cyclic Loading
SMASIS 2010; 1-7https://doi.org/10.1115/SMASIS2010-3609
Topics:
Nickel titanium alloys
,
Phase transitions
,
Stress
,
Cycles
,
Dislocations
,
Infrared imaging
,
Latent heat
,
Nickel
,
Shape memory alloys
,
Thermomechanics
Performance Evaluation of the Pre-Stressed Piezoelectric Unimorph Using Nonlinear Piezoelectric Properties
SMASIS 2010; 33-39https://doi.org/10.1115/SMASIS2010-3650
Topics:
Actuators
,
Elastic moduli
,
Electric fields
,
Materials properties
,
Performance evaluation
,
Piezoelectric actuators
,
Pumps
,
Stress
A Ferromagnetic Shape Memory Foil Actuator
SMASIS 2010; 41-48https://doi.org/10.1115/SMASIS2010-3652
Topics:
Actuators
,
Shapes
,
Stress
,
Crystals
,
Cycles
,
Engineering simulation
,
Finite element analysis
,
Gibbs' free energy
,
Lithography
,
Magnetic fields
The Strain Rate- and Temperature-Dependent Mechanical Behavior of Veriflex-E in Tension
SMASIS 2010; 69-78https://doi.org/10.1115/SMASIS2010-3674
Topics:
Mechanical behavior
,
Temperature
,
Tension
,
Creep
,
Deformation
,
Elastic moduli
,
Poisson ratio
,
Resins
,
Shape memory polymers
,
Glass transition
Non-Contact Technique for Characterizing Full-Field Surface Deformation of Shape Memory Polymers
SMASIS 2010; 79-88https://doi.org/10.1115/SMASIS2010-3679
Topics:
Shape memory polymers
,
Surface deformation
,
Lasers
,
Temperature
,
Strain measurement
,
Elastic moduli
,
Strain gages
,
Testing
,
Gages
,
Glass transition
Force Characterization of Hygroscopic Liquid Crystal Elastomers
SMASIS 2010; 89-95https://doi.org/10.1115/SMASIS2010-3690
Topics:
Elastomers
,
Liquid crystals
,
Water vapor
,
Deformation
,
Density
,
Biomedicine
,
Continuum mechanics
,
Deflection
,
Microfluidics
,
Water
Generic Models of Piezo-Actuators and Experimental Validation for Smart Applications
Abdou-Fadel Boukari, George Moraru, Jean-Claude Carmona, Francois Malburet, Ali Chaaba, Mohammed Douimi
SMASIS 2010; 133-143https://doi.org/10.1115/SMASIS2010-3706
Topics:
Piezoelectric actuators
,
Modeling
,
Simulation
,
System dynamics
An Experimental Performance Evaluation of DC Power Generation and Power Loss in Full-Bridge Rectifier of Cantilever Type of Piezoelectric Vibration Energy Harvester
SMASIS 2010; 145-150https://doi.org/10.1115/SMASIS2010-3708
Topics:
Bridges (Structures)
,
Cantilevers
,
Energy generation
,
Energy harvesting
,
Performance evaluation
,
Vibration
,
Machinery
,
Condition monitoring
,
Resonance
,
Waves
Multiphysics Modelling and Design of Shape Memory Alloy Wave Springs as Linear Actuators
SMASIS 2010; 151-159https://doi.org/10.1115/SMASIS2010-3711
Topics:
Actuators
,
Design
,
Modeling
,
Shape memory alloys
,
Springs
,
Waves
,
Shapes
,
Construction
,
Cooling
,
Electrical resistance
Electromechanical Stability of Dielectric Elastomer Using Electric Energy Density Function With Variable Dielectric Constant
SMASIS 2010; 169-170https://doi.org/10.1115/SMASIS2010-3724
Topics:
Density
,
Elastomers
,
Stability
,
Deformation
,
Electric fields
,
Electrical properties
,
Actuators
,
Polymers
,
Aeronautics
,
Bearings
Modeling of Cyclic Response of High Temperature Shape Memory Alloys Undergoing Viscoplastic Mechanisms
