The flying of missile will severely jeopardize the structural integrity in control rod ejection accident. In order to analyze the strength of a new type of shielding plate under control rod drive mechanism (CRDM) missile impact, this article develops the simulation model and conducts the response analysis of the missile under 4 cases. In addition, the strain analysis and evaluation of protection shielding plate at the most dangerous case are performed. The motion analysis of CRDM missile indicates that the fracture at trapezoid thread place as well as the shielding plate rim under impact is most dangerous because the maximum kinetic energy of the impact can be obtained. So only this case should be examined when performing the evaluation of the shielding plate. Stress analysis shows the maximum stress intensity of the shielding plate will exceed the yielding stress and thereby local plasticity will occur. Strain analysis shows that compared with the extension ratio at structural failure, the computed strain still has margin to ensure the shielding plate will not be penetrated. Meanwhile the strain analysis of bolts which fix shielding plate are calculated. The strain level of two bolts are exceed limit and others is relatively low. The shield plate can be firmly fixed. Hence, this new type of the protection shielding plate is capable to prevent the damage of other components by the flying of CRDM missile.
Skip Nav Destination
ASME 2018 Pressure Vessels and Piping Conference
July 15–20, 2018
Prague, Czech Republic
Conference Sponsors:
- Pressure Vessels and Piping Division
ISBN:
978-0-7918-5163-0
PROCEEDINGS PAPER
Dynamic Analysis and Evaluation of Control Rod Device Mechanism Missile Impact on Shielding Plate
Xianhui Ye,
Xianhui Ye
Nuclear Power Institute of China, Chengdu, China
Search for other works by this author on:
Furui Xiong,
Furui Xiong
Nuclear Power Institute of China, Chengdu, China
Search for other works by this author on:
Bin Zheng,
Bin Zheng
Nuclear Power Institute of China, Chengdu, China
Search for other works by this author on:
Naibin Jiang
Naibin Jiang
Nuclear Power Institute of China, Chengdu, China
Search for other works by this author on:
Xianhui Ye
Nuclear Power Institute of China, Chengdu, China
Furui Xiong
Nuclear Power Institute of China, Chengdu, China
Bin Zheng
Nuclear Power Institute of China, Chengdu, China
Naibin Jiang
Nuclear Power Institute of China, Chengdu, China
Paper No:
PVP2018-84351, V03BT03A025; 5 pages
Published Online:
October 26, 2018
Citation
Ye, X, Xiong, F, Zheng, B, & Jiang, N. "Dynamic Analysis and Evaluation of Control Rod Device Mechanism Missile Impact on Shielding Plate." Proceedings of the ASME 2018 Pressure Vessels and Piping Conference. Volume 3B: Design and Analysis. Prague, Czech Republic. July 15–20, 2018. V03BT03A025. ASME. https://doi.org/10.1115/PVP2018-84351
Download citation file:
31
Views
Related Proceedings Papers
Related Articles
Experimental Characterization of Damage Processes in Aluminum AA2024-O
J. Eng. Mater. Technol (July,2010)
Low-Speed Impact Damage in Filament-Wound CFRP Composite Pressure Vessels
J. Pressure Vessel Technol (November,1997)
Determination of Lower-Bound Ductility for AZ31 Magnesium Alloy by Use of the Bulge Specimens
J. Eng. Mater. Technol (July,2007)
Related Chapters
Introductory Information
The Stress Analysis of Cracks Handbook, Third Edition
Understanding the Problem
Design and Application of the Worm Gear
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design