SMASIS 2010; 187-192https://doi.org/10.1115/SMASIS2010-3730
Topics:
High temperature
,
Modeling
,
Shape memory alloys
,
Stress
,
Cooling
,
Heating
,
Actuators
,
Alloys
,
Calibration
,
Constitutive equations
Constitutive Modeling of Magneto-Thermo-Mechanical Response of Field-Induced Phase Transformations in NiMnCoIn Magnetic Shape Memory Alloys
SMASIS 2010; 193-201https://doi.org/10.1115/SMASIS2010-3733
Topics:
Modeling
,
Phase transitions
,
Shape memory alloys
,
Magnetic fields
,
Constitutive equations
,
Phase diagrams
,
Stress
,
Temperature
Ionic Polymer Transducer Sensing Response to Shear Deformation
SMASIS 2010; 211-220https://doi.org/10.1115/SMASIS2010-3763
Topics:
Polymers
,
Shear deformation
,
Transducers
,
Actuators
,
Deformation
,
Sensors
Combined AC and DC Energy Harvesting Methods
SMASIS 2010; 237-244https://doi.org/10.1115/SMASIS2010-3778
Characterizing and Modeling the Free Recovery and Constrained Recovery Behavior of a Polyurethane Shape Memory Polymer
SMASIS 2010; 253-260https://doi.org/10.1115/SMASIS2010-3786
Topics:
Modeling
,
Shape memory polymers
,
Urethane elastomers
,
Stress
,
Deformation
,
Glass transition
,
Shapes
,
Compressive stress
,
Cycles
,
Engineering simulation
Towards Self-Sensing of DEAP Actuators: Capacitive Sensing Experimental Analysis
SMASIS 2010; 307-314https://doi.org/10.1115/SMASIS2010-3847
Topics:
Actuators
,
Experimental analysis
,
Sensors
,
Circuits
,
Valves
,
Capacitors
,
Feedback
,
Filters
,
Polymers
,
Weight (Mass)
Thermomechanical Models for NiTi Shape Memory Alloys and Their Applications
SMASIS 2010; 323-329https://doi.org/10.1115/SMASIS2010-3851
Topics:
Nickel titanium alloys
,
Thermomechanics
,
Wire
,
Tension
,
Modeling
,
Stents
,
Textiles
,
Torsion
,
Design
,
Materials properties
A Design Method for Shape Memory Alloy Actuators Accounting for Cyclic Shakedown With Constrained Allowable Strain
SMASIS 2010; 331-342https://doi.org/10.1115/SMASIS2010-3855
Topics:
Accounting
,
Actuators
,
Design methodology
,
Shape memory alloys
,
Design
,
Stress
,
Wire
,
Density
,
Fatigue
,
Fatigue life
Actuation and Charging Characteristics of Ionic Liquid-Ionic Polymer Transducers
SMASIS 2010; 351-365https://doi.org/10.1115/SMASIS2010-3892
Topics:
Polymers
,
Transducers
,
Actuators
,
Boundary layers
,
Capacitance
,
Circuits
,
Density
,
Dynamics (Mechanics)
,
Electrolysis
,
Ions
Aqueous Magnetorheological Suspensions of Composite Carbonyl Iron Particles
SMASIS 2010; 367-372https://doi.org/10.1115/SMASIS2010-3899
Topics:
Composite materials
,
Iron
,
Particulate matter
,
Coating processes
,
Coatings
,
Disks
,
Magnetic fields
,
Magnetometers
,
Rheometers
,
Scanning electron microscopy
Modeling, Simulation and Control
Effects of Transverse Strains on the Measurement of the Thermal Expansion of the Composite Using FBG Sensors
SMASIS 2010; 375-381https://doi.org/10.1115/SMASIS2010-3605
Topics:
Composite materials
,
Fiber Bragg gratings
,
Sensors
,
Thermal expansion
,
Wavelength
,
Diffraction gratings
,
Errors
,
Fibers
,
Finite element methods
Modelling of Wire-on-Drum Shape Memory Actuators for Linear and Rotary Motion
SMASIS 2010; 383-390https://doi.org/10.1115/SMASIS2010-3616
Topics:
Actuators
,
Modeling
,
Shapes
,
Wire
,
Stress
,
Architecture
,
Equilibrium (Physics)
,
Excitation
,
Friction
,
Geometry
On the Development of the En Masse Elimination Algorithm for Actuator Grouping Optimization in Adaptive Structures
SMASIS 2010; 415-420https://doi.org/10.1115/SMASIS2010-3655
Topics:
Actuators
,
Adaptive structures
,
Algorithms
,
Optimization
,
Design
,
Deformation
,
Genetic algorithms
,
Optimization algorithms
,
Smart structures
,
Weight (Mass)
Configuration of Control System for an Adaptive Tensegrity Structure
SMASIS 2010; 443-452https://doi.org/10.1115/SMASIS2010-3673
Topics:
Control systems
,
Tensegrity structures
,
Cables
,
Damage
,
Actuators
,
Bridges (Structures)
,
Design
,
Tensegrity
Fluidic Composite Tunable Vibration Isolators
SMASIS 2010; 461-470https://doi.org/10.1115/SMASIS2010-3683
Topics:
Composite materials
,
Vibration isolators
,
Pressure
,
Fluids
,
Frequency response
,
Geometry
,
Materials properties
,
Stress
,
Vibration
Torsional Behavior of Shape Memory Alloy Tubes for Biomedical Applications
SMASIS 2010; 471-477https://doi.org/10.1115/SMASIS2010-3684
Topics:
Biomedicine
,
Shape memory alloys
,
Alloys
,
Torque
,
Torsion
,
Design
,
Actuators
,
Aerospace industry
,
Blades
,
Compression
Electromechanical Modelling and Experiments of a Bistable Plate for Nonlinear Energy Harvesting
SMASIS 2010; 487-494https://doi.org/10.1115/SMASIS2010-3710
Topics:
Energy harvesting
,
Modeling
,
Composite materials
,
Electromechanical devices
,
Oscillations
,
Resistors
,
Resonance
,
Stress
,
Vibration
Novel Sensor Placement for Damage Identification in a Cracked Complex Structure With Structural Variability
SMASIS 2010; 513-522https://doi.org/10.1115/SMASIS2010-3719
Topics:
Damage
,
Sensor placement
,
Fracture (Materials)
,
Mode shapes
,
Sensors
,
Crack detection
,
Vehicles
,
Algorithms
,
Approximation
,
Geometry
Flow Driven Vibration Energy Harvester
SMASIS 2010; 523-528https://doi.org/10.1115/SMASIS2010-3736
Topics:
Energy harvesting
,
Flow (Dynamics)
,
Vibration
,
Cantilevers
,
Water
,
Wind
,
Deflection
,
Oscillating frequencies
,
Resonance
,
Stress
Concepts for Standardized Shape Memory Actuators for Positioning Applications
SMASIS 2010; 535-541https://doi.org/10.1115/SMASIS2010-3741
Topics:
Actuators
,
Shapes
,
Design
,
Control equipment
,
Displacement
,
Durability
,
Risk
,
Shape memory alloys
,
Simulation
,
Stack design
Modeling of Hysteresis and Backlash Within a Smart Fin With a Piezoelectric Actuator
SMASIS 2010; 543-553https://doi.org/10.1115/SMASIS2010-3746
Topics:
Actuators
,
Bonding
,
Composite materials
,
Damping
,
Dynamic models
,
Dynamics (Mechanics)
,
Fibers
,
Genetic algorithms
,
Modeling
,
Piezoelectric actuators
Position and Force Control of an SMA Spring Based Differential Actuator
SMASIS 2010; 555-564https://doi.org/10.1115/SMASIS2010-3755
Topics:
Actuators
,
Force control
,
Springs
,
Stiffness
,
Damage
,
Damping
,
Deflection
,
Noise (Sound)
,
Shape memory alloys
,
Shock (Mechanics)
Investgation of Wake Effects in Aeroelastic Flutter Vibration Energy Harvesting
SMASIS 2010; 575-582https://doi.org/10.1115/SMASIS2010-3772
Topics:
Energy harvesting
,
Flutter (Aerodynamics)
,
Vibration
,
Wakes
,
Degrees of freedom
,
Design
,
Electric current
,
Flow (Dynamics)
,
Fluid dynamics
,
Limit cycles
Low Frequency Piezoelectric Synthetic Jets
SMASIS 2010; 619-626https://doi.org/10.1115/SMASIS2010-3822
The Effect of Numerical Solution Procedure on the Simulation of Shape Memory Alloy Actuators
SMASIS 2010; 627-635https://doi.org/10.1115/SMASIS2010-3834
Topics:
Actuators
,
Shape memory alloys
,
Simulation
,
Simulation results
,
Modeling
,
Computer simulation
,
Excitation
,
Matlab
,
Nickel titanium alloys
,
Phase transitions
Control of a Shape Memory Alloy Actuator for Mirror Positioning
SMASIS 2010; 647-651https://doi.org/10.1115/SMASIS2010-3893
Topics:
Actuators
,
Mirrors
,
Shape memory alloys
,
Control equipment
,
Automotive industry
,
Brakes
,
Design
,
Friction
,
Rotation
,
Weight (Mass)
Analysis of a Flexible Beam Actuated by Two Active SMA Wires
SMASIS 2010; 661-672https://doi.org/10.1115/SMASIS2010-3904
Topics:
Actuators
,
Modeling
,
Wire
,
Shapes
,
Smart structures
,
Composite materials
,
Constitutive equations
,
Convection
,
Cooling
,
Deflection
Actuators for Smart Applications
SMASIS 2010; 673-679https://doi.org/10.1115/SMASIS2010-3905
Topics:
Actuators
,
Weight (Mass)
,
Blades
,
Displacement
,
Energy consumption
,
Engineering simulation
,
Rotors
,
Simulation
,
Stress
A Bending Mode Galfenol Electric Power Harvester
SMASIS 2010; 681-686https://doi.org/10.1115/SMASIS2010-3909
Topics:
Electricity (Physics)
,
Cantilever beams
,
Engineering prototypes
,
Stress
,
Strips
,
Alloys
,
Aluminum
,
Brass (Metal)
,
Electromagnetic induction
,
Energy efficiency
Bio-Inspired Smart Materials and Structures
Fabrication, Oxidation and Characterization of Shark Skin Inspired Riblet Structures as Aerodynamically Optimized High Temperature Coatings for Blades of Aeroengines
SMASIS 2010; 687-693https://doi.org/10.1115/SMASIS2010-3626
Topics:
Blades
,
Coatings
,
High temperature
,
Manufacturing
,
Oxidation
,
Skin
,
Drag (Fluid dynamics)
,
Electrodeposition
,
Shear stress
,
Compressors
Design of a Passively Morphing Ornithopter Wing Using a Novel Compliant Spine
SMASIS 2010; 703-713https://doi.org/10.1115/SMASIS2010-3637
Topics:
Design
,
Wings
,
Optimization
,
Deflection
,
Kinematics
,
Design methodology
,
Drag reduction
,
Flight
,
Geometry
,
Hinges
Fabrication and Testing of a Simple “Bionic Arm” Demonstrator
SMASIS 2010; 733-739https://doi.org/10.1115/SMASIS2010-3658
Topics:
Bionics
,
Manufacturing
,
Testing
,
Actuators
,
Students
,
Bone
,
Braid (Textile)
,
Composite materials
,
Fibers
,
Muscle
Thrust Modeling and Measurement for Clapping Wing Nano Air Vehicles Actuated by Piezoelectric T-Beams
SMASIS 2010; 749-755https://doi.org/10.1115/SMASIS2010-3664
Topics:
Modeling
,
Thrust
,
Vehicles
,
Wings
,
Actuators
,
Aerodynamics
,
Degrees of freedom
,
Dynamic models
,
Electric motors
,
Engineering prototypes
A Dexterous Surgical Manipulation Tool Using Self-Sensing Magnetoelectric Actuators
SMASIS 2010; 767-771https://doi.org/10.1115/SMASIS2010-3692
Topics:
Actuators
,
Surgery
,
Cantilevers
,
Deflection
,
Magnetic fields
,
Signals
,
Anisotropy
,
Control systems
,
Shapes
Polycation Coated Polymeric Particles as Vehicles of RNA Delivery Into Immune Cells
SMASIS 2010; 773-777https://doi.org/10.1115/SMASIS2010-3714
Topics:
Particulate matter
,
RNA
,
Vehicles
,
Cancer
,
Proteins
,
Tumors
,
Cell membranes
,
Electrophoresis
,
Encryption
,
Flow (Dynamics)
Design and Optimization of Hybrid Compliant Narrow-Gauge Surgical Forceps
SMASIS 2010; 779-788https://doi.org/10.1115/SMASIS2010-3732
Topics:
Design
,
Gages
,
Optimization
,
Surgery
,
Design methodology
,
Stiffness
,
Compliant mechanisms
,
Deformation
,
Endoscopic devices
,
Geometry
Encapsulated Interface Bilayers for Durable Biomolecular Materials
SMASIS 2010; 789-796https://doi.org/10.1115/SMASIS2010-3752
Topics:
Drops
,
Durability
,
Hydrogels
,
Membranes
,
Polymers
,
Proteins
,
Solids
,
Ultraviolet curing
,
Ultraviolet radiation
,
Water
Modeling Bilayer Systems as Electrical Networks
SMASIS 2010; 807-814https://doi.org/10.1115/SMASIS2010-3791
Topics:
Adaptive structures
,
Cell membranes
,
Electric current
,
Electrical conductance
,
Flow (Dynamics)
,
Ions
,
Membranes
,
Modeling
,
Proteins
,
Self-assembly
Precision Extrusion Deposition With Integrated Assisting Cooling to Fabricate 3D Scaffolds
SMASIS 2010; 815-821https://doi.org/10.1115/SMASIS2010-3804
Topics:
Cooling
,
Extruding
,
Melting point
,
Manufacturing
,
Tissue engineering
,
Biological tissues
,
Biopolymers
,
Computer-aided engineering
,
Polymers
,
Compressed air
Smart Self Sealing Pressure Vessels and Structural Panels
SMASIS 2010; 823-828https://doi.org/10.1115/SMASIS2010-3830
Topics:
Pressure vessels
,
Sealing (Process)
,
Structural panels
,
Maintenance
,
Damage
,
Acoustic emissions
,
Capacitance
,
Drilling
,
Leakage
,
Materials science
BATMAV: Development and Testing of a SMA-Based Bio-Inspired Flapping Platform
SMASIS 2010; 853-861https://doi.org/10.1115/SMASIS2010-3853
Topics:
Aerodynamics
,
Aircraft
,
Biomimetics
,
Degrees of freedom
,
Dynamic testing (Engineering)
,
Flight
,
Fluid-dynamic forces
,
Kinematics
,
Membranes
,
Muscle
Tensile Properties of Insect Tracheal Tubes
SMASIS 2010; 863-867https://doi.org/10.1115/SMASIS2010-3859
Topics:
Tensile strength
,
Trachea
,
Machinery
,
Stress
,
Elastic moduli
,
Mechanical properties
,
Oxygen
,
Strain measurement
,
Tensile testing
,
Video cameras
Computational Modeling and Experimental Characterization of Hyperelastic Thin Film NiTi for Neurovascular Microstent Applications
Youngjae Chun, Hsin-yun Chang, Po-Yu Lin, K. P. Mohanchandra, Michael C. Emmons, Myunghoon Seong, Daniel S. Levi, Allan W. Tulloch, Colin Kealey, David A. Rigberg, Peter F. Lawrence, Gregory P. Carman
SMASIS 2010; 869-873https://doi.org/10.1115/SMASIS2010-3890
Design of an SMA Actuated Mechanotransductive Implant for Correcting Short Bowel Syndrome
Brent Utter, Brian Barnes, Jonathan Luntz, Diann Brei, Daniel H. Teitelbaum, Manabu Okawada, Eiichi Miyasaka
SMASIS 2010; 875-892https://doi.org/10.1115/SMASIS2010-3895
Topics:
Design
,
Stress
,
Biological tissues
,
Bearings
,
Biomedicine
,
Displacement
,
Engineering prototypes
,
Geometry
,
Kinematics
,
Packaging